Added tests that verify that git-lfs works with an actual
real git-lfs server. This was not previously the case because
the repo in the test was a simulation of git-lfs but not
a real git lfs repo.
The 2 added tests are almost the same but test that the
git lfs file checkout is successfult with or without the
lfs=1 flag. The lfs=1 URI parameter is a quirk that triggers
2 different code paths for git lfs.
lfs=1, when used on git lfs repositories triggers the git lfs
downloading at the fetch bare stage.
lfs query parameter unset triggers the git lfs downloading only
on checkout as an implicit behavior of git. This leads to possible
network access on the unpack stage and outside the DL_DIR.
lfs=0 actually disables git-lfs functionality even if supported.
(Bitbake rev: d2be7f7f652360f13cd66d0850f3e19ffe2afb0a)
Signed-off-by: Paulo Neves <paulo@myneves.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not restoring the mocked _find_git_lfs leads to other tests
failing.
(Bitbake rev: 70f848631450bd723c223227c21c60e815ee033d)
Signed-off-by: Paulo Neves <paulo@myneves.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While the parameter is not required it allows testing of possible
regression in fetcher code when parameter specified and mirrors are
used.
(Bitbake rev: 1a21918049091a6d77426dbf8868ffdc14ba1003)
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Basic test for mercurial functionality including PREMIRRORONLY with
disabled network
(Bitbake rev: c0e349a5fc92e9c90afc53800c7e83495393ff79)
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When obtaining latest upstream versions, the code needs
to check if the existing tarball is in a versioned directory
(e.g. component-name/x.y/component-name-x.y.z.tar.gz) and
if it is, it needs to first obtain the list of all
such versioned directories and then check all of them by going
one step up in the directory hierarchy.
Existing code was returning a correct match when the component
name did not have numbers, e.g. a check on 'source/epiphany/43/'
would return 43, but was stopping too soon when the component
name itself had numbers ('source/libxml2/2.10/' would return libxml2).
This change ensures the last match is taken instead of the first.
Also, adjust the fetcher tests to check that versioned directories
are correctly traversed in this case (e.g. the step to go one level
up is taken and a new tarball is discovered in a different versioned
directory).
(Bitbake rev: b6601be22c6d776327acdcd1fa931400f41ac786)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CVE-2022-39253 in git meant file:// urls within submodules were disabled. Add
a parameter to the commands in the tests to allow this to continue to work.
(Bitbake rev: 209f7ba352b60722830157054e3fc56cb9c693eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test for special characters in user and password to qualify
decodeurl() inspired by a bug report describing that '=' signs in a
password was problematic.
Add a second test to qualify decodeurl() as related to the change in
commit 628c4bf6c89b [fetch2/__init__: handle @ in package names].
Relates to [YOCTO #14476]
(Bitbake rev: ee04cf09c7022168c035affa654773652a49793e)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class and exception aim to test rare cases there deadlocks are
possible.
Can be used in context managers:
with Timeout(<value>):
do_deadlock()
(Bitbake rev: c5fcdd804d422f959a189b270d72123a50e74da6)
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A long time ago, we made DL_DIR a final fallback for the local fetcher.
Since then we added checksum support and task hashes and the world
has changed. There were warnings added some time ago if this fallback
triggers and it is now time to drop it entirely.
The original use case was for sstate however the sstate code now sets
FILESPATH correctly so DL_DIR is no longer needed.
There have been a few small bugs exposed by this change, missing mkdir
calls and some minor test issues that needed tweaks. In general this
simplifies and improves the fetcher code flow though.
This completes a cleanup that ensures local files are correctly covered
at parse time which ensures rebuilds and reparses happen at the right
times.
(Bitbake rev: 3e1444e536c71d3885ef6b9d428807163c309640)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the local fetcher was not able to find the file anywhere but it
was included in the SRC_URI for checksumming just make it a fatal
error. Ensure a list of searched locations is included too to match
the runtime error that would have resulted.
