u-boot 2025.10rc2 based firmware from meta-ts
https://gitlab.com/Linaro/trustedsubstrate/meta-ts
triggers some non-fatal errors from various drivers.
Ignore them for now since all other oeqa runtime tests pass
since in genericarm64 we don't build this firmware.
(From meta-yocto rev: fe65e142d0d9ba0e51ff9175ffa82e902f982a20)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With firmware files and more kernel modules the size
limit is hit again. Increase by 60Mb.
(From meta-yocto rev: 4348f496cf4950cf665d7c56643718b5238e96bf)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied from meta-qcom
recipes-bsp/packagegroups/packagegroup-rb3gen2.bb
Sadly does not fully resolve kernel error messages
from WiFi firmware files.
(From meta-yocto rev: 6fd803cd96746cbf3ae625d0fadbb176ce1b2919)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The firmware file is not available from linux-firmware package
so it may be that another file name is used instead. Thus
this non-fatal error can be ignored for now.
(From meta-yocto rev: 2d442f338cbd4a681388c093899a5709b7881d96)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
by default. Fixes parselogs oeqa runtime test failures:
https://ledge.validation.linaro.org/scheduler/job/121516
Central error: brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
...
Central error: brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2
(From meta-yocto rev: dce46431683b5172327770972166c79e4c60cc2d)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
u-boot 2025.10rc2 based firmware from meta-ts
https://gitlab.com/Linaro/trustedsubstrate/meta-ts
triggers some non-fatal errors from various drivers.
Ignore them for now since all other oeqa runtime tests pass
since in genericarm64 we don't build this firmware.
(From meta-yocto rev: 0b15a104ea04acd79b87f7cf3da96f637dafdef4)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With u-boot 2024.04 based firmware the board firmware seems to
have one small issue which kernel complains about. The board
works well and passes other tests so ignore this for now.
(From meta-yocto rev: 56f33867249f79340f868cb90bc7e4c2a6a641d2)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
u-boot 2025.10rc2 based firmware from meta-ts
https://gitlab.com/Linaro/trustedsubstrate/meta-ts
triggers some non-fatal errors from various drivers.
Ignore them for now since all other oeqa runtime tests pass
since in genericarm64 we don't build this firmware.
(From meta-yocto rev: 6fc9c8e2a8b23877c2cd2bac43d37dcaf5b6c8ef)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With config fragments, changing MACHINE in the test like this no
longer works. Use the forcevarable override to allow it to work.
This also needs a tweak to bitbake to work correctly, sent
seperately. Whilst ugly, this avoids the need to start changing
config fragments.
(From meta-yocto rev: 3f56d9e3b1b30116d979a98f7cf765c26996016a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding support for our remaining reference boards with the 6.16
kernel by introducing this bbappend.
We no longer need the patches in the 6.12 kernel bbappend as they've
been pulled into the kernel tree itself.
(From meta-yocto rev: 701ce3b9f197ee957a8853d4f41f040e90ff39fa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta-yocto rev 506379cb241e6a865139307e06216a07f737b602
changed the IMAGE_FSTYPES to wic.zst but did not change
QB_DEFAULT_FSTYPE to match. This is causing the error:
runqemu - ERROR - Failed to find rootfs
Change the QB_DEFAULT_FSTYPE and it works as before (only now runqemu
requires the 'snapshot' parameter).
(From meta-yocto rev: 24857a05b0c2cc70733f245cf9614ef5fb126647)
Signed-off-by: Jon Mason <jon.mason@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to release compressed images since these are much easier for
users to download. Change the default generated output to match this
and build the output we want to release directly.
One test needs tweaking to since it uses an uncompressed image.
(From meta-yocto rev: 506379cb241e6a865139307e06216a07f737b602)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since there are currently multiple breaking changes, update to a new
release series for the next release so layers can show compatibility
correctly.
(From meta-yocto rev: a67bb58ee119d68c4b72bf954b4eb613612a8cc6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the plugin names to account for the "-" to "_" plugin name change.
