Several recipes have S pointing at a directory that does not exist.
Set S in these cases to somethig valid making the metadata and
recipe behaviour more consistent.
Tweak one of the QA test diff offsets to match the changed recipe.
(From OE-Core rev: 22f1f5849a9a3bf287dbe8933546e52e39ddc86e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only real reason for oe-local-files was to support S = WORKDIR. With changes to
drop support for that, it makes sense to simplify devtool and to try and make both
the code and the processes/workflows simpler.
This patch drops support for S = WORKDIR, removes oe-local-files and then updates
the test cases to match this new situation.
At the code level, we assume we can always now track code changes using git and
that things committed into git are handled as patches (as before) but delta against
HEAD is saved as specific file level changes to the recipe.
One test is disabled as it is no longer approproate. It is being keped until we can
make WORKDIR != UNPACKDIR at which point it should be revisited.
(From OE-Core rev: ce8190c519052fed10b5233697b69a75868db45a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace references of WORKDIR with UNPACKDIR where it makes sense to do
so in preparation for changing the default value of UNPACKDIR.
(From OE-Core rev: 1f18b9a512800860d5153d89eb82b56388efad6f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarly to centos 8, centos 9 doesn't support the render device we need
for this test.
(From OE-Core rev: c2be3afabf84f287c90b61ae2509728a6634fb8f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes the debuginfod selftest fails due to a timeout, because it
spends too long scanning a huge deploy directory that due to what tests
were ran previously can contain 30K packages.
The test only needs a subset of the feed, so use the new localpkgfeed
class to construct a minimal feed before running the test.
[ YOCTO #14937 ]
(From OE-Core rev: 855376f518b28248ccd82ef5b2e89e6a8c970542)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If usrmerge is in DISTRO_FEATURES, assumptions in one of the tests would
fail. Improve the test so it works in both cases.
(From OE-Core rev: afa211746a2aa1993a54cc5a5e1937679341da8e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If usrmerge is in DISTRO_FEATURES, assumptions in one of the tests would
fail. Improve the test so it works in both cases.
(From OE-Core rev: 68a27d307a7042e242c49cf3d069469f40e09902)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit ab6d3e3d64
from poky repository.
The previous reverted commit was a workaround. The fix
"oeqa/selftest/devtool: fix _test_devtool_add_git_url"
tackle the issue. So, the workaround is not needed anymore.
(From OE-Core rev: 731f47ecfd8ad6558aac629806810789c623986b)
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is a follow-up to the bug#15466.
As a reminder, the bug was about devtool’s submodule detection
checking for HEAD when a version is being passed.
As Vincent Kriek pointed out:
the --version that is being passed to devtool is only used for
setting the PV value in the recipe. To take into account the tag,
we add --srcrev to the command:
devtool add --srcrev v3.1.0 --version v3.1.0 mbedtls git://git@github.com/ARMmbed/mbedtls.git;protocol=https
Changes to _test_devtool_add_git_url have been made to take
into account the srcrev. srcrev will be passed as an optional
parameter because the test_devtool_add_git_style1
does not need the srcrev contrary to test_devtool_add_git_style2
Fixes [YOCTO #15466]
(From OE-Core rev: a8686f3641e4407dee3d807898ffd620e2732b78)
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reported-by: Alexandre Truong <alexandre.truong@smile.fr>
Suggested-by: Vincent Kriek <vincent@coelebs.dev>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't have a test to check if we can correctly devtool update-recipe/finish
into another layer. So update the existing test_devtool_update_recipe_local_files
to also check the updates into another layer.
(From OE-Core rev: bd44c895d36e246a25c7a6e40bf9f4089dc7a297)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If testtools and/or subunit modules are not found we get the following backtrace
(example for testtools):
NOTE: Starting bitbake server...
Traceback (most recent call last):
File "<..>/poky/scripts/oe-selftest", line 60, in
<module>
ret = main()
File "<..>/poky/scripts/oe-selftest", line 47, in main
results = args.func(logger, args)
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 391, in run
rc = self._internal_run(logger, args)
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 377, in _internal_run
rc = self.tc.runTests(**self.tc_kwargs['run'])
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 161, in runTests
return super(OESelftestTestContext, self).runTests(processes, skips)
File "<..>/poky/meta/lib/oeqa/core/context.py", line
91, in runTests
result = self.runner.run(self.prepareSuite(self.suites, processes))
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 154, in prepareSuite
from oeqa.core.utils.concurrencytest import ConcurrentTestSuite
File
"<..>/poky/meta/lib/oeqa/core/utils/concurrencytest.py",
line 22, in <module>
import testtools
ModuleNotFoundError: No module named 'testtools'
Fix this by adding a custom callback on -j/--num-processes parameter to
check testtools and subunit modules. Fallback to serial testing if
missing. This strategy is already used in sdk/context.py
(From OE-Core rev: 35284404473b2c2d9f69594582868ed66ef3525e)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The problem is the following:
AssertionError: 'gitsm://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master' != 'git://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master'
Mbedlts made changes to their repository, adding a sub-module, thus the
assert triggers an error with the url:
git://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master
456a54da8e
was the upstream change.
