Log a note when applying a taint to a task signature (e.g. when using
the -f or -C command line options) so that the user knows this has been
done.
(Bitbake rev: 0fd960fdea83874eedb541cbc2920257e0f3fb81)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -f is specified, force dependent tasks to be re-run next time. This
works by changing the force behaviour so that instead of deleting the
task's stamp, we write a "taint" file into the stamps directory, which
will alter the taskhash randomly and thus trigger the task to re-run
next time we evaluate whether or not that should be done as well as
influencing the taskhashes of any dependent tasks so that they are
similarly re-triggered. As a bonus because we write this file as
<stamp file name>.taskname.taint, the existing code which deletes the
stamp files in OE's do_clean will already handle removing it.
This means you can now do the following:
bitbake somepackage
[ change the source code in the package's WORKDIR ]
bitbake -c compile -f somepackage
bitbake somepackage
and the result will be that all of the tasks that depend on do_compile
(do_install, do_package, etc.) will be re-run in the last step.
Note that to operate in the manner described above you need full hashing
enabled (i.e. BB_SIGNATURE_HANDLER must be set to a signature handler
that inherits from BasicHash). If this is not the case, -f will just
delete the stamp for the specified task as it did before.
This fix is required for [YOCTO #2615] and [YOCTO #2256].
(Bitbake rev: f7b55a94226f9acd985f87946e26d01bd86a35bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Proxy settings were not properly saved between Hob runs. This
fix is mostly a backport of code in master.
[YOCTO #3024]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Error messages that use arguments need to be formatted properly, or we
don't get the full message. Use a formatter to do this when an error
occurs.
Partial fix for [YOCTO #2983].
(Bitbake rev: 6783538884adecd914909a9ab4ca73c27575f3ad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our lack of markup escaping was causing invalid markup, leading to the
error dialog being blank. Use the glib markup escaping function provided
by PyGTK+ to do this properly and avoid the blank error dialogs.
Partial fix for [YOCTO #2983].
(Bitbake rev: 563ea5233a5ab1629c51e802d04280692f96c596)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a recent regression where we see the following additional error
after an error occurs during parsing:
ERROR: Command execution failed: Traceback (most recent call last):
File "/home/paul/poky/poky/bitbake/lib/bb/command.py", line 84, in runAsyncCommand
self.cooker.updateCache()
File "/home/paul/poky/poky/bitbake/lib/bb/cooker.py", line 1202, in updateCache
if not self.parser.parse_next():
File "/home/paul/poky/poky/bitbake/lib/bb/cooker.py", line 1672, in parse_next
self.virtuals += len(result)
UnboundLocalError: local variable 'result' referenced before assignment
(Bitbake rev: 1ae0181ba49ccfcb2d889de5dd1d8912b9e49157)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From: Matthew McClintock <msm@freescale.com>
When merging fetch2 improvements from master into denzil, there
were too many dependencies to pull in the entire ChecksumError
class, so this patch removes references to ChecksumError for
compatability.
Fixes this issue:
NameError: global name 'ChecksumError' is not defined
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
When we build the mirror urls, its possible an error will occur. If it
does, it should just mean we don't attempt this mirror url. The current
code actually aborts *all* the mirrors, not just the failed url.
This patch catches and logs the exception allowing things to continue.
(Bitbake rev: c35cbd1a1403865cf4f59ec88e1881669868103c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we only consider one pass through the mirror list. This doesn't
catch cases where for example you might want to setup a mirror of a mirror
and allow multiple redirection. There is no reason we can't support this
and the patch loops through the list recursively now.
As a safeguard, it will stop if any duplicate urls are found, hence
avoiding circular dependency looping.
(From Poky rev: 0ec0a4412865e54495c07beea1ced8355da58073)
(Bitbake rev: e585730e931e6abdb15ba8a3849c5fd22845b891)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With support for things like git:// -> git:// urls, we need to be
more explicity about the mirrortarball check since we need to fall
through to the following code in other cases.
(From Poky rev: 28e858cd6f7509468ef3e527a86820b9e06044db)
(Bitbake rev: a2459f5ca2f517964287f9a7c666a6856434e631)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are no functionality changes in this change
(From Poky rev: d222ebb7c75d74fde4fd04ea6feb27e10a862bae)
(Bitbake rev: db62e109cc36380ff8b8918628c9dea14ac9afbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Conflicts:
bitbake/lib/bb/fetch2/__init__.py
Signed-off-by: Khem Raj <kraj@juniper.net>
This assists with build reproducuility. It also avoids errors if cwd
happens not to exist when we call into the fetcher. That situation
would be unusual but I hit it with the unit tests.
