There's no need to skip this test anymore, as skipping on qemuarm64 was
a proxy for "uses SERIAL_CONSOLES_CHECK" which no longer exists.
[ YOCTO #14962 ]
(From OE-Core rev: 1b8b1cb74c8f5f387a14d86f03f37f68c07dd9aa)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '--remap-path-prefix' option removes all references to build directory
structure in the debug information within the compiled output for Cargo
dependencies and the project's binary.
However, some references to build directories remains in the final binary
in .rustc section in the form of compressed metadata and this makes the
build output dependent on the folder structure of the computer it's compiled on.
So, for reproducible builds, use the configuration option
'remap-debuginfo = true' along with the '--remap-path-prefix'.
[YOCTO# 14875]
(From OE-Core rev: 6ae62259afbbe861ed74211dab18a27b8c8d8b7a)
Signed-off-by: Sundeep KOKKONDA <sundeep.kokkonda@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
it implements various combination of locking single/multiple recipe(s)/task(s)
it also tests that locked sig are architecture dependant
(From OE-Core rev: 7047a067548acd592a834d4315579fb606b4b9d7)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2.13 may not be buildable with latest compilers without patching
(From OE-Core rev: 406a33f896accc35a9cb6ab156f1e0f42dda67d8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using get_bb_var in the class setup leads to slow startup of oe-selftest.
Move the calls into setupClass instead to remove the overhead at the expense
of some code duplication.
(From OE-Core rev: 64786106746fbcc9d8a35eb6cfa82fd5c6bce7f8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"bitbake -e" executions from get_bb_var calls are slow and slow down oe-selftest
startup. Rationalise the code to avoid them and minimise the number of "parsing"
locations we use by caching key variables and passing them around more.
This was particularly problematic with oe-selftest -j usage since it would
have multiple bitbake -e executions per process making parallel usage
particularly slow.
(From OE-Core rev: 3689cadeb07d76e66f97d890e844f899f69666fe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the bb_get_var calls trigger multiple "bitbake -e" executions
which slow the start of oe-selftest for any test. Rework the code to avoid
these delays.
(From OE-Core rev: c9ea3570f5dbdaf8c61e445ae9de759a0b71e21f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test above this removal correctly looks at symlinks however to
remove a symlink we should call unlink(), not remove(). This avoids
some build failures/tracebacks.
(From OE-Core rev: dbdb6e73b0f52bc5f9429aca47802d51edbbc834)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test no longer worked with fixes to avoid overlapping license files
in deploy. Fix the test but also improve the logging messages so we don't
get "False is not True" messages upon failure.
(From OE-Core rev: 2fc7714dab5cce585bce4d6c4e8ffbefce2a709b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
assertTrue is a problematic call use in test cases since when it fails,
you just get an unhelpful "False is not True" message.
Replace some uses with assertIn/assertNotIn which will give more helpful results
and for the rest, add msg entries which given more helpful debugging.
For example, this patch would help debugging of #15176.
(From OE-Core rev: 35d4c39e0df1a304f557471151a03d1e4b0f30c7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't ignore return values from the git command lines. If something goes
wrong, fail the test right away.
(From OE-Core rev: dfc178a70d6fa60e89d4716f05d68e2c72c6ecd3)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A simple += operation is fine for working with TEST_RUNQEMUPARAMS so remove
the heavier append override usage.
(From OE-Core rev: e1a12c1212013823b44aff88317e5b30df03a35c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Builds core-image-minimal with testimage.bbclass and an ssh server
and then runs tests with slirp networking. Default test suite must
pass.
With full caches on x86_64 with x86_64 target the test passes in 416 seconds:
2023-08-21 09:01:12,295 - oe-selftest - INFO - Ran 1 test in 464.955s
2023-08-21 09:01:12,295 - oe-selftest - INFO - OK
2023-08-21 09:01:19,648 - oe-selftest - INFO - RESULTS:
2023-08-21 09:01:19,648 - oe-selftest - INFO - RESULTS - runtime_test.TestImage.test_testimage_slirp: PASSED (416.62s)
2023-08-21 09:01:19,711 - oe-selftest - INFO - SUMMARY:
2023-08-21 09:01:19,711 - oe-selftest - INFO - oe-selftest () - Ran 1 test in 464.956s
2023-08-21 09:01:19,711 - oe-selftest - INFO - oe-selftest - OK - All required tests passed (successes=1, skipped=0, failures=0, errors=0)
(From OE-Core rev: a93147278ee92b6aba281ab2b4b7b9d79dc1c89f)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't overwrite TEST_RUNQEMUPARAMS since user may have added "slirp"
or similar things to it in site.conf, auto.conf or local.conf. Use
:append to add to it. Fixes failing tests when only "slirp" networking
works with qemu and tun based one is broken on the host machine.
