Rename /openembedded/ -> /meta/

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@530 311d38ba-8fff-0310-9ca6-ca027cbcb966

meta/packages/linux-hotplug/files/collie/usbd

@@ -0,0 +1 @@
+usbdmodule="sa1100_bi"

meta/packages/linux-hotplug/files/mmc.agent

@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# H3600 Sleeve hotplug policy agent for Linux 2.4 kernels
+#
+# Kernel NET hotplug params include:
+#	
+#	ACTION=%s [add or remove]
+#	MEDIA=%s
+#	SLOT=%d
+#
+
+. /etc/hotplug/hotplug.functions
+#DEBUG=yes export DEBUG
+
+    echo "Executing $0 action=$ACTION, media=$MEDIA ($SLOT)" > /dev/console
+
+MMC_MOUNT_OPTIONS="-t auto -o sync,noatime"
+
+if [ -f /etc/sysconfig/hotplug ] ; then
+    . /etc/sysconfig/hotplug
+fi
+
+case `uname -r` in
+2.4*)
+    devpath=mmc/part
+    ;;
+*)
+    devpath=mmcblk0p
+    ;;
+esac
+
+if [ "$ACTION" = "add" ] ; then
+    sleep 4
+    echo -n add > /dev/console
+    for n in 1 2 3 4 ; do
+	device=/dev/$devpath$n
+	if [ "$n" = "1" ] ; then
+	    card=/mnt/card
+	else
+	    card=/mnt/card$n
+	fi
+	[ -b $device ] || break
+	echo " flash on $device" > /dev/console
+	[ -d $card ] || mkdir -p $card
+	mount $MMC_MOUNT_OPTIONS $device $card
+    done
+
+else
+    for card in /mnt/card*; do
+	umount $card
+    done
+fi