(From meta-yocto rev: ff4a8af7917d2e7c862d381577219f2c7beff669)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to changes in oe-core for the qemux86* machines, allow users
to set higher tuning levels for the genericx86 targets without changing
the default.
(From meta-yocto rev: 1b29b8168584420a858e2897ba2b0c332dae51bf)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since pmem kernel drivers were enabled as modules, the initrd
size limit is hit. On genericarm64 all kernel modules and some
firmware files get installed to initrd by default which make
the thing large. I'm working on patches to reduce the kernel drivers
installed to initrd and to make the kernel in general more modular
(btrfs 5 Mb etc built into kernel by default). For now just increase
the size limit to unblock genericarm64 builds and testing.
Fixes: https://bugzilla.yoctoproject.org/show_bug.cgi?id=15833
(From meta-yocto rev: 09bef6a491c087f0f0371874e759aae08a720c4e)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The AMD KV260 has a serial console on ttyPS1, so until we can dynamically
detect the console under sysvinit we can add it to SERIAL_CONSOLES so
this platform has a working console when not running systemd.
(From meta-yocto rev: c1824bbee5d7febe4154d683e895470c08b681a9)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The genericarm64 machine sets SERIAL_CONSOLES to a number of potential
devices:
SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;hvc0 115200;ttyS0 115200;ttyS1 115200;ttyS2"
With sysvinit this turns into getty lines in inittab, and with systemd
the systemd-serialgetty recipe creates explicit units to spawn gettys.
This worked fine with 6.6, but since "serial: 8250_omap: Drop
pm_runtime_irq_safe()"[1] in 6.7 onwards we see kernel hangs:
BUG: scheduling while atomic: getty/957/0x00000002
Call trace:
dump_stack+0x1c/0x30
__schedule_bug+0x60/0x90
__schedule+0x83c/0xcf8
schedule+0x40/0x158
schedule_timeout+0xb0/0x1b0
wait_for_completion_timeout+0x84/0x188
ti_sci_set_device_state+0x134/0x220
ti_sci_cmd_get_device_exclusive+0x24/0x40
ti_sci_pd_power_on+0x34/0x68 [ti_sci_pm_domains]
_genpd_power_on+0xa4/0x178
genpd_power_on+0xb4/0x190
genpd_runtime_resume+0xc8/0x260
__rpm_callback+0x54/0x200
rpm_callback+0x78/0x90
rpm_resume+0x420/0x690
__pm_runtime_resume+0x5c/0xb0
omap8250_set_mctrl+0x38/0xe0 [8250_omap]
serial8250_set_mctrl+0x2c/0x60
uart_update_mctrl+0x98/0x120
uart_shutdown+0x124/0x180
uart_hangup+0x7c/0x180
__tty_hangup.part.0+0x408/0x440
tty_vhangup_session+0x24/0x40
disassociate_ctty.part.0+0x48/0x1b0
disassociate_ctty+0x30/0x48
(full backtrace elided)
With many thanks to TI, my understanding is that it was determined that
the problem here is that we have a getty connected to ttyS1 which is
actually the expansion port uart and on the BeaglePlay wired up to the
wifi controller's debug port. The getty receives noise it doesn't know
what to do with, and at some point the power management code does a
suspend/result cycle of the device. The serial drivers assume that
child nodes use the serdev driver and they manage runtime_pm, but the
getty opening the tty breaks a series of bad assumptions in the drivers.
So, there are two bugs:
1) The kernel shouldn't crash if this tty is opened
2) The only serial port for a console on the BeaglePlay is ttyS2,
despite others existing.
TI are looking at (1) and other patches to follow will deal with (2).
Until one of these is resolved entirely, reverting this change to power
management stops the crashes.
[ YOCTO #15704 ]
[1] linux 8700a7ea5519fb0b3bad2362adfeac358c2119ce
(From meta-yocto rev: 49519579f8b6bacf181d2f00bdd256e71d0880c4)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
6.6 has been dropped from OE core master in preparation for the
LTS release, so we drop our reference BSP bbappend as well.