To fix the issue, the url has been changed to:
gitsm://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master
(From OE-Core rev: 9ac737fbe05c85ec8333b396ce2f89de6654916f)
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under some load conditions, the result event can come back before the
command complete event. If that happens, the code would hang
indefinitely.
Rework the code to wait for both events and avoid the hang.
(From OE-Core rev: 8cfc94a4404c54bc73eab9f98d9da1f84c2135ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds to run_test_sstate_creation so that it also tests
that sstate directories don't accidentally pickup umask permissions
from the user upon creation.
[RP: Python style tweaking]
(From OE-Core rev: 7d6eb828e97ad3f27d94efdccd920fb2aef36743)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust selftest to git-add the directory with newly added patches,
as the new minicom recipe has no default patches, and thus no directory
with them (and the selftest assumed it does).
(From OE-Core rev: 1fb2aa3f242ef20f8edfb518164b629258a04dd4)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since go-1.21 GOPROXY needs to be set explicitly, otherwise it fails with:
- GOPROXY list is not the empty string, but contains no entries
This fixes the selftest
(From OE-Core rev: c491d967858c01fead21495f44f1a9f8cdf8e833)
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the GDB related tests. Verify GDB finds the correct source
files.
(From OE-Core rev: 67eed460c0bf18d23f2c9180f195417895acfd55)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a test for 13904's fix by creating a convoluted set of recipes
with USERADD_DEPENDS in non-alpha order.
(From OE-Core rev: bfff81195cb9ba2493e366022470b2e0051d8071)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a new base-files bbappend was added to meta-poky, it causes selftest
failures. Whilst this isn't ideal, workaround that issue for now since
the append is being added for security visibility and changing the tests
to support this more generically looks invasive.
(From OE-Core rev: 7cf85204f0943bf741ffce5c4105340197c714df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rust testsuite was redirecting command output to a file, which made it
hard to debug failure cases since the logs were not available to print to
the console.
Rework the code so it uses the existing popen logging and hence allows us
to improve the error logging situation and make debugging failures easier.
(From OE-Core rev: ac82dc43b8151ed34c4ad51e9ab7f4a612990486)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support to detect the "mesonpy" build-backend for recipetool create.
* Add oe-selftest case for creating a recipe for "siphash24" from pypi.
https://pypi.org/project/siphash24/
This is by far the simplest recipe using the mesonpy build backend.
Upstream does not provide LICENSE file(s) and we do not detect the
LICENSE so don't check for that result in the test. Likewise, upstream
does not define HOMEPAGE, so skip that result.
(From OE-Core rev: 256749322671d2f4ea994db671d73c4de10e1723)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python 2 is gone and we don't need the abstraction now, drop the remaining usage
of this variable.
The definition in python3-dir.bbclass is left for now for other layers.
(From OE-Core rev: b566b1e32c7993d1ab7795562f648e52ce186a70)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old way of keeping track of the filenames for the patches that
correspond to the commits was to add a special comment line to the end
of the commit message, e.g., "%% original patch: <filename>", using a
temporary git hook. This method had some drawbacks, e.g.:
* It caused problems if one wanted to push the commits upstream as the
comment line had to be manually removed.
* The comment line would end up in patches if someone used git
format-path rather than devtool finish to generate the patches.
* The comment line could interfere with global Git hooks used to
validate the format of the Git commit message.
* When regenerating patches with `devtool finish --force-patch-refresh`,
the process typically resulted in adding empty lines to the end of the
commit messages in the updated patches.
A better way of keeping track of the patch filenames is to use Git
notes. This way the commit messages remain unaffected, but the
information is still shown when, e.g., doing `git log`. A special Git
notes space, refs/notes/devtool, is used to not intefere with the
default Git notes. It is configured to be shown in, e.g., `git log` and
to survive rewrites (i.e., `git commit --amend` and `git rebase`).
