Eliminated the section A.2, which had an example of how to use
menuconfig in the kerenl example appendix. The information is
now merged into the similar section in Chapter 4 "Common
Tasks." It was decided that the Appendix A examples in the
manual were too detailed for a general development guide.
(From yocto-docs rev: f88ec421b257657f02cc0f132ec2580c17f07cef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this statement in the linux-yocto-3.4.bbappend file needs to
have the comment removed so the source can be found.
(From yocto-docs rev: 821162221818f5ce53bb903aeef57c85314f5083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Kernel example appendix I changed some remaining 3.2
kernel strings to 3.4. Also I added the OE_INIT_FILE variable
from poky.ent for use instead of the "oe-init-build-env" string.
(From yocto-docs rev: 1d9d8d72d197bdd81756eed7fe1529f341de6089)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time the kernel revision is bumped (e.g. 3.2 to 3.4)
Some of the figures would be out of date. The reason is they
had pathnames that included the release of the kernel.
For previous YP releases I was adding logic to the Makefile
to be sure to catch the right files dependent on the branch
from which the documents were being built. This scheme is
not scalable so I decided to make the figures generic by
adding a note within the figures explaining the place-holder
"<x.x>" as part of a pathname. Thus, three new figures were
added to the folders directories of the dev-manual and the
mega-manual. Correspondingly, the 'denzil' version of the
figures were deleted.
I modified the Makefile so that if the BRANCH is not edison
or denzil then the generic figure set is used. I have to retain
the logic for both edison and denzil to cover the case where
a user clones or sets up an edison or denzil repo and then
builds out the manuals. Basically, it had to be backwards
compatible for releases prior to danny.
(From yocto-docs rev: 8283eed4b0b9ec164b87db99c35231f8731ac443)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the part of the example that sets up for the
first core-image-minimal build. Put in the variable to use
for the build environment setup script, updated some changed
output from some of the commands, etc.
(From yocto-docs rev: 0b4b2ddf9a78a9d6d218ed9a6f0acd3e876d9581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Danny, the "kernel-example-repo-<release>.png" file changed to
"kernel-example-repo-danny.png". To correctly make the dev-manual
and the mega-manual some things needed to change:
1. New figure created and added to both the dev-manual and the
mega-manuals figures directory.
2. The "kernel-example-repo-denzil.png" files from the dev-manual
and mega-manual figures directory was removed.
3. The Makefile was adjusted so a new BRANCH=danny area now exists
to set TARFILES for both dev-manual and mega-manual.
(From yocto-docs rev: 8b2ff6b657a1486559799e219baaec9fde2e5c6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the beginning of this appendix that references
the yocto-kernel script as a way to quickly manage kernel patches
and configuration.
(From yocto-docs rev: 35cd7f6a9722120e47ae8b422dd86593497ebf1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3180]
Final changes to the packages section. They were re-organized and
the set is complete and thus fixes this bug.
(From yocto-docs rev: 533b45c9d41330497bbd0da58b812a4738ba64a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This appendix is antiquated and needed removed. The BSP
development example is now in the BSP guide where it talks
about running the yocto-bsp script.
(From yocto-docs rev: 892ff450d79a7564a72f11eb7510d349ca71d47a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Appendix A (BSP) example had some rippling affects
throughout the doc set. There were several links into the appendix.
All these links had to either be modified (if possible) or simply
removed since the appendix will be removed.
(From yocto-docs rev: fff35abd87e945de1806eef63a56a956d104bf92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section now points into the BSP Guide where it talks
about using the yocto-bsp script to create a BSP. The prior
method was by hand and described in an appendix (A) of the
YP Development Manual.
FYI - this results in the removal of Appendex A in a future
commit.
(From yocto-docs rev: 5e1c44b1768b79dd1447ea47461b84248bd2111f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few edits to the respective sections that talk about required
packages. Some wording changes for headless and graphics
supported systems. Also, re-inserted the note about older
CentOS systems.
Reported-by Paul Eggleton <paul.eggleton>
(From yocto-docs rev: 112370758cf41104ff04c4996d4a432e6bd54be1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a walk through of the "Using the Yocto Project's BSP Tools"
section. Updated included altered output based on the current
example commands and scenarios.
Also made changes to the bblayers.conf file as the default
version for this file has changed.
(From yocto-docs rev: d8a2195e37d8f96702026e42bb43daf39852ffcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples were out of date. They did not show the
meta-yocto-bsp layer, which is there now by default.
(From yocto-docs rev: ea2e2e8a259bc3e629fb8087229872b9818a696a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was out of date. I copied in the most recent version
of the bblayers.conf file, which sets LCONF_VERSION to "6" now.
Also, added the meta-yocto-bsp layer to the example.
Additionally, I inserted a Note explaining the consequences of
removing the meta-yocto layer. The note references [YOCTO_#3176]
for more information.
(From yocto-docs rev: 532b72c5c18b2a9a61619164bae6216c91c2ecc9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the meta-yocto-bsp layer to the example listing in the
"Enabling Your Layer" section.
(From yocto-docs rev: 95fb13a1049ccaffb3531c93a28a3c480ea1a243)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reorganization of the packages section in the YP Quick Start.
