Our project pages have 4 tabs: builds, configuration, import layer and
new custom image. Even though we treat the 'configuration' as the
default tab, it comes second after the builds tab.
That's a bit strange: the default tab should be the first one listed.
This patch changes the tab order to put 'configuration' first.
(Bitbake rev: ccb90019489c2c324c2a5a60295e02280a2ec18f)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing breadcrumb does not always provide a link to the project
configuration page. When you are in the build history pages, you must go
back to the builds information first, and from there access the project
configuration. That feels very long.
Change the breadcrumb so that the project name item always provides a
link to the project configuration.
(Bitbake rev: 9910f3f292d35fc91215d550c5f123dcf18ab35d)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The placeholder text in the form where you name your new custom images
didn't display fully. This patch fixes the styles so that the text shows
properly. It also changes the text itself to make it a bit shorter.
[YOCTO #9122]
(Bitbake rev: 9df802182b0b96295b148a1681c2265e72d8306b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although the support for building more than one release and how we
handle the build directories is the subject of lively discussion, we all
seem to agree on removing the ability to change the release of a
project. The feature is currently not working but exposed to users,
which is not a happy state of affairs.
This patch comments out the controls that give access to the release
changing functionality to hide them from users, but does not touch
anything else. Once all moving pieces start to settle down, we can make
a final decision regarding this feature, and clean up the code
accordingly.
[YOCTO #8917]
(Bitbake rev: 3a8c6f7155517cd61a160595b81e7bed84ba4eaf)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Display always the first target in alphabetical order to match what we
do in the breadcrumbs and the build dashboard heading
* Remove the extra space between the '+' and the additional number of
targets
* Make sure the tooltip with the full target list takes the Bootstrap
tooltip styles
* Replace the word 'targets' in the tooltip with 'recipes', since that's
how we call build targets everywhere else in Toaster
(Bitbake rev: 3b8747d0af4b9164e973940ed97751c951e74110)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pages in the build data section of Toaster showed different
breadcrumbs: in some pages the machine was displayed, but not in others.
For builds with more than one target, some pages showed the first
alphabetical target (the correct behaviour), others didn't.
This patch removes the inconsistencies, showing exactly the same
breacrumb across all pages in the section.
The patch also removes the extra space between the '+' and the number of
targets when the builds have more than one target.
Remove an unneeded debug message
(Bitbake rev: 9cdbb543311b6f4a8a88c27fc157d998242444ee)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add link to the last successful build if there is one and add
conditionals for the ancillary recipe metadata.
(Bitbake rev: 4660aaf1c6775270f8f3d0afbb7fa2ee7a2a1563)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the dependencies popover just show direct dependency in the list
rather than recommends, conflicts etc
(Bitbake rev: e69b00532b011327bc2495a6fb52cfe98f0f897d)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the states of the packages in the package selection UI to reflect
whether it's likely that 1st level dependencies for the package will be
also added.
(Bitbake rev: 119569d83c3fb1d1bd162624819b3f9c63a791c4)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of defining this as a string it's sufficiently large enough to
warrant its own file.
(Bitbake rev: 6b39423fe5a3ed30289a8b303329a5725f7d273b)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the packages associated with a custom image recipe are
shown in the customrecipe editing page, locale packages are
shown in the same way as all other packages. This gives the false
impression that these packages can be removed, when in fact
they are automatically added due to the IMAGE_LINGUAS build
variable.
Modify the customrecipe page so that locale packages cannot be
removed, and provide some help text explaining why.
[YOCTO #8927]
(Bitbake rev: b2208e53c00a67a7d0345e7378e6806b8ae40fb4)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The progress updater for the recent builds section makes a JSON
call to the project view URL to get progress for each build.
However, conversion of the builds pages to ToasterTable broke this,
as the JSON response no longer contained the data necessary to
populate the progress bars.
Move the recent builds query to the Build model, so that it is
accessible to the ToasterTables using it ("project builds" and
"all builds"), as well as to the "project" view.
Modify the code in the recent builds template to use the slightly
different objects returned by the recent builds query on Build.
(Bitbake rev: 5189252635ddc7b90c9a43aaed9f196c31e1dcad)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poll the server for the project build progress value. This is something
that will need to be re-done once we have a proper API for this on the
server side.
[YOCTO 8328]
(Bitbake rev: ec467e43c39eadf02412b89db10c09ed78a5a9f5)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure we send the current list of layers to the customise button to
be able to know whether it should be set as an add layer button or a
customise button on the New custom image page.
(Bitbake rev: 5ddb35c98b609d85f97d482b54cabe3a2812afe6)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds some basic package dependency hint modals when you add and
remove a package. It also makes sure that if the CustomImageRecipe has
no current included packages that we go and check this with the server
to see if a relevant build has taken place which will provide this
information.