Since there is no longer any need for a temporary Git hook, the code
that manipulated the .git/hooks directory has also been removed. To
avoid potential problems due to global Git hooks, --no-verify was added
to the `git commit` command.
To not cause troubles for those who have done `devtool modify` for a
recipe with the old solution and then do `devtool finish` with the new
solution, the code will fall back to look for the old strings in the
commit message if no Git note can be found.
While not technically motivated like above, the way to keep track of
ignored commits is also changed to use Git notes to avoid having
different methods to store similar information.
(From OE-Core rev: f5e6183b9557477bef74024a587de0bfcc2b7c0d)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a commit is marked with "%% ignore" it means it is used by devtool to
keep track of changes to the source code that are not the result of
running do_patch(). These changes need to actually be ignored when
extracting the patches as they typically make no sense as actual patches
in a recipe.
This also adds a new test for oe-selftest that verifies that there are
no patches generated from ignored commits.
(From OE-Core rev: c3d43de7e54189bf09fbe8e87ddb976e42ebf531)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This includes a simple test which creates a layer setup using
custom references, and subsequently modifies the resulting layers
setup using a different custom reference.
(From OE-Core rev: 36701e78cf239261ad21cf58db2934c3c8a5e3e6)
Signed-off-by: Jermain Horsman <jermain.horsman@nedap.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is another piece of the puzzle in setting up builds from nothing
without having to write custom scripts or use external tools.
After layers have been fetched and placed into their respective locations by
oe-setup-layers, one would surely want to proceed to the actual build, and here's how:
1. Without arguments the tool reads available layers
from .oe-layers.json file (written out by oe-setup-layers or a fallback under scripts/),
prints what templates it has found, and asks the user to select one, as seen below.
This will land the user in a shell ready to run bitbake:
=============================================
alex@Zen2:/srv/work/alex$ ./setup-build
Available build configurations:
1. alex-configuration-gadget
This configuration will set up a build for the purposes of supporting gadget.
2. alex-configuration-gizmo
This configuration allows building a gizmo.
3. poky-default
This is the default build configuration for the Poky reference distribution.
Re-run with 'list -v' to see additional information.
Please choose a configuration by its number: 1
Running: TEMPLATECONF=/srv/work/alex/meta-alex/conf/templates/configuration-gadget . /srv/work/alex/poky/oe-init-build-env /srv/work/alex/build-alex-configuration-gadget && /bin/bash
You had no conf/local.conf file. This configuration file has therefore been
created for you from /srv/work/alex/meta-alex/conf/templates/configuration-gadget/local.conf.sample
You may wish to edit it to, for example, select a different MACHINE (target
hardware).
You had no conf/bblayers.conf file. This configuration file has therefore been
created for you from /srv/work/alex/meta-alex/conf/templates/configuration-gadget/bblayers.conf.sample
To add additional metadata layers into your configuration please add entries
to conf/bblayers.conf.
The Yocto Project has extensive documentation about OE including a reference
manual which can be found at:
https://docs.yoctoproject.org
For more information about OpenEmbedded see the website:
https://www.openembedded.org/
This configuration will set up a build for the purposes of supporting gadget.
Please refer to meta-alex/README for additional details and available bitbake targets.
==============================================
2. It is also possible to list available configurations without selecting one using
'setup-build list' or to select and setup one non-interactively with 'setup-build setup'.
3. The full set of command line options is:
$ ./setup-build --help
usage: setup-build [-h] [--layerlist LAYERLIST] {list,setup} ...
A script that discovers available build configurations and sets up a build environment based on one of them. Run without arguments to choose one interactively.
positional arguments:
{list,setup}
list List available configurations
setup Set up a build environment and open a shell session with it, ready to run builds.
optional arguments:
-h, --help show this help message and exit
--layerlist LAYERLIST
Where to look for available layers (as written out by setup-layers script) (default is /srv/work/alex/.oe-layers.json).
$ ./setup-build list --help
usage: setup-build list [-h] [-v]
optional arguments:
-h, --help show this help message and exit
-v Print detailed information and usage notes for each available build configuration.
$ ./setup-build setup --help
usage: setup-build setup [-h] [-c configuration_name] [-b build_path] [--no-shell]
optional arguments:
-h, --help show this help message and exit
-c configuration_name
Use a build configuration configuration_name to set up a build environment (run this script with 'list' to see what is available)
-b build_path Set up a build directory in build_path (run this script with 'list -v' to see where it would be by default)
--no-shell Create a build directory but do not start a shell session with the build environment from it.
