QEMU_EXTRAOPTIONS is a way to add PACKAGE_ARCH specific options to the
qemu_run_binary qemu commandline. The base QEMU_EXTRAOPTIONS variable
(ie without a PACKAGE_ARCH suffix) is not used, so defining it, either
directly or via an over-ride has no effect.
Although previously an over-ride for _armv7a was used, it did nothing
for most armv7a builds, which typically use PACKAGE_ARCH values such
as "cortexa9hf-neon". In practice this worked OK since without a -cpu
option, qemu-arm will default to emulating a CPU which supports all
required architecture levels.
qemu-arm (v2.5.0) with no -cpu option has been confirmed to
successfully run binaries built for armv7ve.
(From OE-Core rev: 62b25b3489b44969e4adad657daebfaffdb4de56)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that systemd doesn't use DBus directly, dbus can --enable-systemd. In fact
this appears to be essential for DBus to work on under modern systemd.
python-config.patch refreshed.
Package dbus-test-tool into PN-dev, and remove obsolete dbus-glib-tool
reference.
Remove obsolete --without-dbus-glib option, and dependency on dbus-glib in
dbus-test.
[ patch originally by Chen, tweaked and message rewritten by RB ]
(From OE-Core rev: 3cd34c673d2f64e310b474036754e1ead5775d66)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, in order to determine the existence of an already
initialized Git repository we checked if a directory named '.git' was
present in the buildhistory dir. However, e.g. in the case of git
submodules '.git' may also be a regular file referencing some other
location which was causing unwanted behavior. This patch changes
buildhistory.bbclass to check for any file named '.git' which fixes
these problems.
[YOCTO #8911]
(From OE-Core rev: a5e931e0b1d941cc938fe2f49625c54b07fab0ce)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
connman-conf is now a systemd oneshot and therefore doesn't need to
be sed'ed in to the ConnMan service file.
Note: this doesn't affect sysvinit where we provide a ConnMan
init script which checks for the presence of the wired-networking
script and, if it exists, executes it as part of the connman init.
[YOCTO #8399]
(From OE-Core rev: 20c897d34ba4ea3985723383a0effa3631cd925e)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install a oneshot unit file that is started before ConnMan to
configure a wired network inteface with the wired-setup script,
rather than requiring this script to be manually run some how.
(From OE-Core rev: 530c4525f278bff72d8184035d00020c10b8f8b4)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a script in netbase, debian/netbase.postinst, which create
/etc/hosts, but it is not called, so ipv6 host is missing.
now copy them from Ubuntu; and add localhost as alias of ::1
(From OE-Core rev: 4ae53085b173ed57acacebcd3e199abe2cb77a60)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following CVE update:
Author: Yevgeny Pats <yevgeny@perception-point.io>
Date: Tue Jan 19 22:09:04 2016 +0000
KEYS: Fix keyring ref leak in join_session_keyring()
This fixes CVE-2016-0728.
We also integrate the 4.4-rt3 version.
(From OE-Core rev: cca987b2f62dc6b51a02564ccd4041bde2897f13)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file 'src/clnt_bcast.c.orig' seems to have been accidentally
included when the Use-netbsd-queue.h.patch patch was created.
(From OE-Core rev: e5d8c575e8ba5d8d56409f45aa081ecec576dcd0)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ptest-runner 2.0 is C written program for run ptests of
Yocto/Openembedded, is fully compatible with previous version of
ptest-runner that was a shell script that runs ptests sequencially.
The mainly reason for the new ptest-runner in C is because is designed
for run in tiny systems also the old shell script version have problems
when certain ptest hang it becomes blocked indefinitely.
Now the ptest-runner 2.0 support the next features:
- Specify the directory for search ptests.
- List available ptests.
- Specify the timeout for avoid blocking indefinetly.
- Only run certain ptests.
Proposed features:
- Adds support for per ptest output file.
- Adds support for run ptests in parallel (review possible
colisions in ptests).
