At the end of the section that describes how to set up the
development machine for CROPS, I added some user links for more
information based on the type of container the use is interested
in.
(From yocto-docs rev: 6888d8454839bbb2ecdf96ce421c7d8723931d65)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Added content for steps to set up a native Linux host for using
the Yocto Project.
(From yocto-docs rev: d8a18d382c584dbdfa7f5f190a92cc7cde0f9601)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I took the section that described how to use a pre-built kernel
and run it through QEMU out. This is basically a QEMU usage
section and is not in that area. There were some QEMU speed
up items suitable for the QEMU concepts section in the ref-manual.
I put those in that area.
(From yocto-docs rev: b081013aa10b42e4eb88ed54940112c5ae106911)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a figure for this simple build workflow that uses
BitBake from a Linux host. Also did a bit of re-writing.
A new figure was introduced so the Makefile had to be adjusted
to include that figure. The figure resides in the figures
directory of both the dev-manual and the mega-manual.
(From yocto-docs rev: c3b0b1d53f551c02202cef80a8a48dd24576b975)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The section on the devtool workflow in the dev-manual was 99%
identical to what was in the sdk-manual. I have moved the
workflow procedure from the old "Model" chapter of the dev-manual
to be merged with what was in the sdk-manual. In truth, the
only things added were a note about devtool not being exclusive
to SDK development.
The result of moving (deleting) this section was that the "model"
chapter of the dev-manual went away. The devtool stuff, Quilt,
devshell, and python shell are all out now and there is no
chapter left. So, mega-manual had to be adjusted to not pull that
chapter in when building the dev-manual. I had to delete three
figures that were used in the flow. The figures were already
replicated in the sdk-manual. The figures were deleted from the
figures folder of both the dev-manual and the mega-manual.
I had to make sure all references to the old devtool stuf in the
YP doc set were adjusted.
(From yocto-docs rev: 5dbd643d31ab502df53a22229e457a03da7772b7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
This section simply pointed to the SDK manual. Does not
need to be in the new "how-to" form of the dev-manual.
(From yocto-docs rev: 1cd842a323ba09ef69e14f56dca1c2a5576252ee)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put in some edits to be very clear on the state of the files
for the user when they check out by tag.
(From yocto-docs rev: 622d324e7f167f55a5de86ec7af65d7554f2aec8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-wordings to be clear about what the user is getting when
they check out a development branch of an upstream repository.
(From yocto-docs rev: deb6ecfd35a76760bc2270bbbc69aa232b0c8cc7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clarified wording so reader understands they are checking
out the master branch by default.
(From yocto-docs rev: d1e77fff752d9960120340601bc2520c51c4f073)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Manual style dictates use of bold lead-ins for a numbered list.
(From yocto-docs rev: 32469dc0d61d755d0119a0374070221b0bd4bdfb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Manual list style requires steps to have bold lead-ins.
(From yocto-docs rev: 2d226cf6710853f7be8f0c3bd8b1eea72cb4eb7f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Formatting style need bold lead-ins for steps.
(From yocto-docs rev: b75337188e2346dd40004e22b45a2975f1d4cff3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moved this section from the "Getting Started with the Yocto
Project" section. The topic is not really a getting started
topic. It is better suited in the "Common Tasks" chapter.
(From yocto-docs rev: d6cdade9066bdbce0596672978c178d2ec82c9a4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I re-wrote the "Building Images" section into a "Performing
a Simple Build" section. A single link in the common tasks
chapter was affected by the section name change.
(From yocto-docs rev: de5a4cfa4f63538fe0a5ec0c2aacfb9222b70c4b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The chapter on setting up YP has been completely re-written to
move towards a "how-to" manual. This involved touching every
aspect of the chapter. All subsections now have procedures
surrounding set up stuff. There are some development sections that
still need fleshed out.
Many, many links and references in other chapters were affected.
These have been fixed.
A couple style-sheet (*.css) files were also updated to support the
"writernotes" style, which renders paragraph text in red.
(From yocto-docs rev: c4c2a6cf575ce5c783b1cc84d9f7e961aebef49c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Added a new procedure section for using the Downloads page from
the YP website.
(From yocto-docs rev: 7efb29dfa7a0960710ca7cf3983048f166c6a13f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I have added a new procedure on using the Index of Releases area
to get snapshots of various tarballs. I recommend that is not
the way you usually want to get files as using Git is recommended.
The section exists for completeness.
In the ref-manual, I cross-reference the procedures from the
associated conceptual areas.
(From yocto-docs rev: 812f344966966591d883fbebb4ae1f72c11dd483)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I created a new procedure for locating and viewing YP source
repositories using the GUI-based method. Created an anchor in the
ref-manual so I could reference the 'git clone' command.
(From yocto-docs rev: 2ae28682407039420f4fcca71a298e1dd34c81f0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
To move toward a "how-to" dev-manual, I am consolidating procedures
for locating and establishing local copies of YP source files into
a single heading. I set up a "Working With Yocto Project Source
Files" section. This will contain sub-sections to find the various
areas of YP files and how to clone and check out stuff.
(From yocto-docs rev: 87ff4ee41a50e8aed6b9c5402c51bb47f5a252a3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This material was being replicated across the Quick Start,
dev-manual, and ref-manual. I have created a single point in the
ref-manual that collects the disparate information that existed.
