As with the Python test, this can be both better and faster. No need to copy a
file, just run a one-liner.
(From OE-Core rev: c6eef46747fe58bb2310be4f06d2fa9b67901d72)
(From OE-Core rev: 9188ef8d1edbba8041a73d3bb8a9bfd194db0e92)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should only be wiping out things on target if the tests have
actually run.
(From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e)
(From OE-Core rev: dab22dc58eabaeb421afa3c7de1cc08c5ec34c61)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
(From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210)
(From OE-Core rev: e4990ae01c9f3f486b4b745a2602795e9d496109)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark up these tests as needing a compiler, make and kernel source code
as appropriate, the image feature requirements can then be retired.
(From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a)
(From OE-Core rev: 544c56b6950f0598d5eaf62d9ae9d9de5fcb7eaf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the OEHasPackage decorator to a variety of tests so they determine
automatically if they should run against a given image.
To ensure tests can do this we need to move target operations such
as scp commands into the tests and out of the class startup/teardown.
(From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a)
(From OE-Core rev: 03b7658369bb7c1c8fbbaac7d9e281617cc16135)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
(From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba)
(From OE-Core rev: babdd2f6addb06c23e4882107be07034ca49bcb8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
(From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc)
(From OE-Core rev: 1ce378ce07d2c49f40054893a623456c8471e177)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
(From OE-Core rev: 872c6e5101f4f27dcfc63d141d1b6568f46d2b5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
(From OE-Core rev: e1b050f53ece2a31cd6866d2d737d7c67a44cea4)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
MACHINE = "qemux86"
QEMU_USE_KVM = "qemux86"
IMAGE_CLASSES += "testimage"
$ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs
[snip]
File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean
raise ValueError("Invalid boolean value '%s'" % value)
ValueError: Invalid boolean value 'qemux86'
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm
will be enabled if target_arch == build_arch or both of them are x86 archs.
(From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44)
(From OE-Core rev: de1b80f7f7b787f6b5b62c576ca6c62d2440031c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use our own lsb function instead as used elsewhere by the codebase.
(From OE-Core rev: acac45a6fd604d28ef7c23d67482af3d7e8bcfe3)
(From OE-Core rev: 570256a64af5a3fa994a20a5cc4c74d59ffc361f)
(From OE-Core rev: d58fe9d352ae7de857e7f55b88f6e7d35b2cd706)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 5s timeout for non-kvm is too short, especially when the load is high,
which leads to unexpected errors, so set timeout to 60s by default.
(From OE-Core rev: 8197d0f638a760fc03062c7a9009117d083d7ead)
(From OE-Core rev: 6c930a8f5c11947c3b916efe23f33af462701bee)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-12-06 23:19:24,564 - oe-selftest - INFO - Traceback (most recent call last):
File "/media/build1/poky-sumo/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/media/build1/poky-sumo/meta/lib/oeqa/selftest/cases/eSDK.py", line 78, in setUpClass
cls.tmpdir_eSDKQA = cls.tempdirobj.name
AttributeError: type object 'oeSDKExtSelfTest' has no attribute 'tempdirobj'
(From OE-Core rev: 2c60908a2039d333a9fe2651622750ff6ed4cce1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
INFO - ======================================================================
INFO - ERROR: setUpClass (eSDK.oeSDKExtSelfTest)
INFO - ----------------------------------------------------------------------
INFO - Traceback (most recent call last):
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/selftest/cases/eSDK.py", line 76, in setUpClass
cls.tmpdirobj = tempfile.TemporaryDirectory(prefix="selftest-esdk-", dir=bb_vars["WORKDIR"])
File "/usr/lib/python3.5/tempfile.py", line 929, in __init__
self.name = mkdtemp(suffix, prefix, dir)
File "/usr/lib/python3.5/tempfile.py", line 507, in mkdtemp
_os.mkdir(file, 0o700)
FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-worker/oe-selftest-debian/build/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/selftest-esdk-q7ln84gc'
(From OE-Core rev: 170a601a99836d13b69e5287bee0d3e71983dd46)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having image-buildinfo enabled causes containerimage.ContainerImageTests.test_expected_files
to fail due to the presence of an unexpected file:
['./',
'./etc/',
- './etc/build',
'./etc/default/',
'./etc/default/postinst',
Tweak the class to allow it to be disabled and disable it from the test just in
case it was enabled.
