When running the make.bash script to build the host-side
tools, make sure that cgo is using CFLAGS and LDFLAGS for
the build host, rather than those for the target.
[YOCTO #12704]
(From OE-Core rev: b1783e423444e0432d2653fbd00c18d119d82647)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* the pseudo.log is significantly shorter with this revision
fddbe85 Fix symlink following errors
3a48dc4 Fix one more stray slash
691a230 Less chatty debugging
0c053e5 Change copyright default.
(From OE-Core rev: 935542f96c0706a6c5f9b0a77fce175733995f49)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a problem when for example, a glibc 2.27 based system builds some
library like libpopt-native and puts it into sstate then it is reused
on a pre glibc-2.27 system to build something which depends on popt like
rpm-native. This results in an error like:
recipe-sysroot-native/usr/lib/libpopt.so: undefined reference to `glob@GLIBC_2.27'
In the past we've had this problem with new symbols like getrandom and
getentropy, here its with a more complex symbol where there is an old
version and a newer version.
We've looked into various options, basically we cannot link against our
uninative libc/ld.so since we don't have the right headers or compiler
link libraries. The compiler doesn't allow you to switch in a new set
either, even if we did want to ship them. Shipping a complete compiler,
dev headers and libs also isn't an option.
On the other hand if we follow the ld man page, it does say:
"""
The reasons for allowing undefined symbol references in shared libraries
specified at link time are that:
- A shared library specified at link time may not be the same as the one
that is available at load time, so the symbol might actually be
resolvable at load time.
"""
which is exactly this case. By the time the binary runs, it will use
our uninative loader and libc and the symbol will be available.
Therefore we basically have a choice, we get weird intermittent bugs,
we drop uninative entirely, or we pass this option.
If we pass the option, we can drop the other workarounds too.
(From OE-Core rev: 75a62ede393bf6b4972390ef5290d50add19341a)
(From OE-Core rev: d18bf7fa8e80d6cfaf3fdbe1ab06eec84b954432)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit 5159ddcb62 string length test
performed against pi_dir has effectively never been able to succeed.
Change this to rather test if pi_dir is not an existing directory. By
doing we remove the chance of seeing the following console error message
during first boot to a pristine rootfs:
'ls: /etc/ipk-postinsts: No such file or directory'
(From OE-Core rev: b1600ec8991dfbd3b73d209b9c620a171c5b13c4)
Signed-off-by: Niko Mauno <niko.mauno@iki.fi>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch chardev-connect-socket-to-a-spawned-command.patch calls
"socketpair". This function is missing in mingw, so the patch
needs to be modified accordingly (by conditional compilation using
_WIN32 macro where appropriate), otherwise we end up with a broken
mingw build.
While it is possible to simply remove the whole patch for mingw build
(via a .bbappend file in meta-mingw), it makes more sense to modify
the patch itself.
(From OE-Core rev: 2d955bb53a8ee36c0a648c23293139612f33f97b)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If valgrind-ptest is installed, we will get the some prelink error
like below at do_image:
.../usr/sbin/prelink: /usr/lib64/valgrind/ptest/memcheck/tests/wrap7:\
Could not find one of the dependencies: \
.../usr/sbin//prelink-rtld: error \
while loading shared libraries: wrap7so.so: cannot open shared \
object file: No such file or directory
The wrap7 needs to link the shared object in the path
/usr/lib64/valgrind/ptest/memcheck/tests, but it fails.
So we correct the path for ptest.
(From OE-Core rev: 1ec0c977c55ae2c38252e1807dc15c56007d30dc)
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can often be useful to include additional debugging tools the
toolchain such as strace. Add an option to include an arbitrary path.
(From OE-Core rev: 1fc1e3d59afd292ff8f7c4e1f64324134b73b8f4)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Shared libraries sometimes (frequently?) don't have a program
interpreter specified. The previous code would fail to find the library
dependencies in these cases because no interpreter could be found.
Commonly, this meant that if a library depends on another library, it
might not be included toolchain because dependency scanning stops with
the first one.
Instead, capture the program interpreter from the program or library
that starts the dependency chain and use that interpreter to get all of
the dependencies in the chain, recursively.
Additionally, if no interpreter can be found, fallback to using ldd
(From OE-Core rev: 4f55e61e9e3dd921bd71a127580dc5fc71d7b339)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some newer libraries and programs use RUNPATH to specify the library
search path. These executables were being skipped by the rpath fixup
code because it was grepping the ELF header for RPATH only. A more
correct solution is to ask patchelf to report the rpath, as that tool
will properly report either RPATH or RUNPATH as appropriate.
