Resulted libtool contains references about paths from the build host
Below variables contains hard coded build paths from the host:
LTCC=
lt_sysroot=
sys_lib_search_path_spec=
LD=
CC=
compiler_lib_search_dirs=
predep_objects=
postdep_objects=
compiler_lib_search_path=
(From OE-Core rev: d27c4226f600584f83f66c86b0988a165e8ecb75)
Signed-off-by: Shiqun Lin <Shiqun.Lin@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch removes most of "dirty fix#1" which is no longer needed
(no dependency on python-pygobject-dev exists). A side effect is
that the pygtk code generator will also be installed.
Merge 'fix-path.inc' into this recipe as it is not used by any other
recipe.
(From OE-Core rev: 02985d315f71126d3af789b0666dbf428f586e4b)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libgcc_s.so.1 is needed by running ptest, so add libgcc to
RDEPENDS_${PN}-ptest.
(From OE-Core rev: c7eca550b0c11c040440ee2610c5eb1e78ed5be4)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove two backported patches:
0001-Work-around-conflict-between-sys-ptrace.h-and-linux-.patch
strace-fix-64-bit-process-detection.patch
Update two patches to fit new version:
Makefile-ptest.patch
strace-add-configure-options.patch
Add coreutils, grep and gawk to RDEPENDS_${PN}-ptest for making
ptest pass.
(From OE-Core rev: 826e36643a3fcb8b4ee4ed79612c63c3a9cc1536)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value for this is ../../lib which ends up with
something like:
| ./sysroots/x86_64-linux/usr/bin/perl-native/perl5.20.0.real \
| "-I../../lib" "-I../../lib" "-MExtUtils::Command::MM" -e pod2man \
| "--" --section=0 --perm_rw=644 perldoc.pod blib/man1/perldoc.1
in this case, nativeperl will find libraries from the target build,
When using an x86-64 host to target Haswell, you can end up with
../../lib including precompiled modules which use Haswell
instructions, it fails with:
| Running pm_to_blib for dist/if directly
| Skip ../../lib/if.pm (unchanged)
| Makefile:457: recipe for target 'manifypods' failed
| make[1]: *** [manifypods] Illegal instruction
So set it to use the -native ones instead of those from the target
build.
(From OE-Core rev: 82ac2a29126dc38d23c278b82d129d73b17000b7)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
apt-file calls run-parts with options --list and --regex:
root@neopili:~/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/work/bobcat_64-poky-linux/apt/0.9.9.4-r0/apt-0.9.9.4# grep run-parts cmdline/apt-key -rn
187: for trusted in $(run-parts --list $TRUSTEDPARTS --regex '^.*\.gpg$'); do
busybox implementation of run-parts does not support --regex. And --list option is not enabled on yocto busybox configuration.
(From OE-Core rev: 40dd71a4e0beade84ecd686559243a10e55c3a2d)
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If configure or any of the components it uses from the shared work directory
change, do_configure may fail.
An existing do_preconfigure was created to handle these conditions, but
a 'sed' operation was missed, and a call to gnu-configize was also missed.
(From OE-Core rev: 21c2cfff14442cf224e3568bdbb9bcd4070be247)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patch merged upstream.
Also drop old arm/thumb patch which breaks the compile on arm. We've
had this since 2010 (or longer) and the issue has likely been fixed
upstream by now. If not someone with more knowledge will need to
figure out the fix against the current codebase.
(From OE-Core rev: b171f30701aae36f8512ed0b7472984671589c5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If configure/compile was rerun for perl, changes such as libdir changes
were not being picked up. To fix this we we add "make clean"
functionality, if the makefile is present.
We also in this case need to delete the .so file, else some perl modules
try and load the target arch libraries leading to build failures. I'd
love it if there were a better way to do this and am open to better
proposals but this was the best I could find, not being a perl expert.
(From OE-Core rev: 3b8adee2756085df47b90357eed4c20ee98c7cd1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out we have quite a number of Makefiles out there without a
clean target. Rather than have all cases code an empty do_configure, add
a CLEANBROKEN variable which when set to "1" will disable the attempt to
"make clean".
This patch also adjusts various recipes which either have this problem
fixed, or have been reported to have make clean failures.
(From OE-Core rev: 45b7d3add14eafc25da62bab68d4ae133f8dcb57)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove un-needed PR and INC_PR
Rename vala-0.16 to more geneic vala
Now correctly supports seperate build/source directorys so drop -sepbuild tag
(From OE-Core rev: d5624272824795b85047d8064077bc8458cbfa67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The first patch fixes the ICE in dwarf2out_var_location, at
dwarf2out.c.
r212171:
* except.c (emit_note_eh_region_end): New helper function.
(convert_to_eh_region_ranges): Use emit_note_eh_region_end to
emit EH_REGION_END note.
* jump.c (cleanup_barriers): Do not split a call and its
corresponding CALL_ARG_LOCATION note.
But it introduced a regression issue:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63348
so backport the fix for the regression as well:
r215613:
PR rtl-optimization/63348
* emit-rtl.c (try_split): Do not emit extra barrier.