[YOCTO #8082]
(Bitbake rev: 418f5509e74d46d36a8eb966a245083006e5f4ba)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This page provides the details of recipes, showing their packages and
additional metadata. It also allows you to build the recipe or customise
the recipe if it is an image recipe.
[YOCTO #8070]
(Bitbake rev: b6023619397f679791b7eff1faac06f4246133ce)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the modal template and JS out of the newcustomimage page so that it
can also be used by the image details page.
(Bitbake rev: c310bc6bab1a33124906dd57b3c63462a773ff25)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Continuation of the work on the custom image recipe page, this brings
in:
- Basic notification of having added/removed a package.
- Connect up Build button
- Download recipe feature
- No packages states
- Project bread crumb
- Display additional recipe metadata
- Update accessors for recipe object inheritance changes
[YOCTO #8082]
(Bitbake rev: a656756a9255ec5882686ce9563d17f2eb3136e3)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a Packages table for use as the image details page.
Change the SelectPackagesTable table to inherit from the Packages table.
Remove the need for a separate view by adding the additional template
context items to the Table's page context.
(Bitbake rev: 336b1d8369d9e86ece78b63cb0e140e653216011)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ID was omitted from the "edit columns" button on the
"projects", "all builds" and "project builds" tables when they
were converted to ToasterTable. This caused the QA tests to fail.
Reinstate the ID so the tests can identify the "edit columns" button
correctly.
[YOCTO #9051]
(Bitbake rev: 934b82badcf063c8ff252d806c2fb019f7a2e55f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an artifact download is requested, Toaster goes through a
convoluted series of conditions to decide which file to push
to the response. In the case of build artifact downloads for
command line builds, this caused an ugly exception, as command
line builds don't have a build request.
To simplify and catch more corner cases, remove the code which
fetches files via the build environment (we only support the local
build environment anyway). Then push all requests along a single
path, catching any missing file errors, missing object errors
or poorly-formed URLs in a single except clause which always returns
a valid response.
Also modify the text on the "unavailable artifact" page so it
says that the artifact doesn't exist, rather than it "no longer"
exists (exceptions may occur because an invalid artifact was
requested, rather than an artifact which was removed).
[YOCTO #7603]
(Bitbake rev: 24e20db55c2933de5e58ca754b8fd5b624f47820)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in views.py for setting up the template context for
old non-ToasterTable views is no longer necessary, as this
is now implemented in tables.py.
The template files for these views have also been removed.
[YOCTO #8738]
(Bitbake rev: 2b5a13afb068c85466436914d8d4ac3b31bc5c02)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a range filter action had an empty from/to field, the range
filter could still be applied. This was confusing, as an invalid
filter range caused all records to display, even though a filter
appeared to have been applied (by the highlighted state of
the filter button).
Change the state of the "Apply" button, disabling it if the radio
button for a range filter action is selected but the range is
incomplete (from or to field is empty).
When a non-range filter is selected, the "Apply" button always
enable the "Apply" button.
[YOCTO #8738]
(Bitbake rev: 168184b28165d7aa354b9092b5986f91c58d550d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the "today" and "yesterday" filters to the started_on
and completed_on columns in the builds table.
During this work, some minor adjustments were made to the
behaviour of the builds table:
* Amend filter action variable names so they're more succinct.
* Retain order in which actions are added to a filter, as this
ordering is used in the UI when displaying the filter actions.
* Always show the table chrome, otherwise it's not possible
to edit the columns shown until there are 10 or more results.
* Because date range searches may return no results, make sure
that the search bar and "show all results" link are visible
when the query returns no results.
[YOCTO #8738]
(Bitbake rev: f17cfa009e58833e0e55884fa04de8abd522b6bc)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement the completed_on and started_on filtering for
builds.
Also separate the name of a filter ("filter" in the querystring)
from its value ("filter_value" in the querystring). This enables
filtering to be defined in the querystring more intuitively,
and also makes it easier to add other types of filter (e.g.
by day).
[YOCTO #8738]
(Bitbake rev: d47c32e88c2d4a423f4d94d49759e557f425a539)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent builds section was disabled while converting the
all builds page to ToasterTable.
Re-enable the recent builds area and add the data it requires
to the ToasterTable context.
[YOCTO #8738]
(Bitbake rev: d6df4545bd134a23c9bd3cd1ba3b61ddb26545e4)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For better long-term maintainability, use ToasterTable instead
of Django template and view code to display the all builds page.
NB the builds.html template has been left in, as this will
otherwise cause conflicts when merging the new theme.
[YOCTO #8738]
(Bitbake rev: e0590fc8103afeb4c5e613a826057555c8193d59)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The projects page uses the old approach for showing tables,
which means a template for each table. This means that applying
changes to ToasterTable (which is used for most tables) has
no effect on the layout, styling and behaviour for these older
tables, and requires additional duplicated effort.
Move the projects page to use ToasterTable instead, to remove
the duplication of effort.
