Rename /openembedded/ -> /meta/

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@530 311d38ba-8fff-0310-9ca6-ca027cbcb966

meta/packages/linux-hotplug/files/collie/usbd

@@ -0,0 +1 @@
+usbdmodule="sa1100_bi"

meta/packages/linux-hotplug/files/mmc.agent

@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# H3600 Sleeve hotplug policy agent for Linux 2.4 kernels
+#
+# Kernel NET hotplug params include:
+#	
+#	ACTION=%s [add or remove]
+#	MEDIA=%s
+#	SLOT=%d
+#
+
+. /etc/hotplug/hotplug.functions
+#DEBUG=yes export DEBUG
+
+    echo "Executing $0 action=$ACTION, media=$MEDIA ($SLOT)" > /dev/console
+
+MMC_MOUNT_OPTIONS="-t auto -o sync,noatime"
+
+if [ -f /etc/sysconfig/hotplug ] ; then
+    . /etc/sysconfig/hotplug
+fi
+
+case `uname -r` in
+2.4*)
+    devpath=mmc/part
+    ;;
+*)
+    devpath=mmcblk0p
+    ;;
+esac
+
+if [ "$ACTION" = "add" ] ; then
+    sleep 4
+    echo -n add > /dev/console
+    for n in 1 2 3 4 ; do
+	device=/dev/$devpath$n
+	if [ "$n" = "1" ] ; then
+	    card=/mnt/card
+	else
+	    card=/mnt/card$n
+	fi
+	[ -b $device ] || break
+	echo " flash on $device" > /dev/console
+	[ -d $card ] || mkdir -p $card
+	mount $MMC_MOUNT_OPTIONS $device $card
+    done
+
+else
+    for card in /mnt/card*; do
+	umount $card
+    done
+fi