(Bitbake rev: 5e3b2ad90d9cd0f248b1cb740637caa24442d101)
Signed-off-by: Paulo Neves <ptsneves@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With PREMIRRORS set and BB_NO_NETWORK = "1" bitbake should not try to
fetch into non-initialized git directory if tarball is broken (or not in
gzip format)
[Yocto 14822]
(Bitbake rev: c9aaca3dd2dfdf4a291d6e1f6263037e0f54b4b6)
Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Existing test uses fake local repo for better performance. Adding
test which uses real (but still small) project hosted on
yoctoproject.org.
(Bitbake rev: 247f3536a691cdaa3f96768d1b42653b1da9ae84)
Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Function "git" is defined in super class FetcherTest already.
(Bitbake rev: bfed4ad2d50bcd635bb2ef99977e03e879fc79a2)
Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Basic test to cover functionality of BB_FETCH_PREMIRRORONLY using
local git repository. Local repository has been chosen to allow easy
manipulation with the repo to simulate behaviour reported in
[Yocto 13233]
(Bitbake rev: 773e0815ba0c2183afcb169cda525b7625e60e42)
Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the owner information in the mirror tarballs generated using
BB_GENERATE_MIRROR_TARBALLS="1". This is an extension of commit
0178ab83, which used the original pokybuild:user information, but failed
to clean up the numerical user and group ids. Now set the more canonical
values of oe:oe and 0:0.
(Bitbake rev: 37437115d3fb1a9f5d8ed7356a0fc01a408e4f8c)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
CC: Marek Vasut <marex@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using BB_GENERATE_MIRROR_TARBALLS="1" to generate mirror tarballs
of git repositories, they leaked local information: username, group and
time of the last fetch. Remove all these by setting fixed information:
* uname = pokybuild
* gname = users
* mtime = committer time of newest commit in repo
The username and group value were taken from the archives available on
the downloads.yoctoproject.org mirror. The modification time is chosen
so it still retains some relationship to the contents of the archive.
(Bitbake rev: 0178ab83e6312e97e528aa8c5e12105f5165d896)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Where a git url uses a tag instead of a full source revision, breakage
can currently occur in builds. Issues include:
* the revision being looked up in multiple tasks (fetch and unpack)
* the risk a different revision may be obtained in those tasks
* that some tasks may not be allowed to access the network
* that a revision may not be consistent throughout a given build
* rerunning a specific task may given inconsistent results
To fix this, stop the workers from cleaning out the source revision store. This
should only be done in the cooker itself (based on current policy).
Also, where the code "sees" an upstream access, mark the recipe as not to be
cached. The reparse re-triggers the upstream lookup by the server.
Add a test to ensure that if get_srcrev isn't called, the user is told they're
using a configuration that is known to break.
(Bitbake rev: 4b5eed1626709ef3dc06b32fd55d40a2a6edd179)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We started to require the branch parameter for git urls. This updates
the tests to match and quieten some noise.
(Bitbake rev: e5144887f2b6ae266f7b52151005619480e80ec6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously npm files that specify downloadfilename= in the SRC_URI
would be downloaded to the root of ${DL_DIR} rather than in the
${DL_DIR}/npm2 directory where all other npm files are downloaded.
This should make it simpler when setting up and configuring a
premirror with the downloaded npm packages.
(Bitbake rev: 73fa376d6502ab6f2cccfb25a1193d9b1c3c3bc8)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The solution implementated in commit 96c30007 (fetch2: fix
downloadfilename issue with premirror) missed two corner cases. The
first is if the basename of the original URI also appears somewhere
else in the replacement URI, in which case it would also be replaced.
The second is if the basename of the original URI partially matches
the basename of the replacement URI, in which case the inital part of
the basename from the replacement URI would be left behind.
The second case caused test_npm_premirrors_with_specified_filename to
fail.
The solution is to prefix the basename with a slash when matching to
avoid partial matches, and only replace the basename at the end of the
URI.