(From OE-Core rev: af67bf422a4df5b7e07894512ff73a5f493682ab)
(From OE-Core rev: f49ab8b1610c045acaed7b964d12f07f969df856)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The python git module may or may not be enabled, allow this code to
function without it, falling back to the same method as metadata_scm.bbclass
uses. This will be cleaned up in the next round of feature development.
(From OE-Core rev: 6350586ba9f4a4107a2d457590824cd4d662d5b9)
(From OE-Core rev: 32c9169b76e13e53b6a9ab4a59932cea7863d992)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently sdk & sdkext will output json file to LOG_DIR, while
selftest will output json file to TOPDIR/log.
Standardize selftest json output file to LOG_DIR.
(From OE-Core rev: 9f2e39684cbbe9f87eeef6a81961e6db783439e3)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
(From OE-Core rev: 173f59acf9722e2ef27fdd49c20f7d3d664917eb)
(From OE-Core rev: 3b69099edc7db99c11bfb41eab2af50bd0e3d4f2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA selftest need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the oe-selftest log directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
(From OE-Core rev: a95218525a4c8228fff9908ffbda85c6b85e101c)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to see failures/errors listed last since this is the most easily
visible part of the log on consoles or autobuilder output and makes
human processing easier rather than having to scroll up and scan for
a single failure.
(From OE-Core rev: 2cc07ab253f1ba6a1f07a66051c9ba6d98cd2357)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to have the counts of success/failure/error/skipped at the end of the
results to allow for easier human reading of what happened.
(From OE-Core rev: 5942318a261ce7a885f351e214669068ff9d8931)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
(From OE-Core rev: a13e088942e2a3c3521e98954a394e61a15234e8)
(From OE-Core rev: 526ceab9d0e43f73635bb92e8dd7763ef75ad33b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA need to output testresult into single json file, where json
testresult file will be stored in git repository by the future
test-case-management tools.
The json testresult file will store more than one set of results,
where each set of results was uniquely identified by the result_id.
The result_id would be like "runtime-qemux86-core-image-sato", where
it was a runtime test with target machine equal to qemux86 and running
on core-image-sato image. The json testresult file will only store
the latest test content for a given result_id. The json testresult
file contains the configuration (eg. COMMIT, BRANCH, MACHINE, IMAGE),
result (eg. PASSED, FAILED, ERROR), test log, and result_id.
Based on the destination json testresult file directory provided,
it could have multiple instances of bitbake trying to write json
testresult to a single testresult file, using locking a lockfile
alongside the results file directory to prevent races.
Also the library class inside this patch will be reused by the future
test-case-management tools to write json testresult for manual test
case executed.
(From OE-Core rev: 00e03b5004f1eb6d59295544b3a8620504278f51)
(From OE-Core rev: 045511425577ccbe89d8eb91e2a87e385390cabf)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor the original _getDetailsNotPassed method to return
testresult details (test status and log), which will be reused
by future OEQA code to write json testresult.
Take the opportunity to consolidate and simplify the logic used
to gather test status and log within the TestResult instance.
(From OE-Core rev: 79ee7d1c371a86edeb61c99679985118da657e5d)
(From OE-Core rev: bc444181f9658423856621b2f2c60364642ae5b1)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This isn't present on modern distros by default and doesn't work with
testtools, needing multiple code paths in the code. Remove it in favour
of finding a better replacement for results collection/analysis.
