Add instructions to use 'install-buildtools' and
'buildtools-extended-tarball'.
Add gcc 5.0 requirement and call out how to
use above to prepare host development system.
(From yocto-docs rev: c6dbd9bf6860ffea1bc025907343373439d91737)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
jessie-backports is no longer supported, so python3-git and
pylint3 are not installable via apt-get (or at least not
without disabling security checks by using archive.debian.org)
Add note to use pip3 to install instead.
(From yocto-docs rev: 19a02c5c6ef9a317c2339c2ec71200e51335e32f)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CentOS-7 has different requirements than the much
newer CentOS-8. Add a section for CentOS-8 and
make the old section CentOS-7 specific.
NOTE: at the time this was written, the 'fop'
package is not yet available in epel-8. As
a Fedora packager, that will change.
(From yocto-docs rev: caf08811a23a29965ec915459019796a0c882d4d)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the author indo and use variables for author and email to make it
easier to change in future.
(From yocto-docs rev: 4fdf2a060705fa00b11b5a9d270f4ffa506c9927)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Migration to YP 2.5 contains incorrect description of routine for
delaying to first boot.
(From yocto-docs rev: 08f71ec137822c0c19b56956d7045dfb73a544d7)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the example used in explaining the PROVIDES variable to one
that actually exists, and point out that "+=" is unnecessary, a simple
assignment is sufficient.
(From yocto-docs rev: 80cd888ee81757bc5281f174b26974391ee45522)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor tweaks to chapter 5 of reference manual, including:
- grammar
- adding slashes to directory names for consistency
- collapse trivial paras into one
(From yocto-docs rev: 96b75e723bff042183f70a858d09df4aad094578)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Given the defined DocBook entity:
<!ENTITY YOCTO_DOCS_URL "&YOCTO_HOME_URL;/docs">
replace numerous instances of the more verbose
"&YOCTO_HOME_URL;/documentation", which is a redirect, anyway.
rday
(From yocto-docs rev: 53fa17321624028b12d880bc4236fbef46675eb4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the OEQA code revamp and code changes in testimage.bbclass,
testexport.bbclass, runtime/context.py and oeqa/runexported.py,
"QemuTarget" was obsolete and replaced by "qemu".
Replacing the refer of "QemuTarget" with "qemu".
(From yocto-docs rev: 87691219dfe312c0db0af1fa30cc3505298a27af)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the OEQA code revamp and code changes in testimage.bbclass,
testexport.bbclass, runtime/context.py and oeqa/runexported.py,
"SimpleRemoteTarget" was obsolete and replaced by "simpleremote".
Replacing the refer of "SimpleRemoteTarget" by "simpleremote".
(From yocto-docs rev: 1779a6d699ae7a6e51f8b92516eea948c1767400)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the "Manual Notes" section of numerous YP manuals with a
reference to the recently-introduced YP documentation mailing list.
(From yocto-docs rev: a10fe36c864b8f1a71c6a8eb7e1f6a4eef2f5171)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta-yocto commit 69ddecdb1516 [local.conf.sample: change default
MACHINE to qemux86-64] switched the default MACHINE from 'qemux86' to
'qemux86-64' but some documents which either explicitly mentioned the
default, or where this was implicit didn't receive an equivalent
update.
Where it made sense we continue this change in default to the docs. In
other places, such as the kernel-dev manual, we note the new default
and instruct the user how to switch back to 'qemux86'. Eventually we
should probably update the kernel-dev manual to use the default, but
for now the intention was to limit the impact of these changes.
Note that ext3 has also been replaced with ext4 for image generation,
so while we are modifying runqemu lines to qemux86-64 we also make the
change to reference ext4 such that the runqemu commands will function
properly.
(From yocto-docs rev: 8c1d8ab1170f47a2c2692beb903ab0b7c6835b7b)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is sometimes more appropriate to define the licenses that are
allowed to be used rather than the ones that are not permitted. This
adds a tips on how this can be achieved by using AVAILABLE_LICENSES
and some Python set arithmetics.
(From yocto-docs rev: dd26d8a9f89402a9828bf02f2e65054d4c0f406f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Update USERADD_ERROR_DYNAMIC[doc] and the first paragraph to match
the definition in meta/conf/documentation.conf.
* Add a note explaining the differences in behavior when setting
USERADD_ERROR_DYNAMIC to "warn" and "error" respectively.
[YOCTO #12932]
(From yocto-docs rev: 28cd546f3fe1eadd73ba71f9fe9a558538e69b0f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed so subsequent releases are relevant to the
initial release only.
