They differ at times because one is set from the db_cv_path_mkdir and the other is
found during config time for the host (/usr/bin/mkdir), in the macros we should just
use __mkdir for the __mkdir_p variant.
[YOCTO #4452]
(From OE-Core master rev: 2ab642056829aef675f75c05b9ac5bbc43c87cd1)
(From OE-Core rev: ca4cdb6de52eae47454953a1cacde6a222b0e472)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some distros have newer makeinfo which does not go well with
anything below gcc 4.8, this fix avoids regenerating info files
(From OE-Core master rev: 50ac2ed5299e2b47b2f3fd9c9cde9d733d2f8d9b)
(From OE-Core rev: 913d847694d24f356c34dba8e815934d761047d0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we didn't build libgomp then we won't have installed anything into
${infodir} or ${libdir}/gcc/${TARGET_SYS}/${BINV}/finclude. Check
whether those directories exist before trying to remove them, else we
will lose.
(From OE-Core master rev: 507e14ecdc5b4ff2ee7f1128d9f30c2948e10d5a)
(From OE-Core rev: 78879d1583d082e0d08253ebefbd8c2a288db01c)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently a load of scripts in ${bindir} start with:
which is undesireable, this patch fixes that.
(From OE-Core master rev: e3634ec359a71c9858698cb597d23c05b1184d2e)
(From OE-Core rev: 5a77c73c48d6fab7abe853c01e262c7019e4a03a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wrapper script is called mainly from intercept hooks and allarch
packages postinstalls. When multilib is used, the qemuwrapper script
points to the binary that matches the MACHINE architecture.
For example: if MACHINE=qemux86_64 and we activate multilib, then the
postinstalls for lib32 packages would call qemu-x86_64 with 32 bit
binaries and they would certainly fail.
This patch adds just a fallback method if the exit code of the previous
qemu call corresponds to "Invalid ELF image for this architecture"
error. This will allow us to have all postinstalls run on host.
(From OE-Core master rev: 0c6ddb84043f0f917543cdaf4814efc15cd0273f)
(From OE-Core rev: 4a9365a72ab45da33d31dc2f2575a58d20467c9e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't add the first line of /etc/rpm/platform to the list of patterns
to match when computing an arch score, use it just for getting
information about the platform (cpu/vendor/os).
[YOCTO #3864]
(From OE-Core master rev: 9263a2192ccf8ca513cbf7f2f88473e267e6b945)
(From OE-Core rev: 057217ddece60609a97e32a4143618d2f2b42db0)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstall needs to reference $D, not ${D} which would get expanded
by bitbake. This allows postinsts to run correctly on the target system.
(From OE-Core rev: 6573685a5374034df065c41bbe71c7ac49e4b9a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In each of these cases allarch is used where the package in question has a
dependency on things which are not allach and change when MACHINE is changed.
This leads to a rebuild of the package each time MACHINE is switched and
the sstate checksum changes. The dependencies in question are not suited
be being marked as ABISAFE.
(From OE-Core rev: 087a680429efa713a98fbb89f927b046fe07f87c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
task packages were renamed to use packagegroup so fix this reference.
(From OE-Core rev: bcd68f11e479e8a3a95793ab2ed65202c0f71d84)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wrapper script doesn't need a compile or any of the default system
dependencies so lets inhibit them. This also stops the script
being rebuild every time the toolchain changes.
(From OE-Core rev: 7f72562d274dd2c37ce9262bb7fb8a8a6a9a37df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This doesn't work when the initscripts package is not installed (e.g.
when using systemd only) and is not even needed.
(From OE-Core rev: 6c972598c6da17fbec7a4582eb593c31f4283275)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes
In file included from /home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/libfdt.h:55:0,
from /home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/work/x86_64-linux/qemu-native/1.4.0-r0/qemu-1.4.0/hw/arm/../../device_tree.c:28:
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:58:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:59:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:60:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:61:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:62:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:63:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:64:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:67:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:70:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:73:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:77:2: error: unknown type name 'fdt64_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:78:2: error: unknown type name 'fdt64_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:82:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:87:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:88:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:89:2: error: unknown type name 'fdt32_t'
(From OE-Core rev: dfb0c2cf9799d084a76aa92e243c743d7ff05db8)
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes cannot depend on the value of IMAGE_FEATURES; in this case the
result is do_package task signatures changing every time IMAGE_FEATURES
changes, causing a large number of task re-executions. The
implementation of the log capturing really needs to be changed to
capture these in a different place and possibly not even conditional
upon IMAGE_FEATURES at all, but this will be invasive at this point in
the development cycle. For now, remove the variable dependencies to fix
the immediate problem.
Fixes [YOCTO #4246].
(From OE-Core rev: b4fbe4095de447ef4e426128bafaf8a292fa63e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If multiple package managers are installed in the image, they will
overwrite each other's run-postinsts script, resulting in postinstalls
not beeing run at all at first boot.
