Some minor updates here. Mainly, bring a list into conformance
for use of capitalization in the bolded item heads.
(From yocto-docs rev: a9c9bb36caa146b0ff8338cb1fad850d75a64997)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the various fields for what goes into the name of one
of these *.sh files pulled from the download sites.
(From yocto-docs rev: 4b326ae834d50607062c2f29c27fccd496489eb6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note was written such that it appears some performance tools
were just recently deprecated with this release of the Eclipse
Yocto Project plug-in. This is not the case. I updated the
note wording to simply state that those tools are deprecated
with the plug-in.
(From yocto-docs rev: 4e8aa076ec009c71d7ceeda5c64a617e1c2696fb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made sure that each first occurrence in a chapter used the
"tm" mark.
(From yocto-docs rev: b7b21441b5fc009b8161902a10cfe1863d87b8a8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wording to note that the rootfs might be compressed
depending on the IMAGE_FSTYPES setting, which would have to
actually do compression. Also, fixed examples of "do_image_type"
and "do_image_ext4" so that there is no "[depends]" as part
of the example.
(From yocto-docs rev: 18ecdc6dd8722212c94000950841a4c06d3e48aa)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some inconsistencies in the links to the concepts-manual existed.
I fixed these throughout the YP manual set.
(From yocto-docs rev: ad7f840bb6f4a5248ef455b98ce9b35197e07e1a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistent use when referencing the getting-started
manual. The manual's name does not include the word
"Manual". So, I cleaned this up across the manual set and
also in the mega-manual.sed file, which was incorrectly
processing the links to that manual that do not target a
specific section.
(From yocto-docs rev: 0f5321416f7ec50cb6c96cccb7c87ef191a25367)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a few links that were not using the correct wording when
referencing a section to the dev-manual. Also, fixed one link
that was assuming a section outside the dev-manual when the
link was to a section inside the dev-manual.
(From yocto-docs rev: 7a577b135e1a01d6a9924ba89733e46d029c6cca)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The escaping of the double quote characters is not necessary
in the mega-manual.sed file, which processes the links in that
large HTML document. I have removed them.
Authored-by: Aurelio Jargas <aurelio@aurelio.net>
(From yocto-docs rev: 640a52c74750b9148116171cfa8a2cca388f6d7c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual set, I made sure that "OpenEmbedded-Core"
and "OE-Core" appear with the hyphens.
(From yocto-docs rev: 1f570df3eccb74b9e2e60af94c0e0dd48e1489e9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "OpenEmbedded-Core" rather than "OpenEmbedded Core" in the
text. The term as also fixed to reflect this change. Also,
use of the phrase "OpenEmbedded-Core project" or "OE-Core project"
is not desirable. Changing project to version.
(From yocto-docs rev: ec226fcd92847c96ea2e11d34513b597a35c9825)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original QS (yocto-project-qs) has been retired for the YP
sumo (2.5) release. The manual has been replaced with the
brief, two-page quick build document (brief-yoctoprojectqs).
I needed to create a new title figure for the manual to include
as part of the mega-manual (bypqs-title.png). The figure was
added to the figures folder of both the bried-yoctoprojectqs
and mega-manual book folders. I also removed the old
ypqs-title.png file that was used for the original QS.
Updated the stylesheet doc for the brief build to include a
style using the new title .PNG file.
Updated the mega-manual.xml file to include the brief doc and
exclude the original QS.
(From yocto-docs rev: aadec4a70fa89e4dcd233c337d8971c8353ee26d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated section IDs for the new Using Eclipse Neon
Appendix and Chapter 5 Working Within Eclipse (Oxygen).
Changed one link found in reference manual.
(From yocto-docs rev: d767007cf4151127063d1992a4e11e90437ae2da)
Signed-off-by: Kristi Rifenbark <kristi@buzzcollectivemarketing.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original Yocto Project Quick Start is being retired for the
YP 2.5 release (sumo). I have purged all the various references
from the YP manual set and replaced them with references to the
appropriate doc. The references were mainly into the YP
dev-manual for setting up the host or for building an image.
There were a few references into the new "Yocto Project Quick
Build" document for overviewing manual-type references.
(From yocto-docs rev: 11c0ab693962f16f87f1e21f33dd5c6ca6a6f895)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This information was merged into the BitBake User Manual.
(From yocto-docs rev: eb68d4429aed652e4ca10c1ab55d3a815d453d6f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For conserving disk space during builds, I added a new section
that tells how to add "rm_work" to your local.conf file.
This information was part of the original YP Quick Start
and was not carried forward into the new brief build
document.
(From yocto-docs rev: 719d70587d908390a134559472d57ce7fced6aae)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the title to "Yocto Project Quick Build" from "My First
Yocto Project Build", which sound a bit too much like "My first
little Pony."
(From yocto-docs rev: c797590d3cd341a9c492c7af49a927e1d241184e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latter has been deprecated.
(From yocto-docs rev: 1f0f423f89d7727aace64b2cfe0b11b0a4bbc7e3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the discussion on this variable in the BeagleBone
example. Took out an older "Xloader" term.
Also, fixed a link to the u-boot.inc file.
