There's no need to have multiple overrides for this, as BBCLASSEXTEND
will automatically map the dependencies as needed.
(From OE-Core rev: ffa699332551fbbb95a0e388385667dc2706da6a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This dependency has always existed in the oe-core recipes but isn't
explicitly needed here: the host Python is sufficient.
Note that rust-common still inherits on python3native[1] so this doesn't
yet actually have a meaningful change to the dependency tree.
[1] oe-core 4abd6ee9d4 ("rust-common.bbclass: rewrite toolchain wrappers in (native) python")
(From OE-Core rev: aee45fc067b2ccf3e365deb94584089b60cc7d4e)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
chrpath has limitations e.g. the original rpath in ELF have to bigger in size
than the one being edited into it by chrpath, some toolchains do not use RPATH
but emit the RUNPATHs into ELF files and chrpath is not able to handle the
runpaths, this is the case with mips and pp32 build of rust, especially
when using clang compiler to build them.
patchelf can do more:
Modify RUNPATH entries
Add RPATH/RUNPATH where none existed
Set longer paths than the original
Convert between RPATH and RUNPATH
(From OE-Core rev: 22b903f6620455e142e836412d3f7f6a4f03bea7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some unit tests were previously marked as ignored due to failures in earlier
versions of Rust. With the upgrade to Rust 1.85.1, these tests are now passing
consistently. They've been re-enabled and verified to run successfully on the
latest version.
(From OE-Core rev: 56149c8c2108973666251e21609a7210a91984cf)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GCC-15 has _CHKFEAT_GCS defined in arm_acle.h to indicate gcs intrinsics
support, this trips llvm libunwind gcs feature detection logic to set
gcs feature on. However the contructs used in unwindlib are assuming clang
and the needed target attribute is not available in gcc it should be +gcs
to work with both clang and gcc
(From OE-Core rev: aa5b42b32093fdd10e0a8f8a124322610c84f60b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some unit tests were previously marked as ignored due to failures in earlier
versions of Rust. With the upgrade to Rust 1.85.1, these tests are now passing
consistently. They've been re-enabled and verified to run successfully on the
latest version.
(From OE-Core rev: 65c207fb034848f9ef0de8cf8725c5eded363aca)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-ffile-prefix map is more comprehensive when it comes to reproducible
builds and its superset of all prefix-mapping options in compilers
This makes is cleaner and workable across gcc and clang, clang does not
support -fcanon-prefix-map and it has to be explicitly omitted when using
clang.
There are lambdas generated in templates by clang which still get the
absolute paths despite -fdebug-prefix-map, this helps with that as well.
nasm is an outlier and we have fixed it by adding -fdebug-prefix-map option
luckily we do not pass DEBUG_PREFIX_MAP to nasm, in all recipes which use
nasm either pass -fdebug-prefix-map explicitly to nasm or they rewrite it
to use nasm flags syntax.
We have discussed this in past [1]
[1] https://patchwork.yoctoproject.org/project/oe-core/patch/20230428032030.2047920-1-raj.khem@gmail.com/#10281
(From OE-Core rev: ff73fa7ef7666a6dbe34f15515bc3ab6e574c5b0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Jacob Kroon <jacob.kroon@gmail.com>
Cc: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some unit tests were previously marked as ignored due to failures in earlier
versions of Rust. With the upgrade to Rust 1.85.1, these tests are now passing
consistently. They've been re-enabled and verified to run successfully on the
latest version.
(From OE-Core rev: 775108f131412122beb2b844dc5e2a4d47ce3b89)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option currently floats and is leading to non-deterministic builds. It
is used for commandline option tab completion which we don't need in our
builds in general, let alone internally within rust's llvm.
This should fix autobuilder deterministic build issues.
(From OE-Core rev: c31859be39c68f215576ba73b8a3d66c8ea590d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rust stable version updated to 1.85.0
https://blog.rust-lang.org/2025/02/20/Rust-1.85.0.html
Some of the major updates:
- Update LIC_FILES_CHKSUM in libstd-rs and rust recipes.