(From OE-Core rev: 8001d933a8dc86004db014777f094d718086687d)
(From OE-Core rev: 02449e89d62a7714d30ab6e2e58c476dc9441f7a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There doesn't appear to be any reason we need this _results indirection
any more so remove it.
(From OE-Core rev: b618261811c48ff3b98eab1b340a8cd09ef183c6)
(From OE-Core rev: ab271b49d9b55ea271d519c3a4da0b639a07f0bb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have several options for parallel processing in oeqa, parallel
execution of modules, threading and mulitple processes for the runners.
After much experimentation is appears the most scalable and least
invasive approach is multiple processes using concurrenttestsuite
from testtools. This means we can drop the current threading code
which is only used by the sdk test execution.
oeqa/decorator/depends: Remove threading code
Revert "oeqa/sdk: Enable usage of OEQA thread mode"
This reverts commit adc434c063.
Revert "oeqa/core/tests: Add tests of OEQA Threaded mode"
This reverts commit a4eef558c9.
Revert "oeqa/core/decorator/oetimeout: Add support for OEQA threaded mode"
This reverts commit d3d4ba902d.
(From OE-Core rev: a98ab5e560e73b6988512fbae5cefe9e42ceed53)
(From OE-Core rev: bb9a85e157e669d7a91c3bbefc8d5138e7b8b6ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code assumes if something isn't a failure of some
kind, it was a pass. When test case IDs weren't matching, this lead
to very confusing output where things would fail, then be listed as
passing.
This adds code to track successes, ensuring we don't end up in this
position again with unmatched entries being listed as UNKNOWN.
(From OE-Core rev: 4374c296d8963e4f6a1aa7bef7983ad0a1c2fcff)
(From OE-Core rev: bcb2948773d76befef2be787be6d25cf544e49a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can directly compare the test case IDs rather than representations,
then if we're using subunit to split the tests, the comparisions still
work as intended.
(From OE-Core rev: 72e5f46f75454ba4c445c65c1cbc616a9e72fc6e)
(From OE-Core rev: 4c53aac5315f9d0a0ed95cbeb48b7704e274e3a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing logfile is simply placed in the current directory. Since the test
changes cwd to BUILDDIR, the symlink to the log can be placed in an invalid
directory. We also see trackbacks if the symlink is invalid.
Improve things by:
* Placing logs in LOG_DIR (or BUILDDIR if unset).
* Using a full path to the log meaning the log and link are placed in the same directory.
* Using lexists instead of exists so invalid symlinks are handled correctly.
(From OE-Core rev: 750ece11bed0e62a11e0003d1d16a81f7c219761)
(From OE-Core rev: 9c4c3c876dd5d224133571fcad1095af1098ae1d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid the warning:
meta/lib/oeqa/selftest/context.py:8: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses
import imp
In this case importlib is a direct replacement.
(From OE-Core rev: db7a60c36a2d3eefc61ae6e1ede01680dc932035)
(From OE-Core rev: 351a7b75959593922909d7e1929a6429a2bf94a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up the warning:
meta/lib/oeqa/core/loader.py:27: DeprecationWarning: inspect.getargspec() is deprecated, use inspect.signature() or inspect.getfullargspec()
_failed_test_args = inspect.getargspec(unittest.loader._make_failed_test).args
(From OE-Core rev: d2deb66830be2d44532fea3d5db763b57778252a)
(From OE-Core rev: f9ab10bb08446052fd6af2a21f38d8454e466d51)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've seen issues with rootfs size calculations and we've seen systems
like opensuse which have btrfs mounted on /tmp causing selftest failures.
(From OE-Core rev: 61be3cd748d1b7321a1fc4cfe84efa9b26a6aee0)
(From OE-Core rev: d936faabfb29ea377d74e77332a2a91603747ac7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we need to create a temporary directory in targetbuild or buildproject use
tempfile.TemporaryDirectory so that when the test case is finished, the
directory is deleted.
Also synchronise the logic and don't possibly store the temporary directory in
self.tmpdir as nothing uses that.
