There was one failure occurring in rust testing for qemuriscv64. Exclude
that test so we can enable in automated testing.
(From OE-Core rev: a7f6ea5b20aa91e4a1b00dbea7a6447effb9220d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, pseudo tracks all files referenced within its presence unless
they're listed in an exclusion list. The exclusion list has grown to be
fairly unwieldy.
This patch swaps PSEUDO_IGNORE_PATHS for PSEUDO_INCLUDE_PATHS which in
theory should be easier and more explicit to maintain.
This change does drop many directories from pseudo coverage including
/home and /tmp. There may be adapatations needed for recipes/classes
using pseudo in specific ways.
(From OE-Core rev: 2502da81709f25de499277b28d33c915638c45f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Search config.log for the correct host_alias assignment to verify that
configure has correctly identified the host system.
(From OE-Core rev: ade66073a1c89918f849eb2932c05342e8f3ab4f)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to copy files inside setUpClass() when there's only one
test function that uses it. Just do all of the test inside the test.
(From OE-Core rev: 5474677b21f2f4069f355abdc600483c42d0b0b3)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test assumed that maturin would only find a single Python binary, in
/usr/bin/python3*.
However in eSDKs with buildtools a Python is shipped with the SDK, so
the test failed.
Generalise the test so that it runs python3 and obtains its path and
version, and then verifies that path and and version are found by
Maturin. This means we're not assuming a single Python, or the paths, or
that the Python is CPython.
(From OE-Core rev: ae9b5dae77ef140422fcf71d239ca028c9208447)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use 'meson introspect' to dump JSON describing the build configuration
and validate that the target architectures and cross-compiler is
correctly set.
(From OE-Core rev: 1c84361829921e91d782b189e2bde818a2d1491c)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
galculator hasn't been touched for a decade now[1] and fails to compile
under GCC 15.
Switch to building libhandy, which is the GTK+3 precursor to libadwaita
in the Gnome stack. Whilst this is in low-maintainence mode, will be
updated if it breaks.
[1] https://github.com/galculator/galculator/
(From OE-Core rev: ff6fa71eb0511d8594c4416a37d75a85470ff9c6)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor this test case so the generic "build a meson project" code is
separated out and can be reused.
Also currently meson inside eSDKs only works with fully populated eSDKs,
but our testing uses minimal eSDKS, so skip the test if the eSDK is a
minimal build. A bug has been filed to resolve this.
(From OE-Core rev: 575e0bf52db0467d88af4b5fe467b682f10ca62a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the moment we can't run this test inside an eSDK as it needs the
kernel-devsrc recipe to be present. Skip the test until this has been
resolved.
(From OE-Core rev: f83beee6e63d25ef2b17618a85f9ad6ca0898600)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up lots of dependency checking code by using the new helpers.
This means that a lot of tests that were previously skipped inside the
eSDK testing on the autobuilder are now executed, and fail.
(From OE-Core rev: 11277efd057685558a744e98082b5709e849dd2a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing tests simply look at the manifest to determine if a test
should be ran or not based on dependencies. Whilst this works for
Traditional SDKs, it fails for Extensible SDKs if they've been built in
minimal mode, where the manifest will be empty. However, minimal eSDKs
might well have available sstate to install the missing dependencies.
Add a pair of helper functions to ensure that a package is available, or
skip the test. This handles nativesdk- vs -native (SDK vs eSDK) and
will try to sdk-install missing dependencies into an eSDK if they're not
already installed.
(From OE-Core rev: d0e8b83d05957b1f22d08582e364afa4b522801e)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test that builds a SDK with specific packages in the host and
target sections, and verifies that they're listed in the manifest.
(From OE-Core rev: a1556c801feb56b79243ba2947b74b84f674072b)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simple test to sanity check that the generated SDK manifest was parsed
correctly and isn't empty.
This test is complicated by the fact that minimal eSDKs without a
toolchain do in fact have an empty manifest, so also check for that.
(From OE-Core rev: 43288b19e93f0c07b347d6e5d6f7f10e96219f96)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This subclass overrides hasHostPackage() but back in 2018[1] the parent
class's method gained a regex argument.
