There's no need for this variable anymore, as all consoles listed in
SERIAL_CONSOLES are checked for their existence before a getty is
started.
(From OE-Core rev: 8a1060952f8b6956acf747f3853401ac8a981fc3)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This disables Nagle's algorithm for our tcp serial connections which may
be causing data transfer issues.
(From OE-Core rev: f8eff4c427881a98333fdf7c42f66ed6603e4f03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the version overrides for the kernel for the x86 and arm machines
so we can go back to following the distro versions. The reasons for
these versions is mostly historical at this point as the issues were
resolved.
(From OE-Core rev: 298fa078fab58b64246376ffd70ad6a0c7589876)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The modesetting driver works well in qemu, so install it by default. The
plain framebuffer has been buggy in recent 6.4 kernels, a sign that it's
not getting much testing. The Xorg modesetting driver that can use more
powerful virtualised hardware is much better.
We override the default XSERVER because we want to pull in the GLX
extension to exercise that.
(From OE-Core rev: 7b5fc42488a514bf51d49ee5274731c6432efd1b)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If virtio-serial-device is used, the following error occurs on loongarch64:
qemu-system-loongarch64: -device virtio-serial-device: No "virtio-bus" bus found for device "virtio-serial-device"
(From OE-Core rev: 08734ec0c2083e90207559ecc659809b86b8779d)
Signed-off-by: Zang Ruochen <zangruochen@loongson.cn>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarly to x86, ensure we have the flags to the linker operating correctly (it
defaults to 32 bit). Normally it is driven by gcc so this hasn't shown up but
it does lead to hundreds of binutils test failures.
(From OE-Core rev: 2cf9013fd8df2bb67f93ffd44ccc23453cedf42a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure the CPU enabled in QEMU is correct for this architecture.
(From OE-Core rev: 6e0d176c4ce2bbbd975b74e41f63e60df7e3a554)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 6.4 kernel causes parselog failures when Xorg starts:
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): mode "640x480" test failed
(II) FBDEV(0): mode "640x480" test failed
(II) FBDEV(0): mode "640x480" test failed
(II) FBDEV(0): mode "640x480" test failed
(II) FBDEV(0): mode "640x480" not found
It appears to be specific to qemuarm without GL. Until this is resolved,
pin the qemuarm BSP to 6.1.
(From OE-Core rev: 28615ad284243db4465c843c456083c9d4b3a0c4)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable branch protection (PAC/BTI) for all aarch64 builds. This was
previously enabled at a global level in the GCC build, but that breaks
the gcc test suite.
(From OE-Core rev: 8905639d1cdc5ce809cc5ecd9672f5e86bf8a579)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In 5c6064 the qemuarm* machines gained vmalloc=256, because in testing
Bruce was seeing problems when the vmalloc area was too big for the
memory size of the machine (eg 256MB).
The intention was for the area to be very small, but 256 bytes is too
small and the kernel sets a minimal vmalloc area of 16MiB:
[ 0.000000] vmalloc area is too small, limiting to 16MiB
However, a 16MiB area is too small and results in pages of messages when
you try and use the system:
[ 242.822481] vmap allocation for size 4100096 failed: use vmalloc=<size> to increase size
There have been a number of changes since this commit, remove the
explicit vmalloc argument and use the default. I've tested that the
system still boots locally.
[1] early_vmalloc(), https://elixir.bootlin.com/linux/latest/source/arch/arm/mm/mmu.c#L1170
(From OE-Core rev: 816dd95320ba2e4a0f6b816e4f58999c0f235ae2)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To test nested kvm with qemu QB_CPU* needs to be modified.
E.g. set to "-cpu Haswell-noTSX-IBRS,vmx=on"
This allows to overwrite this from local.conf etc.
(From OE-Core rev: aa9d145d90893b04cde197e9b5f4dc574e4738e1)
Signed-off-by: Thomas Roos <throos@amazon.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was missed when riscv64nc was added
(From OE-Core rev: 0c549ef5732afdcd96407ceb045983eed2ca75f4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow a user to override the QM_SMP value giving them the opportunity to
select for themselves the number of CPUs to use in qemu.
(From OE-Core rev: 70a91e6d0357149c00b97f7e66e16cbc52997a92)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
6.1 has been soaking for a while now, so it is time to bump the
default qemu version to 6.1 and prepare to remove 5.19.