(From OE-Core rev: 5c1d94aa207e5c9a884bf3104eb9e8d1f8b6e432)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have autobuilder workers which don't have the -b option unfortunately.
This reverts commit 5ec557467dda29309e25102b507bb919275bedbb.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check return values of each git command and set initial branch name
to avoid this warning on every test run:
NOTE: Starting bitbake server...
hint: Using 'master' as the name for the initial branch. This default branch name
hint: is subject to change. To configure the initial branch name to use in all
hint: of your new repositories, which will suppress this warning, call:
hint:
hint: git config --global init.defaultBranch <name>
hint:
hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and
hint: 'development'. The just-created branch can be renamed via this command:
hint:
hint: git branch -m <name>
(From OE-Core rev: 5ec557467dda29309e25102b507bb919275bedbb)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not a warning but a handled case and layer gets added
automatically. Very few build configs have this layer enabled
by default.
(From OE-Core rev: 9a2493ea83f0b30578a819de05108502aaadc7f5)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds support for creating FAT formatted file system images (useful for
boot partitions on some SoCs).
Note that FAT partitions are limited in what they can represent (no
symlinks or device files), so they can't really be used for general
purpose root file systems. As such, they are skipped when testing for
that purpose.
(From OE-Core rev: 440fa508d362b8a449beb1b82dd999e980b753b7)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that SRCPV isn't needed we can simplify things in a few places...
(From OE-Core rev: 843f82a246a535c353e08072f252d1dc78217872)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Source control information being present in PV used to be a hard requirement
for bitbake to operate correctly. Now that hashes are a required part of task
stamps, this requirement no longer exists.
This means we can defer the hash pieces to PKGV and simplify PV.
Use new bitbake fetcher API to inject the source revisions directly into the hash
allowing removal of some horrible code from base.bbclass and avoiding any hardcoding
about how SRCREV may or may not be used.
Use that API to object the string to append to PKGV and append that directly.
The user visible effect of this change is that PV will no longer have revision
information in it and this will now be appended to PV through PKGV when the
packages are written. Since PV is used in STAMP and WORKDIR, users will see
small directory naming and stamp naming changes.
This will mean that sstate reuse through hash equivalence where the source
revision changes but the output does not will become possible as the sstate
naming will become less specific and no longer contain the revision.
The SRCPV variable will no longer be needed in PV and is effectively now just
a null operation. Usage can be removed over time.
(From OE-Core rev: a8e7b0f932b9ea69b3a218fca18041676c65aba0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
e9cff55e73 has switched tag listing from bare "git tag" to "git
ls-remote" to make sure not to miss remote tags which are not fetched
locally. This mechanism first checks for configured remote repository, next
for possibly passed url, and then fails if none worked.
However there are still cases where no remote repository is
configured and no url is provided (for instance: buildperf tests use an
empty git directory to store tests). Fix those cases by putting back the
old behavior (local tags check) as last resort, with at least a warning for
future diagnostics if we still encounter tagging issues
Fixes: e9cff55e73 ("oeqa/utils/gitarchive: fix tag computation when creating archive")
(From OE-Core rev: 34e1f845687d2f7169f5d6c1bb54e1a7ab5412c4)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Propagate a "log" parameter to get_tags in order to know what method is
used to retrieve existing tags
(From OE-Core rev: f8212eda45444dfb330e4d930eeceefde936adeb)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add specific tests on gitarchive for when tag listing is required but no
remote is configured in target directory: it should either succeed if valid
url is provided, or fail is url is not provided or wrong
(From OE-Core rev: 5e9d84d82fde81d66550d8c694ea70f0911fa4f7)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test suite for gitarchive.py. For now, only introduce tests on
methods which needs to read existing tags
The tests rely on tmpdirs to create local, "fake" results repository in
order to allow basic git commands
(From OE-Core rev: bc9b8ef4bc3e51ba7fca372ab7e532a80975d819)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd now requires usrmerge, ensure this is always the case in
our test cases.
