Moving intel 9260 firmware because it's common wifi chip and otherwise
to include this firmware whe have to include iwlwifi-misc which included
a lot of firmwares.
(From OE-Core rev: d924307b9cee4065ff60d08e3b4298278693ff2c)
Signed-off-by: Yannick Rodriguez <y.rodriguez@i2s.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The GPLv2 text is the standard text, so the -carl9170 package can just
set LICENSE=GPL-2.0-or-later and the custom license handling removed.
Confirmed in the source that the intended license is v2-or-later, not
v2-only as WHENCE says.
(From OE-Core rev: f6ec30f46182afa27678999ba672f05b2899c77e)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split _most_ of the rtl_nic drivers to a subpackage. Notably this does
not include rtl8168 as this is already split into a separate package.
These drivers are fairly common so this lets people install the essential
firmware easier.
Also split out some large firmware collections into subpackages:
- Mellanox (82M)
- Marvell Prestera (72M)
- QLogic 4xxxx (21M)
(From OE-Core rev: fce06a1632484c9001541df1ac27ffca7d1d8b4b)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Installing the linux-firmware-dev package fails because of the following problem.
For each mediatek MT76x firmware a separate license package was declared.
In all these license packages the same file was referenced as the license file.
This meant that if several of these packages were used at the same time,
the license packages would be empty.
This commit defines a common license package for the mediatek MT76x packages,
which is then referenced by all of them.
Fixes: dfb7d2c426 ("linux-firmware: create separate packages")
(From OE-Core rev: b8af58ceade4d277133e49eeac0520792de85cce)
Signed-off-by: Julian Haller <julian.haller@philips.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dptx firmware is required by the Rockchip Type-C DisplayPort
controller, and we shouldn't have to pull in all of the other firmwares
just for that.
(From OE-Core rev: b624c194b054dceace6f260150c33c301cfe6e80)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-firmware commit 9afbbf25689c
("powervr: add firmware for Imagination Technologies AXE-1-16M GPU")
has added the initial firmware for AXE-1-16M GPU.
New packages will be called linux-firmware-powervr{-license}.
(From OE-Core rev: eb3150c63b8a23a4aa9d526f00f5ed94838d1e7c)
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit includes the 'cyfmac4373-sdio.clm_blob' file in
the list of files for the linux-firmware-bcm4373 package.
Without this file, the linux-firmware package adds all
firmware packages to the image.
(From OE-Core rev: 7886d3b77200e4488393fa11c8198658fcf386cd)
Signed-off-by: Rodrigo M. Duarte <rodrigo.duarte@ossystems.com.br>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bnx2x is another broadcom ethernet adapter with its own firmware. Place
it into its own subpackage.
(From OE-Core rev: 414f71bb692da7ca1899b07ebb689edeb53f8e0d)
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bnx2 module uses both the mips and rv2p files, so package them all
together. Remove -mips from the package name, but add an RPROVIDES for
compatibility.
(From OE-Core rev: 46f2b7b3bebc7efdb4199cdfe386dc16c049d8d7)
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iwlwifi uses the .pnvm files for newer AX210+ cards, so package them
into the iwlwifi-misc subpackage.
(From OE-Core rev: 056c4de1422ff06745c5669f871a1bb6f5390d01)
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new symlink required for the sound driver to find the audio topology
to the linux-firmware--qcom-sc8280xp-lenovo-x13s-audio package.
(From OE-Core rev: 313135eaa236872e4aa5f698515a3363eb75601f)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Follow the upstream change (which moved wlanmdsp and notice files from
ath10k to sdm845 dir) and include notice file into the sdm845 modem
firmware package.
(From OE-Core rev: e03d1b9cc06ae23a8abc8a30b1c09bd997465400)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is in continuation of earlier commit:
3ddddfc14f
linux-firmware: create separate package for cirrus and cnm firmwares
And creates separate sub packages for firmwares corresponding to following list of
licenses:
LICENSE.amphion_vpu
LICENCE.cw1200
LICENSE.ice_enhanced
LICENCE.mediatek
LICENCE.microchip
LICENCE.moxa
LICENSE.nxp_mc_firmware
LICENCE.OLPC
LICENCE.phanfw
LICENCE.qla2xxx
LICENCE.ti-keystone
LICENCE.wl1251
LICENCE.xc4000
LICENCE.xc5000
LICENCE.xc5000c
(From OE-Core rev: c110e5708465a6becc611acf97f166302a17ebdf)
Signed-off-by: Fahad Arslan <fahad.arslan@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some licenses only allow usage of corresponding firmwares when a specific
hardware is present. This requires split of such firmwares from linux-firmware
package to firmware specific sub package. As this split is based off of
licensing, it makes sense to group firmware blobs having the same license in the
same package. This commit is a first step in this direction, and creates
separate packages for cirrus and cnm firmware.