[1] oe-core 595e9922cdb ("oeqa/sdk: fixes related to hasPackage semantics")
(From OE-Core rev: cfd1e0a8c8d294510fca1a800ab27e4f1e2292bf)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hasTargetPackage has some logic to automatically multilibify package
names if needed (for example, so that gtk+3 becomes lib32-gtk+3).
Due to a logic bug if multilib was True but there were no multilibs
configured then this prepended "-" to the package name, which won't
exist. This resulted in tests being skipped as the dependent packages
are not installed.
Solve this by only prepending to the package name if requested and if a
multilib environment has been detected.
(From OE-Core rev: 2abb146dd81f677176923ebb3188f5b7c034ed68)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Following the usage of TEST_SUITES in testimage, add TESTSDK_SUITES to
specify the list of tests to execute. By default the variable is empty,
which means to run all discovered tests.
This makes it easier to work on a single test without having to run all
of the tests.
(From OE-Core rev: 28d437c52c77889b2ede0fc2f2d6777c5b0a553d)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test recipe git repo URL is checked for newer commits and
mtd-utils-selftest check is sometimes failing due to server
errors. Use pseudo which uses Yocto Project in git servers
which should be reliable.
Fixes: [YOCTO #15855]
build/build-st-17692/tmp/hosttools"; export HOME="/srv/pokybuild"; git -c gc.autoDetach=false -c core.pager=cat -c safe.bareRepository=all -c clone.defaultRemoteName=origin ls-remote git://git.infradead.org/mtd-utils.git failed with exit code 128, output:
fatal: read error: Connection reset by peer
(From meta-yocto rev: a82be5486058c2e5a1e286dba17c33444889c982)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All qemu machines have ext4 in IMAGE_FSTYPES which makes
native mkfs.ext4 available at wic image build time.
genericarm64 defaults to only wic in IMAGE_FSTYPES
and this test was failing:
| DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing python function set_image_size
| DEBUG: 148548.400000 = 114268 * 1.300000
| DEBUG: 652644.400000 = max(148548.400000, 8192)[148548.400000] + 504096
| DEBUG: 652645.000000 = int(652644.400000)
| DEBUG: 652645 = aligned(652645)
| DEBUG: returning 652645
| DEBUG: Python function set_image_size finished
| DEBUG: Executing shell function do_image_wic
| INFO: Creating image(s)...
|
| ERROR: A native program mkfs.ext4 required to build the image was not found (see details above).
|
| Please make sure wic-tools have e2fsprogs-native in its DEPENDS, build it with 'bitbake wic-tools' and try again.
|
| WARNING: exit code 1 from a shell command.
NOTE: recipe core-image-minimal-1.0-r0: task do_image_wic: Failed
(From OE-Core rev: 59b5ec3d53058237dc6f3e85385851d1a8a97f97)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test is failing on genericarm64 which includes all kernel
modules on rootfs by default. Recently added kernel modules
triggered the size limits to be exceeded. Fixes:
ERROR: Actual rootfs size (112884 kB) is larger than allowed size 102400 kB
Doubling the size to avoid issues like this on machines which
may include a lot of packages on default images. Size of the
rootfs does not matter for the test, only that the offsets are
correct in various usecases.
(From OE-Core rev: 1ff542318ea66514ef550d4817ba9b2ef688134c)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic test_exclude_path_with_extra_space does not succeed on debian-based
AB workers since they, by default, do not install the 'parted' utility. This
test installs the 'wic-tools' package, which includes the 'parted' utility,
but it is not being found/used for some unknown reason.
In the previous patch it was believed that doing some extra PATH handling
(as performed by some other tests with a python try...finally block) would
solve the issue. That turned out to not be the case. This patch starts by
reverting that change, since it has no benefit.
In order to use the native tools from the 'wic-tools' package, wic's
'--native-sysroot' can be used (as demonstrated in other tests). In fact
the wic help message explaining the purpose of this flag states that it is
for passing "...the path to the native sysroot containing the tools(parted
and mtools) to use"[sic].
Removing the host's 'parted' utility better simulates the situation found
on the debian workers for testing. This patch is seen to make this test pass
with no host 'parted' utility in place.
(From OE-Core rev: 306e4831f07d4a8db6ab880487813a6abd0ffa08)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Older versions do not compile with GCC 15. We had different versions to test
GPLv3 exclusion.