License-Update: Unicode license text is updated to Unicode-3.0 License.
6d2a3e9786
[RP: Update LICENSE to reference Unicode-3.0]
- Pass '-Zforce-unstable-if-unmarked' to RUSTFLAGS in libstd-rs.bb
Fix: https://github.com/rust-lang/rust/issues/133857#issuecomment-2526341227
- Downgrade bootstrap cc version causing bootstrap to fail on custom targets. (Backported from v1.85.1)
Fix: e4ca11f87f
- Explicitly set float ABI for all ARM 32 bits targets.
Fix: a51fefcaab
- Rust v1.85.0 tarball doesn't ship gcc tree.
Drop "remove_gcc_directory" postfunc which removed it and prevented the bloat.
Fix: 13c3f9b949
Adapted the patch changes with v1.85.0:
repro-issue-fix-with-cc-crate-hashmap.patch
revert-link-std-statically-in-rustc_driver-feature.patch
rust-oe-selftest.patch
rv32-cargo-rustix-0.38.40-fix.patch
Dropped patches:
fix-tidy-check-failure.patch since it's merged with v1.85.0.
(From OE-Core rev: 3130069fdebb92f20b962fa8074564a27c3fb6b9)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'do_update_snapshot' task is failed with below error:
Exception: FileNotFoundError: [Errno 2] No such file or directory: '.../rustc-1.83.0-src/src/stage0.json'
There are changes in use of key-value format in stage0 file in
rust sources and the rust recipe should be apdated for that.
Changes in rust:
1adfffd07f
(From OE-Core rev: d64456f6ea58d683993b0bc7294baa889bafdf7b)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our main llvm recipe uses dynamic linking already but rust-llvm does not.
Enabling this significanly reduces the size of llvm-rust to about a third
of what it was, which is a bettter configuration for us leading to smaller
TMPDIR and sstate objects.
(From OE-Core rev: 2b6a6d4199e4eed65f20351d077a04a7cf9da460)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch works for rust-native but not other recipes which change ${S}.
Set it to use the correct path so it works for llvm-rust, cargo and others,
maximising the space saving.
(From OE-Core rev: 1aee0bc109c1457159440c279ddc1fe5a8d89586)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ignore the failing unit test.
The tidy check failed due to a typo, which was already reported and
fixed in the Rust upstream.
Upstream-Status: Backport [8e77349782]
(From OE-Core rev: 94a244a14075ead1b3b5e966c0fe713cd448cad8)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When multilibs are enabled, building rust is failing because of the following commit
68034f837a
with stage1/rustc cannot able to find dependent *.so files. The issue is
been fixed inrust-master with the following commit by passing the necessary library
paths before executing stage1/rustc
Upstream-Status: Backport [139d6ba054]
(From OE-Core rev: ab29b970ba7e08eabca92018d103af5f249ed2c5)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rust stable version updated to 1.84.1.
https://blog.rust-lang.org/2025/01/30/Rust-1.84.1.html
Renamed and modified the below patch to adapt the new version.
rv32-cargo-rustix-0.38.37-fix.patch->rv32-cargo-rustix-0.38.38-fix.patch
Modified the below patches to adapt the new version.
repro-issue-fix-with-cc-crate-hashmap.patch
revert-link-std-statically-in-rustc_driver-feature.patch
Dropped the below patches :
0001-NFC-fix-build-failure-100993.patch
6ee49080e4
revert-Zdual-proc-macros-additional-check.patch
Issue is fixed in rust-master and the fix is backported in the
subsequent patch of the series.
(From OE-Core rev: 4265f668de8c6708cb3a003ad655559031724149)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
>From Rust 1.84, the download-rustc and llvm-tools options were set to True
(previously they were False)
cce6f03754
(download-rustc)
38f0c099b2
(llvm-tools)
For tarball sources, the download-rustc option should be False, so it has been
reverted back to False.