(From OE-Core rev: d1e88ad01df9b6419e02f632b1ba288d4cc3b2bf)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modifies the icecc-create-env script so that it can log output to a log
file. In addition, a --debug flag is added that allows verbose logging.
Finally, the silent flag was removed since it was never used in
icecc.bbclass
(From OE-Core rev: 3d0bd786fd79967cf8754d022044df311dd8ad3e)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/mmeeks/bootchart.git is redirecting to /xrmx/bootchart.git so update SRC_URI to
match.
(From OE-Core rev: c4208f0ef0753a4615cf9dbcfb305f638b262f50)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The python3 installation in the SDK did not include the minimum set
of modules to be functional, particularly in the case where Python
is brought in through dependencies. Rather than requiring the user
to explicitly add the modules, it's better to pull in the modules
through RRECOMMENDS. Note that the Python 2 recipe already does
this.
(From OE-Core rev: 5a88e59e488248b7ec53b072f934052b96c78a51)
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add option for dbus in configure.ac, and explicitly build without dbus
for rpm-native.
Previously, the rpm recipe tries to prevent rpm-native from attempting
to inhibit shutdown via session dbus by appending '--disable-plugins'
to EXTRA_OECONF in case of native.
However, some layer may need some functionality via plugin support. And
when it enables it, we would meet the following warning at rootfs time.
Unable to get systemd shutdown inhibition lock: Socket name too long
As plugins/systemd_inhibit.c is the only place that's related to this
dependency, we can be sure that dbus is really not needed for rpm-native.
(From OE-Core rev: 815ccef2d5bef1e46c51916e694d0974aee394a9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fedora28[1] has decided to go ahead and use libxcrypt to replace libcrypt from glibc
despite the change not having merged into glibc upstream yet. This breaks the use of
uninative in OE on fedora28 since binaries there are now using new symbols only found
in libxcrypt. libxcrypt is meant to be backwards compatible with libcrypt but not the
reverse.
Since this will impact OE in the next release cycle, this changes nativesdk only
to use this new model and adds libxcrypt to work in that case. This allows us to
build a uninative which is compatible with fedora28 and previous other OSes.
In order to work, recipes will now need to depend on virtual/crypt where they use
libcrypt since its now a separate library and we can't depend on it from glibc to
preseve backwards compatibility since glibc needs to build first. For now, only the
problematic nativesdk recipes have been fixed up. For target use, the default
provider remains glibc for now. Assuming this change is merged into upstream glibc,
we will need to roll this change out for the target but we will do this in the next
release cycle when we can better deal with the resulting bugs.
[1] https://fedoraproject.org/wiki/Changes/Replace_glibc_libcrypt_with_libxcrypt
Original patch from Charles-Antoine Couret <charles-antoine.couret@essensium.com>,
tweaked by RP to add virtual provides, SkipRecipe for libxcrypt and other minor
tweaks.
(From OE-Core rev: c1573cb7faeb296fe7077a60d02443d5ed5bded0)
Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alejandro asked this be reverted as the patch causes more problems
than it solves.
This reverts commit 5d288d286e.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Perl's patch submitted to upstream to be compiled along with glibc with libcrypt split.
(From OE-Core rev: 79703d83790a2973fefdb0e12e125b5f17e98cdf)
Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
aarch64 has been supported since GCC 5.1, sparc has been supported
since 4.9, and S390 since 7.1.
Also mark as broken entirely with musl.
(From OE-Core rev: 7d90d2a70f0184ad715e9917d3e7aa096cf98f79)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since gnomebase class already inherits autotools and pkgconfig,
there is no need to repeat it here.
(From OE-Core rev: 2eb7ba6cb68e171c880bcb1fc614f1ae6b300e4f)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its use required a script from an external repo which hasn't been updated
in 4 years, the recipe itself is out of date (doesn't install all
intercepts), and there is no oe-selftest or documentation for this.
If anyone still wants this, please do it in a separate layer.
(From OE-Core rev: 1fbae102fde54c9e7a0d74a4cda9900cd17640d6)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of patches in SRC_URI was restructured in 49aae1d7, and left
a comment about patches from Debian hanging without context. Move and
reword it to make it remain useful.
There was also a leftover comment that referred to two .h files and
do_configure_prepend() that were removed in f960c026.
(From OE-Core rev: 80a702db442674e16a450a120972eeee4cbcb29a)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a couple of prints to get a nicer log, and creates a
small summary or report after checking every module, it
makes it more feasible for adoption, easier to debug why
a module ended at a certain package and see how the
manifest was created.
(From OE-Core rev: 4c2af72f51a7bf187615fc0b3a229d25c3e191e9)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can be installed to some non standard path in which
case build will be broken.