(From yocto-docs rev: 5a41c6e7ed6ee6432f7f2c15642f5f98460a1a83)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tip box shows how to ure the mirrors for the most recent
release and the most recent release minus one. I set these
up to use variables rather than hardcoded releases.
(From yocto-docs rev: ad47deb8ac1fc074ed3fdf3627609ac3ab38e92b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Useful for providing the release version of the current
release minus one.
(From yocto-docs rev: c5970a4c52a333156336a564ae488b808a73a880)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a bullet item to the Getting Started manual in the
"Where to Go Next" section.
(From yocto-docs rev: ce4edc521d19b3c8025e950061cc962ca88fa29e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did some re-wording to account for when the user does a web
search for a manual and the search returns an ancient version
of the manual. Many times the user is oblivious of this fact
and is trying to use a version of the docs that don't come close
to matching the version of the YP.
(From yocto-docs rev: 1cbe06cefda2b35584a8365564e01888d229d0b3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created detailed example using the BeagleBone BSP.
(From yocto-docs rev: 7701dc2bd94ae7ee3e4aee37ac97174ad445d286)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a final paragraph that provides some cross-referencing to
the sections that describe how to use Wic and to the Wic
reference chapter.
Also, shortened the DOC info line.
(From yocto-docs rev: 4ba5d0119caa3696187537f5b4cc9c64ca00e205)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a link to the "getty" term.
(From yocto-docs rev: d21fe1ea33353e15c135af7fc302ffe636310541)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added minor edits to clarify that we are talking about an
image type.
(From yocto-docs rev: 14c906aa539d127c88d71d7fb3e628fc225cbd52)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the explanation of the layer.conf file. I am going
to use this section as the definitive section that explains
the layer.conf file.
(From yocto-docs rev: 4c70c7467f0ca5cf2346ef8d10bde437b971d2d2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information to the list of variables used in the
layer.conf file to specify LAYERSERIES_COMPAT.
(From yocto-docs rev: c41ff41e75b654d5d7df8c2a1e83ba5525490285)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For step 3 on creating the layer, I put in wording to make sure
the user does not create a layer in the cloned poky directory.
(From yocto-docs rev: 1a0d1d0c0cdfa77c6df005d0294d11a02ca3770c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Best practices dictate that the use not create a layer in the
poky repo. So, I updated the example to move the user to a
top-level directory first and then create the layer.
(From yocto-docs rev: 81ab8b0f393f90785880aec7685c4c431cb7ad87)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new variable description in the glossary. This
variable is used in the layer.conf file and needed to be
documented.
(From yocto-docs rev: 5c514c0e90ca920bdf183b1f9449a06b906235ca)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many examples in the YP set use the latest release code name
as part of a list and then the "minus-1" code name is literally
typed in. I think it is time to have a couple ENTITY variables
in poky.ent that will fill in the last release for these examples.
(From yocto-docs rev: 7421d6a0ae85503b205537f08cfd23e28747d835)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #12417]
Deleted the appendix.xml file.
Updated the mega manual .xml file to not include
the Mars appendix file.
Updated the sdk-manual.xml file to not include the
Mars appendix file.
(From yocto-docs rev: e7752c3db1aec8d5143e78aab44ec5afaaaf9c76)
Signed-off-by: Kristi Rifenbark <kristi@buzzcollectivemarketing.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This string is now being presented as "bsp_root_name" in the YP
manual set. A BSP name is essentially "meta-bsp_root_name".
It was being presented in the manual set as "meta-bsp_name",
which is not technically correct.
(From yocto-docs rev: 9ad25836b2b3ca79aa3430be014871f50205cf9e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the way we refer to a BSP name. It is really
"meta-<bsp_root_name>" rather than "meta-<bsp_name>". The
name is the whole string and not just the root name.
Also added a tip on ordering the layers in the BBLAYERS
variable in the bblayers.conf file. Order is important.
(From yocto-docs rev: 9c56238295f5631c496377616ea98b860253e6f7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a layer that contains other layers
(From yocto-docs rev: 0cd1881c18e8a63d5f2f078b03fe4e89fd9c75b5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reality dictates that the YP does not treat layer naming consistently.
Layers are talked about as the "meta-whatever" layer and never the
"whatever" layer. However, the tooling sometimes appends or uses
just the "whatever" part of the layer name. A good example is the
meta-yocto-bsp configuration file. All the variables in there use
just the root name of a layer's name. In the manuals, I had been
distinguishing the layer name as just the "whatever" part sans
"meta-". I talked about the convention of using "meta-" in front
of layer names, etc. Well, this is confusing in light of how everyone
says a layer's name is "meta-whatever". So, I fixed all this up.
(From yocto-docs rev: 79e52f6ccf4246fc69a460ce9d3a4a18720a9442)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split this section into two sections: one for creating the layer
using bitbake-layers create-layer and one for adding the layer
to bblayers.conf using bitbake-layers add-layer.
Needed to update some references in the yocto-project-qs and
kernel-dev manuals.
(From yocto-docs rev: 741a29b0cbeaaeaa0ac9155036ace2623938aee3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #12419]
In the section on runtime package management, I created a "Tip"
box to tell the user about using a location for the package
index information outside of the "deploy" area of the hosts
build directory.
(From yocto-docs rev: 2aee814d3d3ed4052fca332693d5416907ae640e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
