1, In bitbake.conf
PKGR ?= "${PR}${EXTENDPRAUTO}"
EXTENDPKGV ?= "${EXTENDPKGEVER}${PKGV}-${PKGR}"
RDEPENDS_${PN}-dev = "${PN} (= ${EXTENDPKGV})"
2, When PR Server is enabled, EXTENDPRAUTO is not none which means PKGR and PR
don't have the same value.
3, When multilib is enabled, RDEPENDS_${PN}-dev is not expanded correctly
which uses PR rather than PKGR in the versioned dependency string.
4, Make sure PKGR rather than PR in version string when do_package_rpm.
[YOCTO #4050]
(From OE-Core rev: e915c0ac6faab824207f0a0227a1f2ac422b3d4f)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the upgrade to version 199 the location for systemd-analyze has change
this caused the systemd-analyze package to be empty and the binary was
shipped with the systemd package instead.
(From OE-Core rev: 088c499815a6a856ece2bf0d54d6d8f1e7b431fb)
Signed-off-by: Erik Botö <erik.boto@pelagicore.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple words that were fat-fingered and fixed them.
(From yocto-docs rev: 593fd043f350bbce302c3de7dce0ab4bdbd2f247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Realized that a better organization of the sub-sections could
be applied. Pulled the last two sections up a level.
(From yocto-docs rev: d196db9bf1f88aa0677453396abdd61bf5d724dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Applied changes per Jessica Zhang's feedback from the bug
entry in Bugzilla. I added some missing steps and also
tried to make the section stick with one example throughout.
(From yocto-docs rev: f995006a90a3646c92d54dc96a8fceae4de758eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This prepend was cding to ${S}, which then breaks base_do_compile as it assumes
it's in ${B}. The cd is pointless as all of the operations use absolute paths,
so remove it.
The result of this was that base_do_compile was failing to find the makefiles,
so the compilation happened in do_install.
(From OE-Core rev: ac3a8ce0b672d1488c9074bde1a1d062e0c5fd33)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If multiple package managers are installed in the image, they will
overwrite each other's run-postinsts script, resulting in postinstalls
not beeing run at all at first boot.
What this patch does:
* checks whether opkg/dpks/rpm is actually used to install
the packages and, only after, creates the run-postinsts script;
* brings dpkg recipe in sync with opkg: moves the script creation from
do_install to postinstall;
* move creation of run-postinsts script (rpm-postinsts recipe) to the
postinstall scriptlet in order to better control the creation of the
script according to the package manager used;
[YOCTO #4231]
[YOCTO #4179]
(From OE-Core rev: d7fd56df0a4954954d6d0764ae06beb869e6b99a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move ${PN}-ptest to start of PACKAGES to ensure all ptest files are
packaged in the -ptest package.
Add QA exclusions to insane.bbclass to ensure -ptest packages can contain
any files they need.
Disable ptest for native packages.
Don't emit errors on missing _ptest functions.
(From OE-Core rev: 01bea4ef932e46eb2fcc8b4be7ff5e2b5b2a0978)
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include release 12.3 of openSUSE as sanity tested. For each of the provided
qemu targets I have been able to "bitbake world" and "runqemu".
(From meta-yocto rev: d78b34d29e6b38ecabdf5b63b02863a1448edb78)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The routerstationpro has a 16mb flash which the kernel image should
fit into. The default build type for vmlinux then should be a
stripped vmlinux.
Use KERNEL_IMAGE_STRIP_EXTRA_SECTIONS to do this.
Reverts commit 9cd3816e4d, which causes:
RedBoot> load -v vlm-boards/19256/kernel
Using default protocol (TFTP)
Unrecognized image type: 0x0
[YOCTO 3515]
[YOCTO 4220]
(From meta-yocto rev: 832f94f9de9c7745256935a522044d37d30794aa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow recipes to specify sections to be stripped from the kernel output
using KERNEL_IMAGE_STRIP_EXTRA_SECTIONS. For example:
KERNEL_IMAGE_STRIP_EXTRA_SECTIONS = ".comment .unwanted"
The kernel output is stripped in place.