(From meta-yocto rev: e40fb898889254c461b4049d5e457b2270c659c9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Assignment in machine config can not be overwritten in local.conf
because former is evaluated later than latter. Use ?= conditional
assignment for u-boot and qemuboot variables so that they can be
overwritten in local.conf if a different test setup is wanted
for kernel, initrd and rootfs built for genericarm64 machine
config.
(From meta-yocto rev: fbb2b2a2dcfd4dd990071d4d73b149d4099a36ab)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The OEcore SRCREVs now contain the fixes this machine specific
SRCREV was added to incorporate.
Dropping it to ensure that all reference boards are at the same
source and configuration level.
(From meta-yocto rev: 11d690061d67ab0f84265d609e129d8717e88bcb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There have been no specific patches on beaglebone branche for many years,
so I have decided to switch to using the base branch for this machine.
This approach eliminates the need to adjust the corresponding
SRCREV_machine and LINUX_VERSION with each stable kernel version bump.
(From meta-yocto rev: 1570badbf93511f370614c21ccd967af28549b2c)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a bbappend so that genericarm64 can use 6.12.x.
We explicitly set the SRCREV to incorporate some required config fixes
that have not been integrated into the oe-core recipe at this point in
time.
(From meta-yocto rev: 3b6d0ee17ac834a0521223eef67db3d39aaa1b78)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 6.10 reference kernel has been removed from OE core, so
we drop our bbappend.
(From meta-yocto rev: 2a138947d9b2347873db6c9e568d41f9a58f75f7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some boards - such as the BeaglePlay - have the serial console on ttyS2.
Add a few ttyS? consoles to SERIAL_CONSOLES to cater for these boards.
(From meta-yocto rev: 6732332ef6ff640189e51ef6839598be693fd9e1)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 6.10 build has been tested on both a BeaglePlay and qemu, so we can
remove the pinning now.
(From meta-yocto rev: d19d6046e96b1c94ee50a6140b1338a50a2cef20)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only the tested machines are uncommented, so that people don't try to use
the untested machines but it's easy to enable them for testing.
KBRANCH is no longer set as all of the machines use standard/base, which
is the default from the linux-yocto recipe.
(From meta-yocto rev: 57de8f6e5085b57dd4ccfab8f0994ae6c4ee55a4)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to introduce the 6.10 linux-yocto recipe, but genericarm64
hasn't been valided for it yet. As such, let's temporarily set the
preferred version to 6.6 so the builds don't break.
(From meta-yocto rev: 6ba3b6f15bf2460432da3a3aee782976e778381c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
genericarm64 supports runqemu, so testimage should work. However, out of
the box it does not:
runqemu - ERROR - BIOS .../tmp/deploy/images/genericarm64/u-boot.bin not found
That is because we make the user explicitly build the qemu-targetting u-boot
to avoid the confusing situation where they have real hardware but the
deploy directory contains a u-boot for qemu.
In automated testing situations, however, we can be a bit more helpful
and make testimage depend on u-boot. This will lead to u-boot binaries
being in deploy, but at this point the user is already running the images
inside a qemu.
Reported-by: James McGregor <James.McGregor2@arm.com>
(From meta-yocto rev: 90b45c62d34396a20078b55d7d36f66b4e2177f7)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since ssh-pregen-hostkeys is now restricted to qemu machines, add in configuration
allowing it to become available for this test on genericx86-64.
(From meta-yocto rev: b65a1e39dea6d215221f400709f7f3f4c110a948)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage on core-image-sato fails in parselogs and xorg tests. We can
add the virtio gpu to address these issues (like what is being done in
qemuarm, qemuarm64, and qemuarmv5).
(From meta-yocto rev: ddf075e2abfba6479efc2bc5fe1c41ba6079e355)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For those crazy enough to want to use/test the latest development kernel
for genericarm64, enable it by adding the COMPATIBLE_MACHINE and
KMACHINE.