meta/packages/linux-hotplug/files/sleeve.agent

@@ -0,0 +1,120 @@
+#!/bin/sh
+#
+# H3600 Sleeve hotplug policy agent for Linux 2.4 kernels
+#
+# Kernel NET hotplug params include:
+#	
+#	ACTION=%s [add or remove]
+#	VENDOR_ID=%s
+#	DEVICE_ID=%x
+#	DEVICE_NAME=%s
+#
+
+. /etc/hotplug/hotplug.functions
+#DEBUG=yes export DEBUG
+
+if [ "$DEBUG" != "" ]; then
+    mesg "Executing $0 action=$ACTION, device=$DEVICE_NAME ($VENDOR_ID,$DEVICE_ID)"
+fi
+
+COMPACTFLASH_TIMING_INCREMENT=0
+PCMCIA_TIMING_INCREMENT=0
+DUAL_PCMCIA_TIMING_INCREMENT=0
+NAVMAN_TIMING_INCREMENT=0
+BACKPAQ_TIMING_INCREMENT=-100
+
+if [ -f /etc/sysconfig/hotplug ] ; then
+    . /etc/sysconfig/hotplug
+fi
+
+case $ACTION in
+add)
+    case $DEVICE_NAME in 
+    "Compaq Mercury Backpaq")
+	mkdir -p /backpaq
+	echo $BACKPAQ_TIMING_INCREMENT > /proc/sys/backpaq/pcmcia/timing_increment_ns
+	## mount -t jffs2 /dev/mtdblock/4 /backpaq
+	modprobe h3600_backpaq_fpga || mesg 'could not load backpaq fpga driver'
+	modprobe h3600_backpaq_camera || mesg 'could not load backpaq camera driver'
+	if [ -c /dev/v4l/video0 ] ; then
+	    ln -s /dev/v4l/video0 /dev/video0
+	    ln -s /dev/v4l/video0 /dev/video
+	fi
+	CAMERATYPE=`/bin/grep "CameraType" /proc/backpaq/camera | /bin/sed -e 's/.*: //'`
+	BACKPAQ_NUMBER=`/bin/grep "Major revision" /proc/backpaq/eeprom | /bin/sed -e 's/.*0x//'`
+	FPGA_NUMBER=`/bin/grep "FPGA version" /proc/backpaq/eeprom | /bin/sed -e 's/.*0x//'`
+	CAMERA_NUMBER=`/bin/grep "Camera" /proc/backpaq/eeprom | /bin/sed -e 's/.*0x//'`
+	
+	echo "CAMERA_TYPE = $CAMERATYPE"
+	echo "BACKPAQ_NUMBER = $BACKPAQ_NUMBER"
+	echo "FPGA_NUMBER = $FPGA_NUMBER"
+	echo "CAMERA_NUMBER = $CAMERA_NUMBER"
+	echo "looking for file: /etc/fpga_B${BACKPAQ_NUMBER}_F${FPGA_NUMBER}_C${CAMERA_NUMBER}.bin"
+	if [ -e /etc/fpga_B${BACKPAQ_NUMBER}_F${FPGA_NUMBER}_C${CAMERA_NUMBER}.bin ] ; then
+		    cat /etc/fpga_B${BACKPAQ_NUMBER}_F${FPGA_NUMBER}_C${CAMERA_NUMBER}.bin > /dev/backpaq/fpga
+	elif [ -e /etc/fpga_$CAMERATYPE.bin ] ; then
+	    cat /etc/fpga_$CAMERATYPE.bin > /dev/backpaq/fpga
+	elif [ -e /etc/fpga.bin ] ; then
+	    cat /etc/fpga.bin > /dev/backpaq/fpga
+	else
+	    mesg 'unable to program the backpaq fpga'
+	fi
+	modprobe h3600_backpaq_accel || mesg 'could not load backpaq accelerometer driver'
+	mesg 'BackPAQ drivers loaded'
+	;;
+    "Compaq CompactFlash Sleeve")
+	mesg 'CompactFlash drivers loaded'
+	echo $COMPACTFLASH_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	;;
+    "Compaq PC Card Sleeve")
+	mesg 'PC card sleeve drivers loaded'
+	echo $PCMCIA_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	;;
+    "Compaq Dual PC Card Sleeve")
+	mesg 'Dual PC card sleeve drivers loaded'
+	echo $DUAL_PCMCIA_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	;;
+    "Navman GPS/CF Sleeve")
+	mesg 'Navman GPS sleeve drivers loaded'
+	echo $NAVMAN_TIMING_INCREMENT > /proc/sys/bus/pcmcia/timing_increment_ns
+	start-stop-daemon --start --exec /usr/sbin/gpsd.bin -- -p /dev/tts/0 -s 57600
+	;;
+    *)
+	mesg "$1 $ACTION event not handled for $DEVICE_NAME"
+	;;
+    esac
+    ;;
+
+remove)
+    case $DEVICE_NAME in 
+    "Compaq Mercury Backpaq")
+	mesg 'Unloading BackPAQ drivers'
+	## umount /backpaq
+	rmmod h3600_backpaq_camera
+	rmmod h3600_backpaq_accel
+	rmmod h3600_backpaq_fpga
+	;;
+    "Compaq CompactFlash Sleeve")
+	mesg 'Unloading CompactFlash sleeve'
+	;;
+    "Compaq PC Card Sleeve")
+	mesg 'Unloading PC Card sleeve'
+	;;
+    "Compaq Dual PC Card Sleeve")
+	mesg 'Unloading Dual PC Card sleeve'
+	;;
+    "Navman GPS/CF Sleeve")
+	mesg 'Unloading Navman GPS sleeve'
+	start-stop-daemon --stop --name gpsd.bin
+	;;
+    *)
+	mesg $1 $ACTION event not handled for $DEVICE_NAME
+	;;
+    esac
+    ;;
+
+*)
+    mesg "$1 $ACTION event not supported"
+    exit 1 ;;
+
+esac

meta/packages/linux-hotplug/files/sleeve.rc

@@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# H3600 Sleeve hotplug *.rc agent.
+# This script is called by /etc/init.d/hotplug whenever
+# a run level has changed.
+# 
+# A single argument is passed - start, restart, status, or stop
+#
+# We set up parameters that are equivalent to the ones created
+# by the Kernel and pass them along to /sbin/hotplug (the
+# function called by the kernel).
+#
+# Kernel NET hotplug params include:
+#	
+#	ACTION=%s [add or remove]
+#	VENDOR_ID=%s
+#	DEVICE_ID=%x
+#	DEVICE_NAME=%s
+#
+
+. /etc/hotplug/hotplug.functions
+# DEBUG=yes export DEBUG
+
+SLEEVEFILE="/proc/bus/sleeve/device"
+[ ! -f $SLEEVEFILE ] && exit 0
+
+# give the sleeve driver a kick to make sure it recognizes the card -Jamey 6/26/01
+# echo > /proc/sys/sleeve/insert
+
+export DEVICE_NAME=`/bin/grep driver $SLEEVEFILE | /bin/sed -e 's/.*=//'`
+export DEVICE_ID=`/bin/grep device $SLEEVEFILE | /bin/sed -e 's/.*=//'`
+export VENDOR_ID=`/bin/grep vendor $SLEEVEFILE | /bin/sed -e 's/.*=//'`
+
+case "$1" in
+    start)
+	export ACTION="add"
+	/sbin/hotplug sleeve
+	;;
+    stop)
+	export ACTION="remove"
+	/sbin/hotplug sleeve
+	;;
+    restart)
+	export ACTION="remove"
+	/sbin/hotplug sleeve
+	export ACTION="add"
+	/sbin/hotplug sleeve
+	;;
+    status)
+	if [ -f /var/lock/subsys/hotplug ]; then
+	    mesg "Hot plug sleeve has been started, current device $DEVICE_NAME"
+	else
+	    mesg "Hot plug sleeve has not been started, current device $DEVICE_NAME"
+	fi
+	;;
+    *)
+	mesg "Usage: $0 {start|stop|status|restart}"
+	;;
+esac
+