(From OE-Core rev: de52db1b1b0dbc9060dddceb42b7dd4f66a7e0f3)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add site_perl and vendor_perl directories in create_wrapper
this fix bug when searching for libraries in these directories.
[YOCTO #6890]
(From OE-Core rev: ea2584213e2e852157ec2490c84cc6c03feb4b40)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lines in the readme referring to the license moved, license is unchanged.
(From OE-Core rev: 330c39685b5d71d4382d4b4930581de07ed689c6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This solves the following warning:
docbook-xsl-stylesheets-1.78.1: docbook-xsl-stylesheets requires /usr/bin/perl,
/bin/bash, but no providers in its RDEPENDS [file-rdeps]
(From OE-Core rev: d7a277b35bcc67050046c76fb70412101679a545)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the following config and build image:
...
IMAGE_INSTALL_append = "shadow man-pages"
EXTRA_IMAGE_FEATURES += "doc-pkgs"
...
There is an error during install with --attempt, and it breaks the build.
...
|error: file /usr/share/man/man5/passwd.5 from install of
shadow-doc-4.2.1-r0.i586 conflicts with file from package
man-pages-3.71-r0.i586
...
For complementary and 'attemptonly' package processing, we should make sure
the warn rather than error messages reported.
[YOCTO #6769]
(From OE-Core rev: beb2e989e24e671fecd37805876dfb2375ee0df6)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some previous version of this recipe was errantly removing the pygtk-2.0.pc
(pkg-config) file. This is needed for other packages to be able to build
against this library.
Also update the .pc file to match current pkg-config use (libdir was missing).
(From OE-Core rev: 8c6158d7bcca2ecf3e150d1e8eaaaa4ece58e1e2)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport patch from:
https://hg.python.org/cpython/rev/af46a001d5ec
SysLogHandler converts message to utf8 and adds BOM, supposedly
to conform with RFC5424, but the implementation is broken:
the RFC specifies that the BOM should prefix only unstructured
message part, but current Python implementation puts it in the
middle of structured part, thus confusing RFC-compliant receivers.
(From OE-Core rev: c51caffe5ac0d49844dcbac7967f609d44c20470)
Signed-off-by: yzhu1 <yanjun.zhu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg remove perl --force-removal-of-dependent-packages
...
Removing package perl-module-extutils-mm-dos from root...
...
Removing package perl-module-extutils-mm-dos from root...
You can force removal of packages with failed prerm scripts with the option:
--force-remove
No packages removed.
Collected errors:
* pkg_run_script: Internal error: perl-module-extutils-mm-dos has a
NULL tmp_unpack_dir.
* opkg_remove_pkg: not removing package "perl-module-extutils-mm-dos",
prerm script failed
...
While remove pkg with '--force-removal-of-dependent-packages',
pkg may be added to remove list multiple times, add status
check to make sure pkg only be removed once.
[YOCTO #6819]
(From OE-Core rev: 476f864b1564265469b5c9074c1f262bce21f119)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
NEON instruction VLD1.64 was used to copy 64 bits data after type
casting, and they will trigger alignment trap.
This patch uses memcpy to avoid alignment problem.
(From OE-Core rev: a31080021ad3ecfb92220dcb8c717928db268f1e)
Signed-off-by: Yuanjie Huang <Yuanjie.Huang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
Same fix on python 2.xx is:
1181112cf65bc[python: do not replace ccache in the ]
(From OE-Core rev: 9f2398a0ff42389052155d971f136a37c5dc80da)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'dest' and 'src' can be same, we need to save the value of src32[2]
before swaping it.
(From OE-Core rev: b7936bacf0cc89bdda6722d317274bd4a3af840a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnu-config can't cope with a "make clean" so disable that
newly enabled functionality.
(From OE-Core rev: 2b0e78267df0ad708a5c15871757ca0db178621f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various pieces of the code assume that the --sysroot option gets passed
into the compiler tools. By having a "sane" default, we don't always
spot when this occurs and this can later show up as breakage in sstate,
or in usage of the external toolchain.
We've long since talked about poisoning the default such that it will
break unless the correct option is specified. This patch does just that.
If this patch causes something to fail to build, it most likely means
the various compiler flags and commands are not correctly being passed
through to the underlying piece of software and that there is a real
problem that needs fixing, its not the fault of this patch.
(From OE-Core rev: 04b725511a505c582a3abdf63d096967f0320779)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds a flexible way to configure the CMake in SDKs. It adds
a toolchain configuration script which supports subscripts for
extensions, as for example Qt5.
(From OE-Core rev: 4143f3b0ce0d0c52f5b0babc1bb16ac0ac9610eb)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of building specifiaclly for native a static fork of unifdef from
2007, simply package the latest tarball.
(From OE-Core rev: f642a9753b33c2f35d502b6721601fc690f674ec)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A regression is introduced by commit 66573093:
[ rpm: Fix rpm relocation macro usage ]
_usr turned out to be a relative path to support dyanmic config after
that, but it's being used somewhere as a indicator to locate substrings,
so we must get the real path of it in advance.