This also adds two test cases that test for these problems. Before
this they would give the following errors:
- ['file:///mirror/example/1.0.0/some-example-1.0.0.tgz;downloadfilename=some-example-1.0.0.tgz']
+ ['file:///mirror/some-example-1.0.0.tgz/1.0.0/some-example-1.0.0.tgz;downloadfilename=some-example-1.0.0.tgz']
? +++++ ++++++++++
- ['file:///mirror/some-example-1.0.0.tgz;downloadfilename=some-example-1.0.0.tgz']
+ ['file:///mirror/some-some-example-1.0.0.tgz;downloadfilename=some-example-1.0.0.tgz']
? +++++
(Bitbake rev: 5924c6f007519cd8ea6cc8b316814d17b43048ca)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two totally opposite use cases for how a premirror is
expected to behave in combination with specifying a downloadfilename=
parameter in the SRC_URI. On the one hand there is the expectation
that it works like any other mirror, which means the premirror is
expected to contain a file with the original name specified in the
SRC_URI. On the other hand there is the expectation that one can use
the artefacts downloaded by bitbake in ${DL_DIR} as a premirror, in
which case it is expected to contain a file with the name from the
downloadfilename= parameter.
The latter case has been how downloaded files have been handled until
commit 8a3ff9f3 (fetch2: fix premirror URI when downloadfilename
defined), where the fetcher was changed to store files as per the
first case. This is also when the test_npm_premirrors test case was
modified in commit 5ba191a0 (tests/fetch: add and fix npm tests) to
expect the first case.
The above change was later reverted in commit 96c30007 (fetch2: fix
downloadfilename issue with premirror). However the
test_npm_premirrors test case was not updated to match, and has been
failing ever since. This has probably gone unnoticed because the npm
related test cases require that npm is installed on the host.
This commit updates test_npm_premirrors to expect that premirrors use
the filenames specified by downloadfilename= as this matches the
current fetcher implementation and also is the most likely use case
for premirrors. It also tries to mimic how one typically might setup
the premirror directory by simply copying the download directory.
(Bitbake rev: 9e913ade70474aaeb928814d4763e7105569d63a)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This unifies the three separate implementations of git() from
GitMakeShallowTest, GitShallowTest and GitLfsTest into one
implementation in FetcherTest. It also makes use of this in
FetcherLocalTest and FetcherNetworkTest.
(Bitbake rev: 8c8b418c3e6f8ab2535ad405e8006ee1012f3484)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This changes:
test_foo .. skipped 'Network tests being skipped'
test_foo .. skipped 'npm not installed, tests being skipped'
to:
test_foo .. skipped 'network test'
test_foo .. skipped 'npm not installed'
to avoid double "skipped" in the output.
(Bitbake rev: e551328a4595c220b94ab5002d978ddb4deeebcf)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit 044fb04d (fetch2: Allow whitespace only mirror entries)
there is no need to separate the entries in mirror variables with
"\n".
(Bitbake rev: ed22b078aae25e804ca5edf062e2c905d3e49426)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both test_crate_url and test_crate_url_multi require Internet access.
(Bitbake rev: 34e9daed6a7f766bb6e27c7e02c94b545f4791d8)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This imports the crate fetcher from OE-Core to resolve various module issues
and adds some very very basic tests of that new fetcher.
(Bitbake rev: 1f06f326fa8b47e2a4dce756d57a9369a2225201)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These urls are no longer adding much to the test coverage but the intermittent
network issues connecting to them are painful. Drop the urls.
(Bitbake rev: bdf5739c5d831dc97a7d81568f94a0953c71017f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "" as a target for .replace() is a really bad idea as it duplicates the replacement
for every character in the string. Add a testcase which triggered this and correct the
code to return the correct result.
(Bitbake rev: 3af1ecf049d2eed56f6d319dc7df6eb4a3d4eebc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
vcs.pcre.org was a redirect to github which we use for subversion testing.
With the protocol changes at github and the removal of the redirect, use a
direct address for github.