[YOCTO #8738]
(Bitbake rev: df56a35bc71639457329c4b58839976c5ee40106)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Showed '<dependency> satisfied via <provider>' text and
help tooltip for the reverse build dependencies provided
through 'PROVIDES' in the 'Reverse build dependencies' tab.
[YOCTO #6169]
(Bitbake rev: c7bb98e2e2111790ded86087b13c8b49462d6b75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Showed '<dependency> satisfied via <provider>' text and
help tooltip for the build dependencies provided through
'PROVIDES' in the 'Build dependencies' tab.
[YOCTO #6169]
(Bitbake rev: de77e338fe70341fe98561e2e40b534f5c88db10)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed SDKMACHINE from predefined set of variables
for the project as it causes bitbake build error:
SDKMACHINE is set, but SDK_ARCH has not been changed as a result
This variable does not need to be predefined as it's not used by
toaster.
It's still possible to specify it in project configuration
if needed. SDK_ARCH variable should be set too to avoid above
mentioned build failure.
(Bitbake rev: a6ab2a38ab666376b4a5e796d3a88929e8cbfb22)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As both modes can be used at the same time we can't have any
difference in UI between modes.
Removed all conditional statements that used BUILD_MODE.
(Bitbake rev: 4ce1559c2558bd0fd278ff02a1a93bec03c4156b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current layers information wasn't being passed to the template for
the Select/Add button for the Compatible machines filter.
(Bitbake rev: 559102984d3f62a7675899e058166bdf4d552c46)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'all builds' page was missing the download icon next to the outcome
icon, which allows you to download a build log from the 'all builds' page.
This patch brings it back. It also adds a check in the project builds page
to make sure the download icon only appears if the build generates a cooker
log, since builds that fail at the build request stage do not generate a
cooker log.
(Bitbake rev: 50d7ffa697764d84d96f26a3ae58a9dacde7b31e)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The project created notifications and the 'Choosea recipe to build' link in
the project page are linking to the software recipes table. Changes them to
link to the image recipes table instead, which is bound to be more useful.
(Bitbake rev: 10e1fbee0d79dbbf15b89ebc155bb2c0092a71f2)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of putting the DATABASE_URL as part of the command for launching
the bitbake observer process set it as part of environment.
This fixes two issues 1. Where the value isn't quoted and therefore will be
interpreted in the shell and 2. Anyone being able to see the value of
DATABASE_URL in the process tree.
[YOCTO #8669]
(Bitbake rev: 832a8523067606b180c02f0d1544e8a23219bb08)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the project in the template context rather than ajax request to get
the number of ended builds.
(Bitbake rev: 1f6bfa876b17a600fc83c789af8aaa2639a463b2)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our title tags are all over the place, and have no relation to the page
content. This commit adds a meaningful title tag to each Toaster page.
(Bitbake rev: 1ab8827d684a19a70f3b788aed2327bf30edffe2)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user is redirected to the all builds page or all projects
page from the landing page, regardless of mode.
In build mode, this makes sense; but in analysis mode, we are
restricting the view to just the cli builds project. This means
that "all projects" and "all builds" only contains items relating
to this one project.
Modify the landing page so it redirects to the project builds page
for the cli builds project when not in build mode. Also remove
navigation elements which are irrelevant when not in build mode.
[YOCTO #8514]
(Bitbake rev: ae754655fa1bc5168f43e8821773e7b7b9440a5d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "new build" and "new project" buttons are irrelevant in
analysis mode, as you can't start a build or a project.
Hide these buttons if not in BUILD_MODE.
[YOCTO #8514]
(Bitbake rev: b1858653c22eb6d51fc23f75ccad69b76523eb41)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The same landing page is shown for both analysis and
build modes. This means that users in analysis mode can see
options which are not available or broken in that mode.
Modify the landing page template to show a simple "run a build"
message if the user is in analysis mode and has no builds yet.
Also clean up the landing page HTML, because the indentation was
a mess and the HTML was invalid.
[YOCTO #8514]
(Bitbake rev: 86b4a10cc817abb5e3e63360dc8b3c550337f17c)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "New build" button should only be displayed if there are
user-generated projects, not if there is only the command-line
builds project. (Toaster can't run builds on behalf of the
command-line builds project.)
The "New build" form should also display as if no project has
been set (i.e. show the project and recipe text entries).
Add a variable which tracks the number of non-command-line projects,
then use this to hide the button when appropriate.
Also track whether the current project is the default one, and
use this to add extra conditions to when the "New build" text
entries are shown.
[YOCTO #8231]
(Bitbake rev: 07e7bc29a7d976941eeae997f78a25ed6edddfc8)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some errors in the HTML template didn't show up until
they were rendering command line builds.
One useless conditional was lingering in another template.
Clean up these issues to display the latest builds section
correctly.
(Bitbake rev: c781d6be94a25f942946d3a406e07791385e4596)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