meta/packages/linux-hotplug/files/sleeve.agent

@@ -0,0 +1,120 @@
+#!/bin/sh
+#
+# H3600 Sleeve hotplug policy agent for Linux 2.4 kernels
+#
+# Kernel NET hotplug params include:
+#	
+#	ACTION=%s [add or remove]
+#	VENDOR_ID=%s
+#	DEVICE_ID=%x
+#	DEVICE_NAME=%s
+#
+
+. /etc/hotplug/hotplug.functions
+#DEBUG=yes export DEBUG
+
+if [ "$DEBUG" != "" ]; then
+    mesg "Executing $0 action=$ACTION, device=$DEVICE_NAME ($VENDOR_ID,$DEVICE_ID)"
+fi
+
+COMPACTFLASH_TIMING_INCREMENT=0
+PCMCIA_TIMING_INCREMENT=0
+DUAL_PCMCIA_TIMING_INCREMENT=0
+NAVMAN_TIMING_INCREMENT=0
+BACKPAQ_TIMING_INCREMENT=-100
+
+if [ -f /etc/sysconfig/hotplug ] ; then
+    . /etc/sysconfig/hotplug
+fi
+
+case $ACTION in
+add)
+    case $DEVICE_NAME in 
+    "Compaq Mercury Backpaq")
+	mkdir -p /backpaq
+	echo $BACKPAQ_TIMING_INCREMENT > /proc/sys/backpaq/pcmcia/timing_increment_ns
+	## mount -t jffs2 /dev/mtdblock/4 /backpaq
+	modprobe h3600_backpaq_fpga || mesg 'could not load backpaq fpga driver'
+	modprobe h3600_backpaq_camera || mesg 'could not load backpaq camera driver'
+	if [ -c /dev/v4l/video0 ] ; then
+	    ln -s /dev/v4l/video0 /dev/video0
+	    ln -s /dev/v4l/video0 /dev/video
+	fi
+	CAMERATYPE=`/bin/grep "CameraType" /proc/backpaq/camera | /bin/sed -e 's/.*: //'`
+	BACKPAQ_NUMBER=`/bin/grep "Major revision" /proc/backpaq/eeprom | /bin/sed -e 's/.*0x//'`
+	FPGA_NUMBER=`/bin/grep "FPGA version" /proc/backpaq/eeprom | /bin/sed -e 's/.*0x//'`
+	CAMERA_NUMBER=`/bin/grep "Camera" /proc/backpaq/eeprom | /bin/sed -e 's/.*0x//'`
+	
+	echo "CAMERA_TYPE = $CAMERATYPE"
+	echo "BACKPAQ_NUMBER = $BACKPAQ_NUMBER"
+	echo "FPGA_NUMBER = $FPGA_NUMBER"
+	echo "CAMERA_NUMBER = $CAMERA_NUMBER"
+	echo "looking for file: /etc/fpga_B${BACKPAQ_NUMBER}_F${FPGA_NUMBER}_C${CAMERA_NUMBER}.bin"
+	if [ -e /etc/fpga_B${BACKPAQ_NUMBER}_F${FPGA_NUMBER}_C${CAMERA_NUMBER}.bin ] ; then
+		    cat /etc/fpga_B${BACKPAQ_NUMBER}_F${FPGA_NUMBER}_C${CAMERA_NUMBER}.bin > /dev/backpaq/fpga
+	elif [ -e /etc/fpga_$CAMERATYPE.bin ] ; then
+	    cat /etc/fpga_$CAMERATYPE.bin > /dev/backpaq/fpga
+	elif [ -e /etc/fpga.bin ] ; then
+	    cat /etc/fpga.bin > /dev/backpaq/fpga
+	else
+	    mesg 'unable to program the backpaq fpga'
+	fi
+	modprobe h3600_backpaq_accel || mesg 'could not load backpaq accelerometer driver'
+	mesg 'BackPAQ drivers loaded'
+	;;
+    "Compaq CompactFlash Sleeve")
+	mesg 'CompactFlash drivers loaded'
+	echo $COMPACTFLASH_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	;;
+    "Compaq PC Card Sleeve")
+	mesg 'PC card sleeve drivers loaded'
+	echo $PCMCIA_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	;;
+    "Compaq Dual PC Card Sleeve")
+	mesg 'Dual PC card sleeve drivers loaded'
+	echo $DUAL_PCMCIA_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	;;
+    "Navman GPS/CF Sleeve")
+	mesg 'Navman GPS sleeve drivers loaded'
+	echo $NAVMAN_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	start-stop-daemon --start --exec /usr/sbin/gpsd.bin -- -p /dev/tts/0 -s 57600
+	;;
+    *)
+	mesg "$1 $ACTION event not handled for $DEVICE_NAME"
+	;;
+    esac
+    ;;
+
+remove)
+    case $DEVICE_NAME in 
+    "Compaq Mercury Backpaq")
+	mesg 'Unloading BackPAQ drivers'
+	## umount /backpaq
+	rmmod h3600_backpaq_camera
+	rmmod h3600_backpaq_accel
+	rmmod h3600_backpaq_fpga
+	;;
+    "Compaq CompactFlash Sleeve")
+	mesg 'Unloading CompactFlash sleeve'
+	;;
+    "Compaq PC Card Sleeve")
+	mesg 'Unloading PC Card sleeve'
+	;;
+    "Compaq Dual PC Card Sleeve")
+	mesg 'Unloading Dual PC Card sleeve'
+	;;
+    "Navman GPS/CF Sleeve")
+	mesg 'Unloading Navman GPS sleeve'
+	start-stop-daemon --stop --name gpsd.bin
+	;;
+    *)
+	mesg $1 $ACTION event not handled for $DEVICE_NAME
+	;;
+    esac
+    ;;
+
+*)
+    mesg "$1 $ACTION event not supported"
+    exit 1 ;;
+
+esac

