This is useful code to double check the computed checksum value if nothing
else. Might as well have it in tree.
(Bitbake rev: 54ecf96c6f031927ee2410f6efde4e16f19bbf66)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Order of runtaskdeps is important. If the hashes differ we should print output.
This is complicated by shared work where the filenames themselves can differ,
but the checksum should not.
This fixes a case where two different checksums could show no output with
bitbake-diffsigs.
(Bitbake rev: 40c95cb9def282dc88234cd72ff462d7a01e47c1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add improvements in data reading, following
issues discovered in testing.
- elapsed_time is now read from buildstats
- we add safeguards to not fail logging if the build was triggered
with a toaster_brbe configuration, but it's running in
1.6 mode
- added log markups for build finish to let other programs
known when the work is done.
[YOCTO #6833]
[YOCTO #6685]
[YOCTO #6887]
(Bitbake rev: 0b225035cefee3d3713a93f9a432e5e4d4e174f1)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has always bothered me:
NOTE: Preparing runqueue
NOTE: Executing RunQueue Tasks
This patch changes the messages to be consistent.
(Bitbake rev: 72ac9f9227fbfb4dc8b933b357d21aa0e4060959)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it possble to fetch Gerrit review references which are
normally stored under refs/changes.
Please disregard previous patch with the same topic.
(Bitbake rev: 268e9c0c6830e8e621c418f20c2ca12dc840e48b)
Signed-off-by: Fredrik Svensson <fredrik.svensson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We avoid a race between the setting the TOASTER_BRBE variable
and reading the variable in toaster ui by supplying the variable
at server startup time through the toaster.conf post-read file.
Additional small changes are included, including marking the
build request with the environment id of where the build took place.
(Bitbake rev: 7c333350418c4140e6c988c5272940f8057d327d)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We change the saving of the build id to the build request as
soon is the build is created, as to allow for a consistent
display of build data while build is in progress.
(Bitbake rev: 9504ca6a69ba6da21f88b3cc77fa5910d886b6c3)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to consistently use LogMessage.INFO/WARNING/ERROR to make sure toaster knows
how to categories these rather than passing in the "raw" loglevel value
which in best case comes from python logging but worst case any value.
[YOCTO 6885]
(Bitbake rev: 3aa13bc1d8218c97c76581a895fa5f03ff807fbe)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hob was adding the redundant characters "\1" in SSTATE_MIRRORS variable. If
needed it is expected the user will add this instead so remove the code
that was doing this.
[YOCTO #6600]
(Bitbake rev: 73bf120062fc00c7e26dc4e77a7d140658d89daf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes urls of the form file://some/path/file;subdir=b. It also
adds in a couple of tests so we now tests these corner cases.
(Bitbake rev: 46306912a96444790efa9418d934dfdd36773ba1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check if the 'subdir' parameter exists and assign it to 'destdir' so that
files are copied in ${WORKDIR}/destdir. This fixes urls that are of the form
file://a;subdir=b.
(Bitbake rev: 836a986b365eb9798563ec08d90b346596de7791)
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Writing a log that the filesystem isn't being monitored for inode usage just
confuses users who are not aware about the nature of inodes in their filesystem,
so don't say anything, just silently disable the monitor. In general this only
happens on filesystems which don't have a limit on inodes.
(Bitbake rev: ca93bc84ee5fb94a50c11c47e4d212d7da649e24)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I could apply the label "release_1.0" to a super project that contains
many sub projects. If my recipes have SRC_URI's that use that label but
grab different sub-folders, than there's a bug where the cached localfile
(tar.gz) will not be unique and reused at the wrong times.
SRC_URI = "p4://perforce::1234@//depot/SuperProject/MiniProjectAAA/...;label=release_1.0 \
p4://perforce::1234@//depot/SuperProject/MiniProjectBBB/...;label=release_1.0"
(Bitbake rev: 3b5b1703b77490116dda895b29737cea51a3d6a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using options like -k, -f, -v and so on with the memory resident
server, they'd currently only be set on the initial values passed to
the original command. This ensures they now match those specified
on the commandline for the options where this makes sense.