Setting llvm-tools to True caused issues with finding llvm-objcopy, so this
has been changed back to False.
Upstream-Status: https://github.com/rust-lang/rust/pull/134240/
(From OE-Core rev: 2eb952d839e72c24a4180a57631c77910a0da980)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the "src/gcc" directory from the Rust source code to reduce the
filesystem build space.
In Rust 1.83 (and 1.84), a full GCC-14 tree was included, which caused
the tar.xz archive to increase by 128 MB and the unpacked sources to
grow by 1.3 GB. This was an upstream error that has been resolved in
Rust 1.85.
After updating to Rust 1.85 we can revert this removal of "src/gcc"
(From OE-Core rev: 26a345adc8e050657bfa0b51ea92a3d89e698d9a)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Few unit tests are failing for x86_64 arch.
Ignore the failing unit tests.
Upstream-Status: Pending
(From OE-Core rev: c71f9efc3140d279813ff6eb474fdbf5e677e348)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, download-ci-llvm was set to false. However, with the following commit:
7d579046c8 ,
which has been present from rust_1.83, it was changed to true. As a result, after
updating to rust_1.83, we encountered the following error during the build:
-------------------------------------------------------------------------------
| thread 'main' panicked at src/core/config/config.rs:2047:13:
| setting build-target.llvm-config is incompatible with download-ci-llvm.
| note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
-------------------------------------------------------------------------------
To resolve this issue, we are setting download-ci-llvm back to false.
(From OE-Core rev: d43424cba7e93ee30b410d0a024be441e2336dbd)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rust stable version updated to 1.83.0.
https://blog.rust-lang.org/2024/11/28/Rust-1.83.0.html
Renamed and modified the below patch to adapt the new version.
rv32-cargo-rustix-0.38.34-fix.patch->rv32-cargo-rustix-0.38.37-fix.patch
Modified the below patches to adapt the new version.
repro-issue-fix-with-cc-crate-hashmap.patch
revert-link-std-statically-in-rustc_driver-feature.patch
Dropped: zlib-off64_t.patch
a566e156b3kq
Because of the following commit ,
68034f837a
when we enable lib32, getting build failure because there is a check for target
support for "-Zdual-proc-macros" flag not functioning properly when lib32 is
enabled in the build environment. So for now reverting this commit and bring
back the previous behavior, where the "-Zdual-proc-macros" flag is always
added for building proc macros, regardless of the target architecture's support.
This would bypass the check introduced in the patch, allowing the build to
proceed without error, even when building for a 64-bit architecture with lib32 enabled.
(From OE-Core rev: 40d8dafdf556d7ce79c12a6de872193be9a0928a)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few tests are getting failed with x86 arch.The unsupported/failing tests
are added to the exclude list and ignore the failing unit tests.
Upstream-Status: Pending
(From OE-Core rev: b1340173be2a3a91fbb135eb0e24e50c3b996425)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new feature "Link std statically in rustc_driver" was introduced
in rust_1.82 [https://github.com/rust-lang/rust/pull/122362],and
which is causing the below failure in oe-selftest.
Running unittests src/main.rs (build/x86_64-unknown-linux-gnu/stage1-rustc/
x86_64-poky-linux-gnu/release/deps/rustc_main-92223b15c9f2d827)
uploaded ".../build/x86_64-unknown-linux-gnu/stage1-rustc/x86_64-poky-linux-gnu/
release/deps/rustc_main-92223b15c9f2d827", waiting for result
/tmp/work/test4056/rustc_main-92223b15c9f2d827: error while loading shared
libraries: librustc_driver-fb0866b1cd913c20.so: cannot open shared object file: No
such file or directory
The rustc_main binary depends on the librustc_driver-*.so file. However,
this file has not been copied to QEMU. If we manually copy the file into
QEMU and export the LD_LIBRARY_PATH, the issue does not occur. Issue
reprorted to upstream and reverted the buggy code as a workaround.
