Similarlly to OE-Core rev 4b936cde58ca0a6f34092ce82640a02859110411 for
cross.sdk, BUILD_* flags can't be used as TARGET_* flags
gcc-crosssdk buils leaks config.log's through "gcc-stashed-builddir" and
TARGET_* flags to libgcc cross-build through "gcc/libgcc.mvars" file
on "gcc-stashed-builddir". This means that if BUILD_CFLAGS contains
host-specific flags like "-isystem/usr/include" libgcc build will
fail "do_qa_configure" and "do_package_qa" checks.
Remove host-related flags from TARGET_* flags for gcc-crosssdk builds.
[YOCTO #11874]
(From OE-Core rev: 6e162e619b6f5173c073cd9bedbcadf205017e30)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now go-cross is changing signatures when you change TUNE for a given
architecture. In particular this breaks layer tests like:
yocto-check-layer ../meta-yocto-bsp/ --machines qemuarm beaglebone-yocto
This changes the PN addtion to something containing the tune rather than
the arch which avoids these kinds of errors. If go-cross can be tune
independent that would be nice but currently that isn't the case.
[YOCTO #12586]
(From OE-Core rev: e3c7e1703499e6a5332d9ab8a941671ec8235c4f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once the value of SOURCE_DATE_EPOCH is determined, it is stored in the recipe's SDE_FILE.
If none of the existing mechanisms are suitable, replace the do_deploy_source_date_epoch task
with recipe-specific functionality to write the appropriate SOURCE_DATE_EPOCH into the SDE_FILE.
(From OE-Core rev: e7b891b76954c784f5a93bd0a1c91315673ce40d)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Meson uses 'ppc64' for 64 bit powerpc. Issue came up while
building systemd for MACHINE that uses ppc64e5500 tune.
(From OE-Core rev: eccd5414c37be26df63a90154c1808f6f5618b7d)
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Add MACHINE to the identifier
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
(From OE-Core rev: c272079d662237b1b9f87940c88cbadaeda9a9d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA sdk and sdkext need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
(From OE-Core rev: cdbedba7da9c3f97a642d79a5e8ec363ba938e35)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Log DISTRO
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
(From OE-Core rev: dda94cfa708cf3c6e5408d6dbcece360b4e8cd27)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA testimage need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
(From OE-Core rev: 5d135d4769b6bb60d575eb6ed196367f9e077cc4)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are both "curl" and "libcurl" CPEs in NVD.
All "curl" CVEs are currently missing in the reports.
Hence, switch "CVE_PRODUCT" to a space separated list.
It is useful for recipes generating several packages,
that have different product names in NVD.
(From OE-Core rev: 404f75e026393ddc55da87f6f04fb1201cff4e11)
Signed-off-by: Grygorii Tertychnyi <gtertych@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ptest has dependencies on other tests so contain them in a
variable. This allows layers to not worry about maintaining the depends
themselves.
(From OE-Core rev: c5c5ad9030ec7ddaa6387e2ba52e9e37b9ea76a2)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some distros want to install the kernel in a custom location other
than /boot and have it properly packaged, so it's useful to use a
weaker assignment.
(From OE-Core rev: cadd91655a336eb6d65ca43dc1231bbe5271e1cf)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit b1f10b18ea added the NPM_INSTALL_DEV
variable. But due to the use of simple assignment, a recipe can't override its
value.
(From OE-Core rev: b53d5094d5e05f9c1955c8565d777ad74f668f7e)
Signed-off-by: Jef Driesen <jef.driesen@niko.eu>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The node binary searches for packages in a number of locations, the last
of which is $PREFIX/lib/node (here: /usr/lib/node) from the list of
GLOBAL_FOLDERS [1]. So change the installation directory for all
packages depending on npm.bbclass to that location. This removes the
need to define the NODE_PATH variable to the non-standard
/usr/lib/node_modules value.
While the Tips for Package Managers [2] discusses installing packages to
/usr/lib/node_modules/<name>/<version>, this has several drawbacks:
* it does not work for the REPL as mentioned in the documentation
* it also does not work for any code _not_ installed as a global
package under /usr/lib/node_modules (e.g. /usr/share/foo.js will not
find any packages below /usr/lib)
* using the non-default location and then having to set NODE_PATH
barely saves any time: there are only two file-system lookups (to the
legacy $HOME/.node_modules and $HOME/.node_libraries) directories
before the library would be found
And the suggestion was made in the context of deduping the node_modules
tree by installing all packages in a flat hierarchy and using symlinks
to the correct version of each dependency. This is not what OpenEmbedded
does, so none of those benefits (deduping, cleaner packages) are being
had by shifting the installation directory to /usr/lib/node_modules.