(From OE-Core rev: 465bf84c523403ccc7dc6ed8c2a9c32d85929e8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't have systemd here any longer without usrmerge. We don't really
want to enable the latter since having separate usr will likely result in
a class of reproducibility and host contamination issues that enabling it
might hide.
Also drop INHIBIT_PACKAGE_STRIP since we generally don't build with that
and the debug binaries should be generated regardless. I suspect this
is legacy from older issues.
(From OE-Core rev: 7b7411788e805fa067dd672c9771dcaf2af918a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously some dependencies couldn't be followed through their siginfo
files. This has been fixed, add a test to ensure this doesn't regress.
(From OE-Core rev: a59cd1502ff14c5d8ccb04385bf4a3ad338d998d)
Signed-off-by: Yang Xu <yang.xu@mediatek.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was done in a selftest, but that is too late and creates
friction in integration as errors are not seen until autobuilder fails.
Bonus fix: SUMMARY check wasn't even working, as in the absence
of one set in the recipe there is a default value set from bitbake.conf.
I left DESCRIPTION check out for now, as many recipes don't actually
have it, and it's set from SUMMARY (plus a dot) if absent.
(From OE-Core rev: 4144c2f43da39336b03cfd612cbe1694cbf8c7bd)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To match the other tests, round the test duration to an intger value
so the test reports are consistent.
(From OE-Core rev: c5be3b22a7d5b3f211080ecdf05a077f8b413ef2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add the failing test cases in exclude_list to exclude them from testing during the Rust Oe-selftest.
* Drop meta/recipes-devtools/rust/files/rust-oe-selftest.patch file as the failing tests are
moved from being a patch to exclude_list in meta/lib/oeqa/selftest/cases/rust.py.
* When updating to a newer version of Rust, it is manually needed to update the exclude_list. The tests that fail are observed to
work on some versions and fail on others. These tests have been excluded in order to successfully complete testing of Rust Oe-selftest.
* The tests that are passed and skipped are as follows-
Target PASS SKIPPED
ARM 15507 428
ARM64 15535 400
MIPS64 15479 456
X86 15528 407
X86-64 15643 292
Also, time the test execution and pass the time taken for inclusion in the test report.
[RP: Note duration addiion in the commit log]
(From OE-Core rev: e81197c4d3b36e9ad52e56708c21987cacd13147)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides a more reliable test execution when running tests that
write a large buffer/file and significantly reduces the localedata test
failures.
(From OE-Core rev: 97a7612e3959bc9c75116a4e696f47cc31aea75d)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the tests trigger OOM and fail. Increase the amount of memory
available so we dont run into these issues.
(From OE-Core rev: 4d22dba482cb19ffcff5abee73f24526ea9d1c2a)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the override so we actually pass the correct value to glibc.
(From OE-Core rev: 38fd2120f0f48512091ddad6205ce19839eaf589)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- After introducing the CVE_STATUS and CVE_CHECK_STATUSMAP flag
variables, CVEs could contain a more information for assigned statuses.
- Add an example conversion in logrotate recipe.
(From OE-Core rev: da1f34b58fd106a40c296b68daf8a7e5db354c9a)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Ensure the test/class naming doesn't allow the to be triggered
without the toolchain decorator
* Add the toolchain-user decorator so it runs on non-IA targets
* Strip the leading "[XX] " prefix from the test names
* Ensure skipped test counts are passed through correctly (as SKIPPED, not SKIP)
* Avoid duplicate test results and show a warning if any are found (duplicates
were from other sources in the end but the code remains sensible to have)
(From OE-Core rev: b1718ce5b2b2db35a8e1c88087deee41f99094b4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch implements Rust testing framework similar to other selftest,
specifically the gcc selftest in OE. It uses the client and server
based method to test the binaries for cross-target on the image.
The test framework is a wrapper around the Rust build system as ./x.py
test. It tests many functionalities of Rust distribution like tools,
documentation, libraries, packages, tools, Cargo, Crater etc.