(From yocto-docs rev: 7bb2c4f851aa968eb05b11c5471b81962f268eba)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updates to poky.ent
* Updates to mega-manual.sed
* Updates to all <manual>.xml files for date
(From yocto-docs rev: 5f752ef0193cb60cd5d46a63e99ffcd02107e0c2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #12760]
Updated the cmake.bbclass description to tell what directory
to insall custom CMake toolchain files into. Also, updated
the two areas in the "Writing a New Recipe" section that
mention CMake. Placed a couple notes there concerning the
same directory stuff.
(From yocto-docs rev: a65cd2c4c062d4ae388191b9d6708b4fadffaa3f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alejandro Enedino Hernandez Samaniego <aehs29@gmail.com>
commited a change to these manuals (see
9e79e96cad66316c1b4ee608723edfa763f0f9ef) and did not
use YP documentation standards for the content. I cleaned
up the text and tabbing.
(From yocto-docs rev: 9c95799322e1830a5faae0980384ab10b6504007)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was in a moving to YP version 1.8 migration section.
(From yocto-docs rev: b87f0882c39524747004fafc4d1caf58b3344c3a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was using "2.8" throughout the manual set instead
of "3.0". Updated all aspects to "3.0".
(From yocto-docs rev: db19937e98c59d4d2a9ce89877be3c8e0b05991a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turned "2.8" into "3.0". Nobody told me about skipping
2.8 and 2.9.
(From yocto-docs rev: 13819f0651c48adae9d1a8d6d19341ba5ee44978)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Fedora 30 and Ubuntu 19.04.
Swap openSUSE 42.3 for Leap 15.1.
Remove huge comment of old distributions.
(From yocto-docs rev: 8fe3040a68c0aee44c4a6dcd5088b61d6908b0f9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syntax to use multiconfig builds changed from multiconfig:foo:target
to mc:foo:target.
Clarify that BBMULTICONFIG defines additional configurations along with
the one coming from local.conf.
Fix these changes on both the dev manual and the reference manual.
(From yocto-docs rev: 9e79e96cad66316c1b4ee608723edfa763f0f9ef)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <aehs29@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When removed all it did was
inherit gnomebase gtk-icon-cache gconf mime
which would also be the most trivial replacement.
Most of the time not all of these classes were needed,
and it is recommended to use only the ones actually required.
(From yocto-docs rev: a0a3a8318a1488ad2fb00b29f1cf26a9d6701be2)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debian 10 is a supported distribution now, so add it to the documentation.
(From yocto-docs rev: 77ff109cf7dbe1858e9959c4b9f1225d0a1c5e32)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bluez4 was removed even from meta-oe 2 years ago,
which made made the bluez5 feature for selecting between
bluez4 and bluez5 mandatory for using the bluetooth feature.
The backfilled bluez5 feature has been removed,
including the bluetooth class that helped recipes
for selecting between bluez4/bluez5.
Recipes can replace ${BLUEZ} with bluez5.
(From yocto-docs rev: 025e2b5797b987b0260d7410e2e6d7283f5a7e91)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrected the requirements for the KERNEL_DEVCIETREE
variable example.
(From yocto-docs rev: 0502910c81f4d669457155ed5f52d5fa775d8d6d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We are not using Python2. I removed this instance in the ref
manual. The variable "PYTHON_PN" referenced Python 2. It no
longer does.
(From yocto-docs rev: bd2ed0c640e12e8010ebff0aaba77e8fe367d63e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a typo in the BBMULTICONFIG variable description.
It appeared as "BBMULTIFONFIG". I fixed it.
(From yocto-docs rev: c53b1bb6e588f9ee87cb8ab85fc8c3985257a37a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided a general link to the wiki on npm software.
Also, updated the section to point to the new section on how to
create NPM packages, which is in the dev-manual.
(From yocto-docs rev: 03fd635d06d64a53ad00196919350a45942731ce)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I left out the word "not" in a key sentence in the new
"Checking on the Upgrade Status of a Recipe" section.
Little words can make big differences.
(From yocto-docs rev: 46a524a0d6c9e2ed6428039a4454e384a6ef648d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the section to include more detail on what the user
sees in the returned table.
(From yocto-docs rev: 671279548dde7f356888ba1ad1551b8bb1f70a65)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I show the "devtool check-upgrade-status" command as part of
the "do_checkpkg" task section. I added a cross-reference
link to the "Checking on the Upgrade Status of a Recipe"
section in the ref-manual.
(From yocto-docs rev: 034054f431cc9f0e61c8e156eed66bdf6e1198a1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section showcasing the "devtool check-upgrade-status"
command.
Also, added a note in the "Upgrading a Recipe" section" to tell
the reader they might want to check on a recipe's upgrade
status before upgrading a recipe.
(From yocto-docs rev: 974f63fe8836fccd51f12b511c23644235cbd4b4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specifically missing was the "devtool check-upgrade-status"
command.
(From yocto-docs rev: beaa40e8d1037f237ab588ec6ce256b8c3a18543)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