[YOCTO #8021]
(From OE-Core rev: 2a6746cb5e60c9c5477d1df062bb2657d2fe4780)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add explicit runtime dep on bsd-headers-dev
so we dont miss them in dev images
(From OE-Core rev: 37419969a37b1303be27cb32d76fbea27c8086ce)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The version submitted upstream has been updated to this one
after feedback
(From OE-Core rev: d178082b0577682ffd6549d8867636cbec3a7d04)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was using wrong keyword and let it point to section of header file
(From OE-Core rev: 80d015442b5efdf796dbe0b30642f168d5482dca)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove mempcpy patch its already in uclibc now
refresh libargp patch to match latest elfutils
Add ALLOW_EMPTY for musl
core-image-cmdline-full asks for elfutils package to be added to package
it has all eu-* tools but we dont build them on musl. nevertheless lets
satisfy the dependency so image can build for musl
Build libdw,libasm,libebl along with libelf
enhance the musl portability patch to compile every other library
except the eu-* tools
Fix build on aarch64/musl issues
Header inclusion ends up with duplicate definitions of iovec struct
since uclibc defines the same in usersapce, we have been depending upong
including the kernel header on aarch64, using sys/uio.h is the right
approach
Fix x86 build warning seen on musl
(From OE-Core rev: a28c70455931e0b7e3449a76c3b9132bd572478b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is inspired by musl porting, where grub's configure is enabling
largefile support based on glibc versions, instead an upstream patch
turns it into autoconf check
Update git version recipe
arm platforms use this recipe to provide grub and it needed fixes from
upstream so upgrade to latest tip of git and forward port patches as
well as drop the ones already applied upstream
(From OE-Core rev: a290429c8415042cb8c2f4258e76a3cc6815a172)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If some parts of this test fail put the failing output in the logs to help
debugging.
(From OE-Core rev: aeee86050019caae5da3af8d31cf57bc811c5e80)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python hard-codes the encoding of many locales; for instance, en_US is
always assumed to be ISO-8859-1, regardless of the actual encoding of
the en_US locale on the system. cf
https://hg.python.org/cpython/file/7841e9b614eb/Lib/locale.py#l1049,
getdefaultlocale(), etc. This code appears to date back to python 2.0.
The source of this hard-coding is Xorg's locale.alias but is ultimately
justified by glibc's SUPPORTED.
This causes problems on OE, because any locale lacking an explicit
encoding suffix (e.g. en_US) is UTF-8. It has been this way from the
beginning (svn r1). That is not a bug, per se -- no specification
prohibits this AFAIK. But it seems to be at odds with virtually every
other glibc-based distribution in existence. To avoid needlessly
aggravating hidden bugs that nobody else might hit, it makes sense to
disable this behavior such that locales are named precisely as specified
by SUPPORTED.
I suppose that reasonable minds may disagree on whether or not the
current behavior is prudent; at the very least, this is likely to break
IMAGE_LINGUAS settings. So let's create a new distro variable
LOCALE_UTF8_IS_DEFAULT to allow either behavior. Set it to 0 and all
your locales get named exactly like they are in SUPPORTED. Leave it at 1
to preserve current OE locale naming conventions.
(From OE-Core rev: fcde0c43f7b57ec6f8201226ad98e6e46708d288)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since it is now possible to concatenate multiple regular expressions
into BBMASK, there is no longer any real reason to limit it to be
specified only in local.conf.
(From OE-Core rev: 629043e3ec798543a31c3c2f9fa7ca5fa8248228)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clear out runtime deps for dev package, since PN is empty packager will
try to resolve to PN when building images with musl and error out since
PN is deleted as its empty
musl-dev explicitly depends upon it so it will get pulled into build
in right order
(From OE-Core rev: 668fddd7be9aa5850ef8f15441814f3c8b98c0de)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mode_t is needed by gdbserver headers so include sys/types.h to get them
(From OE-Core rev: b0742a41e80c48de98f82f7d1e963d462c941934)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes runtime errors e.g.
/opt/ltp/ver_linux: line 50: ldd: command not found
awk: cmd. line:2: (FILENAME=- FNR=1) fatal: attempt to access field -1
/opt/ltp/ver_linux: line 54: ldd: command not found
(From OE-Core rev: 6340624949ee2e556e46381d7144c989f0945ae0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