The choice of a "proper" installation path is not helped by npm
installing to /usr/lib/node_modules if asked to install globally. Still,
using the location expected by nodejs (/usr/lib/node) seems the right
choice.
[1]: https://nodejs.org/api/modules.html#modules_loading_from_the_global_folders
[2]: https://nodejs.org/api/modules.html#modules_addenda_package_manager_tips
(From OE-Core rev: c73bc49038effd64f2c2542c1f4da8b6a4168477)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The node binary searches for packages in a number of locations, the last
of which is $PREFIX/lib/node (here: /usr/lib/node) from the list of
GLOBAL_FOLDERS [1]. Change the installation directory for all packages
depending on npm.bbclass to that location. This removes the need to
define the NODE_PATH variable to the non-standard /usr/lib/node_modules
value.
While the Tips for Package Managers [2] discusses installing packages to
/usr/lib/node_modules/<name>/<version>, this has several drawbacks:
* it does not work for the REPL as mentioned in the documentation
* it also does not work for any code _not_ installed as a global
package under /usr/lib/node_modules (e.g. /usr/share/foo.js will not
find any packages below /usr/lib)
* using the non-default location and then having to set NODE_PATH
barely saves any time: there are only two file-system lookups (to the
legacy $HOME/.node_modules and $HOME/.node_libraries) directories
before the library would be found
And the suggestion was made in the context of deduping the node_modules
tree by installing all packages in a flat hierarchy and using symlinks
to the correct version of each dependency. This is not what OpenEmbedded
does, so none of those benefits (deduping, cleaner packages) are being
had by shifting the installation directory to /usr/lib/node_modules.
[1]: https://nodejs.org/api/modules.html#modules_loading_from_the_global_folders
[2]: https://nodejs.org/api/modules.html#modules_addenda_package_manager_tips
(From OE-Core rev: 2036137151929b541293154ff529475071cd92b0)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For conditonally applied patches based on SRC_URI overrides, the
devtool-source class would try to create a new branch for each override
assignment as a postfunc to do_patch, but if the same override was used
multiple times, it would try to create the same branch multiple times,
causing errors like
> Exception: bb.process.ExecutionError: Execution of
\ 'git checkout f0f0f0f0f0ff0f0f0f0f0f0f0f0f0f0f0ff0f0f0 -b devtool-override-foo'
\ failed with exit code 128:
> fatal: A branch named 'devtool-override-foo' already exists.
This change makes sure that the devtool-source bbclass will only create
one branch per override.
(From OE-Core rev: 95a921959d340f74b5604df57737c1eeaad0023e)
Signed-off-by: Olof Johansson <olofjn@axis.com>
Reviewed-by: Peter Kjellerstedt <pkj@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The __pycache__ is created based on python3 version in the build machine
and isn't a garantee to be useful on the system that runs exported tests.
(From OE-Core rev: 405e822e9da4b53ec9ee8019364fdcb13ccc2587)
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Static libraries are not included in rootfs, it means, that sources are
not going into debug rootfs. This option enables to install additional
packages even if the standard package is not installed.
(From OE-Core rev: 708fe1df3d3e22dd693ae7bbfdd3e5af1a1b0bdc)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add -f into postinst OPT to fix run postinst scriptlet fail
problem during do rootfs, while INITSCRIPT_PARAMS set to remove.
+ type update-rc.d
+ '[' -n qemux86_64-poky-linux/core-image-sato/1.0-r0/rootfs ']'
+ OPT='-r qemux86_64-poky-linux/core-image-sato/1.0-r0/rootfs'
+ update-rc.d -r work/qemux86_64-poky-linux/core-image-sato/1.0-r0/rootfs keepalived remove
update-rc.d: work/qemux86_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/init.d/keepalived exists during rc.d purge (use -f to force)
D: %post(keepalived-1.4.2-r0.core2_64): waitpid(305974) rc 305974 status 100
(From OE-Core rev: 45224526edbe65012a846c066d2b539a360f0c51)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit [9524330 gobject-introspection: fix multilib install
file conflicts] applied in oe-core, while multilib enabled, gir
files will be installed to `${libdir}'.
Refer above commit, modify gobject-introspection.bbclass to
split gir to package correctly.
(From OE-Core rev: e0cc1dc6f1c14babe29a29a7211dc1c69d782b95)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the name of the last user being part of the group had a name that
was a prefix of the user being added, then perform_groupmems() would
treat it as if the user already existed in the list of users and not
add it.