Upstream-Status: Inappropriate [reported at https://github.com/rust-lang/rust/issues/136237]
(From OE-Core rev: 977bd1a10771a6588e596e1bbfd49e9af659aa4a)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rust stable version updated to 1.82.0.
https://blog.rust-lang.org/2024/10/17/Rust-1.82.0.html
Renamed the below patch to adapt the new version.
rv32-cargo-rustix-0.38.28-fix.patch->rv32-cargo-rustix-0.38.34-fix.patch
Dropped: rv32-rustix-libc-backend.patch [addressed with rv32-cargo-rustix-0.38.34-fix.patch]
(From OE-Core rev: cfa431e734a642796140347f09c3c54b41a7bb75)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gold hasn't seen development in some time and is being dropped from binutils
releases. Drop the small number of special cases for it we were carrying.
This patch also turns off gold in the binutils recipe.
(From OE-Core rev: a4addb9ab63011e7c604fc5daff95559e7d214e7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original reproducibility fix was problematic for a couple reasons:
- disabling both lto and parallel builds had an unfortunate effect of nearly
doubling rust-native and rust build times (which are slow to begin with).
Disabling lto hurts runtime performance too.
- both of these things were done for the *entire build*, while the only
problematic item is the librustdoc crate.
- lto=off option in config.toml has an effect only on building rustc
(the compiler itself), and doesn't help with rustdoc reproducibility.
Actual fix is the codegen-units setting, which indirectly disables
lto via giving llvm only one unit to work with at a time.
After some digging, here's a more targeted fix for the problem.
Why librustdoc is non-reproducible, but not anything else
remains a mystery, hidden deep in rust-llvm's lto optimization code.
(From OE-Core rev: a1977407a88a2004c3a6d2dba1d5bfe1aa1664b2)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix markdown style issues using markdownlint tool [1]:
$ cat ./meta/recipes-devtools/rust/README-rust.md | mdl
(stdin):1: MD002 First header should be a top level header
(stdin):25: MD006 Consider starting bulleted lists at the beginning of the line
(stdin):3: MD009 Trailing spaces
(stdin):11: MD009 Trailing spaces
(stdin):26: MD009 Trailing spaces
(stdin):39: MD012 Multiple consecutive blank lines
(stdin):32: MD032 Lists should be surrounded by blank lines
(stdin):36: MD032 Lists should be surrounded by blank lines
[1] https://github.com/markdownlint/markdownlint
(From OE-Core rev: 62bade83dd6e021f11e9599a2699a1b202324f0f)
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes are much more readable with whitespace around the assignment operators.
Fix various assignments in OE-Core to show this is definitely the preferred
formatting.
(From OE-Core rev: 30ea609d3357fb3de911f2f6a5e6856c151b976a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO [#15061]
The rust target and linker are getting setting from the sdk environment and
so the config file is not needed. The redundant config file geneartion is removed.
(From OE-Core rev: d5f78816d2ad0f3e43ce883eef199d1683cfcbb4)
Signed-off-by: Harish Sadineni <Harish.Sadineni@windriver.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO [#15061]
The rust sdk installs both 'rust.sh' and 'cargo.sh' for lib32 and lib64 in the same location.
This causes below error while installing the lib32 & lib64 binaries:
Error: Transaction test error:
file /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/environment-setup.d/cargo.sh
conflicts between attempted installs of rust-cross-canadian-arm-1.67.1-r0.x86_64_nativesdk and
rust-cross-canadian-aarch64-1.67.1-r0.x86_64_nativesdk
file /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/environment-setup.d/rust.sh
conflicts between attempted installs of rust-cross-canadian-arm-1.67.1-r0.x86_64_nativesdk and
rust-cross-canadian-aarch64-1.67.1-r0.x86_64_nativesdk
ERROR: Task (virtual:multilib:lib32:/media/build/poky/meta/recipes-sato/images/core-image-sato.bb:do_populate_sdk)
failed with exit code '1'
The change includes:
- Prepending '${RUST_TARGET_SYS}' to 'rust.sh' to differentiate between target systems.