meta/packages/linux-hotplug/files/sleeve.rc

@@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# H3600 Sleeve hotplug *.rc agent.
+# This script is called by /etc/init.d/hotplug whenever
+# a run level has changed.
+# 
+# A single argument is passed - start, restart, status, or stop
+#
+# We set up parameters that are equivalent to the ones created
+# by the Kernel and pass them along to /sbin/hotplug (the
+# function called by the kernel).
+#
+# Kernel NET hotplug params include:
+#	
+#	ACTION=%s [add or remove]
+#	VENDOR_ID=%s
+#	DEVICE_ID=%x
+#	DEVICE_NAME=%s
+#
+
+. /etc/hotplug/hotplug.functions
+# DEBUG=yes export DEBUG
+
+SLEEVEFILE="/proc/bus/sleeve/device"
+[ ! -f $SLEEVEFILE ] && exit 0
+
+# give the sleeve driver a kick to make sure it recognizes the card -Jamey 6/26/01
+# echo > /proc/sys/sleeve/insert
+
+export DEVICE_NAME=`/bin/grep driver $SLEEVEFILE | /bin/sed -e 's/.*=//'`
+export DEVICE_ID=`/bin/grep device $SLEEVEFILE | /bin/sed -e 's/.*=//'`
+export VENDOR_ID=`/bin/grep vendor $SLEEVEFILE | /bin/sed -e 's/.*=//'`
+
+case "$1" in
+    start)
+	export ACTION="add"
+	/sbin/hotplug sleeve
+	;;
+    stop)
+	export ACTION="remove"
+	/sbin/hotplug sleeve
+	;;
+    restart)
+	export ACTION="remove"
+	/sbin/hotplug sleeve
+	export ACTION="add"
+	/sbin/hotplug sleeve
+	;;
+    status)
+	if [ -f /var/lock/subsys/hotplug ]; then
+	    mesg "Hot plug sleeve has been started, current device $DEVICE_NAME"
+	else
+	    mesg "Hot plug sleeve has not been started, current device $DEVICE_NAME"
+	fi
+	;;
+    *)
+	mesg "Usage: $0 {start|stop|status|restart}"
+	;;
+esac
+

meta/packages/linux-hotplug/files/soc.agent

@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# SoC hotplug agent for 2.6 kernels 
+#
+#	ACTION=add
+#	SOC_ID=1234
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+
+MAP_CURRENT=$MODULE_DIR/modules.socmap
+
+#
+# stdin is "modules.socmap" syntax
+# on return, all matching modules were added to $DRIVERS
+#
+soc_map_modules ()
+{
+    while read line
+    do
+        # comments are lines that start with "#" ...
+	# be careful, they still get parsed by bash!
+	case "$line" in
+	\#*) continue ;;
+	esac
+
+	set $line
+
+	module="$1"
+	id="$2"
+
+	if [ "$id" != "0x$SOC_ID" ]; then
+		continue
+	fi
+
+	# It was a match!
+	case " $DRIVERS " in
+	    *" $module "* )
+		: already found
+	    ;;
+	    * )
+		DRIVERS="$module $DRIVERS"
+	    ;;
+	esac
+	: drivers $DRIVERS
+    done
+}
+
+case $ACTION in
+
+add)
+
+    load_drivers soc $MAP_CURRENT "$SOC_ID"
+    ;;
+
+*)
+    debug_mesg SoC $ACTION event not supported
+    exit 1
+    ;;
+
+esac

meta/packages/linux-hotplug/files/sysconfig-hotplug

@@ -0,0 +1,12 @@
+##
+## Each of these may be assigned to the number of nanoseconds by which to
+## increase the timing of pcmcia bus transactions 
+##
+# COMPACTFLASH_TIMING_INCREMENT=0
+## the single pcmcia sleeve seems to be a bit slow, but 25ns makes my
+## orinoco card detectable. -Jamey 4/2/2002 
+PCMCIA_TIMING_INCREMENT=25
+# DUAL_PCMCIA_TIMING_INCREMENT=0
+
+## mount options used by MMC
+MMC_MOUNT_OPTIONS="-t auto -o sync,noatime"