What this patch does:
* checks whether opkg/dpks/rpm is actually used to install
the packages and, only after, creates the run-postinsts script;
* brings dpkg recipe in sync with opkg: moves the script creation from
do_install to postinstall;
* move creation of run-postinsts script (rpm-postinsts recipe) to the
postinstall scriptlet in order to better control the creation of the
script according to the package manager used;
[YOCTO #4231]
[YOCTO #4179]
(From OE-Core rev: d7fd56df0a4954954d6d0764ae06beb869e6b99a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* If /etc/rpm-postinsts doesn't exist, don't error
* If deleting the script errors, don't bother printing it (this will
always happen if the root filesystem is read-only)
(From OE-Core rev: f787b8302ed61bdaf1767473b856f31fe5bba28e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not only was the variable reference in this line broken, but it wasn't
going to work anyway - we install the script directly into /etc/rcS.d
and not into /etc/init.d, so the code in update-rc.d.bbclass couldn't
find anything there. This resulted in a postinstall script for
rpm-postinsts being created in /etc/rpm-postinsts which can't work when
the root filesystem is read-only. To simplify things just remove the use
of update-rc.d.bbclass since we don't really need the added complexity
here.
Fixes [YOCTO #4222].
(From OE-Core rev: d196d08acafe599c16a7ac8e04121039b1216ba6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been seeing random sefgaults on a variety of architectures which appear
to be from an issue in qemu. The attached backport from upstream appears
to fix these.
[YOCTO #4216]
(From OE-Core rev: 55a22b7341571179d5e026d102953a6d9f2045bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When shutting down a core-image-lsb-sdk image, there is a lot of time spend stopping tcf-agent,
which slows down the whole process. The reason for this slowdown is the fact that it tries in a
loop to kill tcf-agent service by using killproc with the path of the executable and killproc
does not seem to available in lsb images. This patch fixes the issue by using "kill" instead of
"killproc".
[Yocto #3928]
(From OE-Core rev: 251361eb78176a04e3da00e0f77b7f3ff459d571)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make CHANNELSDIR in smart empty, since this causes host contamination issues
on some RPM-based hosts on which smart is already installed.
[YOCTO #3881]
(From OE-Core rev: 94e76a98b6cdafe9547630be159401ac1d8c5edd)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is needed only for 4.7 series, newer works fine with texinfo-5*
[YOCTO #3947]
(From OE-Core rev: d85d15972d78b5dda7a03dd273a64305f115282b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enables qemu to run images with video output without the need for vncviewer.
(From OE-Core rev: 30d5c1d5bc9a3931a09425962d980a3571dc56f3)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to import python-pprint on a minimal image, it reports that
the cStringIO python module is missing.
This is provided with python-io, so we add python-io as runtime
dependency.
The complete observed trace was:
Python 2.7.3 (default, Apr 4 2013, 07:45:36)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pprint
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/pprint.py", line 40, in <module>
from cStringIO import StringIO as _StringIO
ImportError: No module named cStringIO
(From OE-Core rev: abe7bf9992e298f1b53e790eee7b064a9e4e8589)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch allows for the run-postinsts script to be provided outside
of the rpm package itself and not pull in all the associated build
dependencies.
[YOCTO 4175]
(From OE-Core rev: 7841ee7041d04f11a3d879fb5bc60bb37de0a5c0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use newer version 0.8.90
* Updates to a BBCLASSEXTENDed recipe instead of just a native recipe
* Use PV in SRC_URI instead of hardcoded version number
In copying over the recipe from meta-oe, some minor changes were made:
* Preserve the existing OE-Core nativeperl wrapper usage
* Drop setting of S which is effectively the default value
(From OE-Core rev: ef24f8e7e6b91ad8e83942bd956e0d6ab0fc077b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's not part of sources, downloading some html from web is not better
check then using meta/files/common-licenses/EPL-1.0
* http://www.eclipse.org/org/documents/epl-v10.html was changed, plain
text looks the same, but html formating was changed (from MS Word
export to valid XHTML 1.0, changing checksums for this new html
would cause issues for people with old epl-v10.html already on
PREMIRROR, so lets just remove it.
(From OE-Core rev: 22bce79652fc753a7b5d536664b744e110b5775a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remake fails with errors during configure due to the out of tree build changes.
This ensures the configure commands run correctly on files in ${S}.
[YOCTO #4139]
(From OE-Core rev: 166c123bc0d121eeea39db71e63940fa2f8a3f7b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If package-management isn't in IMAGE_FEATURES, the postinstall handler
wasn't being installed. rpm needs to depend on this to ensure it does
get installed.