(From OE-Core rev: 91c1f7d4eb9ec5ad683c798812395df3a56747ba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On master oe, build a qemuppc64 with systemd as default init, when we
use nfs bootup, the kernel might panic due to missing symbol in dynamic
libraries as below:
hid-generic 0003:0627:0001.0003: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.0-3/input0
/sbin/init: /lib64/libm.so.6: version `XZ_5.0' not found (required by /usr/lib64/libkmod.so.2)
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
CPU: 0 PID: 1 Comm: init Not tainted 5.15.78-yocto-standard #1
Call Trace:
[c000000007443ba0] [c0000000009538d0] dump_stack_lvl+0x74/0xa8 (unreliable)
[c000000007443be0] [c000000000103524] panic+0x170/0x3cc
[c000000007443c80] [c00000000010cf64] do_exit+0xb44/0xb50
[c000000007443d50] [c00000000010d040] do_group_exit+0x60/0xd0
[c000000007443d90] [c00000000010d0d4] sys_exit_group+0x24/0x30
[c000000007443db0] [c00000000002cfd4] system_call_exception+0x194/0x2f0
[c000000007443e10] [c00000000000c2cc] system_call_common+0xec/0x250
--- interrupt: c00 at 0x7fff9ed9e840
NIP: 00007fff9ed9e840 LR: 00007fff9ed7da20 CTR: 0000000000000000
REGS: c000000007443e80 TRAP: 0c00 Not tainted (5.15.78-yocto-standard)
MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 24022442 XER: 00000000
One or more of the libraries systemd depends on failed to load due to
unresolved symbols/functions. This was intermittent - with a failure
rate estimated between 5% and 30%.
After checking the code, this issue happens on gcc 12, kirkstone is using
gcc 11 works well, with both using the exact same v5.15.84 kernel commit.
There is a kernel fix from upstream [1], they changed the rsize / wsize
to a multiple of PAGE_SIZE, when we applied this patch, the qemuppc64's
default r/wsize went from 4096 to 524288.But the qemuppc64 doesn't have
its own linux-yocto kernel branch, so apply this change might cause
regression with other platforms which share branch with qemuppc64.
So, we added an extra option for nfs rootfs, and set the qemuppc64 default
r/w size to 524288 to line up with the kernel fix[1].
Yocto did a similar thing in the distant past[2] - prior to boot-arg
adjustments existing - by allowing a Kconfig to set the defaults on
nfsboot, in order to work around hardware limitations.
Reference:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=940261a195080cf
[2] https://git.yoctoproject.org/linux-yocto-4.1/commit/?h=standard/base&id=a96cfd98add95
(From OE-Core rev: 14a81556ff1be326647e654424c8f1bf9d0db912)
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* use Skylake-Client to match QB_CPU_KVM as changed in:
https://git.openembedded.org/openembedded-core/commit/?id=6f2af1e5d1537b4d31e14946292bf58f0fd76fc9
* explicitly set -cpu instead of letting qemu to choose based
on host cpu
* check=false is still useful as e.g. on on AMD Threadripper 3970X:
orc/0.4.33-r0 $ PSEUDO_UNLOAD=1 qemu-x86_64 -r 3.2.0 -cpu Skylake-Client -L recipe-sysroot -E LD_LIBRARY_PATH=recipe-sysroot//usr/lib:recipe-sysroot//lib
orc/0.4.33-r0/build/meson-private/sanitycheckc_cross.exe
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.01H:ECX.x2apic [bit 21]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.01H:ECX.tsc-deadline [bit 24]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.07H:EBX.rdseed [bit 18]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.80000001H:ECX.3dnowprefetch [bit 8]
qemu-x86_64: warning: TCG doesn't support requested feature: CPUID.0DH:EAX.xsavec [bit 1]
* if this still doesn't work for you on your host, you might need to downgrade
DEFAULTTUNE to e.g. corei7-64 (all all the way back to core2-64), for
more details see:
https://www.openembedded.org/pipermail/openembedded-core/2018-April/150178.html
* the leading space shouldn't be needed, I've kept it for consistency
with other QEMU_EXTRAOPTIONS
(From OE-Core rev: d1a52559670921389a66a4c26d37481d6611042a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Effectively revert "qemux86-64: build for x86-64-v3 (2013 Haswell and later) rather than Core 2 from 2006"
(commit 6f2af1e5d1537b4d31e14946292bf58f0fd76fc9)
Much as I'd love us to use the latest tuning, we do have some autobuilder
hardware which isn't ready for this yet which breaks KVM and some qemu
user mode usage as there appear to be TCG bugs too. I suspect we're not
the only ones with such hardware.
Drop the tune back to core2-64, anyone can easily customise it
themselves if they need it. We can revisit this in a year or two
as we should be ready then. It has beena good test of the rest of the
support which all seems ready.
I'd have preferred to use corei7-64 but that causes
runqemu.RunqemuTests.test_boot_machine_iso to hang.
Leave the newer tune file inclusion so people can change tunes
more easily.
(From OE-Core rev: 369b1dfa28b1791d45f068acc765190defecd460)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to
- test those more recent instruction sets (AVX, AVX2, BMI1, BMI2, F16C, FMA, LZCNT, MOVBE, XSAVE)
- benefit from improved performance across the stack both in kvm-driven system emulation and when running
on real silicon.