Please refer the following link for detailed description of Rust
testing:-
https://rustc-dev-guide.rust-lang.org/tests/intro.html#tool-tests
To support the rust tests in oe-core, the following functions were
added:-
setup_cargo_environment(): Build bootstrap and some early stage tools.
do_rust_setup_snapshot(): Install the snapshot version of rust binaries.
do_configure(): To generate config.toml
do_compile(): To build "remote-test-server" for qemu target image.
Approximate Number of Tests Run in the Rust Testsuite :- 18000
Approximate Number of Tests that FAIL in bitbake environment :- 100-150
Normally majority of the testcases are present in major folder "test/"
It contributes to more than 80% of the testcases present in Rust test
framework. These tests pass as expected on any Rust versions without
much fuss. The tests that fail are of less important and contribute to
less than 2% of the total testcases. These minor tests are observed to
work on some versions and fail on others. They have to be added, ignored
or excluded for different versions as per the behavior.
These tests have been ignored or excluded in the Rust selftest
environment to generate success of completing the testsuite.
These tests work in parallel mode even in the skipped test mode as
expected. Although the patch to disable tests is large, it is very simple
in that it only disables tests. When updating to a newer version of Rust,
the patch can usually be ported in a day.
Tested for X86, X86-64, ARM, ARM64 and MIPS64 on Ubuntu 22.04.
(From OE-Core rev: 7c3346d8fbe85302b605bb3f772b029ea7bfaa6c)
Signed-off-by: pgowda <pgowda.cve@gmail.com>
Signed-off-by: Vinay Kumar <vinay.m.engg@gmail.com>
Signed-off-by: Yash Shinde <yashinde145@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ${IMAGE_NAME}${IMAGE_NAME_SUFFIX} is almost always used together already
and when they aren't it's usually because of hardcoded '.rootfs' suffix
* it's a bit strange, because ${IMAGE_NAME_SUFFIX} is applied after the
version from ${IMAGE_VERSION_SUFFIX}, if we move it to ${IMAGE_LINK_NAME}
then it will be applied before the version and ${IMAGE_LINK_NAME}
will be just the version-less symlink to latest built version.
* it's not added to INITRAMFS_IMAGE_NAME as it assumes that all
images used as initramfs will set IMAGE_NAME_SUFFIX to empty.
Many already do as shown bellow, but you might need to extend
this list in your layer.
* this also allows to drop support for imgsuffix varflag, recipes which
don't want to have .rootfs suffix can just set IMAGE_NAME_SUFFIX to
empty and it will be consistently respected by both IMAGE_NAME and IMAGE_LINK_NAME
* imgsuffix = d.getVarFlag("do_" + taskname, 'imgsuffix') or d.expand("${IMAGE_NAME_SUFFIX}.")
is kind of terrible, notice trailing '.' after ${IMAGE_NAME_SUFFIX}
while this dot was in imgsuffix in:
do_bootimg[imgsuffix] = "."
but in both cases it's not really part of the imgsuffix, but the
"extension" type separator as in dst variable:
dst = os.path.join(deploy_dir, link_name + "." + type)
- src = img_name + imgsuffix + type
+ src = img_name + "." + type
* for ubifs volumes move vname after IMAGE_NAME_SUFFIX
* to better document these changes here is an example with default poky
configuration with just:
IMAGE_FSTYPES:append:pn-core-image-minimal = " live wic wic.vmdk ubi"
MKUBIFS_ARGS = "-m 2048 -e 129024 -c 968 -x zlib"
UBINIZE_ARGS = "-m 2048 -p 131072 -s 512"
added in local.conf, so that deploy_dir has also some initramfs and more
IMAGE_FSTYPES
* "ls -lahi tmp/deploy/images/qemux86-64/"
output after "bitbake core-image-minimal"
And deploy-dir is cleaned between runs with:
bitbake -c clean core-image-minimal core-image-minimal-initramfs virtual/kernel grub-efi systemd-boot
The output confirms that the only change is ".rootfs" added not only
in ext4 and manifest files, but also for hddimg, iso, qemuboot.conf
testdata.json for both the actual artifacts as well as the symlinks
while core-image-minimal-initramfs doesn't have them as IMAGE_NAME_SUFFIX
was already set to empty there:
meta/classes-recipe/baremetal-image.bbclass:IMAGE_NAME_SUFFIX ?= ""
meta/recipes-core/images/core-image-minimal-initramfs.bb:IMAGE_NAME_SUFFIX ?= ""
meta/recipes-core/images/core-image-tiny-initramfs.bb:IMAGE_NAME_SUFFIX ?= ""
meta/recipes-extended/baremetal-example/baremetal-helloworld_git.bb:IMAGE_NAME_SUFFIX ?= ""
meta/recipes-extended/images/core-image-testcontroller-initramfs.bb:IMAGE_NAME_SUFFIX ?= ""
before these changes:
total 297M
31269162 drwxr-xr-x 2 martin martin 4.0K Mar 7 19:19 .
