Fixes [YOCTO #5442]
Updated the TMPDIR variable to call out the scenario where a user
might want to separtely set TMPDIR to a local drive and thus be
able to have the Build Directory on NFS.
Updated the "Build Directory" term with a note indicating that by
default, TMPDIR is inside the Build Directory and thus cannot be
on NFS. However, the user is able to by-pass that per setting
TMPDIR separately outside of the Build Directory.
(From yocto-docs rev: a5a308c512a3f4285bce16f17974dbf6b67432b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5766]
In the ref-manual, I added "Eclipse" use in the title for the
"Graphics Support" packages because the "xterm" package is required
for graphics support across all distributions.
In the dev-manual, I specifically called out the need for "xterm"
as a host package at the top of the section describing workflow
with Eclipse. I also updated the cross-reference links to the
host package and Linux distro requirements to point into the
ref-manual, which is more comprehensive, than into the QS.
(From yocto-docs rev: d3405be506fcb113f01d4fcba4631db80a1ed5dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4601]
Added a couple notes saying that you need to be in matching
branches for meta-intel and poky.
(From yocto-docs rev: 02bd63829b1d98f21183a10707753e9767bfe68e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2424]
Some imgage names were cleaned up to have more meaningful names.
These doc changes here take care of changing "core-image-basic"
to "core-image-full-cmdline".
Five instances changed.
(From yocto-docs rev: b758f9645e66867b5728da1dd989bae70a216fcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5406]
In the "Making Sure the Packaging is Done" section, I added the
Summary parameter the laundry list of parameters for the
do_split_packages list in the section. Paul Eggleton reviewed
the change and approved it.
(From yocto-docs rev: 4c4f60ee611921d9f0f835a081b449565382ab90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits. Needed to add a few cross-reference links.
(From yocto-docs rev: 47d7c408984a552a6c5d25ac880b50634c576cc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the way I referenced the read-only-rootfs feature. Since
it is something on the right side of a variable equation, I decided
to not render it in a Courier font. I have quoted it.
(From yocto-docs rev: 90804e71e43cddd3ac7c194a677acaab0c866ed6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mainly changed the way I referred to Systemd and SysVinit. I was
rendering them in a courier font, which was not correct.
(From yocto-docs rev: 179ae65ffdfcf59c36e4a3d315855d50722ad890)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I try not to use <class>.bbclass when referencing a class in
text unless specifically noting the .class file itself.
(From yocto-docs rev: 92c010a198b5c2e1da2ad979e6ca41cb7cd96e7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a reference to a class to conform to how it is done in the
books.
(From yocto-docs rev: df925b87e4b4962aca913677d8ea01b60b8f99dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits. Created some links at the top for organizational
purposes. Clarified what the linux yocto Git repositories are.
(From yocto-docs rev: adbb8ecb0bce5775153d43bec4b70b2439bc8846)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eliminated the redundant [required] and [optional] side-notes
for some variables.
Minor fix to re-word use of "append files".
(From yocto-docs rev: 9db7059c9b95871cf876d6d75f8377de943bff85)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit about the layer creation in the patching the kernel
section. The example does it by hand and now you could obviously
use the yocto-layer create script. I made a note of saying the
example does it by hand.
Also, in the menuconfig example. I updated the kernel version from
3.4 to 3.14. It was very old.
(From yocto-docs rev: 2696d4e45bccbb910c3d721e3f1d46d48309ee6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to "Adding a New Machine" and "Working With Libraries".
Minor corrections.
I did do a significant rewrite of the first two sections of the
"Adding a New Machine" section as it was very poor.
(From yocto-docs rev: 0a030e44f0f1bf2bb204f24b63b4ddfc0cde8252)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several items taken care of here. Of note are the retiring
of three BSPs (Chief River, N450, and sys9* stuff).
Also of note is that Kepler recommended version is now 4.3.2 and
not 4.3. The interface changed a bit as well in the section
for installing that stuff.
(From yocto-docs rev: 61bf82c1e68156d32a81e4c76dbb29db14665ffb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes are a result of a detailed read-through prior to
releasing YP 1.6. The changes are varied and random.
(From yocto-docs rev: 04c09abf96a04c3ffeea8cdf7be8e1bb1b9055c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure had a wrong box label in the right-bottom box.
I changed it to be like a local Git repository area as it should
be.
(From yocto-docs rev: 2963152decb2d3983180a0af9896e822c865f5cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did a read-through of this chapter in preparation for the YP
1.6 release. Found several little areas that needed attention.
(From yocto-docs rev: 73d56a4c948c675afd4cde0e3321a944a02013cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to add a cross-reference anchor tag to the term in Chapter
3 and then the link itself.
(From yocto-docs rev: 227c8ce85f4a8e81f14582cdc7c54b5b832d3aa0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed a few things as part of the read through prior to the
1.6 release. In particular, I added the link for the BitBake
User Manual, which is now published alongside the YP manuals.
(From yocto-docs rev: af779a5a70790d9c15584e1a463e1f0a5c79987f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5857]
I had missed replacing the release date in the manual revision
history tables for the 1.5.1 release. It was still an estimate.
I have replaced with the actual date of "January 2014"
(From yocto-docs rev: fb9abe0df33a9b551d797ac1b72577931f5f8ce6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5814]
I placed a brief note in the section where it talks about adding
a project to an Eclipse project that states you can't use special
characters in the project name.
(From yocto-docs rev: a03b5849394a6ca3a787b444d95fa49b9db36dd5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the description to match that which is used in the
WORKDIR variable.
(From yocto-docs rev: 7d9071c2bb99e7c3f3eeae9ddf0abc34563c6725)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording as it is described in the "Writing a New Recipe"
section.
(From yocto-docs rev: 88b039ccd0aa825220de091ea7225ada3d212553)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Final review comments from Paul Eggleton implemented here.
This should be it for the new section.
(From yocto-docs rev: 5307b471c73f46103e0a031172df3174c1880806)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are Paul Eggleton's fourth review change.
(From yocto-docs rev: 8470c1b516f7799148b4e2eae28534730e93b58b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed applying the revision comments from Paul Eggleton
for the third revision of this new section.
(From yocto-docs rev: d641aa6318cb87e9d41dda39cc4747c44888aa4d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented some third review feedback from Paul Eggleton.
(From yocto-docs rev: 3fd9c3cc4cf2aba876f0ad2ab36660ec32ea4c08)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to these sections, which are part of the
"Writing a New Recipe" section. Moved the Post-installation section
out of the examples area into its own, higher-level section as
it was not really an example. Other edits were direct result of
Paul Eggleton's review.
(From yocto-docs rev: c147a8bedf79d0be42d7b338e10b7e42d7c0b080)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to this section, which
is a part of the "Writing a New Recipe" section. Very minor
fix to remove a sentence that was somewhat isolated and unecessary.
(From yocto-docs rev: fd2a0eac1bc4b9e6af0bc8ce9a30802dbea35873)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some self-edits to this section that is part of the
"Writing a New Recipe" section. There was no feedback from the
second review but I noticed a few issues. Also, I added that
reference on how to add a post-installation script from the
"Enabling System Services" section as noted by Paul Eggleton.
(From yocto-docs rev: 6be835637cb1dc232d6d6dd1dfe1bc803efecfd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
