Under certain contitions such as local file:// mirrors of all files,
bitbake might not check checksums. This is not desirable and we should
always check the checksum where possible.
This only exception to this is the git mirror tarball case where the
checksum is unknown but we need to create the .done stamp for other
reasons. This patch preserves thta functionality but in a more specific
section of code where this doesn't interfere in normal checksums.
(Bitbake rev: 2592a43e422c06a6f6174ada562e9c8ba25e1ec1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under certain circumstances, bitbake could remove files which were
outside its control since it unconditionally removes ud.localpath.
In the file:// case this can point at external paths.
This patch converts it to use the clean() method which will remove
files when its safe to do so but not in the file:// case since the
file:// handler has an empty clean method. This means bitbake no
longer removes files outside its control and is generally much safer.
(Bitbake rev: 9ad1cebe2220b41da2141cdb3f0a403abb46d77c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With floating revisions and no specified branch, the fetcher could fail
with some obtuse errors. This was due to the branch name being set to None
which makes no sense. This patch reworks some conditions to avoid this.
(Bitbake rev: 740c58d43cfb1445dd126e4827bb70ce988ca107)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows some simplifications of the function and is slightly faster.
(Bitbake rev: 5999dc9985ad087c036611bfaa59b090a08781a6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't check for network access before grabbing the the current head,
cloning, or updating a clone when the protocol is 'file'.
(Bitbake rev: d5847bc5254b9d2f28a6b574f6157d1286add27c)
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As UI request, in recipes selection page, if user exclude a item,
the related depends recipes will be excluded together,so the view
clearly to add it.
[YOCTO #2100]
(Bitbake rev: c9eed04c6275ef2c694f89e047f85c7de76f89b6)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For similar reasons as the nocheckout option, packages that need
enhanced control over the checkout and branch creation on a repository
may want a complete mirror/bareclone created of the repository when
performing the unpack.
This is useful/required when a local respository is being used, but
local tracking branches have not been created for all branches that
a given recipe needs to manipulate. The standard git clone operations
will create remote branches for the branches that are local to the
source repository, but branches that are remote do not translate to
the destination repository. Doing a mirror/bare clone of the source,
makes all branches available to the repository.
This is a particular use case, but the ability to do a bare clone
creates great flexibility in recipe space, with no impact to recipes
that don't need this functionality.
To implement this, a new option 'bareclone' is craeted which creates
a mirror copy of the repository and leaves it bare in the unpacking
phase. A recipe that uses this option must both checkout and debare
the repository itself.
(Bitbake rev: 82482aae6f311c994275fb0b6b32d954bbfc78c3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To quote my report of this to the git mailing list:
"""
I have a problem with git clone commands using alternates failing by
mixing up different repositories. I have a situation where I could end
up with both:
/srv/mirrors/repo
/srv/mirrors/repo.git
as bare clones.
I then try cloning "repo" with alternates with the command:
$ git clone -s -n /srv/mirrors/repo /tmp/foo
Cloning into /tmp/foo...
done.
$ cat /tmp/foo/.git/objects/info/alternates
/srv/mirrors/repo.git/objects
Note how I'm now referencing repo.git, not repo. This doesn't work as
expected giving some very bizarre results when actually using the
repository.
I appreciate this is a rather bizarre corner case but its one that is
breaking the build system I work with. Ideally people would use a
consistent URL for the same repository but we have an example where they
haven't and this really shouldn't break like this.
Looking at the code, the cause seems to be
clone.c:get_repo_path():
static char *suffix[] = { "/.git", ".git", "" };
since its looking in order for:
repo/.git (fails)
repo.git (suceeds, incorrect)
repo (never looked at)
I'm not sure what would break if that order were to change, swapping the
last two options.
I can "force" the issue by running:
git clone -s -n /srv/mirrors/repo/ /tmp/foo
but this results in the slightly odd looking:
$ cat /tmp/foo/.git/objects/info/alternates
/srv/mirrors/repo//objects
which does at least work.
"""
This patch adds the trailing slash to ensure the correct repository is
referenced at the expense of some ugliness in the alternates file.
(Bitbake rev: d978e7b35550e3785c7c567ffe4c40a3c3947450)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our checks in the fetcher code assume that if the downloaded
file exists, the download finished successfully; this meant that if
BitBake was interrupted in the middle of a fetch then it would not
resume the fetch the next time, but instead attempt to use the
half-fetched file and usually fail as a result.
Since we're already writing a ".done" stamp file when a fetch completes,
just check for its existence and assume the download didn't complete
successfully if it isn't present.