- Moving the non-target-specific environment variables to 'nativesdk-cargo' and 'nativesdk-rust',
instead of being managed by the cross-canadian recipe.
(From OE-Core rev: 40eb4bfe2f100ba5301046ca25110fcc55a640bb)
Signed-off-by: Harish Sadineni <Harish.Sadineni@windriver.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The idea of the base class dependency is to say "yes, I need a C cross compiler"
and this was never meant to be gcc specific. Looking at the codebase, whilst we
code triplets into this, it does overcomplicate things as there are only ever
limited, "target", "sdk" and the class extended versions like mutlilib.
After much thought, we can simplify this to virtual/cross-cc and virtual/nativesdk-cross-cc.
This lets us remove the "gcc" specific element as well as removing the over
complicated triplet usage.
At the same time, change the much less widely used "g++" variant to "c++" for
similar reasons and remove the triplet from virtual/XXX-binutils too.
Backwards compatibility mappings could be left but are just going to confuse
things in future so we'll just require users to update.
This simplification, whilst disruptive for any toolchain focused layers, will
make improved toolchain selection in the future much easier.
Since we no longer have overlapping variables, some code for that can just
be removed. The class extension code does need to start remapping some variables
but not the crosssdk target recipe names.
This patch is in two pieces, this one handles the renaming with the functional
changes separate in a second for easier review even if this breaks bisection.
(From OE-Core rev: 4ccc3bc8266c327bcc18c9a3faf7536210dfb9f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #15625]
The first attempt to get around the timeout was to double it from 5000
to 10000, which doesn't seem to be enough. Let's try to fix this by
extending the timeout by a factor of 10.
(From OE-Core rev: fb19e038582a2bfc414465ef396c30197f67128f)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the Rust build process, multiple copies of libstd-*.so are generated, as Rust copies the
required files from the stage2 build artifacts to the target image directory. When these build
binaries are copied to the image, Yocto's do_package step encounters an error. To resolve this,
the redundant libstd-*.so files are removed during the do_install step.
-----------------------------------------------------------------------------------------------
ERROR: rust-1.81.0-r0 do_package: rust: Multiple shlib providers for libstd-20c3de2d9292cd03.so:..
....
-----------------------------------------------------------------------------------------------
Multiple copies of libstd-*.so are generated during the Rust build process.
The redundant files are removed during the do_install step.
(From OE-Core rev: effd4ba4c23cbf53b01116b5cc81d6a29ca3b1a6)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was prompted by sstatetests.SStateHashSameSigs2.test_sstate_allarch_samesigs
where adwaita-icon-theme would fail due to new librsvg introducing
cargo-c-native into dependency path.
Rather than look into why is that, I simply converted the recipe
into the standard 'target + BBCLASSEXTEND' approach.
(From OE-Core rev: 80a2673a3081e623f30f25cc773ac9217e717958)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds a patch to increase the timeout in the process-sigpipe
rust selftest to prevent occasional failures under heavy server load.
The patch aims to reduce the likelihood of false negatives when the test
environment is overloaded.
Patch file:
* oeqa-selftest-Increase-timeout-in-process-sigpipe-ru.patch
Fixes [YOCTO #15625]
(From OE-Core rev: 12c85933e2150ba78a8a914787e400c95c5cf585)
Signed-off-by: Peter Tatrai <peter.tatrai.ext@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Sort the exclude list in alphabetical order.
* Add some of the upsupported/failing tests to the exclude list
and ignore the failing unit tests.
* Remove duplicated tests from the exclude list.
* Testing summary
Target PASS SKIPPED
ARM 17241 599
ARM64 17279 561
MIPS64 17228 612
PPC 17194 629
X86 17257 583
X86-64 17416 424
(From OE-Core rev: 61ec0f0f78d9db4c3fc02365713d5fd77b78a7ea)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
