Updates within bitbake now require this call to be triggered somewhere with
floating git source revs. Add the missing call. Issue can be reproduced with:
devtool check-upgrade-status dbus-wait
(From OE-Core rev: d7088b2b5012f9e386914a6837685f5869379cc5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was prompted by ltp's unreasonably long package_qa times; it has
a massive amount of executables and insane runs objdump for all of
them, serially.
This reduces the time from 4 minutes to 1m20s on my machine.
(From OE-Core rev: fac984b99fdb46949879516cb87153860f402c75)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the set helper for list properties to allow list members to be
replaced with a new list. This is necessary as it is (currently) the
only way to replace the default value for a list member.
(From OE-Core rev: 8280b857c510646cd10167dd2ea9a0c2d5f1e800)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prelink is being dropped by glibc in 2.36. It already causes issues with
binary corruption, has a number of open bugs and is of questionable benefit
without disabling load address randomization and PIE executables.
We disabled it by default a while back but left people able to use it.
We would be unable to maintain it alone without glibc support so remove
the remaining pieces.
(From OE-Core rev: 23c0be78106f1d1e2bb9c724174a1bb8c56c2469)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Native task outputs are directly run on the build system during the build
after being built. Even if the output of a native recipe doesn't change, a
change in one of its dependencies may cause a change in the output it
generates (e.g. rpm output depends on the output of its dependent zstd
library).
This can cause poor interactions with hash equivalence, since this
recipe's output-changing dependency is "hidden" and downstream tasks only
see that this recipe has the same outhash and therefore is equivalent.
This can result in different output in different cases and issues with
reproducible builds in parcular (e.g. rpm compression changes for the same
content).
To resolve this, unhide the output-changing dependency by adding it's
unihash to this tasks outhash calculation. Unfortunately, we don't know
specifically know which dependencies are output-changing, so we have to
add all of them.
[YOCTO #14685]
(From OE-Core rev: d6c7b9f4f0e61fa6546d3644e27abe3e96f597e2)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extend runstrip() to accept additional argument to enable
sharing it with the kernel do_strip() so that
KERNEL_IMAGE_STRIP_EXTRA_SECTIONS can be passed.
Since is_elf() understands kernel modules there is no need to keep a
seperate list for kernmodules or hardcode the values to runstrip.
(From OE-Core rev: e09a8fa931fe617afc05bd5e00dca5dd3fe386e8)
Signed-off-by: Saul Wold <saul.wold@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since honister host manifest stopped to generate, i.e.
manifest file is empty but all ipks/files into sdk is
ok.
(From OE-Core rev: 79a2392f5d2a4cb6509a83afb40bca01bac59914)
Signed-off-by: Oleksiy Obitotskyy <oobitots@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If PATCHTOOL="git" has been specified but workdir is not git repo
bitbake fails to apply the patches with error message:
Command Error: 'git rev-parse --show-toplevel' exited with 0 Output:
fatal: not a git repository (or any of the parent directories): .git
Fix this by initializing the repo before patching.
This allows binary git patches to be applied.
(From OE-Core rev: 6184b56a7a0fc6f5d19fdfb81e7453667f7da940)
Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
distutils is going away and we have functionality in bitbake which can
handle these comparisions so switch to the bb.utils function.
(From OE-Core rev: fe624b520e6c75e16a8f394785ab0216341402f9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Larger systems may have large numbers of cores, but beyond a certain
point they can't all be used for compiling: whilst purely
compute-intensive jobs can be parallelised to hundreds of cores,
operations such as compressing (needs lots of RAM) or compiling (lots of
I/O) don't scale linearly.
For example, the Marvel ThunderX2 has 32 cores, each capable of
executing four threads, and can be configured with two sockets, making
256 CPUs according to Linux. Zstd using 256 threads has been seen to
fail to allocate memory during even small recipes such as iso-codes.
Add a default cap of 64 CPUs to the cpu_count() method so that extreme
parallisation is limited. 64 is high enough that meaningful gains
beyond it are unlikely, but high enough that most systems won't be
effected.
(From OE-Core rev: 765d0f25ce48636b1838a5968e2dc15de2127428)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When looking at logs involving thread pools it is useful if the threads
can be named.
(From OE-Core rev: 18342945b021608794d83ecf567afd43f4379b24)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Application can depend on several overlayfs mount points. Provide a
systemd unit application can depend on to make sure all overlays are
mounted before it is started to avoid any race conditions
(From OE-Core rev: b38e194db0c6825f28c56123cf88af94d3f52beb)
Signed-off-by: Bruno Knittel <Bruno.Knittel@bruker.com>
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having annotations on relationship can provide additional information
about the relationship such as how it was derived.