(Bitbake rev: 721e986624529aedef96dd06c9fe6243f2897b10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the warning for the initial fetch failure a single line - we don't
need the full command and output here yet, but write it into the log in
full as a debug message. However, if fetching from mirrors fails as well
then print out the full details for the first error that occurred as an
ERROR rather than a WARNING.
Since this is logged as an ERROR, combined with an earlier patch it
suppresses the full log which does make the output much more readable
for any fetch error.
Fixes [YOCTO #1832].
(Bitbake rev: 6bbdc7d259c0cc041b62dbdb26cfc3ec6edcb6f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The termination signal and exit code of the fetch process were not being
decoded correctly, resulting in bitbake reporting that the process
terminated with a signal of the exit code (if it was under 255). There
are functions in the Python os module to do this decoding correctly (for
Unix at least), so let's use them.
(Bitbake rev: 50aea9a76e40cf71cc3f1462c88298e4846a031c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The "name" argument to FuncFailed is rarely used as a name in actual
usage within bitbake, so don't treat it as one in the output.
* Don't print URL for FetchError if it was not specified (i.e. don't
output "Fetcher failure for URL 'None'")
* Don't include URL in "unable to fetch from any source" message since
we supply it to FetchError and it will be printed anyway.
* Don't include URL in "checksum failed" message for the same reason
(Bitbake rev: 86811bd85e2e453ee92a05fe60160d9b49ac69e8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Local cloning of git repositories from DL_DIR into WORKDIR fails when
using ssh URL with port specification e.g.
"ssh://user@host:port/path/to/repo.git". Git fetcher clones such remote
repository into "${DL_DIR}/git2/host:port.path.to.repo.git". However,
when clonging from ${DL_DIR}/git2/host:port.path.to.repo.git into
${WORKDIR}, git fetcher fails with "ssh: Could not resolve hostname
${DLDIR}/git2/host: Name or service not known".
A solution is to replace ":" by "." in host component, similarly as it
is done when replacing "/" with "." in path component, so that local
clone directory in DL_DIR looks like this: "host.port.path.to.repo.git".
(Bitbake rev: 1f2867b79f1cd2bfbdc849ba5677a39db6fa3396)
Signed-off-by: Juraj Hercek <juraj.hercek@jhksoftware.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_STRICT_CHECKSUM caused a backtrace as the FetchError parameters are
incorrectly specified such that FetchError is being passed 8 params
when it's expecting 3. This fixes the parameters so we're passing a
formatted string and the url.
(Bitbake rev: b8b2f4287c9125542b18a294c0a94ed89a7e73a8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you specify a mirror like:
file://.* http://linux.freescale.net/yocto/sstate-cache
it won't work as you expect whilst:
file://.* http://linux.freescale.net/yocto/sstate-cache/
will since it has the trailing slash.
This patch handles both cases correctly. It also adds some debug to
the uri_replace function since its near impossible to debug it without
some kind of output.
[YOCTO #1578]
(Bitbake rev: a0246bf09c93bb657eaf6ba61d090b247ed33640)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Defaulting to any file in DL_DIR as the first match for a file:// url
doesn't make much sense and can lead to unexpected results.
This patch changes the logic so this is the last fallback location
instead. Whether it should be using DL_DIR at all for this is a
good question but something for another patch.
[YOCTO #1710]
(Bitbake rev: 5597a68fac0954c682b67471722c2643e2415f99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch improves the usability of checksums by only requiring one checksum
be defined.
Further, checksum verification will provide as much information as possible
at, rather than a bit at a time. No longer will you need to run fetch, see an
md5sum mismatch, fix it, run fetch, seen an sha256sum mismatch, fix it and
fetch again. If neither checksum is defined we now report both missing sums
at once - rather than one after the other.
Finally, if both sums are incorrect, we'll report both incorrect sums at the
same time.
Fixes part of [YOCTO #1399]
(Bitbake rev: 30ca41e596955fcbbe1ae6f4436ecf14cef96f8d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git could need these environment variables when working behind
a proxy
(Bitbake rev: dca46cc2e1c75b6add2c4801e2994a4812745f5b)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git fetches can fail (or at least return failed) when trying to
fetch and prune rebased branches. This patch simply adds a -f
to the git fetch command so these failure are ignore
Generally, if some SHA was rebased away it's not coming back so
there is no point in not doing this force
(Bitbake rev: a7b75e4db52445b30ec0fc0053dcf454f5f7d2db)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The _build_revision method in Hg class gets called with the wrong number
of arguments. This tiny patch adds a 5th argument to the method
declaration to prevent python from throwing an exception.
