Fixed:
WARNING: QA Issue: coreutils: configure was passed unrecognised options: --disable-acl [unknown-configure-option]
It doesn't support --enable-acl or --disable-acl, use
ac_cv_header_acl_libacl_h to fix the problem.
(From OE-Core rev: 1fc671938b2389866fb4a36801698caf4e92e05d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I used a for loop to build these packages more than 520 times, these
recipes never failed.
(From OE-Core rev: 7957c5bc2771a763d26e50e716733c6335cef3c2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting "EDITOR=/bin/vi" breaks on non-busybox systems, as
vim will populate /usr/bin/vi instead, and you get stuff like:
op3:~/poky/meta-builder$ git commit -s
error: cannot run /bin/vi: No such file or directory
error: unable to start editor '/bin/vi'
Please supply the message using either -m or -F option.
op3:~/poky/meta-builder$ which vi
/usr/bin/vi
op3:~/poky/meta-builder$
Since we've already specified a proper path above in the profile,
we've no need to call out where in the path vi lives, and hence
this will work with busybox and a full vim install w/o busybox.
(From OE-Core rev: dcdaa651f3180e4561d7d08f56bfb29f35f2085f)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ERROR: The recipe coreutils-native is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
tmp/sysroots/x86_64-linux/bin/kill
Matched in manifest-x86_64-util-linux-native.populate_sysroot
We have 8.23, so disable it rather than fix.
(From OE-Core rev: da6fbea919bd460a30423b16c48b79047d6c6030)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'dot.profile' supplied by base-files calls 'mesg'. For simple
images using busybox e.g. core-image-minimal, this utility should be
available to avoid errors on login:
-sh: mesg: command not found
Provide mesg with busybox.
(From OE-Core rev: 7ec6f8290910c242d6e58110c30b3ffbdff274e4)
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe was not usable as-is. A much better way of configuring package feeds
for opkg is provided by the distro-feed-config recipe in meta-oe.
(From OE-Core rev: 718d5c64069e7bc958f94daae2369fdefa4bafeb)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix systemd-timesyncd assertion
when networkd is disabled then we now do not
create /run/systemd/netif/links but timesyncd needs it. So lets
manually create this file when networkd is disabled so timesyncd
can still function
When enabling systemd-timesyncd we need systemd-timesync user
Backport patches to enable timesyncd when resolved and networkd
are disabled
replace the resolv.conf symlinink patch with a proper backport
Change-Id: I53f1a53eec4e4a4dbdfb7e8cd155d544ee5d81ec
(From OE-Core rev: 2a675bc63b22724f12e6ed6ff58d0f1d1e0d3b29)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available
(From OE-Core rev: 9ac88e3a9ac36ed83f01ac21db57a3c01a24385e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
stat command from stat package doesn't support '-L' option, so avoid
using it to get rid of boot errors like below.
Populating dev cache
stat: invalid option -- 'L'
Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
[YOCTO #7210]
(From OE-Core rev: 4ef8cc01906833847386fd441d87a89cbdda7e25)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change moves readprofile from /sbin -> /usr/sbin to match busybox,
the change allows update-alternative to correctly setup the links
[YOCTO #7225]
(From OE-Core rev: 43424eb3c8bf03a2f9ec331b78dd4040dd39eacd)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove 'util-linux' from DEPENDS so that we don't have the following circular
dependency issue.
systemd <--> util-linux
This dependency was first introduced into the recipe without saying any reason
about it. After checking the source files in systemd, I can guess that the
reason might be udev making use of libblkid. However, we actually have
./src/udev/udev-builtin-blkid.c. So this dependency is not necessary and could
be safely removed.
(From OE-Core rev: b45e54137cfb013fd473507d5d1406f8807e0e63)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix-configure.patch is removed as it's not appropriate, and the new
version of util-linux has solved the problem this patch is trying to solve.
util-linux-ensure-the-existence-of-directory-for-PAT.patch is removed as
the new version of util-linux has solved the problem this patch is trying
to solve.
util-linux-native.patch is rebased.
util-linux-ng-replace-siginterrupt.patch is rebased.
Add PACKAGECONFIG for 'pylibmount' to build out python bindings for libmount
optionally. util-linux-pylibmount is added to PACKAGES if PACKAGECONFIG has
'pylibmount' in it.
Fix PACAGECONFIG for 'systemd' as the new version has changed things related
to systemd. Now util-linux would have a dependency on systemd if 'systemd' is
in PACKAGECONFIG.
Fix SYSTEMD_PACKAGES, SYSTEMD_SERVICE and SYSTEMD_AUTO_ENABLE variable to match
the new version.
Four lines in do_compile task are deleted because they caused do_compile failure
and nowhere in util-linux are they used. Corresponding files are also removed.
(From OE-Core rev: 264e2fde3a8624c87d2451d2752c9f3ed8911672)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ptest which checks for correct udev rules fails.