Reported-by: Peter Henricsson <peter.henricsson@axis.com>
(From OE-Core rev: 3bab0416f20366e75444be9b65fb1369643f103a)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit d297f7ebf3f6 [fribidi: use Meson instead of autotools]
build failures have been observed with this package. The immediate
issue was related to improperly named #defines per
https://github.com/fribidi/fribidi/commit/46f52d588ab5, however, the
root cause was FRIBIDI_SIZEOF_INT getting a value of "-1".
After searching the meson logs the following was found:
Could not run: /tmp/tmp2fxe6ha1/output.exe (error: [Errno 13] Permission denied)
Checking for size of "int": -1
Which pointed to the real root cause being /tmp mounted with noexec, a
common configuration on Redhat and other distros. This issues has been
raised in the meson community:
https://github.com/mesonbuild/meson/issues/2972 but is yet to be
addressed.
Using the discussion from issue#2972 and the fact that the underlying
code makes use of python 'tempfile' we can simply create a 'tmp'
directory and make use of TMPDIR to avoid this issue.
(From OE-Core rev: 9800daf59d2235bc492d1aeb600e46ad62303510)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently only the dnf package manager tests are automatically added to the
list of tests to run. Improve the code to handle automatic addition of
the apt and opkg tests too.
(From OE-Core rev: c9169e4d1fa67289d5beb0e1f8fb5c54153c4242)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the opkg/apt tests are run without a package-index they will fail.
Trigger this here for now as a dependency until the code can be improved.
(From OE-Core rev: 7805eec0f522da2d2b6a08c8a07a9243e26c014a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current qemuall override overwrites other dependencies unintentionally.
Tweak the code to avoid this by appending to the variable.
(From OE-Core rev: fc8df45e6b27dd7a26b7bf88a06ffa831fcf075c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Append '\n' to the non-empty formatted string before return. If you
write it to the (manifest) file, it will ensure file ends with a newline.
Many GNU utilities have problems processing the last line of a file
if it is not '\n' terminated. E.g. if the last line is not terminated
by a newline character, then "read" will read it but return false,
leaving the broken partial line in the read variable(s).
It can also break or adversely affect some text processing tools,
that operate on the file.
(From OE-Core rev: ee4d0c879713ba50dc6cc3300f44647faebee2e0)
Signed-off-by: grygorii tertychnyi <gtertych@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let users to use custom toolchain template files instead of overloading
the whole function.
(From OE-Core rev: d4d5fdadaf2f671559326ab594fb596995846ca4)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure that we don't create images that have QA problems with their
package files by adding do_package_qa to do_rootfs[recrdeptask].
(From OE-Core rev: 4ee2f87f0c9540c7e2c866dbc9739e21a618bddf)
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_DONT_CACHE was not set for non-virtual recipes where PN != BPN, such
as quilt-native. Recipes that do not set BBCLASSEXTEND should always
have BB_DONT_CACHE set by externalsrc.
(From OE-Core rev: 4eff427a0ee629a1541a420a9591411648569a97)
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When in configured mode the archive will re-run configure itself, but that
doesn't work if there are other tasks that need to run such as cmake's
generate_toolchain_file.
Instead of hard-coding a list of classes and tasks, obtain the list of tasks
preceeding do_configure, filter out ones we don't want to re-run such as
do_patch and do_prepare_recipe_sysroot, and run those too.
(From OE-Core rev: fe26382f94d8cb7d2453d9937aee451b757252b8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some recipes don't have do_configure, or have them but are marked as noexec.
Check for their existance before hooking up dependencies.
[ YOCTO #12868 ]
(From OE-Core rev: 5c8aa1f41f04519a8ba3997c0d8e3a71fe270fae)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't make much sense to expand them to multilib, and there is an error on
qemuarm64 since grub-efi supports arm64, but doesn't support armv7a or armv7ve:
* Fixed:
MACHINE = "qemuarm64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "armv7a"
MACHINE_FEATURES_append = " efi"
$ bitbake lib32-core-image-minimal
Also introduced a variable NON_MULTILIB_RECIPES in multilib.conf, so that we
can easily add other recipes, such as syslinux if needed.
(From OE-Core rev: 25f7c6c329038b443d36074fff45a30ba3712f7a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lib32-packagegroup-anaconda-support have RDEPENDS to kernel-image,
but kernel-image don't have lib32, so skip it.