NOTE: not using the KBRANCH, as neither does the linux-yocto_%.bbappend.
It is taking the default one from the relevant recipe.
(From meta-yocto rev: 85809c64b645ccca4f075e95b86df56d4f858e67)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is has a .md extension so it's meant to be Markdown. Reformat
it so that it's actually Markdown.
(From meta-yocto rev: 53470f2050efeb09935c238f22ce62a0185d0e13)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A basic SystemReady IR system can be provided by qemu-system-aarch64
and u-boot, so tell u-boot to build the qemu_arm64 machine and configure
qemuboot to start that u-boot and search the virtio-attached wic image
for the EFI boot partition.
Currently this machine support emulated (Cortex-A76) and virtualised (KVM)
execution, and virtio storage/network/console. Display support will be
added shortly.
Note that this machine still doesn't build U-Boot by default, as a u-boot
binary for qemu in deploy would potentially confuse users who want to
boot on real hardware and think this u-boot is needed. If you wish to
use genericarm64 with runqemu, you'll need to manually bitbake u-boot.
(From meta-yocto rev: cd40f405844c1ccfabcbe64ad6be5d98d0221f72)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating linux-yocto/6.6 to the latest korg -stable release that comprises
the following commits:
06644f0d7193 drm/tilcdc: Set preferred depth
62e5ae5007ef Linux 6.6.21
d6ac0ee5ff95 drm/nouveau: don't fini scheduler before entity flush
ece1aaec7f7e selftests: mptcp: rm subflow with v4/v4mapped addr
8e7f31bf1101 selftests: mptcp: add mptcp_lib_is_v6
9d71f43afd89 selftests: mptcp: update userspace pm test helpers
f9190d7995a7 selftests: mptcp: add chk_subflows_total helper
ae1fa39da991 selftests: mptcp: add evts_get_info helper
e81742f6e2eb KVM/VMX: Move VERW closer to VMentry for MDS mitigation
ae46691220f7 KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH
7a62647efcb2 x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key
ca13d8cd8dac x86/entry_32: Add VERW just before userspace transition
7caf330faf16 x86/entry_64: Add VERW just before userspace transition
2664bb298cdf block: define bvec_iter as __packed __aligned(4)
21bbe847686c gpio: fix resource unwinding order in error path
9c7c16109b71 gpiolib: Fix the error path order in gpiochip_add_data_with_key()
92515c4ef1b4 gpio: 74x164: Enable output pins after registers are reset
6b6282d56b14 powerpc/rtas: use correct function name for resetting TCE tables
d4d1e4b1513d powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
5e3022ea42e4 dmaengine: idxd: Ensure safe user copy of completion record
4d6e793eacfb dmaengine: idxd: Remove shadow Event Log head stored in idxd
981917766b59 phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes
d24fe6d5a1cf dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
227ef58a9b0c dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
55501b7359ef dmaengine: dw-edma: Add HDMA remote interrupt configuration
3fa3dfcabf3a dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
8b5657ac34b7 dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
3adea99aa756 dmaengine: dw-edma: Fix the ch_count hdma callback
57e869be88d0 ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()
e9eac260369d af_unix: Drop oob_skb ref before purging queue in GC.
69e0f04460f4 af_unix: Fix task hung while purging oob_skb in GC.
be8a177250b2 NFS: Fix data corruption caused by congestion.