1.21 compiles with gcc 15 and 1.20.2 has a CFLAGS tweak to allow it to work
with gcc 15 too.
1.21 is licensed under GPL-2.0 so we need to rework some of the tests.
Tweak the gplv3 test by adding a special override of LICENSE to then test
the license exclusion code.
Modify the archiver selftests to use the new version.
Based on a patch from Khem Raj <raj.khem@gmail.com>
(From OE-Core rev: 3b17355ad1ecad17d12c5eb0e6403a59ef11f7d7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic test_exclude_path_with_extra_space test succeeds on non-debian AB
workers. Add PATH handling so parted from the wic-tools can be found on
debian-based AB workers.
Fixes [YOCTO #15838]
(From OE-Core rev: 3994e727f10c5a0143d52bdd6e1d9ca037296d59)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the test whitespace to avoid bitbake warnings.
(From OE-Core rev: 8a324aa2111872138715bde7fbc86bcfc2d8b20e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the *.wks file contains a "--source rootfs" then
lib/wic/plugins/source/rootfs.py will be invoked to generate (what is assumed
to be) the rootfs partition. If the rootfs partition needs to be tweaked or
modified, the "rootfs.py" plugin will make a copy of the filesystem and then
perform the changes on that copy. In other words, if the "--source rootfs"
line of the *.wks file also contains any of:
--exclude-path
--include-path
--change-directory
--use-label (i.e. modify etc/fstab)
then the rootfs will be copied first, then the copy is modified.
If, for example, the unmodified IMAGE_ROOTFS is:
.../tmp/work/qemuarm64_secureboot-oe-linux/core-image-base/1.0/rootfs
then the copy would be made at:
.../tmp/work/qemuarm64_secureboot-oe-linux/core-image-base/1.0/tmp-wic/rootfs${LINENO}
where ${LINENO} is the line number where this "--source rootfs" line appears
in the *wks file.
When it comes time to make an actual partition of a specific filesystem type,
lib/wic/partition.py::prepare_rootfs() is called. It is in this function that
wic figures out if any extra size needs to be added. The bitbake variable used
to specify the ultimate rootfs size is ROOTFS_SIZE, and since this variable is
only valid for the rootfs (and not any other partitions), the code also
verifies that the partition being created is ${IMAGE_ROOTFS}:
rsize_bb = get_bitbake_var('ROOTFS_SIZE')
rdir = get_bitbake_var('IMAGE_ROOTFS')
if rsize_bb and rdir == rootfs_dir:
<use rsize_bb>
else:
<calculate the partition size using "du -ks $p">
As noted above, if lib/wic/plugins/source/rootfs.py has made a copy, then the
"rdir == rootfs_dir" clause will fail and the code will assume this partition
is not a rootfs since the strings do not compare equal.
Therefore, in order to determine if this is a rootfs, retain the existing
"rdir == rootfs_dir" comparison, but also add another one to check whether or
not this is a wic-generated copy of the rootfs.
STEPS TO REPRODUCE:
- start with the following *wks file:
bootloader --ptable gpt
part /boot --size=100M --active --fstype=ext4 --label boot
part / --source rootfs --fstype=ext4 --label root
- and the following extra variable in conf/local.conf:
IMAGE_ROOTFS_EXTRA_SPACE = "500000"
- build an image
- run it in qemu
$ runqemu slirp nographic serial
- verify the root partition has extra space:
root@qemuarm64-secureboot:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 721.5M 67.4M 600.6M 10% /
devtmpfs 477.7M 0 477.7M 0% /dev
tmpfs 40.0K 0 40.0K 0% /mnt
tmpfs 489.3M 92.0K 489.2M 0% /run
tmpfs 489.3M 68.0K 489.2M 0% /var/volatile
/dev/vda1 120.4M 19.9M 91.4M 18% /boot
- modify the "/" line of the *wks file to be:
part / --source rootfs --fstype=ext4 --label root --exclude-path boot/
- build image
when it fails:
root@qemuarm64-secureboot:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 73.4M 41.9M 25.8M 62% /
devtmpfs 477.7M 0 477.7M 0% /dev
tmpfs 40.0K 0 40.0K 0% /mnt
tmpfs 489.3M 92.0K 489.2M 0% /run
tmpfs 489.3M 68.0K 489.2M 0% /var/volatile
/dev/vda1 120.4M 19.9M 91.4M 18% /boot
after this fix:
root@qemuarm64-secureboot:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 721.5M 47.4M 620.6M 7% /
devtmpfs 477.7M 0 477.7M 0% /dev
tmpfs 40.0K 0 40.0K 0% /mnt
tmpfs 489.3M 92.0K 489.2M 0% /run
tmpfs 489.3M 68.0K 489.2M 0% /var/volatile
/dev/vda1 120.4M 19.9M 91.4M 18% /boot
Doing the math we see that the /boot partition is ~20MB and in the first image
the / partition contains this ~20MB in addition to the rest of the rootfs.