4. There's an an added hint in oe-setup-layers about how to proceed (as it is really not user-friendly
to fetch the layer repos successfully and then exit without a word), and a symlink to the script
from the top level layer checkout directory.
5. The selftest to check layer setup has been adjusted to run a basic check for template
discovery and build setup. The revision of poky to be cloned has been bumped to 4.1,
as that's the first version with a default template in a standard location.
(From OE-Core rev: 1360b64e88cda7dddfb0eca6a64f70c13dafb890)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is beneficial for setting up builds, as this list can be used
to determine reliably where the actual layers are, and discover
available configurations from them.
Also adjust the selftest to check the presence of that file rather
than any specific layer in a hardcoded location.
Sample output (paths are written relative to the file for relocatability
and ease of reading):
{
"layers": [
"meta-openembedded/meta-filesystems",
"meta-openembedded/meta-gnome",
"meta-openembedded/meta-initramfs",
"meta-openembedded/meta-multimedia",
"meta-openembedded/meta-networking",
"meta-openembedded/meta-oe",
"meta-openembedded/meta-perl",
"meta-openembedded/meta-python",
"meta-openembedded/meta-webserver",
"meta-openembedded/meta-xfce",
"poky/bitbake/lib/layerindexlib/tests/testdata/layer1",
"poky/bitbake/lib/layerindexlib/tests/testdata/layer2",
"poky/bitbake/lib/layerindexlib/tests/testdata/layer3",
"poky/bitbake/lib/layerindexlib/tests/testdata/layer4",
"poky/meta-poky",
"poky/meta-selftest",
"poky/meta-skeleton",
"poky/meta-yocto-bsp",
"poky/meta"
],
"version": "1.0"
}
(From OE-Core rev: 82743f4f767f8016564be0d9d6c0d8fe9e067740)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rust tests nearly pass for qemurisv64, add the remaining ones to the
exclusion list so it matches everythig else in exlcuding all the know
to break cases.
(From OE-Core rev: 1d6c6e4418c9865a4aeae627e0f130b2181d3657)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some oe-selftests for the new devtool ide-sdk plugin. Most of the
workflows are covered.
Many thanks to Enguerrand de Ribaucourt for testing and bug fixing.
(From OE-Core rev: 458fa66b117ccad690720931f912de09655691dc)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 interprets string literals as Unicode strings, and therefore
\s is treated as an escaped Unicode character which is not correct.
Declaring the RegEx pattern as a raw string instead of unicode is
required for Python 3.
(From OE-Core rev: 9002850f0c2e409d3bc629e36bb360b96326bb64)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On hosts with git defaulting to main branch the following exception
occures:
File .../buildhistory.py", line 99, in test_compare_dict_blobs_default
blob1 = self.repo.heads.master.commit.tree.blobs[0]
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/git/util.py", line 1114, in __getattr__
return list.__getattribute__(self, attr)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
AttributeError: 'IterableList' object has no attribute 'master'
Support main and master branch for these test cases.
Note: setting the default branch with --initial-branch requires git
version 2.28 or later. Some of the still supported host distros do not
provide this feature yet.
(From OE-Core rev: 7df99843d8f31d8e0c2872ff625f4a5abf28f740)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool's pyproject.toml parsing needs tomllib (python 3.11+) or
tomli (not a hard dependency), so is prone to failing depending on the
host configuration.
Downgrade the Meson release used for the checks to 0.52.1, which was the
last release before moving to pyproject.toml.
(From OE-Core rev: 6dfe573d83687e5431841f062442b54b9fa22ff3)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the test fails, it simply says the file doesn't exist. This isn't helpful
so improve the output.
(From OE-Core rev: ea6b42485696c6981157a28da2dc9a67f2f3f9c6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As more tests start to need this codeblock, factor it into a common function.
(From OE-Core rev: c154eba9aa8e7d780ce2c5a18cbc0756a30850d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
test_recipetool_create_github and test_recipetool_create_github_tarball
fail because the old meson version used by these tests cases does not
run on Python 3.12. The issue is in the dependencies.py which comes with
meson:
ERROR: build/tmp/work/recipetool-3z4osyl7/source/git/mesonbuild/
dependencies.py:777: SyntaxWarning: invalid escape sequence '\.'
Use meson 1.3.1 (what is currently also used on master) as a reference
for these tests.