meta/packages/linux-hotplug/files/tosa/sysconfig-usb

@@ -0,0 +1,2 @@
+## Specify the USB host controller driver
+HCD="usb_ohci_tc6393"

meta/packages/linux-hotplug/files/usbd

@@ -0,0 +1,2 @@
+usbdmodule=""
+

meta/packages/linux-hotplug/files/usbd.agent

@@ -0,0 +1,63 @@
+#!/bin/ash
+
+# DEBUG=yes export DEBUG
+#set -x
+
+. /etc/hotplug/hotplug.functions
+. /etc/default/usbd
+cd $HOTPLUG_DIR
+
+[ -z "$INTERFACE" ] && exit 1
+[ -z "$ACTION" ] && exit 1
+[ -z "$usbdmodule" ] && exit 0
+
+debug_mesg "USBD $ACTION Action Recived"
+
+case $INTERFACE in
+
+monitor)
+	case $ACTION in
+		# called to load all usb device modules
+	load)	
+		modprobe usbdcore
+		modprobe net_fd
+		modprobe $usbdmodule
+		;;
+	
+		# called to handle suspend power management event
+	suspend) 
+		rmmod $usbdmodule
+		;;
+
+		# called to reload after resume power management event
+	restore-loaded)
+		modprobe $usbdmodule
+		sleep 2
+		;;
+
+		# called to unload after resume power management event
+	restore-unloaded)
+		modprobe -r net_fd
+		;;
+
+		# called to unload all usb device modules
+	unload)
+		modprobe -r $usbdmodule
+		;;
+
+	*)
+		debug_mesg USBD $ACTION event not handled
+		exit 1
+		;;
+	esac
+	;;
+*)
+	debug_mesg USBD $INTERFACE-$ACTION event not handled
+	exit 1
+	;;
+esac
+
+[ -e /proc/usb-monitor ] && echo "Done" > /proc/usb-monitor
+
+exit 0
+

meta/packages/linux-hotplug/linux-hotplug-20040920/fix-net.agent

@@ -0,0 +1,29 @@
+#!/bin/sh -e
+#
+# Since ifupdown of Debian is different than one of RedHat.
+# So we need to fix it
+
+topdir=$1
+dir=$topdir/etc/hotplug
+test -f $dir/net.agent || exit 1
+mv $dir/net.agent $dir/net.agent.orig
+
+sed -e '/^\*)/i\
+unregister)\
+    # Assume that we want to run ifdown no matter what,  \
+    # because it is not going to remove the data from the \
+    # ifstate database otherwise.\
+    if [ -x /sbin/ifdown ]; then\
+       debug_mesg invoke ifdown $INTERFACE\
+        exec /sbin/ifdown $INTERFACE\
+    else\
+       # mesg "how do I bring interfaces up on this distro?"\
+       mesg "E: /sbin/ifdown not found. You need to install ifupdown package"\
+    fi\
+    mesg $1 $ACTION event not handled\
+    ;;\
+' $dir/net.agent.orig > $dir/net.agent
+rm -f $dir/net.agent.orig
+chmod 755 $dir/net.agent
+exit 0
+