For example, glibc:
https://www.phoronix.com/news/Glibc-strcasecmp-AVX2-EVEX
v4 level is adding AVX-512, which is far less established, particularly Intel has famously backtracked
from supporting it in Alder Lake/Raport Lake client CPUs and AMD has only implemented it in very recent Zen4 products:
https://www.phoronix.com/news/GCC-11-x86-64-Feature-Levels
(From OE-Core rev: 6f2af1e5d1537b4d31e14946292bf58f0fd76fc9)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu 7.2 finally allows us to move beyond building for original Core 2/Core i7 era hardware,
and this patch adds support for the newer generations. But first, a bit of
background:
Recently toolchains gained support for specifying x86-64 'levels' of
instruction set support; v3 corresponds to 2013-era Haswell CPUs
(and later), with AVX, AVX2 and a few other instructions that
were introduced in that generation. I believe this is preferrable
to picking a specific CPU model as the baseline.
Here's Phoronix's feature article that explains the feature and the available levels:
"Both LLVM Clang 12 and GCC 11 are ready to go in offering the new x86-64-v2, x86-64-v3, and x86-64-v4 targets.
These x86_64 micro-architecture feature levels have been about coming up with a few "classes" of Intel/AMD CPU processor support rather than continuing to rely on just the x86_64 baseline or targeting a
specific CPU family for optimizations. These new levels make it easier to raise the base requirements around Linux x86-64 whether it be for a Linux distribution or a particular software application where
the developer/ISV may be wanting to compile with greater instruction set extensions enabled in catering to more recent Intel/AMD CPUs."
https://www.phoronix.com/news/GCC-11-x86-64-Feature-Levels
Here's gcc docs for it:
https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html
And here's the formal specification (click on the pdf link):
https://gitlab.com/x86-psABIs/x86-64-ABI
The actual tune file was created by copying corei7 tunes and doing
search/replace on them. Qemu options were dropped as unnecessary.
32 bit tune was dropped as well, as there is no 32 bit only CPU
that also supports these new instructions; all of the v3 capable
chips are 64 bit.
(From OE-Core rev: ac041f90e71dba83b7144c91f929de88aaeae519)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We supported neoversen2 base on armv8.5a in the past, add tune include
for armv9a and support neoversen2 base on armv9a.
(From OE-Core rev: 4a2c4cfaaa5a6d7175c81064939e21bcfe3e736a)
Signed-off-by: Ruiqiang Hao <Ruiqiang.Hao@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Back in 0be64e54a0e6 ("qemux86: Allow higher tunes") we moved the
qemux86 machine to using the core-i7 tune file, for maximum flexibility
and to allow for enabling advanced processor features if desired or
required by various packagess, without changing the default tune. Do the
same now for qemux86-64.
Cc: Joshua Watt <JPEWhacker@gmail.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: a7411f5964f2e8384768b0a5e67817b3adc0ae8c)
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
v5.19 is the latest reference kernel, we bump our qemu machines
to use it by default.
(From OE-Core rev: 8f3b5cab696704fdc2060c710e3429859736a63a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-core previously carried patches to glibc that added optimized sqrt
implementations for various PowerPC chips. These were recently removed,
which now results in errors when compiling glibc with certian PowerPC
machine tunes:
checking sysdep dirs... configure: error: The 603e subspecies of powerpc is not supported.
Remove setting GLIBC_EXTRA_OECONF with parameters that are no longer
valid. Also remove a commented out setting of the variable that probably
isn't vaild anyway.
Fixes: 2511e937f445 ("glibc: Drop ppc sqrt optimisations")
(From OE-Core rev: 40f15066c24720aae36713c9856ffb4fae146a45)
Signed-off-by: Robert Joslyn <robert.joslyn@redrectangle.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add tune include for armv8.4a. This adds support only for bare armv8.4a
(and for crypto extension). There is no support for additional
instructions added by architecture extensions (except the main crypto
extension support).
(From OE-Core rev: 39743abada4a2459c74831aa78930de5461adee2)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These devices are historical, modern Linux will just use the USB
devices, and occasionally the init of these devices fails:
atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
psmouse serio1: Failed to reset mouse on isa0060/serio1: -5
Explicitly add a USB keyboard to go with the USB tablet, and disable the
i8042 entirely.
[ YOCTO #14718 ]
[ YOCTO #14743 ]
(From OE-Core rev: c01f47003f34b9ad2fe3d17e1ead84c27ee1e57d)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The virtio PCI devices seemed to be required for this machine for some
versions of qemu (based on errors from running qemu saying that the
devices don't exist). Changes to the entries here is all that is needed
to get it working.