This ~20MB is completely wasted since it is used in the / partition, but then
the /boot partition is mounted on top of it, making the /boot directory of /
inaccessible. After the fix the / partition has an additional ~20MB since the
/boot portion is excluded.
Fixes [YOCTO #15555]
(From OE-Core rev: 1c690aa046ebca13d7b29de50d42b5d8a4a8486c)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream has released a new version (4.4) but not the tarball for it.
Adjust one of the devtool selftests, as it requires that the recipe
under test is using a tarball. Another selftest also needs to be
tweaked to correctly clean up its modifications to that same recipe on
test completion.
(From OE-Core rev: de635a9bc0392689ff36b50e7f91572d3fbaac09)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base-files test for SPDX 2.2 did not give good coverage, since
base-files doesn't have any dependencies. Add building tar as another
test which more fully exercises the code
(From OE-Core rev: d678e25419c89e09c1c438363bf3a940ce903d43)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cpio is not yet buildable with C23 standard which is default with
GCC 15, therefore ensure to apply needed bandage to keep it compiling
in C17 mode even with GCC 15
(From OE-Core rev: 0c637099887f1be421c8e1203f99631a1e040150)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running, e.g., `devtool reset sdbus-c++` would result in the following
error:
re.error: multiple repeat at position 35
This was due to the ++ in the recipe name, which would be treated as an
incorrect regular expression in _reset().
Use re.escape() to make sure all characters in the recipe name are
treated literally.
(From OE-Core rev: 6e73bd9b3e6d529752db93879f2c0ed53873dd1a)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new test function which checks that the device-tree of U-Boot
contains the public keys which are required for checking the signature
of the kernel FIT image at run-time.
Use this new _check_kernel_dtb function in the existing
test_sign_cascaded_uboot_fit_image test case which already creates a
build configuration with UBOOT_SIGN_ENABLE = "1" and keys for the kernel.
But so far there was no check that the keys for the kernel verification
got added to U-Boot's DTB.
This test case checks the configuration where only the configuration
nodes of the kernel FIT image are signed.
A new test case test_sign_uboot_kernel_individual checks the
configuration with two keys and signed image and signed configuration
nodes.
This test case covers the use case which recently broke with commit:
OE-Core rev: 259bfa86f384206f0d0a96a5b84887186c5f689e
u-boot: kernel-fitimage: Fix dependency loop if
UBOOT_SIGN_ENABLE and UBOOT_ENV enabled
and got fixed with commit
OE-Core rev: 0106e5efab99c8016836a2ab71e2327ce58a9a9d
u-boot: kernel-fitimage: Restore FIT_SIGN_INDIVIDUAL="1"
behavior
This patch also fixes a few more details:
- Simplify the code by moving all the U-Boot related variables to the
_fit_get_bb_vars function.
- Do not set FIT_GENERATE_KEYS = "1" without inheriting the
kernel-fitimage.bbclass which handles this variable.
(From OE-Core rev: dda1fcbc85c26d1851dda6ed235238b15939998e)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the code slightly more robust by using e.g.
bb_vars.get('UBOOT_SIGN_ENABLE') instead of bb_vars['UBOOT_SIGN_ENABLE']
for variables which are potentially undefined.
This is a general cleanup but also a preparation for additional test
cases.
Log bb_vars in verbose mode.
Drop one no longer used log message.