meta/packages/linux-hotplug/linux-hotplug-20040920/hotplug-net-agent-usb.patch

@@ -0,0 +1,43 @@
+--- hotplug/etc/hotplug/net.agent	2005-01-13 21:12:47.143597392 +1300
++++ hotplug/etc/hotplug/net.agent	2005-01-13 21:17:57.095477544 +1300
+@@ -41,6 +41,9 @@
+ 	    debug_mesg assuming $INTERFACE is already up
+ 	    exit 0
+ 	    ;;
++	# interfaces that don't go up until attached
++	usbf)
++	    ;;
+ 	# interfaces that are registered then brought up
+ 	*)
+ 	    # NOTE:  network configuration relies on administered state,
+@@ -83,6 +86,13 @@
+     mesg $1 $ACTION event not handled
+     ;;
+ 
++attach)
++    # ifupdown is dumb and won't bring up an interface that it thinks
++    # might already be configured.
++    /sbin/ifdown $INTERFACE
++    exec /sbin/ifup $INTERFACE
++    ;;
++
+ remove|unregister)
+     case $INTERFACE in
+ 	# interfaces that are unregistered after being "down" (?)
+@@ -105,6 +115,16 @@
+     mesg $1 $ACTION event not handled
+     ;;
+ 
++detach)
++    if [ -x /sbin/ifdown ]; then
++        debug_mesg invoke ifdown $INTERFACE
++        exec /sbin/ifdown $INTERFACE
++    else
++        mesg "E: /sbin/ifdown not found. You need to install ifupdown package"
++    fi
++    mesg $1 $ACTION event not handled
++    ;;
++
+ *)
+     debug_mesg NET $ACTION event for $INTERFACE not supported
+     exit 1 ;;

meta/packages/linux-hotplug/linux-hotplug-20040920/isapnp-exit.diff

@@ -0,0 +1,11 @@
+--- hotplug-2004_09_20/etc/hotplug/isapnp.rc.orig	2004-12-20 15:01:21.541446000 +0100
++++ hotplug-2004_09_20/etc/hotplug/isapnp.rc	2004-12-20 15:01:32.625760928 +0100
+@@ -13,7 +13,7 @@
+ #
+ 
+ # only 2.6 kernels are supported
+-[ -d /sys/bus/pnp/devices/ ] || return 0
++[ -d /sys/bus/pnp/devices/ ] || exit 0
+ 
+ cd /etc/hotplug
+ . ./hotplug.functions

meta/packages/linux-hotplug/linux-hotplug-20040920/logcheck-ignore

@@ -0,0 +1 @@
+net.agent: invoke if(up|down)

meta/packages/linux-hotplug/linux-hotplug-20040920/update-usb.usermap

@@ -0,0 +1,37 @@
+#!/bin/sh -e
+# update-usb.usermap
+# Copyright (c) 2001 Fumitoshi UKAI <ukai@debian.or.jp>
+# GPL
+
+LIBDIR=/usr/lib/hotplug
+USERMAP=/etc/hotplug/usb.usermap
+LOCALMAP=/etc/hotplug/usb.usermap.local
+
+test -d $LIBDIR || exit 0
+
+echo -n "Updating $USERMAP ..."
+
+echo "# usb.usermap file" > $USERMAP
+echo "# This is autogenerated by update-usb.usermap program" >> $USERMAP
+echo "# usb module         match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info" >> $USERMAP
+
+if [ -f $LOCALMAP ]; then
+   echo "# usb.usermap.local" >> $USERMAP
+   cat $LOCALMAP >> $USERMAP
+fi
+
+cd $LIBDIR
+for package in *
+do
+  if [ -d "$package" ]; then
+      map=$package/usb.usermap
+      echo "# $package" >> $USERMAP
+      if [ -x "$map" ]; then
+	  ./$map >> $USERMAP
+      elif [ -f "$map" ]; then
+	  cat $map >> $USERMAP
+      fi
+  fi
+done
+
+echo done.