(From Poky rev: 86517af9e066c2da1d580fa66b7c7f0340f3403e)
(Bitbake rev: b886c6c15a58643e06ca5ad7a3ff1f7766e4f48c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to show a friendlier error message that does not bury the
actual sanity error in our typical preamble about disabling sanity
checks, use a separate event to indicate that sanity checks failed.
This change is intended to work together with the related change to
sanity.bbclass in OE-Core.
Fixes [YOCTO #2336].
(Bitbake rev: 24b631acdaa143a4de39c6e1328849660c66f219)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 2142]
Force to exit HOB when hob is parsing recipes, the bitbake doesn't stop.
It hangs on function BitBakeServerConnection::terminate in file
server/process.py:
else:
self.procserver.join()
It is waiting for the children process quit.
In stage of parse recipes BBCooker spawns Parser processes as many as
cpu numbers. When quit the Parser processes they make their internal
Queue to call cancel_join_thread() to avoid block but don't work at
this time.
So force to terminate the Parser processes.
(Bitbake rev: bebef58b21bdff7a3ee1fa2449b7df19144f26fd)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After parsing recipes, Hob will populate recipes and packages, which is probably
time exhaused. So, this patch is to adjust the progress bar and ensure 100% is
set if and only if all populations are done.
The patch also fixes "weird 18 second delay when parsing recipes" on build appliance.
Because Hob is doing something, but the progress bar shows 100% and wait there.
[Yocto #2341]
(Bitbake rev: 2c4a21dc8a588c8cf05549ddd9734731a46bea10)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When case about No browser, such as running in 'Build Appliance', user can't open
the hyper link, so add this work around for user. (Checking the browser is avaiable
or not is hard by different system and browser type)
[YOCTO #2340]
(Bitbake rev: 02cc701869bceb2d0e11fe3cf51fb0582cda01b0)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the arrow icon refresh so fast as the go backward by illusion, so adjust it slow.
[YOCTO #2335]
(Bitbake rev: ac4a8885fafdc0d1e79831334ead9a8ddb6e2472)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may meet certain command failure during build time, for example,
out of memory. In this case, we need to clear the "building" status.
This fixes [YOCTO #2371]
(Bitbake rev: 283dbbbf5d34adb4c9e3aa87e3925fdebe21ff42)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In original scheme, sanity check is part of the parsing process. If a
sanity check fails, it means the parsing is failed and values in Hob
GUI may not correct.
With this commit, Hob will actively issue sanity_check() after the
parsing is completed.
This fixes [YOCTO #2361]
(Bitbake rev: 36968815dcc91759eeacb308bf4b294af416eee5)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user changed the proxy setting, we will reparse configuration because
it may need sanity check.
(Bitbake rev: 0be54917cd88ea8f110027a7840ac69a411fd589)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To ensure the users configuration is sanity tested enable the sanity
checks after the GUI has started but before any parsing is done.
(Bitbake rev: 244ce2b900ae6cecbeeccfe2056e61c132476261)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are a number of DeprecationWarnings within BitBake code which
bitbake itself filters out; bitbake-layers was not doing this, resulting
in a stream of warnings printed out when used with Python < 2.7 (these
warnings default to disabled on version 2.7 and above.)
(Bitbake rev: 0a2378237f07eb1c812e2308e64b7d70781e2b39)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current description is empty. This adds a default
description for hob's dummy_image.
(Bitbake rev: 68a65e5eeeb01d78444f1e5b5d1bb7b21c9d0b2c)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user stops a build, we need to firstly set the button insensitive and
then hide it. This ensures the button's init status is "insensitive" in
next build.
(Bitbake rev: ea37272ccc28d6e24b48286e5c4c3edbad1d57cd)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally the upper value for image size and extra size is 1024M, which
is relatively small. Enlarge it to 64GB.
Besides, fix tooltip for toolchain build.
(Bitbake rev: 99f01305b4c2253567a1a13a33339b1755a86e6d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For config hash, we put the keys in structure of "set()", which is not
order sensitive. Therefore when calculating the md5 value for config
hash, we need to identify the order of the keys.
(Bitbake rev: 0f1b142a3f6b8125bf023c2e5ec269618869abf7)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In package selection page, treeview cell data callback function not cover the 'else' case, so parent item will render the pervious value.
(Bitbake rev: 98694c1dbc276cc151f393db67bfd43442da28ba)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'binb' popup window should be "set transient for" the main application
window which they were spawned from.