As python2.7 is specified in HOSTTOOLS we can rely
that it is present in the PATH, so no need to hardcode
it to /usr/bin.
(From OE-Core rev: a200d22b26aded093289cb9150b3f05f76578c83)
Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
,----[ Changes in 3.10.3 ]
| Brad King (1):
| CMake 3.10.3
|
| Craig Scott (1):
| GoogleTest: Rename TIMEOUT parameter to avoid clash
|
| Sebastian Holtermann (1):
| Autogen: Fix for the empty source file crash in 3.10.2
|
| Tianhao Chai (1):
| ccmake: fix status line buffer overflow on very wide terminals
`----
(From OE-Core rev: ae230e1f858f83d1ff063554b49bd3ee1f880f76)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change includes several bug fixes and improvements, including better path
handling (the existance of . and .. for files), handling of the sticky bit, and
syscall renameat2 handling and interception through syscall() which was breaking
coreutils mv operations on fedora27.
[YOCTO #12594]
[YOCTO #12379]
[YOCTO #11643]
(From OE-Core rev: ddbcb88849d5c07a4cbbdc90fa1ab4d369476f8a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the sqlite3 files ended up in python3-misc incorrectly,
this is caused becuse we couldnt add the whole ${libdir}/python3/sqlite3
folder on the package because we also have another sqlite3-tests
package that needs to include another folder from that directory.
This patch not only fixes the do_create_manifest script to handle this
situation, but also patches the manifest (created using the script)
which also fixes a hiddn runtime dependency that we wouldn't have seen.
(From OE-Core rev: 3324cb31670f33ffe193e550e3b3da8380b3c8c9)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a couple of python modules that contain folders themselves,
for that reason they also contain a __pycache__ folder inside those
directories, since we include the whole folder in the manifest, the
pycache directories end up with the files and not the cache files.
This patch catches that and adds the directories to the correct
structure.
(From OE-Core rev: df9401e7e69ce162e257e827d67eb217666e532d)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a minor release that fixes many important issues found since
1.10 release.
(From OE-Core rev: 7068024c1ee8a3ec03904d50860fc42d7c421f87)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the sqlite3 module was in python3-misc by accident, move the files
into python3-sqlite3 where they belong.
(From OE-Core rev: f06a8d20560b8e93cf875ee58eddda0a976e7b14)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport fix from qemu mainline for intermediate qemuarm64 hang
issue. Root caused in OE environment, issue with aarch64 qemu
logic of executing instructions that reenabe interrupts. See patch
commit message for more details.
Upstream-Status: Backport
(From OE-Core rev: aa33945fc7cf7bfa859c4091bcfa2695c422849b)
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pseudo is using a custom configure script that detects if it shall build with
extended file attribute support or not. The check is done by simply calling
'getfattr' provided by attr-native which is not part of the dependency list.
Due to the recent changes (recipe specific sysroot & cleanup of $PATH) this
call fails now when the recipe is being build for the first time (at least
when being build for nativesdk case). Explicitly setting up a dependency to
attr-native just to satisfy configure would be wrong also since the real
dependency is to attr/nativesdk-attr which are already part of the dependency
list (see DEPENDS). Therefore bypass the test in the configure by explicitly
enabling xattr using a configure option available in any case.
(From OE-Core rev: a7381eb16ba2183ed990a009bb8e82b4702f3d98)
Signed-off-by: Andreas Kaufmann <andreas.kaufmann.79@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ERROR: distcc-3.2-r0 do_fetch: Fetcher failure: Unable to find revision d8b18df3e9dcbe4f092bed565835d3975e99432c in branch 3.2 even from upstream
ERROR: distcc-3.2-r0 do_fetch: Fetcher failure for URL: 'git://github.com/distcc/distcc.git;branch=3.2'. Unable to fetch URL from any source.
ERROR: distcc-3.2-r0 do_fetch: Function failed: base_do_fetch
[v2]
upstream deleted the branch and the hash no longer exists.
Took the git snapshot from yocto and created a copy on my github.
There was no offical 3.2 release, only rc versions.
(From OE-Core rev: aee44c6b1c36fb1c1f760fec60087933d1e8ea79)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some architectures e.g. riscv gcc does not add -D_REENTRANT
when enabling pthreads. Help it here by adding these options
while gcc gets fixed
(From OE-Core rev: 856aa732cac62a2c45473bcc91f7d0c423c52f81)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the python{3}-setuptools to the latest stable version
Tested on the qemu with core-image-minimal
(From OE-Core rev: 8422880acf65802dbaa08238ae9e63670ed49ff3)
Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