fa8c776f4c32 mptcp: fix possible deadlock in subflow diag
ce0809ada38d mptcp: fix double-free on socket dismantle
b609ecda2d76 mptcp: fix potential wake-up event loss
ae5530ccd5ef mptcp: fix snd_wnd initialization for passive socket
536a661bfdf4 selftests: mptcp: join: add ss mptcp support check
48428b07de4f mptcp: push at DSS boundaries
fca4e6ab0681 mptcp: avoid printing warning once on client side
a49ecbe8d0f0 mptcp: map v4 address to v6 when destroying subflow
dff60a5531b5 x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
c43b984f0b23 x86/e820: Don't reserve SETUP_RNG_SEED in e820
d2a9510c0e39 mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
e9eeb0dddf61 pmdomain: qcom: rpmhpd: Fix enabled_corner aggregation
71da10e633a9 efivarfs: Request at most 512 bytes for variable names
f1fb745ee0a6 iommufd: Fix iopt_access_list_id overwrite bug
8db4f87fa3e1 kbuild: Add -Wa,--fatal-warnings to as-instr invocation
9537603a5436 riscv: add CALLER_ADDRx support
0c8a3d3354cd RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
aebd67a52edd mmc: sdhci-xenon: fix PHY init clock stability
b4eacb32e066 mmc: sdhci-xenon: add timeout for PHY init complete
4344444255a3 mmc: core: Fix eMMC initialization with 1-bit bus connection
176e66269f0d mmc: mmci: stm32: fix DMA API overlapping mappings warning
a69c8bbb9469 dmaengine: fsl-qdma: init irq after reg initialization
91b001fb0b08 dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
4e0fe154be7b dmaengine: ptdma: use consistent DMA masks
1291d278b557 crypto: arm64/neonbs - fix out-of-bounds access on short input
5b696e9c3882 dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
737d2e9300cd soc: qcom: pmic_glink: Fix boot when QRTR=m
82dacc26e15c drm/amd/display: Add monitor patch for specific eDP
5e476625fa8a drm/buddy: fix range bias
baac292852c0 Revert "drm/amd/pm: resolve reboot exception for si oland"
202e4f4bb858 btrfs: send: don't issue unnecessary zero writes for trailing hole
b1690ced4d2d btrfs: dev-replace: properly validate device names
eb3441093aad btrfs: fix double free of anonymous device after snapshot creation failure
177d574be4b5 wifi: nl80211: reject iftype change with mesh ID change
ad8ff8cff38d mtd: rawnand: marvell: fix layouts
ba60fdf75e89 mm: cachestat: fix folio read-after-free in cache walk
93dd420bc415 gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
f4906938bdd4 landlock: Fix asymmetric private inodes referring
0be289ba41bb Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
a4904b3afed0 ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8
5cdf76fbbed9 ALSA: hda/realtek: fix mute/micmute LED For HP mt440
46fb5e7ec337 ALSA: hda/realtek: Enable Mute LED on HP 840 G8 (MB 8AB8)
d6ac6ffbdc39 ALSA: hda/realtek: tas2781: enable subwoofer volume control
bb06ffbf3862 ALSA: ump: Fix the discard error code from snd_ump_legacy_open()
22df6ff560c5 ALSA: firewire-lib: fix to check cycle continuity
2caa60507948 tomoyo: fix UAF write bug in tomoyo_write_control()
6f72b4458ead of: property: fw_devlink: Fix stupid bug in remote-endpoint parsing
d43f8e58f10a btrfs: fix race between ordered extent completion and fiemap
a278d5c60f21 riscv: Sparse-Memory/vmemmap out-of-bounds fix
eb2571673cfc riscv: Fix pte_leaf_size() for NAPOT
2b7ce74e19fc Revert "riscv: mm: support Svnapot in huge vmap"
e0d17ee872cf drivers: perf: ctr_get_width function for legacy is not defined
2f8c09478a2c drivers: perf: added capabilities for legacy PMU
f67898867b6b afs: Fix endless loop in directory parsing
73a6bd68a134 fbcon: always restore the old font data in fbcon_do_set_font()
8e8c66afe27b drm/tegra: Remove existing framebuffer only if we support display
274bf3cca13f RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
fb3618f6bd49 ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()
4b5d89ace3ce ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization
9f05fe599965 ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
c249f04f2bff ASoC: cs35l56: Fix for initializing ASP1 mixer registers
044edc12fe01 ASoC: cs35l56: Don't add the same register patch multiple times
a2f0a6846da8 ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