(Bitbake rev: a6f45b23851e22c7793d9a534fd197316bb5b9b8)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In those systems which had use gtk overlay-scrollbar feature,such as
Ubuntu 11.10, we have the issue with the multiple overlaped scrollbar in
'Recipe View' notebook or 'Package View' notebook, this patch is going to
fix it.
(Bitbake rev: f6be78d8a45dc501c2bbe1e1a399a342dabe11d5)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit fixes the contents in imagedetailsscreen, which lacks some
kind of image types, e.x., iso and hddimg.
(Bitbake rev: 4505097f4f7834857a6086d5dabeedb24b49cf4c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a wrapper with exception handling to call self.server.runCommand() safely.
Again, add exception handling to load_template() and save_template()
(Bitbake rev: cb07a027d3366ed30b0f7e5e85d08c6fda4eb5b9)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit merges some functionalities together and avoid unnecessary
signal handling. This can help to speed up the Hob startup.
(Bitbake rev: e5a6eb4f007bf270f2fddc814eb856da46e20eee)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If NoProvider event is received, we will handle it in runningbuild
module and send notification to Hob instance, avoiding stepping into the
final page with no image built out.
This fixes [YOCTO #2249]
(Bitbake rev: 067bc46a0fbc542fef1fcaa406ad3737a4c5a55a)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reset user recipe list and package list after the user changes the settings and
triggers recipe reparsing.
This is to continue to fix the bug [Yocto #2255]
[Yocto #2255]
(Bitbake rev: 95f4e9dc351f67442844ff52f90fc154fa95ba95)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to remember layers and settings between Hob sessions, which
includes:
- Put some variables for the build details screen from Configuration to
Parameters because they are not actually for build but for show
- We create a dummy Configuration instance and a dummy Parameters instance
in __init__ of builder
- The two instances will be assigned the real values by
update_configuration_parameters() after parsing (in the event callback)
- When it is the first time to launch Hob in a build directory, nothing is
remembered since everything is fresh.
- The feature is implemented with templates, and based on the hook for Hob.
- When the user changes the layers or the settings, a default template file
is saved into ".hob/".
- Later on, the layers and the settings are remembered by loading the default
template automatically.
(Bitbake rev: f7c874ab930b9e7f95e79d0e84e62eb9b967f566)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally we use hardcoded "build" as the default task. This commit
fixes it by using BB_DEFAULT_TASK.
This fixes [YOCTO #2283]
(Bitbake rev: 7540f8d446345559ea9b47f4ff71d203ffdfaf8d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user selected a base image and didn't customize it, Hob will still
build the selected image instead of hob-image.
This fixes [YOCTO #2253]
(Bitbake rev: a74a6a033e66a0ae7b47c84d842bdd54066c69a1)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we use the template file name as the image name. This commit
changes to use the original selected image into template file.
(Bitbake rev: 14a9da66fe08d181f45853c52e0c9f14773070a8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the requried packages task-core-standalone-sdk-target(-dbg) for
building toolchain.
Fixed bug [YOCTO #2274]
(Bitbake rev: 434fdb3913cc78e2e9cdeede4c4fa7f1c8ef8892)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The version compare function vercmp() was not exatcly conforming to
Debian rules, e.g. it reported 'r1' > 'r1.1' but the Debian rules says
'r1' < 'r1.1'; it didn't support the "~" either.
Modified the vercmp() to meet Debian rules, so that it's compatible to
the rules used in opkg.
This part of the buf fixing of [YOCTO #2233].
(Bitbake rev: 97b610c54c60b5a40fa7f6a09fa23ce17b38f93a)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When Hob is busy with generating data, exiting Hob is not allowed.
That should be reasonable because at that time the mouse cursor is not a pointer.
If users want to exit, they can click "Stop" first and then do exit.
That is also a walkaround for [Yocto #2142]
(Bitbake rev: ad7f6bf3c7c4c15d546781aaefdaf03f00193f7c)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make Hob's specific variable settings take effect, we add a Hob
config hook at the end of parsing for each configuration file, and in
the hook function, Hob will set its own variables to the data store.
This fixes:
[YOCTO #2210]
[YOCTO #2254]
(Bitbake rev: 0ec7d1bbfd2e09ae60f99e6134b20ffd1d9145b1)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make the UI settings take effect, we need to hook at the end of each
config file parsing and set UI specific values.
(Bitbake rev: f54e733c7863110896f43900d9e4e791602f9d65)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