meta/packages/linux-hotplug/linux-hotplug-20040920/usb-storage

@@ -0,0 +1,2 @@
+#!/bin/sh
+modprobe sd_mod

meta/packages/linux-hotplug/linux-hotplug-20040920/usbrc-busybox.patch

@@ -0,0 +1,13 @@
+--- hotplug/etc/hotplug/usb.rc.old	2005-05-25 15:50:11.000000000 +0100
++++ hotplug/etc/hotplug/usb.rc	2005-05-25 15:50:59.000000000 +0100
+@@ -95,8 +95,8 @@
+ 			PRODUCT="$(cat $devlink/../idVendor)/$(cat $devlink/../idProduct)/$(cat $devlink/../bcdDevice)"
+ 		        if [ -f $devlink/../../devnum ]
+ 			then
+-			    devbus=$( ( echo -n 000 ; cat $devlink/../../devnum ) | grep -o ...\$ )
+-			    devdev=$( ( echo -n 000 ; cat $devlink/../devnum ) | grep -o ...\$ )
++			    devbus=$( ( echo -n 000 ; cat $devlink/../../devnum ) | sed 's/.*\(...\)$/\1/' )
++			    devdev=$( ( echo -n 000 ; cat $devlink/../devnum ) | sed 's/.*\(...\)$/\1/' )
+ 			    DEVICE="/proc/bus/usb/$devbus/$devdev"
+ 			else
+ 			    DEVICE=

meta/packages/linux-hotplug/linux-hotplug-20040920/userspecified_hcd.patch

@@ -0,0 +1,55 @@
+
+#
+# Patch managed by http://www.holgerschurig.de/patcher.html
+#
+
+--- hotplug-2004_09_20/etc/hotplug/usb.rc~userspecified_hcd.patch
++++ hotplug-2004_09_20/etc/hotplug/usb.rc
+@@ -24,6 +24,7 @@
+ unset I_WANT_A_BROKEN_PS
+ PS_PERSONALITY=linux
+ 
++HCD=
+ STATIC_MODULE_LIST=
+ X11_USBMICE_HACK=false
+ 
+@@ -166,20 +167,25 @@
+     # FIXME: some of this should be driven by PCI hotplugging, and have
+     # the blacklist control which uhci driver gets used (before 2.5).
+ 
+-    # "new style" HCDs ... more common code
+-    modprobe -q ehci-hcd >/dev/null 2>&1
+-    modprobe -q ohci-hcd >/dev/null 2>&1
+-    modprobe -q uhci-hcd >/dev/null 2>&1
+-
+-    # "old style" HCDs ... more driver-specific bugs
+-    modprobe -q usb-ohci >/dev/null 2>&1
+-    # NOTE: this prefers "uhci"; you may prefer "usb-uhci".
+-    # modprobe -q usb-uhci >/dev/null 2>&1 || modprobe -q uhci >/dev/null 2>&1
+-    modprobe -q uhci >/dev/null 2>&1 || modprobe -q usb-uhci >/dev/null 2>&1
+-
+-    # ... add any non-PCI HCDS here.  Examples include the
+-    # CRIS usb-host, Philips ISP-1161, Symlogic 811HS, and so on.
+-    # ohci-hcd can handle some non-pci variants.
++    # If the user specified which HCD they want, trust them.
++    if [ -n "$HCD" ]; then
++        modprobe -q $HCD >/dev/null 2>&1
++    else
++        # "new style" HCDs ... more common code
++        modprobe -q ehci-hcd >/dev/null 2>&1
++        modprobe -q ohci-hcd >/dev/null 2>&1
++        modprobe -q uhci-hcd >/dev/null 2>&1
++    
++        # "old style" HCDs ... more driver-specific bugs
++        modprobe -q usb-ohci >/dev/null 2>&1
++        # NOTE: this prefers "uhci"; you may prefer "usb-uhci".
++        # modprobe -q usb-uhci >/dev/null 2>&1 || modprobe -q uhci >/dev/null 2>&1
++        modprobe -q uhci >/dev/null 2>&1 || modprobe -q usb-uhci >/dev/null 2>&1
++    
++        # ... add any non-PCI HCDS here.  Examples include the
++        # CRIS usb-host, Philips ISP-1161, Symlogic 811HS, and so on.
++        # ohci-hcd can handle some non-pci variants.
++    fi
+ 
+     if [ -d /proc/bus/usb ]; then
+ 	# If we see there are no busses, we "failed" and