31263942 drwxr-xr-x 3 martin martin 4.0K Mar 7 12:53 ..
35845703 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin
35845704 -rw-r--r-- 2 martin martin 11M Mar 7 12:27 bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin
35845702 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage-qemux86-64.bin -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin
40236967 -rw-r--r-- 2 martin martin 13M Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.cpio.gz
40203232 -rw-r--r-- 2 martin martin 1.1K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.manifest
40212700 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.qemuboot.conf
40211556 -rw-r--r-- 2 martin martin 211K Mar 7 19:19 core-image-minimal-initramfs-qemux86-64-20230307181808.testdata.json
40236964 lrwxrwxrwx 2 martin martin 62 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.cpio.gz -> core-image-minimal-initramfs-qemux86-64-20230307181808.cpio.gz
40203235 lrwxrwxrwx 2 martin martin 63 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.manifest -> core-image-minimal-initramfs-qemux86-64-20230307181808.manifest
40212690 lrwxrwxrwx 2 martin martin 68 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.qemuboot.conf -> core-image-minimal-initramfs-qemux86-64-20230307181808.qemuboot.conf
40211560 lrwxrwxrwx 2 martin martin 68 Mar 7 19:19 core-image-minimal-initramfs-qemux86-64.testdata.json -> core-image-minimal-initramfs-qemux86-64-20230307181808.testdata.json
40237307 -rw-r--r-- 2 martin martin 57M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.hddimg
40237329 -rw-r--r-- 2 martin martin 56M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.iso
40220347 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.qemuboot.conf
40236942 -rw-r--r-- 2 martin martin 34M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ext4
40211563 -rw-r--r-- 2 martin martin 1.2K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.manifest
40237206 -rw-r--r-- 2 martin martin 16M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.tar.bz2
40237216 -rw-r--r-- 2 martin martin 20M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ubi
40224358 -rw-r--r-- 2 martin martin 19M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.ubifs
40360386 -rw-r--r-- 2 martin martin 73M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.wic
40237285 -rw-r--r-- 2 martin martin 35M Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.rootfs.wic.vmdk
40209866 -rw-r--r-- 2 martin martin 206K Mar 7 19:19 core-image-minimal-qemux86-64-20230307181808.testdata.json
40236946 lrwxrwxrwx 2 martin martin 56 Mar 7 19:19 core-image-minimal-qemux86-64.ext4 -> core-image-minimal-qemux86-64-20230307181808.rootfs.ext4
40237336 lrwxrwxrwx 2 martin martin 51 Mar 7 19:19 core-image-minimal-qemux86-64.hddimg -> core-image-minimal-qemux86-64-20230307181808.hddimg
40237337 lrwxrwxrwx 2 martin martin 48 Mar 7 19:19 core-image-minimal-qemux86-64.iso -> core-image-minimal-qemux86-64-20230307181808.iso
40211564 lrwxrwxrwx 2 martin martin 60 Mar 7 19:19 core-image-minimal-qemux86-64.manifest -> core-image-minimal-qemux86-64-20230307181808.rootfs.manifest
40220348 lrwxrwxrwx 2 martin martin 58 Mar 7 19:19 core-image-minimal-qemux86-64.qemuboot.conf -> core-image-minimal-qemux86-64-20230307181808.qemuboot.conf
40237205 lrwxrwxrwx 2 martin martin 59 Mar 7 19:19 core-image-minimal-qemux86-64.tar.bz2 -> core-image-minimal-qemux86-64-20230307181808.rootfs.tar.bz2
40209873 lrwxrwxrwx 2 martin martin 58 Mar 7 19:19 core-image-minimal-qemux86-64.testdata.json -> core-image-minimal-qemux86-64-20230307181808.testdata.json
40237217 lrwxrwxrwx 2 martin martin 55 Mar 7 19:19 core-image-minimal-qemux86-64.ubi -> core-image-minimal-qemux86-64-20230307181808.rootfs.ubi