(From OE-Core rev: 22a554e1d5a2449c4c1b34f4d5cfe1572a72a142)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The updated kmod build (using meson) causes the output which results from `info
line kmod_help` to change. Relax the regex so that both old and new reponses
will pass.
(From OE-Core rev: 8783e7b8109b02847cf3b07421582c4fdb18949c)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Test with only one externally provided ssh key not only with two
keys generated by the kernel-fitimage.bbclass itself.
* Add a test which signs only the configuration but not the image nodes.
There was no test case which covered the probably much more important
use case of setting FIT_SIGN_INDIVIDUAL = "0".
* Cover also the unbundled initramfs use case. Also this use case is
probably much more relevant than the bundled initramnfs use case.
(From OE-Core rev: 0a5b65b83dcd9f8d1d22d074fdfad1f1e472827c)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a comprehensive cleanup of the fitImage related test cases.
The existing test cases were essentially the same code copied and pasted
9 times. All 9 test cases contained the code to parse an its file and to
parse the output of the dumpimage utility in slightly different variants.
Changing the kernel-fitimage.bbclass or the uboot-sign.bbclass would mean
changing 9 test cases individually. This is no longer maintainable.
This cleanup converts the code into reusable functions. The new test
code is more like a reverse implementation of the bbclasses to be tested
than a collection of straightforward test sequences.
This also means that the test code evaluates the same bitbake variables
as the implementation. This makes it much easier to add new test cases,
as a test case is basically just another local.conf file. The code is
not yet complete. But it can now be improved step by step in this
direction.
(From OE-Core rev: 1dfa03a182d9d9e9e38c410847c7dac4ed7e8ce6)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a trivial refactoring.
The goal is to have all tests for kernel-fitimage.bbclass and all tests
for uboot-sign.bbclass together. This refactoring greatly simplifies
the diff of the next commit.
(From OE-Core rev: 638abab58b653a1fb120368bd5e30bc80478757c)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For u-boot test cases (bitbake virtual/bootloader) inheriting the
kernel-fitimage.bbclass is no longer needed. Also setting any variable
which is evaluated by the kernel-fitimage.bbclass but not by
uboot-sign.bbclass is pointless since:
* Commit OE-Core rev: 5e12dc911d0c541f43aa6d0c046fb87e8b7c1f7e
changed the test case from
bitbake virtual/kernel
to
bitbake virtual/bootloader
* Commit OE-Core rev: 259bfa86f384206f0d0a96a5b84887186c5f689e has
finally removed the dependency of uboot-sign.bbclass on the
kernel-fitimage.bbclass completely.
Remove the related lines of code which are now without any effect.
The two test cases test_uboot_fit_image and test_uboot_sign_fit_image
do the exact same test. Both generate a binary equal its file:
/dts-v1/;
/ {
description = "A model description";
#address-cells = <1>;
images {
uboot {
description = "U-Boot image";
data = /incbin/("u-boot-nodtb.bin");
type = "standalone";
os = "u-boot";
arch = "arm";
compression = "none";
load = <0x80080000>;
entry = <0x80080000>;
};
fdt {
description = "U-Boot FDT";
data = /incbin/("u-boot.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
};
};
configurations {
default = "conf";
conf {
description = "Boot with signed U-Boot FIT";
loadables = "uboot";
fdt = "fdt";
};
};
};
The code diff between the two equal test cases looks like:
@@ -1,8 +1,9 @@
- def test_uboot_fit_image(self):
+ def test_uboot_sign_fit_image(self):
"""
Summary: Check if Uboot FIT image and Image Tree Source
(its) are built and the Image Tree Source has the
- correct fields.
+ correct fields, in the scenario where the Kernel
+ is also creating/signing it's fitImage.