To make this work, a command to update the options on the server side
is required so this is added.
[YOCTO #5292]
(Bitbake rev: 1c75cc4d0c8b606c1fe76e6bf60bf6a32298b105)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have:
FOO = "${bindir}/X Y"
FOO_remove = "${bindir}/X"
the expected result is "Y". Currently this doesn't work since the removed
expressions are not expanded first. This patch adjusts things so the
expressions are expanded before being processed for removal.
Also add a test to ensure this case continues to work.
[YOCTO #6624]
(Bitbake rev: 72a1ca4a104ccab73d6abcbd44db9c2636a58572)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to transfer some of the siggen data from the core/cooker into
the worker instances. There was a partial API created for this but
its ugly and its not possible to extend it from the siggen class.
This patch completes the interface/abstraction for the data and
means the class can extend/customise it in any siggen class.
(Bitbake rev: cf2d642052979d236185c5b8ca2c5478c06e62ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately it seems like the external use of the cooker
enableDataTracking() function broke at some point since the code that
reads it now runs within BBCooker's constructor. Since this now has to
be done early, add a parameter to Tinfoil's constructor to allow
enabling variable history tracking.
Fixes [YOCTO #6676].
(Bitbake rev: a9439b136f55f3f0e80ff053cd3b159da69ba362)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the improved exception handling added in an earlier commit bitbake
now stops when recieving a SIGWINCH. This happens frequently when
disconnecting and reconnecting tmux sessions and bitbake didn't survive.
Restore old behaviour of ignoring interrupted system calls but keep
proper exception handling for other errors.
(Bitbake rev: 418358a595c75f45b8d15160ec42bbe569562d91)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We refactor log saving to go through only one code path.
All logs that happened outside the build (i.e. before build
starting) now will be logged to either toaster_ui.log if the
build command ran in interactive mode, or to the build request
errors if the command ran in managed mode.
This enables proper display of error logs in project page.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the output in the python task/function run files is rather
incomplete and effectively useless. This enhances the code to take
advantage of the bitbake's dependency tracking and extend the output to
include dependencies. This makes the files more usable for debugging
purposes. Since this only happens at python function execution time, the
overhead is minimal in the grand scheme of things.
(Bitbake rev: 02667e048c3e632f857c87177c0022eaf5481802)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we get no profiling oversight into either the main bitbake worker
process, or the overall parsing before task execution. This adds in extra
profiling hooks so we can truly capture all parts of bitbake's execution
into the profile data.
To do this we modify the 'magic' value passed to bitbake-worker to trigger
the profiling, before the configuration data is sent over to the worker.
(Bitbake rev: 446e490bf485b712e5cee733dab5805254cdcad0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stream redirection of stdout is horrible. pstats takes a stream argument
so lets use that instead.
(Bitbake rev: 93d155f4766e27e7b004d13569aa03961fe89e3b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should only add user/password options if they're specified as in the
fetch case. Patch from Volker Vogelhuber <v.vogelhuber@digitalendoscopy.de>
(Bitbake rev: 303e6256947f4df4f283b75b7ccfdffa72864d67)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if you have hard dependencies between setscene tasks (like avahi on
base-passwd through useradd.bbclass), other dependencies may not be installed
even if these exist in sstate. For example, avahi -> expat -> pigz-native
(and avahi -> base-passwd) yet if you cleansstate base-passwd:
bitbake gzip-native:do_clean avahi:do_clean expat:do_clean pigz-native:do_clean base-passwd:do_cleansstate
bitbake avahi | tee
you will currently see pigz-native being rebuilt even though it was in
sstate. The fix for this is to continue to iterate dependency chains
around hard blocked dependencies as per this patch.
After this patch is applied, you will see pigz-native installed from sstate.
