Discovered typo in the file... "naivte" instead of "native".
Fixed.
(From yocto-docs rev: baa9fb2b553db425c8a5cfca04d913963e24d0a0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of a DISTRO_NAME_NO_CAP variable, the occurrences
of the DISTRO_NAME variable had to be checked to see if they really
should be using the "NO_CAP" variable instead. Output and actual
branch names are case-sensitive.
(From yocto-docs rev: 711a3255538298dd3c4bd2af8ad13bc2d159c872)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to "April 2016" for all manuals that use this table.
(From yocto-docs rev: 4d3753cc92c446668b0c383736c2071e24e53dd2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I handled the occurrences of "oprofile" and "tools-profile" throughout
as I could. They are not all done yet. These in this commit have
been removed.
(From yocto-docs rev: d76e264ea210846ad8080134bacd56462ba69d24)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9386]
Added some missing information:
* Added instruction to be in the poky directory before cloning
the meta-intel repository.
* Removed the "source" part of the string for the bitbake-layer
command.
* Added text to describe that the user needs to be sure that the
same branches are in play for poky and meta-intel before they
launch the build.
(From yocto-docs rev: 65461624691a566a5849c6d9df7b269c3de2eba7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a variable named DISTRO_NAME_NO_CAP that can be used
to resolve to the branch name as it is needed on command lines
and as it appears in output.
(From yocto-docs rev: 595d81c31b0dcb442b351b05600da9480a9573b5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4047]
I went through and fixed a few areas where reviewers said there
was "quirky" phrasing. They might have been right in a few
places.
(From yocto-docs rev: 66fb97838f338ed3f787ec18f62702ef726ceffc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8595]
Applied some wording changes as part of the review process from
Richard Purdie.
(From yocto-docs rev: 3c4fc3cbdecb7e3c8287a915b82bc5469288d5db)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5092]
Added a new subsection to the "Configuring the Kernel" section to
describe the part of the configuration audit phase that deals
with non-hardware and hardware options.
(From yocto-docs rev: 2545c3f2cf45ffcc9bf9f388d929c8242b74b011)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9313]
Update the DL_DIR variable description to add a cross-reference
to the wiki page that talks about working behind a firewall.
Updated the 14.12 FAQ entry with new information about working
behind the firewall.
(From yocto-docs rev: 056e6881951023e62a7363ba60fe73cd6d2932b6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8595]
Added some examples on how to force the version.
(From yocto-docs rev: 4a98ce1ed623cd9763731453316f2ff8d8b8b82a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9336]
I updated the "Debugging" section within the "Tips and Tricks"
section. The list of items did not provide detail on two
BitBake command-line options you could use to dump out
signature data into .sigdata files. Also, the .sigdata files
were incorrectly referred to as .siginfo files.
(From yocto-docs rev: 7836c386f4f7c011de710b6ec9f6be13045dc559)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4047]
I added a new section describing how to add kernel features
from within a kernel recipe through the KERNEL_FEATURES
variable and the SRC_URI statement.
(From yocto-docs rev: d30925c65e3f49b2ba481f1e7f9cac98fe86f6af)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8272]
I re-wrote the section to basically consider kernel metadata
coming from either inside the recipe (recipe-space) or from
outside the recipe, which would be like a "kernel-cache".
The re-write eliminated the term "in-tree" regarding where
kernel metadata could reside.
(From yocto-docs rev: d358c00fbb779328bd472494023ecb802da15d59)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I commented out a large section that had to do with running
oprofile. Also, located and removed the link to that section
from the profile-manual.
(From yocto-docs rev: 63d6e754f994693c9a4d4b8211c6ef5f817c31f7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the following note in the section that deals with running
Eclipse with a remote application.
Fixes [YOCTO #9276]
Currently, Eclipse does not support SSH port forwarding.
Consequently, if you need to run or debug a remote
application using the host display, you must create a
tunneling connection from outside Eclipse and keep
that connection alive during your work.
For example, in a new terminal, run the following:
ssh -XY user_name@remote_host_ip
After running the command, add the command to be executed
in Eclipse's run configuration before the application
as follows:
export DISPLAY=:10.0
(From yocto-docs rev: 7bf2875ff1653a8e50fa8e2bba540b2eb2512d2d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7894]
I created two new task reference sections: distrodata and
checkpkg. Also, updated the distrodata class description to
reflect the presence of these new tasks.
(From yocto-docs rev: 3896cbf640d296dafb5eda37f89bba31a47ca8a5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the bitbake option and the TMPDIR terminology.
(From yocto-docs rev: c543e00eeb9e9a8074dfb195c971c37c095ecbdd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "meta-toolchain" is legacy now. I went through and removed
its use except for where it appears still as output from the
oe-init-build-env script.
(From yocto-docs rev: 1cc134060459278997d57f1293f54091c5404d85)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the heading for "Optionally Building a Toolchain
Installer" to "Building an SDK Installer". This changes the
heading and many references to that heading.
(From yocto-docs rev: 97d8cd34d0dd0993b1b1135bb75f2212bb46878a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better placement of this link. It did not need to be in the
<literallayout> example.
(From yocto-docs rev: 53c33ea4cc929e016812f0d3aac0d302758dc0f8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed some eMenlow stuff
* Cleaned up the description of the BSP structures we have now.
* Various links fixed into the SDK manual.
* Other minor fixes.
(From yocto-docs rev: 5e45005d7ff2254df2754a5ea2d7efd7f1c19a42)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Probably should have committed these separately but....
* Updated the BSP guide to use an example that we support.
I removed the eMenlow stuff completely.
* Fixed poky.ent so the 15.0.0 stuff is used for the variables.
This supports the 2.1 release.
(From yocto-docs rev: 598b261725235b6f160561db22bd9f31ec721066)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fixed some wordings
* Fixed some links for consistency
(From yocto-docs rev: 9737ba3a572140bec892ffb555241a2259bd517a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set year to 2016 and fixed some variables.
(From yocto-docs rev: d1e15dac45cb689c59d9301af776101336e07bf2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a devtool add and devtool modify flow digram. Updated
the Makefile to support those figures in the tarball creation.
(From yocto-docs rev: b40692065262dee0209329886b6e3a743c32b1bd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