(From OE-Core rev: 1247955a907f51aac7efd305d26856e263c11a65)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building upower from meta-oe, the following QA error occurred:
ERROR: QA Issue: package upower contains bad RPATH
It appears to have been caused by one of the cases fix-final-rpath.patch
is meant to address but missed. So this change fixes the additional case
that was causing upower to have the QA error.
(From OE-Core rev: d2b2bb7cedb678c9f67ef1d9170fc427d9beee1e)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_rootfs takes a very long time when build host has mounted many NFS
devices. syscall lstat() was being called on every filesystem mounted on the
build host during building.
The reason for the lstat() is that rpm is verifying that enough free disk space
is available to do the install. However, since the install is into the target
rootfs it should not matter how much free space there is in the host mounts.
Add checking for "rpm-ignoresize", by it, smart can make whether RPM skip
checking for diskspace when install a rpm package.
(From OE-Core rev: fc0668a019eca422540ceab3efcd2b2a27dd79e0)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When build fs with mtools-3.9.9, has file /usr/bin/lz in rootfs,
it is the symlink to uz:
root@qemu3:~# /usr/bin/lz
-sh: /usr/bin/lz: No such file or directory
$root@qemu3:~# ls -l /usr/bin/lz
lrwxrwxrwx 1 root root 2 Jul 18 18:07 /usr/bin/lz -> uz
root@qemu3:~# uz
-sh: uz: command not found
But the uz isn't actually exist, so the result is that lz is a
broken symlink.
The root cause is that uz hasn't been installed when install-scripts.
(From OE-Core rev: 7308da9ccd4b8b9b5077aacd0442be28a6c73c61)
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"file" command in exported SDK doesn't work:
...
$ file sysroots/
file: could not find any valid magic files!
...
In oe-core commit 68d548cbae729eaea8ce1403dc95ff63c4a7375c,
it added wrapper to file-native. Do the same thing for
nativesdk-file.
(From OE-Core rev: 69a3ab38d1c725c2b575065739cae4a3b45015a2)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If DISTRO_FEATURES contains "largefile", force the size of off_t to 8 as
a workaround for having ac_cv_sizeof_off_t=4 on 32-bit systems. In
future we will likely drop the value from the site file, but for now
this is a slightly safer fix.
Fixes [YOCTO #6813].
(From OE-Core rev: a8216030ee6c65531de8fbf3eed878a345a94edc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes gcc bug 6144, which in my case exhibited itself as a kernel
module that failed to load. This was because static platform_data
structures were being corrupted with the optimiser being set to any
value other than -O0.
Originally-submitted-by: Peter Urbanec <openembedded-devel@urbanec.net>
(From OE-Core rev: 365221f7285c0e392f573deaab3b1e00b12bc293)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when MACHINE = qemux86-64 and libdir = /usr/lib64:
mv: cannot stat `/path/to/image/usr/lib64/perl-native/perl': No such file or directory
The perl-native files are always installed to /usr/lib on both 32/64
bits targets.
(From OE-Core rev: fad6d25e548cb82c2106eb30ccdc0b8f3408de0a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd expects fsck programs to be located in /sbin and fails for
dosfstools with
| Checking was requested for ..., but /sbin/fsck.vfat cannot be used: No such file or directory
Other fsck programs (e.g. ext4) are located in /sbin already so move
vfat programs into this directory too.
(From OE-Core rev: fa579cb243b8441d95e6c129e07d9e141f808539)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libffi is generally present as it's also a build dependency on glib-2.0, but
explicitly declare it for determinism.
(From OE-Core rev: 85232b154dbaf3fc2ed3fa9291e3cbeaa7f318ab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Makedoc.sh script uses the following line to set TMPDIR
export TMPDIR=`mktemp -d ${TMPDIR:-/tmp}/ldt.XXXXXXXXXX`;
and then later in the script:
chmod u+x $TMPDIR/linuxdoc
Since TMPDIR is not set the script will default to /tmp and if /tmp
is set to noexec (which is becoming more common), the chmod call fails.
(From OE-Core rev: 3a8b8812ac1b9a724f11b2011f8ee3416ac3d4df)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pseudo 1.6.2 fixes problems with 64-bit inodes and some underlying issues
involving file renames that could occasionally cause very strange behaviors
files being deleted, linked, or renamed, mostly observed as strange
recovery if an inode got reused.
(From OE-Core rev: b2c6a032d6e5deb07e76ed75fcd0931fad6a748c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some architectures can mix different TARGET_OS values, in most cases
we just use one but in the ppc case, can use two different values. In this
case, to use one toolchain with both, we need to ensure the symlinks exist.
This isn't ideal but does fix the ppc toolchains for the release, after
which better ways of handling this can be investiaged. Without this, failures
in the C++ toolchain are seen.
(From OE-Core rev: 112641117f1152bad8a806f1aa872a67575d5316)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a proper sysroot specified in the meta-environment script now,
which isn't a bad thing. We adjust the sed expression to cope with this.
That means the SDK installations in non-default paths start to work again.
(From OE-Core rev: 3be7b59893ed77f63eeca35b686df06a1dafb53d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