(From OE-Core rev: 53d9d8789efc701609a5a1e985287344c2209d62)
Signed-off-by: Fahad Arslan <fahad.arslan@siemens.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These BT only firmware files are submitted for NXP chips.
88w8997-bt:
uartuart8997_bt_v4.bin version: 16.92.21.p81
helper_uart_3000000.bin version: 16.92.21.p81
88w8987-bt:
uartuart8987_bt.bin version: 16.92.21.p76.5
88w9098-bt:
uartuart9098_bt_v1.bin version: 17.92.1.p136.24
iw416-bt:
uartiw416_bt_v0.bin version: 16.92.21.p81
iw611-bt / iw612-bt:
uartspi_n61x_v1.bin.se version: 18.99.1.p154.40
These firmware files are downloaded over UART interface. The
helper_uart_3000000.bin needs to be downloaded before
uartuart8997_bt_v4.bin for 88w8997 chip to set download baudrate
to 3000000.
The above commit message is copied from the source commit message:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/nxp?id=1f82dd25c3ea59b6bed80ee685d860f0c5f19875
(From OE-Core rev: 4a6cf0b53346262872dd82a55d69a93a8d2e2cce)
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add audio topology description to the qcom-sc8280xp-lenovo-x13s-audio
package. The file is licensed is copyright by Linaro and licensed under
BSD 3-clause license.
(From OE-Core rev: 958d6a209edf059d31ff07bdd55179fc21ea7079)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following linux-firmware commit moved the mt7601u firmware blob
into a mediatek/ subdirectory, update the path accordingly.
8451c2b1 ("mt76xx: Move the old Mediatek WiFi firmware to mediatek")
Fixes: 64603f602d ("linux-firmware: upgrade 20230404 -> 20230515")
(From OE-Core rev: 6fa5c4967a7e70192e9233c92534f27ec3e394c8)
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For newest Qualcomm platforms the firmware for the Adreno GPU consists
of two parts: platform-independent SQE/GMU/GPMU/PFP/PM4 and
platform-specific ZAP shader, which is used during the boot process. As
the platform-independent parts can be shared between different
platforms, split the platform-specific part to the separate package.
(From OE-Core rev: bf00a042d2fa2eb4b20d8c5982926758821bf990)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RTL8822 is a serie of wireless modules that need firmwares to function correctly.
The linux firmware recipe does not have a package of these firmwares, and this commit add them.
(From OE-Core rev: 6459959beeb91c0b694f5f17b6587a12c6dcb087)
Signed-off-by: BELOUARGA Mohamed <m.belouarga@technologyandstrategy.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Latest linux-firmware archive inclues firmware for the Dragonboard 410c
device (Qualcomm apq8016 SBC). Follow the rest of linux-firmware-qcom-*
packages as a template and create packages for the new firmware files.
(From OE-Core rev: 380216e8d3b63d563ebfb10445fc6eb5e77eb9f2)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WHENCE checksum changed because of updated version lists and removal of
information for the RTL8188EU driver.
(From OE-Core rev: 986f8ca9d4c2c22d368f69e65b2ab76d661edca0)
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Newest linux-firmware release got firmware for Adreno A200. Add these
two files to the ${PN}-qcom-adreno-a2xx package. As these files are
licensed under a separate BSD-3-Clause license, add separate license
package too.
(From OE-Core rev: 56e1b2b06ef7f22d4ac5899046f650ae8ec0d547)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is not enough to depend on the ${PN}-qcom-license package. Set
LICENSE variable for all the qcom packages to point to the proper
license.
(From OE-Core rev: 9dc41e18dc138a7cce920f8e4c85eb3130c0d553)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to have linux-firmware in the sysroot. The sysroot won't
ever be used anyway as nothing needs the firmware at build-time, but this
saves us building a ~900MB sysroot (~300MB sstate tarball).
(From OE-Core rev: 26ed998c4f201c5cacf330f52e51e416afbd300c)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Realtek Bluetooth devices require binary firmware files. Package them
separately in order to avoid installing the full linux-firmware package
on embedded devices.
Affected (end user) products (incomplete list):
- TP-Link UB500
- Logilink BT0054
(From OE-Core rev: fb44eb4feef54f2343c8186809a65dcb9b58a9b2)
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add packages for the new Qualcomm firmware released for Lenovo X13s
laptop.
The INSANE_SKIP:${PN} has to be provided to silent following warnings:
WARNING: File '/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn' from linux-firmware was already stripped, this will prevent future debugging!
WARNING: File '/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn' from linux-firmware was already stripped, this will prevent future debugging!
WARNING: File '/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn' from linux-firmware was already stripped, this will prevent future debugging!
WARNING: File '/lib/firmware/qcom/sc8280xp/LENOVO/21BX/qcslpi8280.mbn' from linux-firmware was already stripped, this will prevent future debugging!
(From OE-Core rev: af9924a3da0569e90c2d3abe030584456e66229b)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