(From OE-Core rev: db0e658097130d146752785d0d45f46a3e0bad71)
(From OE-Core rev: d39252324a13580cc96f0694b88bc10515e030a0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reorder the shutdown/teardown to avoid:
File "/home/pokybuild/yocto-worker/oe-selftest-ubuntu/build/meta/lib/oeqa/utils/qemurunner.py", line 224, in launch
op = self.getOutput(output)
File "/home/pokybuild/yocto-worker/oe-selftest-ubuntu/build/meta/lib/oeqa/utils/qemurunner.py", line 90, in getOutput
fl = fcntl.fcntl(o, fcntl.F_GETFL)
ValueError: I/O operation on closed file
(From OE-Core rev: 8e7d756862d2a8d62f3c87497d6d65ddb3c1b962)
(From OE-Core rev: 48979ffbe25351f92179021a973207a71bbe7a4e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
assertTrue doesn't give good debug information when things fail. Update
several to use assertIn which gives information upon failure, for the
others print the log information upon failure.
(From OE-Core rev: c29cb75d5ce6b0873a934f4709b0c8824f7164d3)
(From OE-Core rev: 6f2bb2c12289422396deb793ae4b4e99cfa88c7b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
setUp() is used to populate a directory of temporary files, and deleted in
__del__. However setUp() is called once *per test* so __del__ would only be
able to remove the last directory created.
Fix the code by using the natural counterpart to setUp, tearDown(), to clean up.
(From OE-Core rev: 68b4723e6fb11d171869185bccf28f32f6284c18)
(From OE-Core rev: edd2ecbc86d8b02a0467491451306f67e81d9ead)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Heartbeat events default to once a second and we need to ensure we have
enough time in the task to see them.
Add a nostamp delay task 5s long so we can have a consistently timed
task which doesn't need cleanup or have unneeded dependencies. This
ensures we should deterministically see the disk moinitor events
regardless of the state of the build. This is done in a way which
doesn't corrupt build state or need cleanup and is efficient.
(From OE-Core rev: ecc49ee8986929e2429d948000a0ca588fe63959)
(From OE-Core rev: d5ce38168238181423c9dcd1d258253e3515d0a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test occisionally fails as m4 doesn't recompile, meaning the logfile test
then doesn't find mention of ccache.
To ensure m4 does recompile, clean m4 before force compiling it.
(Reading the test is confusing due to the test cleanup also involving a clean)
(From OE-Core rev: 6e0b9214a0d57ed45a5df0ba5c9887a9045b89b1)
(From OE-Core rev: b729a46820cce38b3d500271df19bdaf31973140)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If runqemu fails it would leak an unclosed socket and file. Ensure we
close these in all cases to remove the resource warning.
(From OE-Core rev: ed80e46ccbc8fe8e9148d80723152066fa00ba28)
(From OE-Core rev: baa8313e492cff8c31633a558792500b10493e9e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time a runqemu() fails, the log handler would be left behind meaning
messages from any subsequent run would be duplicated (or worse/more).
This ensures we remove the handler regardless and means we no longer
have the duplication.
(From OE-Core rev: 532984708436bdfa3a8cac2c684a425eb249bad0)
(From OE-Core rev: 600e71ede1977c45fed1958dd5356911e4fcf272)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than just referring the user to the logs containing the failure, print
them on the console. This aids debugging with oe-selftest with parallelisation
as the logs may otherwise be lost.
(From OE-Core rev: 36a018e245a232f520ff946f152cc875927a6fb4)
(From OE-Core rev: 0ea441ab6a6fe752cc8820fb371e67eee92353e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current failure mode doesn't show us what the logs actually looked like
and later cleans can lose them. Show the whole log in case of failure
to aid debugging intermittent problems on the autobuilder.
(From OE-Core rev: 7c3a0dc5978cea898b1ca51decf4d6e7cf9d519f)
(From OE-Core rev: 60b58e976dcc2a45a036e18cfcc87933a8859c9f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