With this version of meson, recipetool creates recipes named
meson_git.bb or meson_1.3.1.bb. Since this looks more reasonable than
e.g. python3-meson_git.bb the test gets adapted.
(From OE-Core rev: 7374a8a2810a6cf027bfefefe87691a3529123ff)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TestCase.assertRaisesRegexp was renamed to assertRaisesRegex in Python
3.2, so rename to fix a warning during test execution.
(From OE-Core rev: 6df44a4b29487bf8ef51bb5ba6467a4056b749cc)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is another source of the test slowness: for some configurations
(building x86 on x86) the cache items are pre-populated in other
builds. For others (building 32 bit x86 on arm), they're not. Without
this step, the test would build them, write them to a private
sstate, and then throw it away.
The code is un-pythonic: it follows the style of the rest of the test,
and fixing that is perhaps for some other time.
With these two changes the notoriously slow test_sstate_cache_management_script_using_machine
takes just under 6 minutes, on an arm worker:
https://autobuilder.yoctoproject.org/typhoon/#/builders/127/builds/2820/steps/13/logs/stdio
(From OE-Core rev: b685c955289bf4d7d70bd0f4c1530b2bf13a30a6)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is no longer necessary as selftest enforces buildhistory disabling nowadays.
It is also a significant contributor to slowness of the tests:
they work by setting up private sstate and retaining autobuilder sstate
as a read-only mirror, and if the needed objects aren't in that
mirror (as particularly seen on arm hosts), then the whole build
stars from scratch - and then is thrown away.
(From OE-Core rev: 208c8bc0e168cd2fd5884882b892862c6303fdfe)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This helps in getting it building with newer architectures like riscv32
since it has upgraded gnulib over 2.14 which has the needed fixes.
Drop the -fno-common workaround as it is already applied to cpio
drop --disable-maintainer-mode
Fixes
configure: WARNING: unrecognized options: --disable-maintainer-mode
(From OE-Core rev: 18d303497089d3a7a893ee0eec5b0f0c78cca06d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With changes to gcc-runtime around improving debugging, python modules
are needed but this pulls in bash which breaks the tests.
Add an exclusion to the no-gplv3 include file to handle this.
(From OE-Core rev: 803060fa4e8fe98ac8f987b80162110d06788946)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a no-gplv3.inc file based upon knowledge currently encoded into one
of the selftests.
There is a risk that people try and take this idea too far, or have unrealistic
expectations. That said, it would be better to collect this knowledge together
in one location rather than handling it piecemeal.
Therefore move the configuration information from the test into a common
incude file.
(From OE-Core rev: fb822fb2029c69934cf43073f95b396c2d60298e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the output was cluttered with irrelevant lines that were
describing missing, but excepted cache objects.
(From OE-Core rev: 146e6e88b6c9400eb2c7442a319a6240b00ecaa2)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test case to ensure the following error does not happen again for
'devtool modify -n'.
Traceback (most recent call last):
File "/buildarea2/chenqi/poky/scripts/devtool", line 349, in <module>
ret = main()
File "/buildarea2/chenqi/poky/scripts/devtool", line 336, in main
ret = args.func(args, config, basepath, workspace)
File "/buildarea2/chenqi/poky/scripts/lib/devtool/standard.py", line 924, in modify
if not initial_revs["."]:
KeyError: '.'
(From OE-Core rev: 2c2ba5f9497462a190b849a69d8440149f80582a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Enable rust oe-selftest.
* Include the dependent patches for rust oe-selftest in
meta/recipes-devtools/rust/rust-source.inc
* Disable rust oe-selftest for mips32 target (Rust upstream has classified it into tier 3 target,
for which the Rust project does not build or test automatically) as it is unstable with rust tests.
https://doc.rust-lang.org/nightly/rustc/platform-support.html#tier-3
* The testing is done on arm32, arm64, mips64, x86 and x86_64 targets on Ubuntu 22.04.
(From OE-Core rev: 8f3a2841540fc4779bbd7e11d910edcdc8b47683)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To avoid overlap and redundancy of rust tests, remove the test cases whose
parent dir is already excluded.
Tests which are failing from below dirs are removed as these dirs are
already present in exclude list
tests/run-make
tests/rustdoc
tests/mir-opt
tests/ui-fulldeps
(From OE-Core rev: 58a7f3efa9e31e2c7b90e6490f3e51f388e6a7ce)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add newly failing tests cases in the exclude list for
rust oe-selftest.
(From OE-Core rev: 50119ddaaa810ad71063691fb1cc30cf8c8456c8)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