Missing files and paths for the build host caused this.
(From OE-Core rev: 2c9773e71ed757f1ff3306eb716d22a71defeb25)
Signed-off-by: Max Krummenacher <max.oss.09@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #7230]
In certain system configurations TRANSLATED_TARGET_ARCH will not
expand in the right order for gcc-cross-candian-mips64n32 to be
generated properly.
This will cause SDKs to fail to generate properly.
Changing the global definition of TRANSLATED_TARGET_ARCH always
expands the ABIEXTENSION, which causes the OVERRIDES to pick it up
as well. This effectively defines a new class of overrides for the 'n32'.
The side effect is that we need to duplicate some mips64 overrides, and
redefine others that were previously 'n32' or 'mips64' exclusive to have
the correct semantics.
(From OE-Core rev: 4b3a2b703b20583bd107f00a297d972e9bfb514a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build suppport for mutibyte character handling only when
__OPTION_EGLIBC_LOCALE_CODE evaluates to 1.
Fixes missing .out suffix for several tests to be built.
Fixes building of locales needed for several tests. Do not use
cross-localedef to build locales. Use localedef built with the
newly built libgc instead.
Fixes:
[YOCTO #6809] [YOCTO #6796] [YOCTO #6797]
(From OE-Core rev: f01800d46de95f55d7a90d4a2523788368f7c025)
Signed-off-by: Juro Bystricky <jurobystricky@hotmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The getnetbyname function in glibc 2.21 in earlier will enter an infinite loop
if the DNS backend is activated in the system Name Service Switch
configuration, and the DNS resolver receives a positive answer while processing
the network name.
(From OE-Core rev: f03bf84c179f69ef4800ed92a4a9d9401d0e5966)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on commit 745dfbc869fd593d1b92e2bc9c01d589ab21ade3
"buildtools-tarball: package all of Python", we do the same here
for packagegroup-self-hosted.
The switch to the fetcher where it added BeautifulSoup revealed
a shortcoming in the python packaged for the self hosting (missing
htmlentitydefs). Here we fix it in the same way as what was done
for buildtools-tarball and include python-modules vs. all the
individual little chunks.
(From OE-Core rev: 4afbc5f7b2b8a6587110b16cda90e72c3e73a506)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gettext:
- Update parallel.patch, we only need a part of it.
* gettext-minimal-native:
- Update related files from gettext-native.
- Remove Makevars.template, we didn't use it.
- Remove iconv-m4-remove-the-test-to-convert-euc-jp.patch (can be
reverse applied).
- Update the COPYING (1995 - 2014).
* About upgrade gettext-minimal-native (for future's upgrade):
- Build gettext-native
- Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and
gettext-runtime/po/remove-potcdate.sin from gettext-native.
- Update COPYING when needed (usually update the year), do not copy
the whole COPYING file from gettext-native.
- Go to gettext-native's ${S}/gettext-runtime/m4:
> Remove lt*.m4 and libtool.m4
> copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/m4/
> tar czvf /path/to/aclocal.tgz *.m4
(From OE-Core rev: cd91b748e83bd5c040538aecf76823549662b3c7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This addresses 2 issues discovered trying to build a minimal libc with
libm option. By default nscd was always being built and without inet
enabled there were missing symbols.
[YOCTO #7108]
(From OE-Core rev: 89649881bcd0e76d6ee7c85c30e75bb01e1c004f)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-ptest also needs a Python interpretter. Also remove the redundant
comment.
systemd-kernel-install is a bash script that can't be trivially ported to POSIX
sh.
(From OE-Core rev: 9f6b34493d332f9eff54c3eb2da9483a344e6d3c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some cases we want the manipulation cross-canadian performance
on TARGET_OS, there are also cases like meta-environment where we do not
want this manipulation.
We did try and use immediate expansion to avoid this problem and it
works in the non multilib case. If we have a multilib that used an
extension, like for example:
require conf/multilib.conf
MULTILIBS = "multilib:lib32 multilib:lib64"
DEFAULTTUNE = "mips32r2"
DEFAULTTUNE_virtclass-multilib-lib32 = "mips64-n32"
DEFAULTTUNE_virtclass-multilib-lib64 = "mips64"
then the n32 extension case will be misconfigured.
It turns out saving an unexpanded variable is hard. The best I could
come up with was:
SAVEDTOS := "${@d.getVar('TARGET_OS', False).replace("{", "*")}"
and then
localdata.setVar("TARGET_OS", d.getVar("SAVEDOS", False).replace('*','{'))
which is rather evil, I'd challenge someone to come up with a nicer way
of making it work though!
Rather than the above madness, we modify cross-canadian to make the
problamtic code conditional.
This fixes the original issue (where a linux-gnuspe target was seeing
'linux') of
http://cgit.openembedded.org/openembedded-core/commit/?id=0038634ee6e2b6035c023a2702547f20f67c103a
but also fixes the multilib one.