40236771 lrwxrwxrwx 2 martin martin 57 Mar 7 19:19 core-image-minimal-qemux86-64.ubifs -> core-image-minimal-qemux86-64-20230307181808.rootfs.ubifs
40237287 lrwxrwxrwx 2 martin martin 55 Mar 7 19:19 core-image-minimal-qemux86-64.wic -> core-image-minimal-qemux86-64-20230307181808.rootfs.wic
40237286 lrwxrwxrwx 2 martin martin 60 Mar 7 19:19 core-image-minimal-qemux86-64.wic.vmdk -> core-image-minimal-qemux86-64-20230307181808.rootfs.wic.vmdk
40237192 -rw-r--r-- 2 martin martin 3.8K Mar 7 19:19 core-image-minimal.env
34458377 -rw-r--r-- 2 martin martin 616K Mar 7 17:55 grub-efi-bootx64.efi
34963606 -rwxr-xr-x 2 martin martin 103K Mar 6 22:02 linuxx64.efi.stub
35845662 -rw-r--r-- 2 martin martin 8.2M Mar 7 12:27 modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz
35845701 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 modules-qemux86-64.tgz -> modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz
34963605 -rwxr-xr-x 2 martin martin 140K Mar 6 22:02 systemd-bootx64.efi
27651415 -rw-r--r-- 2 martin martin 274 Mar 7 19:19 ubinize-core-image-minimal-qemux86-64-20230307181808.cfg
after these changes:
total 297M
31269162 drwxr-xr-x 2 martin martin 4.0K Mar 7 19:16 .
31263942 drwxr-xr-x 3 martin martin 4.0K Mar 7 12:53 ..
39479266 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin
39479267 -rw-r--r-- 2 martin martin 11M Mar 7 12:27 bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin
39479264 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 bzImage-qemux86-64.bin -> bzImage--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.bin
39648810 -rw-r--r-- 2 martin martin 13M Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.cpio.gz
39638400 -rw-r--r-- 2 martin martin 1.1K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.manifest
39644650 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.qemuboot.conf
39637657 -rw-r--r-- 2 martin martin 211K Mar 7 19:15 core-image-minimal-initramfs-qemux86-64-20230307181456.testdata.json
39648091 lrwxrwxrwx 2 martin martin 62 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.cpio.gz -> core-image-minimal-initramfs-qemux86-64-20230307181456.cpio.gz
39638401 lrwxrwxrwx 2 martin martin 63 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.manifest -> core-image-minimal-initramfs-qemux86-64-20230307181456.manifest
39644651 lrwxrwxrwx 2 martin martin 68 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.qemuboot.conf -> core-image-minimal-initramfs-qemux86-64-20230307181456.qemuboot.conf
39637662 lrwxrwxrwx 2 martin martin 68 Mar 7 19:15 core-image-minimal-initramfs-qemux86-64.testdata.json -> core-image-minimal-initramfs-qemux86-64-20230307181456.testdata.json
39654281 -rw-r--r-- 2 martin martin 34M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ext4
39656710 -rw-r--r-- 2 martin martin 57M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.hddimg
39657112 -rw-r--r-- 2 martin martin 56M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.iso
39645313 -rw-r--r-- 2 martin martin 1.2K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.manifest
39646013 -rw-r--r-- 2 martin martin 1.6K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.qemuboot.conf
39656336 -rw-r--r-- 2 martin martin 16M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.tar.bz2
39644408 -rw-r--r-- 2 martin martin 206K Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.testdata.json
39656583 -rw-r--r-- 2 martin martin 20M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ubi
39654124 -rw-r--r-- 2 martin martin 19M Mar 7 19:15 core-image-minimal-qemux86-64.rootfs-20230307181456.ubifs
39802371 -rw-r--r-- 2 martin martin 73M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.wic