93fc01f9b58d ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
cc698db49b93 riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
99adc8b4d2f3 ASoC: qcom: Fix uninitialized pointer dmactl
841361d88fae ASoC: qcom: convert not to use asoc_xxx()
c92c96cda3e3 ASoC: soc.h: convert asoc_xxx() to snd_soc_xxx()
ac549defb351 ALSA: Drop leftover snd-rtctimer stuff from Makefile
4a7f5eff429b ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESET
fbca8bae1ba7 power: supply: bq27xxx-i2c: Do not free non existing IRQ
11aabd748785 efi/capsule-loader: fix incorrect allocation size
81be85353b0f tls: fix use-after-free on failed backlog decryption
dec5b6e7b211 tls: separate no-async decryption request handling from async
11121c2ce571 tls: fix peeking with sync+async decryption
c19fdb06d3d7 tls: decrement decrypt_pending if no async completion will be called
9422350aea63 net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
c88bf996e88b igb: extend PTP timestamp adjustments to i211
167d8642daa6 rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
dbc81b032dd0 tools: ynl: fix handling of multiple mcast groups
80cd0487f630 netfilter: bridge: confirm multicast packets before passing them up the stack
98567dc7973f netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
39e39c34abb5 Bluetooth: qca: Fix triggering coredump implementation
c50ce483c28a Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
fb3e827badce Bluetooth: qca: Fix wrong event type for patch config command
dcd646f40a56 Bluetooth: Enforce validation on max value of connection interval
fba268ac36ab Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
4a9139678ede Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
6699d7ce263c Bluetooth: hci_sync: Fix accept_list when attempting to suspend
2ab9a19d896f Bluetooth: Avoid potential use-after-free in hci_error_reset
0a07fa1f61e4 Bluetooth: hci_sync: Check the correct flag before starting a scan
699b103e48ce stmmac: Clear variable when destroying workqueue
af6dfe9e9551 uapi: in6: replace temporary label with rfc9486
2ae3d9d1d8da net: lan78xx: fix "softirq work is pending" error
0ec3ea616a50 net: usb: dm9601: fix wrong return value in dm9601_mdio_read
2d8003e55d12 veth: try harder when allocating queue memory
288218b1dd26 lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected
44112bc5c74e ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()
16edf51f33f5 net: veth: clear GRO when clearing XDP even when down
1a8682737600 cpufreq: intel_pstate: fix pstate limits enforcement for adjust_perf call back
7322b217c6f0 tun: Fix xdp_rxq_info's queue_index when detaching
fbccbb4215ae net: dpaa: fman_memac: accept phy-interface-type = "10gbase-r" in the device tree
cbebc55ceace net: mctp: take ownership of skb in mctp_local_output
a0a1db40b23e net: ip_tunnel: prevent perpetual headroom growth
a2ab02815184 netlink: add nla be16/32 types to minlen array
d3ada42e534a netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter
03f1573c9587 spi: cadence-qspi: fix pointer reference in runtime PM hooks
c53b8d8f70c4 mtd: spinand: gigadevice: Fix the get ecc status issue
8cb8ef0c79e3 ublk: move ublk_cancel_dev() out of ub->mutex
2b5f1692a95b ksmbd: fix wrong allocation size update in smb2_open()
05059601518e ASoC: cs35l34: Fix GPIO name and drop legacy include
d3d782b5a5d3 ubifs: fix possible dereference after free
ff7ae7b32324 crypto: jitter - add RCT/APT support for different OSRs
50cd24ddb6f0 arm64: defconfig: remove CONFIG_IPQ_APSS_5018
58e5c91d6701 x86/alternatives: Disable interrupts and sync when optimizing NOPs in place
c878fd2d4c79 x86/alternatives: Sync core before enabling interrupts
c2d64b9f52b6 qemux86: add configuration symbol to select values
630c33229e6d sched/isolation: really align nohz_full with rcu_nocbs
0e5e0f68e2e6 clear_warn_once: add a clear_warn_once= boot parameter
46934791b902 clear_warn_once: bind a timer to written reset value
cdee9e38ff32 clear_warn_once: expand debugfs to include read support
82b562b81841 tools: Remove some options from CLANG_CROSS_FLAGS
36dc380b776b libbpf: Fix build warning on ref_ctr_off
9e3e1fe20982 perf: perf can not parser the backtrace of app in the 32bit system and 64bit kernel.