meta/packages/linux-hotplug/linux-hotplug_20040920.bb

@@ -0,0 +1,73 @@
+DESCRIPTION = "This package contains the scripts necessary \
+for hotplug Linux support, and lets you plug in new devices \
+and use them immediately."
+HOMEPAGE = "http://linux-hotplug.sourceforge.net/"
+LICENSE = "GPL"
+RPROVIDES_${PN} = "hotplug"
+RCONFLICTS_${PN} = "hotplug"
+RREPLACES_${PN} = "hotplug"
+SECTION = "base"
+RSUGGESTS = "pciutils usbutils"
+PR = "r8"
+
+SRC_URI = "ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/hotplug-2004_09_20.tar.gz \
+	file://userspecified_hcd.patch;patch=1 \
+	file://hotplug-net-agent-usb.patch;patch=1 \
+	file://usbrc-busybox.patch;patch=1 \
+	file://fix-net.agent \
+	file://update-usb.usermap \
+	file://logcheck-ignore \
+	file://sleeve.agent \
+	file://sleeve.rc \
+	file://mmc.agent \
+	file://usbd.agent \
+	file://usbd \
+	file://sysconfig-hotplug \
+	file://sysconfig-usb \
+	file://isapnp-exit.diff;patch=1 \
+	file://usb-storage \
+	file://soc.agent"
+
+SRC_URI_append_openzaurus = " file://quiet-pci.patch;patch=1"
+
+S = "${WORKDIR}/hotplug-2004_09_20"
+
+INITSCRIPT_NAME = "hotplug"
+INITSCRIPT_PARAMS = "start 40 S . stop 89 0 6 ."
+
+inherit update-rc.d
+
+do_compile () {
+	:
+}
+
+oldmandir := "${mandir}"
+oldsbindir := "${sbindir}"
+prefix = ""
+exec_prefix = ""
+FILES_${PN} += "${oldsbindir}"
+FILES_${PN}-doc += "${oldmandir}"
+
+export DEBFIX = "sed -e 's:sysconfig/usb:default/hotplug.usb:'"
+do_install () {
+	install -d ${D}${sysconfdir}/logcheck/ignore.d
+	install -d ${D}${oldmandir}
+	install -d ${D}${oldsbindir}
+	#install -d ${D}${sysconfdir}/default
+	oe_runmake prefix=${D}${prefix} exec_prefix=${D}${exec_prefix} \
+		   etcdir=${D}${sysconfdir} sbindir=${D}${sbindir} \
+		   mandir=${D}${oldmandir} INSTALL=install install
+	sh ${WORKDIR}/fix-net.agent ${D} || :
+	install -m 0755 ${WORKDIR}/update-usb.usermap ${D}${oldsbindir}/
+	install -m 0644 ${WORKDIR}/logcheck-ignore ${D}${sysconfdir}/logcheck/ignore.d/hotplug
+	install -m 0755 ${WORKDIR}/sleeve.agent ${D}${sysconfdir}/hotplug/
+	install -m 0755 ${WORKDIR}/sleeve.rc ${D}${sysconfdir}/hotplug/
+	install -m 0755 ${WORKDIR}/mmc.agent ${D}${sysconfdir}/hotplug/
+	install -m 0755 ${WORKDIR}/usbd.agent ${D}${sysconfdir}/hotplug/
+	install -m 0755 ${WORKDIR}/soc.agent ${D}${sysconfdir}/hotplug/
+	#install -m 0755 ${WORKDIR}/usbd ${D}${sysconfdir}/default/usbd
+	install -d ${D}${sysconfdir}/sysconfig
+	install -m 0644 ${WORKDIR}/sysconfig-hotplug ${D}${sysconfdir}/sysconfig/hotplug
+	install -m 0644 ${WORKDIR}/sysconfig-usb ${D}${sysconfdir}/sysconfig/usb
+	install -m 0755 ${WORKDIR}/usb-storage ${D}${sysconfdir}/hotplug/usb
+}