Expected: 1. u-boot-fitImage and u-boot-its can be built
2. The type, load address, entrypoint address and
default values of U-boot image are correct in the
@@ -26,16 +27,15 @@
UBOOT_LOADADDRESS = "0x80080000"
UBOOT_ENTRYPOINT = "0x80080000"
UBOOT_FIT_DESC = "A model description"
-
-# Enable creation of Kernel fitImage
KERNEL_IMAGETYPES += " fitImage "
-KERNEL_CLASSES = " kernel-fitimage"
+KERNEL_CLASSES = " kernel-fitimage "
UBOOT_SIGN_ENABLE = "1"
FIT_GENERATE_KEYS = "1"
UBOOT_SIGN_KEYDIR = "${TOPDIR}/signing-keys"
UBOOT_SIGN_IMG_KEYNAME = "img-oe-selftest"
UBOOT_SIGN_KEYNAME = "cfg-oe-selftest"
FIT_SIGN_INDIVIDUAL = "1"
+UBOOT_MKIMAGE_SIGN_ARGS = "-c 'a smart U-Boot comment'"
"""
self.write_config(config)
Conclusion: The test case test_uboot_sign_fit_image looks redundant.
Contrary to its name, it does not insert any signature nodes into the
its-file and therefore does not test any type of signature.
Code history:
- Commit OE-Core rev: e71e4c617568496ae3bd6bb678f97b4f73cb43d8
introduces both test cases.
- Commit OE-Core rev: 5e12dc911d0c541f43aa6d0c046fb87e8b7c1f7e
changes both test cases like this:
- bitbake("virtual/kernel")
+ bitbake("virtual/bootloader")
It looks like the original implementation of test_uboot_sign_fit_image
was supposed to test the interaction between the kernel-fitimage.bbclass
and uboot-sign.bbclass which does not longer work like that.
When compiling u-boot, the variable that is relevant for creating an its
file with signature nodes is: SPL_SIGN_ENABLE. This is what the test
case test_sign_standalone_uboot_fit_image verifies. Lets just delete the
now obsolete test_uboot_sign_fit_image test case.
(From OE-Core rev: de8bfdff0f997f59a2bd27842a2ffcd365f725f3)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you send this forked process a SIGTERM, it will execute all of the
parent's exit code leading to two sets of console/exit output which is
extremely confusing. Wrap the code in a try/finally to ensure we always
call os._exit() to avoid this.
I spent far too long trying to work out the crazy console output from this.
(From OE-Core rev: 652e40bfae24b8e23bbf7a7f35d900d2ab8d0f92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "test_uboot_atf_tee_fit_image" test caste to check u-boot FIT image and
Image Tree Source(ITS) are built and the ITS has the correct fields.
Add "test_sign_standalone_uboot_atf_tee_fit_image" test case to check if u-boot
FIT image and Image Tree Source (ITS) are created and signed correctly for the
scenario where only the u-boot proper fitImage is being created and signed.
Currently, ATF and TEE(optee-os) recipes are placed in meta-arm layer.
OpenEmbedded-Core is a basic and core meta layer. To avoid OpenEmbedded-core
depends meta-arm, both test cases are used dummy images for testing.
(From OE-Core rev: 92e51452f8831f74e0907b960135eef8cecd012a)
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few tests are getting failed with x86 arch.The unsupported/failing tests
are added to the exclude list and ignore the failing unit tests.
Upstream-Status: Pending
(From OE-Core rev: b1340173be2a3a91fbb135eb0e24e50c3b996425)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ifconfig is obsolete and being removed, convert to use ip instead.
(From OE-Core rev: 3b2fb477750606976359884b18c33a37832e5a78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tests don't need it. On top of that, this extra requirement
creates a dependency loop between systemd-systemctl-native and util-linux.
(From OE-Core rev: b5770d8c56036bdfef8d596d27433d8f408ee36f)
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test checks for an IP address and then tests if interface aliases work. We
don't run it on any of our automated testing as it only applies for non-qemu.
The connectivity test is unrealted to connman and pretty pointless as it depends
on ssh being working, so networking is probably ok.
The alias interface test is unrelated to commman and a general networking test
but seems out of place.
The code uses obsolete ifconfig calls and overall, the value of the test we're
never using seems low. Delete it.
(From OE-Core rev: 5e40277d1ee9df8dbc612a39b575f9a50806cd62)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With all the pieces in place, the self test can be re-enabled.
(From OE-Core rev: 46e8b94582ea9734117d20cd62c39fb4450c00c4)
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If networking fails, we can get useful informaiton over the serial connection. Add
this fallback code so that any issues can be more easily debugged by showing the
host and target networking states.
(From OE-Core rev: 3291f9d07ecfe7d3301dc914f5e6a80577cf1d5d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