e497a4a5da65 perf: x86-32: explicitly include <errno.h>
7b57ddd89565 perf: mips64: Convert __u64 to unsigned long long
1cfc19423dc7 perf: fix bench numa compilation
98bc2815fade perf: add SLANG_INC for slang.h
17209a70b9b3 perf: add sgidefs.h to for mips builds
9cd4258d910a perf: change --root to --prefix for python install
8110a4f26628 perf: add 'libperl not found' warning
bc89d5e08f77 perf: force include of <stdbool.h>
4f6c760cc876 fat: Replace prandom_u32() with get_random_u32()
bc53117b12b2 fat: don't use obsolete random32 call in namei_vfat
30b2236ab378 FAT: Added FAT_NO_83NAME
cef98d22b4ed FAT: Add CONFIG_VFAT_NO_CREATE_WITH_LONGNAMES option
0bbd7daba9e1 FAT: Add CONFIG_VFAT_FS_NO_DUALNAMES option
5883fc340084 aufs6: adapt to v6.6 i_op->ctime changes
c4342d979bf2 aufs6: fix magic.mk include path
35266bc2dc81 aufs6: adapt to v6.6
8edede4e98be aufs6: core
712248233ebe aufs6: standalone
3b71a8a848d8 aufs6: mmap
3e2924871f37 aufs6: base
7f4907a93101 aufs6: kbuild
d2f7b03e4aa7 yaffs2: update VFS ctime operations to 6.6+
bcd6cfcd1aa0 yaffs2: v6.5 fixups
cc615704b5f5 yaffs2: Fix miscalculation of devname buffer length
8ef2e22dcf91 yaffs2: convert user_namespace to mnt_idmap
c9c749f9f7d3 yaffs2: replace bdevname call with sprintf
395b01cdc39d yaffs2: convert read_page -> readfolio
d98b07e43ba6 yaffs: replace IS_ERR with IS_ERR_OR_NULL to check both ERR and NULL
613c6d50fdbe yaffs: fix -Wstringop-overread compile warning in yaffs_fix_null_name
622c4648936f yaffs2: v5.12+ build fixups (not runtime tested)
7562133d4090 yaffs: include blkdev.h
dbd44252cd59 yaffs: fix misplaced variable declaration
c223a10b1ac0 yaffs2: v5.6 build fixups
90f6007cfbf4 yaffs2: fix memory leak when /proc/yaffs is read
37ee169c5ea1 yaffs: add strict check when call yaffs_internal_read_super
b6e007b8abb6 yaffs: repair yaffs_get_mtd_device
fb98f65a466a yaffs: Fix build failure by handling inode i_version with proper atomic API
51e0aac75ea2 yaffs2: fix memory leak in mount/umount
2b74a0cae7b0 yaffs: Avoid setting any ACL releated xattr
ff4130a9c376 Yaffs:check oob size before auto selecting Yaffs1
ba95b409c67c fs: yaffs2: replace CURRENT_TIME by other appropriate apis
8fa35eba9056 yaffs2: adjust to proper location of MS_RDONLY
1eb5deaad8c4 yaffs2: import git revision b4ce1bb (jan, 2020)
4dce67c1e8c8 initramfs: allow an optional wrapper script around initramfs generation
2f603d83fcc4 pnmtologo: use relocatable file name
664a6a0a484b tools: use basename to identify file in gen-mach-types
9de64bc0c185 lib/build_OID_registry: fix reproducibility issues
ae9b80797295 vt/conmakehash: improve reproducibility
a972323151bd iwlwifi: select MAC80211_LEDS conditionally
15d2adcc0198 net/dccp: make it depend on CONFIG_BROKEN (CVE-2020-16119)
5556a6c04b19 arm64/perf: Fix wrong cast that may cause wrong truncation
5552dc768ffc defconfigs: drop obselete options
00fe4152df31 arm64/perf: fix backtrace for AAPCS with FP enabled
3888d0652edf linux-yocto: Handle /bin/awk issues
3d55d299f23a uvesafb: provide option to specify timeout for task completion
23c068c080be uvesafb: print error message when task timeout occurs
edbfc939266e compiler.h: Undef before redefining __attribute_const__
c99ae7e2a19a vmware: include jiffies.h
572d84d928c8 Resolve jiffies wrapping about arp
fdcd47cac843 nfs: Allow default io size to be configured.