These are now ordered still by distro but the listed packages
have been culled down to just the needed ones to run an
image on QEMU with graphical support.
A corresponding section in the reference manual now provides
the comprehensive list of packages for all supported distros.
The section in the reference manual is broken down by
distro and by function.
Finally, four new variables were introduced to track the
essential packages for each of the distros. The variables
are defined in poky.ent and follow the form
<distro>_HOST_PACKAGES_ESSENTIAL. This will make it so
we don't have to maintain this list of essential packages
in multiple places.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 839b441791980db82f4795454e976e606b486d25)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that this section correctly and accurately describes how Poky and
OE relate to eachother currently. The faq entry changed is
"How does Poky differ from OpenEmbedded?"
(From yocto-docs rev: ecc88ef12ec2faa48d05824e8b781a7d43e86127)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entry for the question "Are there any products using
the OpenEmbedded build system (poky)?" was updated. The
changes result in a better question and answer.
(From yocto-docs rev: cfc4a945738e891d20ab1a2a7002c5c421b0a225)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explain that we test with a set of reference hardware rather than only
supporting hardware that we have (avoiding any implication that the
build system can't support other devices). These are in the
faq entry in the poky-ref-manual for the question of how we can
claim Poky / OpenEmbedded-Core is stable.
* Adjust the language so that it is OE-Core friendly, with a link to
the Development Manual for the definition of OE-Core.
(From yocto-docs rev: 5ff1604dd383b26e918c319fcbe46dd1589cebc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we are using a layer-based approach, people do not
need to rely upon the Yocto Project team to add support
for new boards.
(From yocto-docs rev: 569ff9da7443f9654f288d0a4e62ef06ba34ba52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the patch from Paul a bit here to conform to
the style of writing plus to make things clearer.
(From yocto-docs rev: 87abf857cfcd8a0d78a48322fbe9ac5395b6ad30)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Took out the FAQ question about using Ubuntu Intrepid and
seeing build failures.
(From yocto-docs rev: 2885aa27904d4b31541f77ceeb54ad94a8e21378)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust a few sentences so that they make better sense.
(From yocto-docs rev: 67437c9f31fca0437e1f23ab78dd252f3ca0a903)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Document the new staticdev-pkgs IMAGE_FEATURES item.
(From yocto-docs rev: 64317edb209b8f9c720c4b1930a0d355d2db6b38)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the listing of the final SRCREV statements for the
BSP example.
(From yocto-docs rev: 0d0d5994c2653dda1171eaad226bbe1764a04440)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are partial for converting the example for BSP
creation from Crown Bay to Fish River Island 2.
(From yocto-docs rev: c7fc78a8453ad363138764aa30e377b56ce49f2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the reference to the Downloads page.
Also fixed the local branch in the meta-intel example so that
it uses the same name as the local branch created for cloning
poky.
(From yocto-docs rev: edac781b37bce0d0bca6a741186cfa53a512b73e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new branch is named distro plus poky revision
(e.g. danny-8.0). I had just the distro in there.
(From yocto-docs rev: 9490849f7f6dc815d1b676b15b3f38f671a49be8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quilt and Git flow methods there is a bullet that talks
about incrementing the PR variable. I changed the wording to
be in the context of recipes rather than packages.
(From yocto-docs rev: 64f6230251c023e469a346c0425834b950ed5c9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that describes changing the source code usees the
P* variables extensively to refer to names of the recipes. The
wording used was antiquated and exclusively referred to
"Packages." I changed to reflect the fact that P* variables
in general are refering the recipes and not the packages.
(From yocto-docs rev: bd3ef1c46fc7a3b0b2ff5ab60dc52e125f080e24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some of the links to information for the user-space tools
had become obsolete. Fixed them.
(From yocto-docs rev: 84e72204e34e45d9d8cae876710a46a83b61c0cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the preferred branch for the Eclipse example from
a hard-coded "1.3_beta" to use the DISTRO_NAME variable.
(From yocto-docs rev: 9393c5d1e44a1e326c73353b090c1d1c1a5833da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information in the #4 box to include the cross-dev
toolchain.
(From yocto-docs rev: 198ab4326369d8c74225d9de51bf536621ab2251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the item that talks about getting the root filesystem.
Realized that the cross-toolchain was not discussed in this
bullet for the case where a user does not use the ADT
Installer. Added text and references to correct that.
(From yocto-docs rev: ec2f5103471f047f7ed7e53cc22789c74ab506ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an earlier occurence of the "tm" for Eclipse product.
Also, changed the reference for modifying the kernel to point
into the appendex rather than self-referencing the same section
from where the reference originated.
(From yocto-docs rev: a85840611650c9124b6194acca59c8bfe71f566c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I standardized the use of the term "Source Directory" when
referring to the poky directory as set up on the host.
(From yocto-docs rev: 3eaf7a734a4eecab2be2c8e71bee4d6c2cb7788b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made this more accurate by including notes to edit the
source and use of menuconfig within the diagram.
(From yocto-docs rev: 91d3d2e935aab24c4bd96c5921a605cbbb7e3231)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