I deleted the entire section in the dev-manual since that book
is converting to a procedure manual and the very front of the manual
adequately mentions YP and provides pointers to where the user can
get more information.
The QS provides a more complete introduction of YP since it is a
QS.
(From yocto-docs rev: bd8093417af2d93556410d5482dad32c11a0a964)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE native script now requires a native tool as part
of the command line. I added that to the example.
Removed a bad help command at the end of the section.
(From yocto-docs rev: 5eb965ea51d669ee3bac01050b42bee984572199)
Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
This new section has three new procedures for now: 1)
cloning the poky repository, 2) checking out a branch
based on an upstream repository branch name, and 3)
checking out a branch based on an upstream tag name.
More to be added for other key repositories.
(From yocto-docs rev: 4cbcd952ba395b19be5374470a95630a4bc6ffa7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The "Git" section in the dev-manual is really about concepts.
There are a couple of examples that might or not might be
allowed to ultimately stay. I have moved the section to the
ref-manual. If those examples get replicated in the new
dev-manual, I will update the "Git" section further. For now,
however, these remain in this moved section.
(From yocto-docs rev: 2e4b87fdab29c13ce0d2314e50c93e37404b6f7e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from dev-manual to
ref-manual broke all the links to the "Source Directory" term.
I fixed them.
(From yocto-docs rev: d3a206b141e0b0c623362622ec73bbf44118071a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to
the ref-manual broke a single link to the "build-system-term"
id. I fixed it.
(From yocto-docs rev: 51bbfbb6030a5298fde1dc0e6f67332cfa59fae2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual
to the ref-manual broke the links to the "Metadata" term.
I fixed these.
(From yocto-docs rev: 190da4b4d44952d141db26ca72b5bc1a52d77023)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to the
ref-manual broke several links to the id "build-directory". I fixed
these to reference into the ref-manual now.
(From yocto-docs rev: debe2ae8ce203ebe0f1cee0de54124c15df8bb7e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to
the ref-manual. Doing so caused all the links to the id
"bitbake-term" to break. These had to be individually fixed.
Discovered two unresolved references that were a consequence of
moving that section to the ref-manual. These were fixed as well.
(From yocto-docs rev: 829ca6b64562f00a69f3956e9636c7edaa90ce16)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP doc set was using a link to an out-dated video that
showed how to configure and run Eclipse. The video was very
old and Jessica suggested just removing it. So, I replaced
all occurrences of the link to the up-to-date appendix in the
SDK manual that provides information on the latest supported
version of the Eclipse IDE.
(From yocto-docs rev: b4af1a79078352df5558e20c0b9cfa97fa141abc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to the section on how to set up Eclipse had been broken
for a while. I fixed the link so that it goes to the appropriate
section (appendix) in the SDK manual.
(From yocto-docs rev: 873c2c53f661b18936595068d75b954e07774621)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 98ebe9acccceea2b833c1372a3e664befd1b6aef)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 83a9a3aa5f20c7f389306eea9213eabea997aba1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed some eMenlow stuff
* Cleaned up the description of the BSP structures we have now.
* Various links fixed into the SDK manual.
* Other minor fixes.
(From yocto-docs rev: 5e45005d7ff2254df2754a5ea2d7efd7f1c19a42)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I went through and made some judgement calls on the use of
"native" and "sdknative". I tried to make sure that the reader
understood the real meaning of these terms.
(From yocto-docs rev: d711e8c6dfb32a4ad79e9d11dbf44fbc759d0245)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These kernels are unsupported for the 1.8 release. They will still
show up in the YP source repos but the recipes are removed from the
poky area. Updated all references appropriately.
(From yocto-docs rev: a9adc071409fd31dabc3affec12350c300312600)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the old manual set had worded the use of the
BB_NUMBER_THREADS, PARALLEL_MAKE, and BB_NUMBER_PARSE_THREADS
had become depricated. It suggested a lot of user intervention
to get these variables set to have the build system utilize
optimal parallelism. The change a while back to the build system
where the variables are set to the number of build host cores
now makes the variables automatically be set to their best
values. I have gone through the manual set and changed wordings
appropriately to reflect this.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3a27b1792c92a2f22173315e2732f672cdad2c78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item on supported BSPs was very centric on meta-intel.
I rewrote the section to not be so exclusive.
(From yocto-docs rev: d8118bb6124fbbb2340ae8720cd6187fd5546967)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some links and fixed up some replaceable items.
(From yocto-docs rev: 5c9ce934f13c68c2efbd952f399a8b88e87eb761)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4601]
Added a couple notes saying that you need to be in matching
branches for meta-intel and poky.
(From yocto-docs rev: 02bd63829b1d98f21183a10707753e9767bfe68e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2424]
Some imgage names were cleaned up to have more meaningful names.
These doc changes here take care of changing "core-image-basic"
to "core-image-full-cmdline".
Five instances changed.
(From yocto-docs rev: b758f9645e66867b5728da1dd989bae70a216fcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did a read-through of this chapter in preparation for the YP
1.6 release. Found several little areas that needed attention.
(From yocto-docs rev: 73d56a4c948c675afd4cde0e3321a944a02013cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