39657113 -rw-r--r-- 2 martin martin 35M Mar 7 19:16 core-image-minimal-qemux86-64.rootfs-20230307181456.wic.vmdk
39654412 lrwxrwxrwx 2 martin martin 56 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ext4 -> core-image-minimal-qemux86-64.rootfs-20230307181456.ext4
39657167 lrwxrwxrwx 2 martin martin 58 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.hddimg -> core-image-minimal-qemux86-64.rootfs-20230307181456.hddimg
39657168 lrwxrwxrwx 2 martin martin 55 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.iso -> core-image-minimal-qemux86-64.rootfs-20230307181456.iso
39645316 lrwxrwxrwx 2 martin martin 60 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.manifest -> core-image-minimal-qemux86-64.rootfs-20230307181456.manifest
39646014 lrwxrwxrwx 2 martin martin 65 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.qemuboot.conf -> core-image-minimal-qemux86-64.rootfs-20230307181456.qemuboot.conf
39656315 lrwxrwxrwx 2 martin martin 59 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.tar.bz2 -> core-image-minimal-qemux86-64.rootfs-20230307181456.tar.bz2
39644406 lrwxrwxrwx 2 martin martin 65 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.testdata.json -> core-image-minimal-qemux86-64.rootfs-20230307181456.testdata.json
39656584 lrwxrwxrwx 2 martin martin 55 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ubi -> core-image-minimal-qemux86-64.rootfs-20230307181456.ubi
39654775 lrwxrwxrwx 2 martin martin 57 Mar 7 19:15 core-image-minimal-qemux86-64.rootfs.ubifs -> core-image-minimal-qemux86-64.rootfs-20230307181456.ubifs
39657126 lrwxrwxrwx 2 martin martin 55 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.wic -> core-image-minimal-qemux86-64.rootfs-20230307181456.wic
39657088 lrwxrwxrwx 2 martin martin 60 Mar 7 19:16 core-image-minimal-qemux86-64.rootfs.wic.vmdk -> core-image-minimal-qemux86-64.rootfs-20230307181456.wic.vmdk
39654418 -rw-r--r-- 2 martin martin 3.8K Mar 7 19:15 core-image-minimal.env
39475732 -rw-r--r-- 2 martin martin 616K Mar 7 17:55 grub-efi-bootx64.efi
31507074 -rwxr-xr-x 2 martin martin 103K Mar 6 22:02 linuxx64.efi.stub
39479261 -rw-r--r-- 2 martin martin 8.2M Mar 7 12:27 modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz
39479263 lrwxrwxrwx 2 martin martin 77 Mar 7 12:27 modules-qemux86-64.tgz -> modules--6.1.14+git0+e8d08fc4c0_b05ca3429c-r0.0-qemux86-64-20230307112110.tgz
31507058 -rwxr-xr-x 2 martin martin 140K Mar 6 22:02 systemd-bootx64.efi
27651415 -rw-r--r-- 2 martin martin 274 Mar 7 19:15 ubinize-core-image-minimal-qemux86-64.rootfs-20230307181456.cfg
[YOCTO #12937]
(From OE-Core rev: 26d97acc71379ab6702fa54a23b6542a3f51779c)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License-update: formatting, years
Upstream has completely overhauled the build system
(cmake -> meson) and available options. Add the most
important ones that require external dependencies;
there's plenty more if someone finds them useful.
(From OE-Core rev: bbcfef76c3d412f1a79c77f8712aff36190bf7fa)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The replacement cve-update-nvd2-native is working, so we can remove the
old recipe now.
(From OE-Core rev: 17eb07885147a06bf7bdd43f7869fe4411be80a0)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have layer overrides, we can easily enable patch-status in
ERROR_QA without the hardcoded code making it easier for other layers
to opt into the checks.
(From OE-Core rev: 61a881fdbe8b5a21c6276b8a5d06cc30486b1eb3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a follow-up of 76e5fcb2 that also allow users to chose
the package manager using OEQA_REPRODUCIBLE_TEST_PACKAGE
(From OE-Core rev: 3d414d85b44077bac57aba36707b0fc699a73e97)
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