ERROR: QA Issue: lib32-packagegroup-anaconda-support package
lib32-packagegroup-anaconda-support - suspicious values 'kernel-image'
in RDEPENDS [multilib]
(From OE-Core rev: 24b8c61bf7dd13f7f371d3a910947a1fac062c6b)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For now, the RECIPE_SYSROOT of nativesdk recipes is ${WORKDIR}/recipe-sysroot
if multilib is disabled and ${WORKDIR}/nativesdk-recipe-sysroot if multilib
is enabled. And it's causing chaos. Problems I've met include:
1) 'File Exists' error when doing extend_recipe_sysroot
2) Rebuilding failure about cmake based nativesdk recipes if toggling multilib
In nativesdk.bbclass, We've set MULTILIBS to be "", and we've changed MLPREFIX
to be 'nativesdk-', I think we should also set consistent RECIPE_SYSROOT to be
${WORKDIR}/recipe-sysroot.
Below is an example showing why previous settings will cause do_prepare_recipe_sysroot
failure.
e.g.
A -> C
B -> C
A's RECIPE_SYSROOT is .../recipe-sysroot and B's RECIPE_SYSROOT is
.../nativesdk-recipe-sysroot.
As extend_recipe_sysroot function uses shared manifest, i.e., the same
manifest of C for both A and B, then there must be one of them having
the wrong manifest. And the wrong manifest results in RECIPE_SYSROOT
not cleaned up before installing new components, thus the following error.
Exception: FileExistsError: [Errno 17] File exists: xxx -> xxx
This happens when toggling multilib and also between nativesdk recipes and
crosssdk, cross-canadian recipes. The latter situation also explains
why choosing ${WORKDIR}/recipe-sysroot instead of ${WORKDIR}/nativesdk-recipe-sysroot.
If we use 'nativesdk-recipe-sysroot', we still need to modify the extend_recipe_sysroot
function to treat crosssdk and cross-canadian as special cases. Using
'recipe-sysroot' does not have this problem.
(From OE-Core rev: 665934a506cc560bfbc469f5ed095e7d54e353a5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a function siteinfo_data_for_machine to look up the data for any arch/os
pair, not just HOST_ARCH-HOST_OS.
(From OE-Core rev: 7429ed8d2a6e48cb3415113ef62348ae211aa189)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the goal of autoconf-compatibility Meson respects $CFLAGS et al in builds.
In cross-compiled build the cross file is the one true source of flags and the
environment isn't used, but in a native build the environment will still be
respected.
As this can lead to target flags being used in the build for native binaries
(including a single native binary inside a target recipe), export
CFLAGS=${BUILD_CFLAGS) et al.
(From OE-Core rev: 4ca0002860dca771836c0ce1c7a92b79a5f2db3f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Meson doesn't care for the value of the endian field, but packages may want to
use it and Meson master now validates the value.
Use siteinfo to obtain the endianism and write the correct value.
(From OE-Core rev: 2f9adf05efdddf8dae9c58976ae56cf32d9e57f0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During deploy we iterate over KERNEL_IMAGETYPES twice, with no consumer
of our changes in the interim. Collapse these two loops into one.
(From OE-Core rev: 8d3139640ed4cd4e196dc2d1f6ae02d612fb9564)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When usrmerge is enabled the kernel modules aren't under /lib, but /usr/lib;
ensure we fetch the modules from the correct location so we don't have a
tarball which consists of a single symlink.
(From OE-Core rev: 62d2d7d12dda69d6019a1a2d5492450487e41bfd)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When deploying the its file, the target of the symlink is missing the its
extension, add it here.
(From OE-Core rev: df72761760d453b2dfc7cc2fa1344bb016df9712)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 65cded55fa96b1ba72149a31689c081ac27af7f7.
The fitImage deployed here is the one generated in kernel-fitimage.bbclass,
whereas the one deployed by kernel-fitimage.bbclass is a raw image, so we
need the one deployed here keeping.
(From OE-Core rev: 798d2acc0141b13da7ddd18875a417b2df9d57b3)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
u-boot-mkimage-native is needed to build any type of uImages, be it
the uImage target itself or for example uImage.lzma. The dependency
however gets only added when at least one of KERNEL_IMAGETYPE and
KERNEL_ALT_IMAGETYPE is exactly uImage. Building uImage.bin and uImage.lzma is
not possible this way.
This patch adds a dependency to u-boot-mkimage-native for all imagetypes which
contains the string uImage.
(From OE-Core rev: ac4ce0b07b2742c64d44f988ecb27e7200b5a0bc)
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the basic architecture site info targets for the LatticeMico32
architecture. This architecture does not target Linux.
(From OE-Core rev: 216f8ea907c8ac7e580e33dcbd12c0f30608bf74)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