Since the toolchain does not give indication when the specified sections
are absent, we read the sections first and make this report by issuing a
warning to the developer.
The toolchain by default strips the image with the -s option (even
when -s is not specified):
-s --strip-all Remove all symbol and relocation information
For example, these sections are always removed:
.debug_aranges
.debug_info
.debug_abbrev
.debug_line
.debug_frame
.debug_str
.debug_loc
.debug_ranges
.symtab
.strtab
In addition to these, the sections listed in
KERNEL_IMAGE_STRIP_EXTRA_SECTIONS will also be removed.
Only stripping of vmlinux (elf) is supported at this time. A warning
will be given if the image type is not vmlinux.
Stripping the image could also be done in the kernel, but that would
only work for linux-yocto based kernels, so it's not the route we
decided to go.
[YOCTO 3515]
(From OE-Core rev: 5f6d33b05b4e7883f2728ca812cb5386d1e36989)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Variables defined in .scc files have two purposes:
- Documentation in the meta-series
- Variables that can be tested in sub sections and other features
The second part of this functionality was broken when fixing configuration
for tiny/small systems. As a result, arch tests were failing and configs were
dropped. This restores the existing functionality.
(From OE-Core rev: 4170e458e0f700319f4e1023c0c6c2d803449566)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto-3.8 recipes to fix two issues:
1) qemumips boot
This is fixed by:
Revert "Input: i8042-io - fix up region handling on MIPS"
And by disabling ftrace for qemumips boards
2) netfilter options being dropped
When KERNEL_EXTRA_FEATURES was introduced, and allowed to be
inhibited, the variable was only applied to qemux86 machines. It
should be applied ot all machine types (unless inhibited), so we
restore that functionality.
(From OE-Core rev: 0271dec64591c4d91933b3a8db875a374a63640b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to fix and illegal instruction that is seen
when launching X with USB pointing devices.
meta/qemumips: build USB_UHCI_HCD into the kernel
When booting qemumips and USB_UHCI_HCD built as a module, the following
trace is seen, and then prevents X from starting:
qemumips user.warn kernel: Call Trace:
qemumips user.warn kernel: [<c0028000>] uhci_check_bandwidth+0x0/0x160 [uhci_hcd]
qemumips user.warn kernel: [<c002e08c>] uhci_urb_enqueue+0xba4/0xc48 [uhci_hcd]
qemumips user.warn kernel: [<8058092c>] usb_hcd_submit_urb+0xdc/0x848
qemumips user.warn kernel: [<805b8fbc>] wacom_open+0x44/0x8c
qemumips user.warn kernel: [<805a1990>] input_open_device+0xac/0xec
qemumips user.warn kernel: [<805a8cec>] evdev_open+0x188/0x1bc
qemumips user.warn kernel: [<802331d8>] chrdev_open+0xc8/0x1c4
qemumips user.warn kernel: [<8022b338>] do_dentry_open+0x248/0x2e4
qemumips user.warn kernel: [<8022b418>] finish_open+0x44/0x68
qemumips user.warn kernel: [<8023e51c>] do_last.isra.29+0x2c0/0xcbc
qemumips user.warn kernel: [<8023efd8>] path_openat+0xc0/0x52c
qemumips user.warn kernel: [<8023f840>] do_filp_open+0x4c/0xbc
qemumips user.warn kernel: [<8022cc3c>] do_sys_open+0x128/0x20c
qemumips user.warn kernel: [<8010c07c>] stack_done+0x20/0x44
qemumips user.warn kernel: Code: (Bad address in epc)
qemumips user.warn kernel: ---[ end trace 8a48c6046870f8c2 ]---
Building the module into the kernel fixes the problem, but the root
cause is still under investigation. The pipelines around jumps to
module addresses seem to be triggering invalid instructions.
(From OE-Core rev: b7b7ebe57bd6fd248e80be0b7e517a3ceb7cfd11)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