(From OE-Core rev: 85ff3d6491c54aa712ed238c561742cda4f4ba07)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The CVE fix introduced problems with entity issues, we observed this
when building the Yocto Docs in particular. Backport the fix from
upstream so we can build our docs correctly.
[YOCTO #7134]
(From OE-Core rev: af501bd51f9a86edd34e0405bc32dabe21312229)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't have a homepage except gtk.org, use its reference manual page
as the homepage, which we can easily know whether it is a stable version
or not.
(From OE-Core rev: ef303442278c900cd6bfd529692cb9de80e31353)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Upgrade to upstream 2014.66; incorporates several minor bugfix
releases.
* LIC_FILES_CHKSUM changed because the copyright year changed; there was
no change to the license text itself.
(From OE-Core rev: 78f388e81cad5dfb6aea52da68f9b4523c88c5ad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Rebase python-sitepackages-dir.patch to 2.9.2
- Drop libxml2-CVE-2014-3660.patch which has been merged to 2.9.2.
- Add configure.ac-fix-cross-compiling-warning.patch to fix cross
compilation failure.
- Tweak do_configure_prepend, use configure.ac to instead of configure.in
- Add cmake files to ${PN}-dev
(From OE-Core rev: 06f555fa5a36dbf63b26c3734dbbd0b5af16dc33)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove sysprof from packagegroup-core-tools-profile that sysprof doesn't
support arch aarch64.
(From OE-Core rev: e185e96c2f4a1d4561a37764345556abef20ccfe)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add aarch64 to var BINARY_LOCALE_ARCHES. In libc-packages.class, it is
used to work with other vars to check and add cross-localedef-native as
a dependecy correctly.
(From OE-Core rev: 6ff3cdcaf1585c5ac99803e54baacdf850e0dc39)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With siggen being changed to alter the signature of nostamp tasks on the
fly, having these tasks as nostamp results in the SDK being rebuilt
every time, which is not desirable. In any case this is just legacy from
the days before we used signatures to take care of ensuring these tasks
get re-run when they need to be.
(From OE-Core rev: e9a211321b4570282d0d65a0bb519e05a3d477bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the system fetches dbus first, everything works and the checksum is
correct there. If dbus-test fetches first, the checksum is incorrect
and wasn't changed with the version upgrade.
Fix the checksum.
(From OE-Core rev: a5fc201961e62cf5d9088b6d66bb2d50aa84109d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upon inserting a USB stick or similar device, mdev will run
an automounter script that mounts valid partitions on
/media/<device>. The script first checks /etc/fstab entries
so that mounting on UUID or LABEL or using custom mount options
is still possible. If /etc/fstab does not contain particular
mount options, the script will create (and remove) the mountpoint
automatically.
The script also supports full disk partitions (devices without
partition table).
The following environments can be set in /etc/default/mdev:
MDEV_AUTOMOUNT=n (Disables automounting completely)
MDEV_AUTOMOUNT_ROOT=/media (Change the mount root location)
Automatic mounting for a particular device can be disabled by
creating a file "/dev/<device>.nomount". This is helpful in
scripts that create partitions for example, and want to perform
specific actions which require the device to remain unmounted.
A more complex variation (using LABEL based mounts) on this script
has been in use in OpenPLi for many years now, and I've used this
one on many projects already, so it's about time to push this to
mainline.
(From OE-Core rev: 19073fb991b3e2d2304e55f94e30674adf375197)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a line to mdev.conf that tells mdev to load kernel modules when
required.
For example, if you built wifi support as an external module, inserting
a wifi stick into a USB port will now automatically load that module
into the kernel and the wlan device will be ready for configuration.
Without this patch, you have to load required modules manually or force
them to load at system startup.
(From OE-Core rev: 11420b0566a6a085c6cb78f3f1495ed9c599e6fd)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplify the grep expression, use the more common "grep" command instead
of "egrep", avoid forking extra processes, join multiple invokations into
a single combined expression.
Change the touchscreen regex so that it also recognizes various USB
touchscreen controllers and the ad7879 i2c device.
Based on code used in OpenPLi and meta-topic.
(From OE-Core rev: e82353eb9f76b582122fda27c93339eac5553eb2)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mdev.conf references the find-touchscreen.sh script, but this file
was not being installed. Add the script to the busybox-mdev package.
(From OE-Core rev: 44f6df0dfac54845ef5c3ab1af5663d1b6c1d64b)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of /etc/init.d/udev-cache is in a conditional block which can be
replaced by a `[ ... ] || exit 0` to reduce nesting.
This also provides an opportunity to add some additional messages
when VERBOSE is set.
Capture and report errors encountered in the cache generation process,
using set -e and trap EXIT. These errors were previously being ignored.
(From OE-Core rev: a1357f3c78e46cd4297fefab56acf87342967132)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