(Bitbake rev: f787957a224e8c2682a19e5c4a4d9c86bdce52ba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes an issue when trying to use depexp without specifying a
recipe. Before change:
$ bitbake -g -udepexp
Traceback (most recent call last):
File ".../bitbake/bin/bitbake", line 382, in <module>
ret = main()
File ".../bitbake/bin/bitbake", line 370, in main
return ui_module.main(server_connection.connection, server_connection.events, configParams)
File ".../bitbake/lib/bb/ui/depexp.py", line 201, in main
logger.error(cmdline['msg'])
NameError: global name 'logger' is not defined
After change:
$ bitbake -g -udepexp
Please specify a package name for dependency graph generation.
(Bitbake rev: 984ad90b2f1e29634dc79803a4a0404ab0534039)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
since python-2.5 string.endswith() takes a tuple
(Bitbake rev: 86a67a1fd4244da9343dbf14deed1ad0d3003f32)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With a shared work task like gcc, the task can be run from a variety of
different recipes which may have different virtual extensions in place.
Depending on whether gcc-runtime or nativesdk-gcc-runtime's do_preconfigure
task is called for example will change the sorting of the task hashes due
to the way clean_basename currently works.
The correct thing to do here is sort on the base filename first, then any
extension when ordering the hashes. This means we do account for things
like recipes with both a native and non-native dependency but we also fix
the shared work case where we don't care whether it was a virtual version
or not.
(Bitbake rev: 2e80b5d10a5037ed6f0bc227a1f9b42529c87086)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if an exception occurs in an event handler, the server shuts
down but the UI simply hangs. This happens in two places, firstly waiting
for events and secondly, sending events to a server which no longer exists.
The latter does time out, the former does not. These patches improve
both code sections to check if the main server process is alive and if not,
trigger things to shut down gracefully. This avoids the timeout in the
command sending case too.
This resolves various cases where the UI would simply hang indefintely.
(Bitbake rev: ac418e1112ff5f9c3157569316902f7a27fba4b4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our usage of multitprocessing is problematic. In particular, there is a bug
in python 2.7 multiprocessing where signals are not handled until command
completion instead of immediately.
This adds a workaround into our wrapper function to deal with the issue.
(Bitbake rev: a16185e602b39b71475aa7e9ee80ad2b1f28d0f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we trigger a shutdown whilst parsing for whatever reason, in some
cases we were not closing down the parser threads. This change
ensures we do so. The function names are not entirely intuitive
but the behaviour is more correct (and commented). The previous bug
with the stdout failure would trigger this one, if there was a cold
cache and parsing was required (but not otherwise).
(Bitbake rev: 25bfa2478f1c3a8eb695e1e5760e06db5be8f2fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, IOErrors are just passed over due to the broken Exception
clause. A command like "bitbake X | <invalid command>" would break stdout
triggering a traceback. With these changes we print the exceptions, shut down
the server gracefully and exit which is a much nicer behaviour and is less
confusion to the user.
(Bitbake rev: 9544108f7b413038d871ce6ca88232de2f2434d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if an exception occurs, we just run the idle handler again and
again, usually looping indefintely. Chances are the exception that occurred
will keep occuring and this is not a good place to be.
This was breaking the autobuilders with gigabytes of logs.
At least improve things so the cooker shuts down gracefully when this happens.
Some trace of the original problem may still be present on the console too!
(Bitbake rev: 1f28d8d3311262427938180435b68f0a35c2b330)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to have an event emitted when all of the sceneQueue tasks
have completed since the metadata can hook this for processing.
Therefore add such an event.
(Bitbake rev: 38d4f65bf1cbcdd5a2d60dff0e1d2859c34ed62e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re module was imported at the top, no need to do it again.
(Bitbake rev: c29c2370635075949c75937c237602600f4f10dc)
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
so that it doesn't check it twice for non-empty events
(Bitbake rev: e304ace6d8f7d0808ee401b7c01146b2798a81b4)
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