(From OE-Core rev: 217deeb43036d1a046d6c5ea2c1ccdb94d3d605a)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This helps in making mouse response better where transition between host
and guest mouse is abrupt and not precise and as a result its difficult
to access stuff near the edges.
(From OE-Core rev: 010287147d2205790745e6dab8e955e71bc7cac2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This feature results in X11 crashes on Qemu since 5.13+ when it was added
disable it therefore for qemuppc64
(From OE-Core rev: 38503807e92699cb0fb1d207af73954cc953d728)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this fixes do_rootfs for core-image-sato after mesa update:
Problem: package packagegroup-core-x11-base-1.0-r1.noarch requires packagegroup-core-x11-xserver, but none of the providers can be installed
- conflicting requests
- nothing provides mesa-driver-i965 needed by packagegroup-core-x11-xserver-1.0-r40.intel_corei7_64
(try to add '--skip-broken' to skip uninstallable packages)
(From OE-Core rev: 63f10412d793c6c10290838eb230f179046f1d23)
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This updates the QEMU sounds options for x86 emulation,
when "runqemu" is called with the "audio" argument,
to fix the below error:
runqemu - ERROR - Failed to run qemu: qemu-system-x86_64: warning: '-soundhw ac97' is deprecated, please use '-device AC97' instead
(From OE-Core rev: b802a5dd1a79c7be3bc790223a733ebc9be4f117)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, the string "${PACKAGE_EXTRA_ARCHS:tune-armv8-crc}" will
show up in some bash tasks (notably opkg-arch-config.do_compile which is
how I found out about this) which will break things (besides obviously
not doing the intended thing of expanding to a list of architectures)
(From OE-Core rev: c5142f867aaa3fb6fc134781e2e54ce10eabd530)
Signed-off-by: Luna Gräfje <luna.graefje@orbitalsystems.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The crypto extension is optional for the Cortex-A73 processor, so we
shouldn't enable the crypto by default for the cortexa73 tune.
Introduce the cortexa73-crypto for the processors which do have
the cryptography unit.
(From OE-Core rev: c16b31ebd626d8a314264605d0bc5ab008cddd8d)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have enabled the crc extension by default for cortexa72 in patch
("tune-cortexa72: Enable the crc extension by default for cortexa72"),
then the cortexa72-crc seems redundant. So drop it. We also rename the
cortexa72-crc-crypto to cortexa72-crypto. With these changes, it will
break the BSPs which used these two tunes, but it should be easy to fix.
(From OE-Core rev: 03cebdd7ef923a8ac5c8b7c12c7cefe7ca0158db)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the support for the Neoverse N2 core, even though the
Neoverse N2 core implements the Arm v9.0-A architecture, but the support
of it in GCC is based on the Arm v8.5-A architecture. Please see the
commit 50d9db203bc3 ("aarch64: Add support for Neoverse N2 CPU") in GCC
for more detail.
(From OE-Core rev: 37597397f03b6b0082a702147dc536ff8b2fa7a3)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds support for the armv8.5a architecture and the crypto
extension.
(From OE-Core rev: 0cb1a6d9cb4c32526d79dad93c8053b3793053f8)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The crc extension is optional for the ARMv8.0 but is mandatory for the
cortexa72, so there is no reason not to enable it for the cortexa72
tune. With this change, the cortexa72-crc seems redundant. But we
had better to keep it to be compatible with the BSP which already used
that tune.
(From OE-Core rev: ca50267ab568d2f688844cb7c6cd867ed34168db)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
5.14 has been removed from the active kernel list, so we make
5.15 the new default.
(From OE-Core rev: 24fb6a22332f746e3bef89ff8e5719838f0ed8b5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's assumed that not all OpenGL ES implementation are compliant with
the 3.x specification. Therefore an additional virtual providers is
created to explicit compatibility with OpenGL ES 3 specification.
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From OE-Core rev: 405cd7a37988ced627fe6ad6fd3089c17f59367e)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cryptographic unit is optional for the Cortex-A72, but it was
included by default previously. This breaks building systems that
lack this functionality when using tune-cortexa72.inc.
To correct this, add a crypto entry in the tune file. Since CRC is
optional for ARMv8.0, do the same thing while we're at it.
For platforms that had been happily using tune-cortexa72.inc, a slight
degradation of performance will occur using the default. To correct
this, simply add:
DEFAULTTUNE = "cortexa72-crc-crypto"
(From OE-Core rev: 2568d537087adb0b592aa250bf628a7b48c3a9d3)
Signed-off-by: Jagadeesh Krishnanjanappa <workjagadeesh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us> (rewording commit message)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
5.14 is the latest reference kernel, so let's make it the
default.
(From OE-Core rev: af19c44c4af68568de2ddb5c11d8ad34ac600522)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