(Bitbake rev: 6230ca71eb7eb2a6db162e28a01727d00af5299b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test to ensure that a parameter like protocol=git can be rewritten
to a different url and protocol.
(Bitbake rev: 69b4f9a09ff74378788cc2ec1ad58cd66b27ca59)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Username or password replacements in URIs were being appended rather than
replaced in mirror url remapping. Fix this and add a test case.
[YOCTO #13823]
(Bitbake rev: 66ad58bb87e5158aced572be4f1d5726bc97fcce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git fetcher is odd in that it supports destsuffix as a parameter but not
the default documented subdir parameter. destsuffix is more limited as it can't
take absolute paths. Rework the code to correctly support subdir.
Also cleanup to use the None default .get() values and be a bit more pythonic
and use subpath as the variable name for subpath for code clarity.
We could consider dropping destsuffix as a parameter as some future point.
Also fix the tests not to pass in a subdir parameter which was never used
but now causes errors.
(Bitbake rev: 66953f06fe822e4001efabd9fc1c985ea2b03f96)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test case test_fetch_premirror_use_downloadfilename_to_fetch to ensure
that 'downloadfilename' is used when fetching from premirror.
Although the other two previous test cases, test_fetch_premirror_specify_downloadfilename_regex_uri
and test_fetch_premirror_specify_downloadfilename_specific_uri already
implicitly contain such verification, we still need to add a very clear
case to ensure no regression.
(Bitbake rev: 20aabc3d53f69949810ecf02295725db947ffef8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When downloadfilename is specified, it is used to fetch from premirror.
So fix the test cases accordingly.
(Bitbake rev: 3b4d2e3b5024324058360a2a28f33c34114218d0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
https has been the preferred way to access websites for many years now.
Change all of the URLs with a _working_ https server/certificate to use
that URL.
(Bitbake rev: da543cdaf88a387675e25d3555765f1146e4105e)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set a prefix so the temporary directories are identifable.
(Bitbake rev: c3440b82cbe9c317f9961d61e12ea37fc9541ce0)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix:
lib/bb/tests/fetch.py:1288: DeprecationWarning: invalid escape sequence
for several lines of the fetch tests.
(Bitbake rev: 9d84fd557a3fcbae2cdd70b24e69325ad737a01e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds one new test that verifies the use of a specific filename
when defined in PREMIRRORS.
bb.tests.fetch.NPMTest:
- test_npm_premirrors_with_specified_filename
While testing bz#13039, it was found that test_npm_registry_alternate
fails with ENOTFOUND. This was corrected by using npmjs's public mirror.
The change to fetch2 for bz#13039 highlighted an issue with the
test_npm_premirrors test where the created file:// mirror was using the
downloadfilename rather than the tarball that is defined by the npm url.
(Bitbake rev: 5ba191a0407af9e652e3b86302dce3e952d6b587)
Signed-off-by: Scott Weaver <weaverjs@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds three new tests which evaluate different use cases of the
downloadfilename property.
bb.tests.fetch.FetcherNetworkTest:
- test_fetch_specify_downloadfilename
- test_fetch_premirror_specify_downloadfilename_regex_uri
- test_fetch_premirror_specify_downloadfilename_specific_uri
(Bitbake rev: 61db3e96530d650e098436fd086f0182d32998f7)
Signed-off-by: Scott Weaver <weaverjs@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
os.rename can fail for example an incremental build in Docker fails with:
OSError: [Errno 18] Invalid cross-device link
when source and destination are on different overlay filesystems.
Rather than trying to fix every call site, add a wrapper in bb.utils
for renames. We can then handle cross device failures and
fall back to shutil.move. The reason os.rename is still used is
because shutil.move is too slow for speed sensitive sections of code.
[YOCTO #14301]
(Bitbake rev: c5c4e49574ab2a65e06298a0a77bb98b041cf56b)
Signed-off-by: Devendra Tewari <devendra.tewari@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