927d48801098 check console device file on fs when booting
57cc27f821dd mount_root: clarify error messages for when no rootfs found
1b53d82a8152 mconf: fix output of cflags and libraries
1811da09f42c menuconfig,mconf-cfg: Allow specification of ncurses location
83c2e0c6eb1f modpost: mask trivial warnings
6de673039484 kbuild: exclude meta directory from distclean processing
6decd32815f5 powerpc: serialize image targets
f6b683b38318 arm: serialize build targets
e798b09ebf57 mtd_blkdevs: add mtd_table_mutex lock back to blktrans_{open, release} to avoid race condition
dc8a1e5a88f8 x86_64_defconfig: Fix warnings
68491e5f72b6 powerpc/ptrace: Disable array-bounds warning with gcc8
d71ebfce3004 powerpc: Disable attribute-alias warnings from gcc8
62f50884b8b1 powerpc: kexec fix for powerpc64
da6871c62c37 powerpc: Add unwind information for SPE registers of E500 core
f161c880c11d mips: make current_cpu_data preempt safe
5e94a8247ce7 mips: vdso: fix 'jalr $t9' crash in vdso code
19e36714b1c7 mips: Kconfig: add QEMUMIPS64 option
e2e537db3cbd 4kc cache tlb hazard: tlbp cache coherency
aee9870611e5 malta uhci quirks: make allowance for slow 4k(e)c
881948cd1517 drm/fb-helper: move zeroing code to drm_fb_helper_fill_var
98ec1963fcb7 arm64: defconfig: cleanup config options
f1727c537ba8 vexpress: Pass LOADADDR to Makefile
4474c32dc24a arm: ARM EABI socketcall
75e31a2b70fd ARM: LPAE: Invalidate the TLB for module addresses during translation fault
(From meta-yocto rev: 8fcd4ad918835818ebb3280803c952c55f1eee03)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't override KBRANCH/SRCREV/LINUX_VERSION, instead use the values in
the base oe-core linux-yocto recipe.
The advantage of this is that we don't need to update this file every
time the kernel is upgraded in oe-core.
(From meta-yocto rev: 91c4efe03d96bee555b0c6581f3fae1145e75a68)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the COMPATIBLE_MACHINE assignments to the top of the file as they
effectively control what machines this bbappend is for.
(From meta-yocto rev: b9c5cd28856d2b86fb00b5c90d346638bf729c29)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't install _all_ of the firmware, as that's huge (almost 1GB). Instead
install a few pieces of firmware for common hardware.
Also use the same list of packages to populate the initramfs, so there's
no need to manually sync the package lists (as initramfs doesn't install
the MACHINE_EXTRA_RRECOMMENDS automatically).
(From meta-yocto rev: a5aa914990f36cc5175577983dd1ad1aa0bb81f2)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the root partition at the end of the disk so that it can be easily
resized.
(From meta-yocto rev: e2d7f203a08170481e75d43246beda7b1af1d5f2)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a new 64-bit "generic" Arm machine, that expects the hardware to
be SystemReady IR compatible.
(From meta-yocto rev: 68de209f58917d8e7108caacfefc55bbe0e0c5a2)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prepare for the scarthgap release.
(From meta-yocto rev: 5be4f867a3fba39103a569eb4ecf10c39eca3742)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