[YOCTO #4160]
(From OE-Core rev: 0c2778c36f521d019ab6ff0c458a1e117808d2e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we provide those files manually (i386_gendis, which is needed for
generating those files, has to be run on host and would fail when
compiling for other architectures), the mentioned compilation targets
in libcpu/ are not needed anymore.
This change will avoid a nasty race condition when running "make -jX
install" resulting in a zero size libebl_i386.so file. The issue happens
because, at "make install" time, the *_dis.h prerequisites will be newer
than the target itself, triggering a chain of recompilations while, in
the same time, the binary files are copied to the destination directory.
Hence, the zero sized file...
[YOCTO #4131]
(From OE-Core rev: a4ebe0f6efc8ed93521e75919f23821f59934c1f)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile in the package tries to set _FILE_OFFSET_BITS=64,
but we clobber that with our CFLAGS, so we add it in
the recipe.
[CQID: 409915]
(From OE-Core rev: ac904b9e10ec9641686bc35dcf200b9b855899b1)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Split out run-postinsts script into separated package, sometimes only the
postinsts script is required to run all postinsts scripts in /etc/rpm-postinsts/
instead of the whole rpm package.
2. Set ROOTFS_PKGMANAGE_BOOTSTRAP to rpm-postinsts
(From OE-Core rev: 056490ddbfdbb6cc6fa0d8ff8716d64819d6b16c)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes failures in builds where qemu fails with:
i586-poky-linux/qemu/1.4.0-r0/qemu-1.4.0/hw/arm/../../device_tree.c:28:20: fatal error: libfdt.h: No such file or directory
x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.7.2/ld: cannot find -lfdt
(From OE-Core rev: 1bf194f392bf14154e9cc2c33e117a52ef07f9e1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can cause issues building ppc64/eabi kernel. For details
see the patch header
(From OE-Core rev: 3c6622e22b0e1b2a8ceea6465ea84c6fb8299518)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ YOCTO #4089 ]
When constructing a new buildid, the items being hashed need to be
returned to their native endian. In the process we were munging
the sh_type field that we relied on to determine if a section was
loadable or not. The patch avoids this behavior by only modifying
a copy of the local endian data.
(From OE-Core rev: ac4d2d44c88cace8dbce0c8e7df3fd1f2ed244b4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On systems with dash as /bin/sh there were failures in do_package_write_ipk
due to bashisms in opkg-build. This newer revision contains a fix for this.
(From OE-Core rev: 0e185b86e80989a7904292f5866540a049cc4daa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
docbook-utils-native started to install frontends and backends in
wrong locations after this change. The absolute build and source
directories were being created in install locations and the recipes
using docbook-utils-native were complaining like dbus-java is saying
| jw: There is no frontend called
"/b/kraj/jlinux-next/poky/build/tmp-eglibc/sysroots/x86_64-linux/usr/share/sgml/docbook/utils-0.6.14/frontends/docbook".
| make: *** [CreateInterface.1] Error 2
| ERROR: oe_runmake failed
Rightly so because now they are installed under
/b/kraj/jlinux-next/poky/build/tmp-eglibc/sysroots/x86_64-linux/usr/share/sgml/docbook/utils-0.6.14/b/kraj/jlinux-next/poky/build/tmp-eglibc/work/x86_64-linux/docbook-utils-native/0.6.14-r3/
This patch fixes the install to be like it was but consider
the build and sourcedir split.
(From OE-Core rev: d60aec3f5b319f4583fa72a8357b9ddd3be62b1a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ YOCTO #4089 ]
On PPC and MIPS, there appears to be a condition that causes
debugedit to segfault. The segfault is related to a call into
the md5hash algorithm, an address of '0', and a size > 0 is passed
causing the access of the address to segv.
This workaround may prove to be the final fix, but it's currently
unclear what the actual cause of the 0 address is.
(From OE-Core rev: a046029eb96cd9307253937ceeadafaaa6d06dce)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having '${S}' in the for loop was causing the headers to be installed
into the wrong location. Move the 'S' to the install line.
(From OE-Core rev: 41c0241a810f0a97ddc98a834e717645e0047958)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recursive parameter is set to True, the regex for the first call to
do_split_packages matches any path under ${libdir}/perl/${PV}/auto/, and
the .debug directories contain .so files, so each one was getting picked
up as a package. Change the regex to disallow dots in the path beneath
auto/ and thus avoid the .debug directories.
Fixes [YOCTO #4048].
(From OE-Core rev: f8f6992fe0f29db1cc4df15b7449e06188052041)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Need to reference objects from ${B}.
(From OE-Core rev: 0610cf3ef864acc9ca98498b9810bcce0fbb935a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to run autogen.sh in the correct directory (${S}).
(From OE-Core rev: f352f9f25695635bbaad09774f02e66684971fc0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by adding missing path component.
(From OE-Core rev: fd86061e02bd175dcc5816db1cf15d705d338062)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
