This error is seen on the Braswell RVP platform we have been using for
testing. The error is caused by atkbd.c keyboard driver, which is only
for AT and PS/2 keyboards. I tested a PS/2 keyboard with the board,
which worked fine, and the board does not have a separate AT connector,
so this error won't cause any functional issues.
[YOCTO #10110].
(From OE-Core rev: c9f83639242313ca04ec36b49602a8464e10dae8)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The NUC6 has issues bringing up Bluetooth early in the boot sequence. We
see:
[ 4.091790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 4.097326] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 4.145317] Bluetooth: hci0: Failed to send firmware data (-38)
Followed by this later on:
[ 11.509870] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 11.509988] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 13.090308] Bluetooth: hci0: Waiting for firmware download to complete
[ 13.090829] Bluetooth: hci0: Firmware loaded in 1549114 usecs
[ 13.090987] Bluetooth: hci0: Waiting for device to boot
[ 13.101958] Bluetooth: hci0: Device booted in 10818 usecs
Bluetooth does successfully come up and the firmware is loaded. This
behavior is consistent across all kernels I've tested.
[YOCTO #10628].
(From OE-Core rev: 045ee89342ea8ce16e78fea9f1c73d978d66a337)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were two missing cases to be migrated to the new framework: _qemutiny and
_ptest.
qemutiny was straightforward.
ptest on the other hand wasn't working even in previous releases; it has been
migrated from smart to dnf, and how ptest packages are gathered to be
installed, adapted to use unicode, and removed a lot of code that wasn't needed
anymore.
(From OE-Core rev: ee7c19546b686e852d01df25143504d9798d10d6)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
(From OE-Core rev: 233d36b0382a8b2e430c3377e50885d1a0c3ba21)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All documentation refers to dnf binary as 'dnf' yet make install
does not create one - it's done by Fedora's spec file when building
the rpm. Let's replicate this behavior.
(From OE-Core rev: 456c4a8ffc9a292d7a3e036d92baf4a8f14d1f45)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Printing a message which says "configure failed" without the log output
is effectively useless. If a command fails, print the output by default
and simplify the calling code which makes debugging any of these failures
much easier.
(From OE-Core rev: b6352ff001c29f0bff10c18879b92c5618ec645c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debian based distros has a builtin syslog module so when
try to load tests using unittest it references the builtin
module instead of runtime/cases.
[YOCTO #10964]
(From OE-Core rev: 9923e3cdb58c2b3c54ec5fe99b2cec4cdc9fff92)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
smart test requires to build the image using rpm packages, this check was
included, but it checked for PACKAGE_CLASSES=='package_rpm', and this is
not true when building packages for rpm and deb/ipk. So this would check
IMAGE_PKGTYPE instead.
[YOCTO #10964]
(From OE-Core rev: 570f50b30072a10c5eadfbbfea2647339ee85176)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeRuntimeTest class is not used anymore as part of runtime
migration, this particular case was missed, so fix it.
[YOCTO #10964]
(From OE-Core rev: d928e5166d8812e7e20bc95c0a8b5cb5439ec497)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This migrates the smart test from the old framework to
the new one. This has its own commit because smart
test was using bb and oe libraries that are available
when exporting the test cases to run in a different host.
Because of the removal of bb and oe libraries index and
packages feeds creation will be managed in testimage bbclass.
[YOCTO #10234]
(From OE-Core rev: 8d64ac4208e8dcb8a6fde6ea2959c9b3edfe2172)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This migrates current runtime test suite to be used with the new framework.
[YOCTO #10234]
(From OE-Core rev: b39c61f2d442c79d03b73e8ffd104996fcb2177e)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