(Bitbake rev: 623e9c7f7a9cf12b8c81c26cc608990682a601dd)
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the git fetcher's subpath (path within the git repo to fetch)
option set the destsuffix (destination directory) option by default.
This reverts the behaviour of subpath to the same as when it was
introduced.
Based on a patch by Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
(Bitbake rev: 3e7f8afeacf7c8c8de3e87778a3907e33d4a06b3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* in some cases there could be output like this
ERROR: ld.so: object 'libpseudo.so' from LD_PRELOAD cannot be preloaded: ignored.
before wc -l output and returned 'output.split()[0] != 0' is always True
(Bitbake rev: 3a54dcc09a12406ec6cf22b4b1a2cc4fc203822c)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* logging/logger typo was fixed in 38a598731b49c8a0ba0ede570adc33eb1e848235
but debug level is still missing
(Bitbake rev: 9de432fe2348cdbc93037bb49abb508d1fd38336)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the wget fetcher to not emit the commands output when calling checkstatus, this
matches the behaviour of the git fetchers checkstatus() method.
(Bitbake rev: 5896d8ff7bcf85b3bab20fc27c4c15e87f86b4d9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a user has a ~/.gitconfig file, git fetch --all will reference it. To avoid
this we should run git fetch with an explicit url telling it to fetch all
references (which includes tags).
I'm assured this means git won't reference the file, see the discussion on the
git mailing list (subject Overriding ~/.gitconfig using GIT_CONFIG).
[YOCTO #1134]
(Bitbake rev: 8540c09d4e509e3277940464c71174d8a0aca6ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use git ls-remote to implement checkstatus command for the git fetcher.
(Bitbake rev: 0ed281feb6d244d3700da484f4e83394ae394f93)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if checksum mismatch, fetcher will try mirror,
and if mirror fetching fail, it will show error "Unable
to fetch URL xxx from from any source" which actually
hide the real reason and make user confuse.
so showing warning message will make it more clear.
Fix [YOCTO #1256]
(Bitbake rev: b3e924297d670963714343d02f7898798fec84fd)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is for [YOCTO #1085] fix.
If the upstream fails a checksum, retry from the MIRROR before giving up.
This will add more robust fetching if an upstream serves a bad file or webpage.
fetching of distcc prior to the move from samba -> googlecode is a good example
of this.
(Bitbake rev: b631e922257de52bf2247c01152d9856c870e7d0)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the git fetcher can malfunction when branches change in remote
repositories since whilst the update code updates the "origin" remote,
this isn't linked to the local heads.
By passing the --mirror option to 'git clone' and 'git remote add',
linkage between the local heads and remote heads is created with a 1:1
mapping, hence all the appropriate heads are then updated correctly.
This fixes some issues which have been seen with the Yocto autobuilder
mirrors.
(Bitbake rev: 3725602ec53df116dc108b3197a426b86ca43d5f)
Signed-off-by: Richard Purdie <richard.purdie@linux-foundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an invalid 'protocol' parameter is used in a git SRC_URI,
the error reported was not helpful:
ERROR: Function 'Fetcher failure for URL: 'None'.
<environment dump>
fatal: Could not make temporary directory: No such file or directory
So instead check that ud.proto is set to something valid, and if not
raise a meaningful ParameterError which explains that the protocol
type is the source of the problem.
This fixes bug [YOCTO #1142]
(Bitbake rev: a2a29b72275ab03a263f4479a590b92111a0d6a8)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update exception handling syntax to use the modern style:
except ExcType as localvar
(Bitbake rev: dbf5f42b06bef81749b13aa99945cc1292a6676d)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The symptom of this problem is something like a cvs url which specifies
a username where the username is then passed through to something like
an http mirror.
This patch fixes things by ensuring empty entries are preserved in the
new URL.
(Bitbake rev: c1d978d7bd1ac8eb1e2d50029ab2384be9f72fb4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git command string logged via check_network_access() does not match
the actual command executed in a few places. Ensure that it does.
(Bitbake rev: 10f3ca52dc274cd8b240987cfd7cd003aeda7ab1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace a call to print() with logging.debug() and flesh out the
message to clarify the state being reported.
(Bitbake rev: 9a28f7744e2f4224e7c097b8c4c1d49731b9a47e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
current git fetcher unpack method only checkout index and working tree,
but did not did not update the git branch in ref/heads, so user may not
get right info in ${S} by using git.
this patch enhance the unpack by using git checkout to fix this issue.
Fix bug [YOCTO #1089]
(Bitbake rev: c0eb89054aef4957966f98b44e7f3cce14fb337a)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