meta/packages/linux-hotplug/files/soc.agent

@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# SoC hotplug agent for 2.6 kernels 
+#
+#	ACTION=add
+#	SOC_ID=1234
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+
+MAP_CURRENT=$MODULE_DIR/modules.socmap
+
+#
+# stdin is "modules.socmap" syntax
+# on return, all matching modules were added to $DRIVERS
+#
+soc_map_modules ()
+{
+    while read line
+    do
+        # comments are lines that start with "#" ...
+	# be careful, they still get parsed by bash!
+	case "$line" in
+	\#*) continue ;;
+	esac
+
+	set $line
+
+	module="$1"
+	id="$2"
+
+	if [ "$id" != "0x$SOC_ID" ]; then
+		continue
+	fi
+
+	# It was a match!
+	case " $DRIVERS " in
+	    *" $module "* )
+		: already found
+	    ;;
+	    * )
+		DRIVERS="$module $DRIVERS"
+	    ;;
+	esac
+	: drivers $DRIVERS
+    done
+}
+
+case $ACTION in
+
+add)
+
+    load_drivers soc $MAP_CURRENT "$SOC_ID"
+    ;;
+
+*)
+    debug_mesg SoC $ACTION event not supported
+    exit 1
+    ;;
+
+esac

meta/packages/linux-hotplug/files/sysconfig-hotplug

@@ -0,0 +1,12 @@
+##
+## Each of these may be assigned to the number of nanoseconds by which to
+## increase the timing of pcmcia bus transactions 
+##
+# COMPACTFLASH_TIMING_INCREMENT=0
+## the single pcmcia sleeve seems to be a bit slow, but 25ns makes my
+## orinoco card detectable. -Jamey 4/2/2002 
+PCMCIA_TIMING_INCREMENT=25
+# DUAL_PCMCIA_TIMING_INCREMENT=0
+
+## mount options used by MMC
+MMC_MOUNT_OPTIONS="-t auto -o sync,noatime"

meta/packages/linux-hotplug/files/tosa/sysconfig-usb

@@ -0,0 +1,2 @@
+## Specify the USB host controller driver
+HCD="usb_ohci_tc6393"

meta/packages/linux-hotplug/files/usbd

@@ -0,0 +1,2 @@
+usbdmodule=""
+

meta/packages/linux-hotplug/files/usbd.agent

@@ -0,0 +1,63 @@
+#!/bin/ash
+
+# DEBUG=yes export DEBUG
+#set -x
+
+. /etc/hotplug/hotplug.functions
+. /etc/default/usbd
+cd $HOTPLUG_DIR
+
+[ -z "$INTERFACE" ] && exit 1
+[ -z "$ACTION" ] && exit 1
+[ -z "$usbdmodule" ] && exit 0
+
+debug_mesg "USBD $ACTION Action Recived"
+
+case $INTERFACE in
+
+monitor)
+	case $ACTION in
+		# called to load all usb device modules
+	load)	
+		modprobe usbdcore
+		modprobe net_fd
+		modprobe $usbdmodule
+		;;
+	
+		# called to handle suspend power management event
+	suspend) 
+		rmmod $usbdmodule
+		;;
+
+		# called to reload after resume power management event
+	restore-loaded)
+		modprobe $usbdmodule
+		sleep 2
+		;;
+
+		# called to unload after resume power management event
+	restore-unloaded)
+		modprobe -r net_fd
+		;;
+
+		# called to unload all usb device modules
+	unload)
+		modprobe -r $usbdmodule
+		;;
+
+	*)
+		debug_mesg USBD $ACTION event not handled
+		exit 1
+		;;
+	esac
+	;;
+*)
+	debug_mesg USBD $INTERFACE-$ACTION event not handled
+	exit 1
+	;;
+esac
+
+[ -e /proc/usb-monitor ] && echo "Done" > /proc/usb-monitor
+
+exit 0
+