(From OE-Core rev: d98585aa89e1d3819f8139a07fb7376ef89b37f8)
Signed-off-by: Saul Wold <saul.wold@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the function a ThreadedWorker is executing raises an exception, don't
use print() as that mostly disappears. Instead, output it to the logger.
This is done using bb.mainlogger.debug directly instead of bb.debug() as
this allows us to pass the exception instance directly, which is then
incorporated into the log stream.
(From OE-Core rev: 2f1ea25c222b344dd8b784b2bc73a6540ab30274)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extract package_qa_write_error, package_qa_handle_error and
package_qa_add_message functions from insane.bbclass to lib/oe/qa.py and
drop the package_qa_ prefixes.
Update various bbclasses to use the new functions. No import is required
since base.bbclass puts oe.qa in OE_IMPORTS.
Stop requiring callers to manually track whether a fatal error has been
encountered via a "sane" flag. Instead replace the QA_SANE variable with
QA_ERRORS_FOUND and call oe.qa.exit_if_errors or
oe.qa.exit_with_message_if_errors at the end of each task.
Inspired by discussion resulting from
https://lists.openembedded.org/g/openembedded-core/message/156793 and
https://lists.openembedded.org/g/openembedded-core/message/156900
(From OE-Core rev: f0ad152ef4cc15c042bc9eeefb6af096d054b220)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want things to be reproduicble and the variable doesn't really change
much any more. Drop the remaining uses and make those code paths always
active.
(From OE-Core rev: d15fb02c7ee7da50e322d74bc6a545234e20c7f3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reproducibility is here to stay and needs to be part of our default workflow.
Move the remaining code to base.bbclass so it is always a first class citizen
and it is clear people need to be mindful of it.
(From OE-Core rev: abb0671d2cebfd7e8df94796404bbe9c7f961058)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To try and avoid parse/memory overhead of functions within bitbake,
move the bulk of the reproducibility functions to the function library.
(From OE-Core rev: f2fd1c9d75e774c8a5271cdc1ec6f65c4492f941)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow a user to validate sstate objects against a list of keys, instead
of just any known key in the user's keychain.
(From OE-Core rev: 52ba0c5e6e2e3d5d01dc3f01404f0ab1bb29b3b5)
Signed-off-by: Daniel McGregor <daniel.mcgregor@vecima.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since Python 3.8 visit_Num(), visit_Str() and so on are all deprecated
and replaced with visit_Constant. We can't yet remove the deprecated
functions until we require 3.8, but we can implement visit_Constant to
silence the deprecation warnings.
(From OE-Core rev: abc93390a3f19bc4cc159c5690a478b9e2270906)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, installed packages are listed for images in image-info.txt, but
not for SDKs in sdk-info.txt. Add TOOLCHAIN_HOST_TASK and
TOOLCHAIN_TARGET_TASK to the output variables in sdk-info.txt.
Moreover, package output files for the SDK host are empty because
PKGDATA_DIR defaults to the target directory. Fix this bug and create a new
variable called PKGDATA_DIR_SDK which stores the correct path for the SDK
host package data.
(From OE-Core rev: 82e6172c1df378dff4e503aa878501c08937b5bb)
Signed-off-by: Andres Beltran <abeltran@linux.microsoft.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We hardlink some files into the build, such as licence files in
do_populate_lic tasks. Depending on the umask that the source tree
was checked out with, the group permissions would vary. This
results in inconsistent task outhashes.
Avoid this by ignoring the group/other bits unless we're under
pseudo context.
Bump the ABI numbers to ensure we don't see cache corruption from
earlier builds.
(From OE-Core rev: 2bd9c806de7e5197168360e3bd1d223a04a92291)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some files in the populate_sysroot tasks have hardcoded paths in them,
particularly if they are postinst-useradd- files or crossscripts.
Add some filtering logic to remove these paths.
This means that the hashequiv "outhash" matches correcting in more
cases allowing for better build artefact reuse.
To make this work a new variable is added SSTATE_HASHEQUIV_FILEMAP
which maps file globbing to replacement patterns (paths or regex)
on a per sstate task basis. It is hoped this shouldn't be needed
in many cases. We are in the process to developing QA tests which
will better detect issues in this area to allow optimal sstate
reuse.
(From OE-Core rev: d9852ffbbe728dac33dc081538a08af98f52fd4a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 2a76082363d189880613765ad339718e3614049d.
We have an issue where x86 host builds are not matching hashes with
aarch64 host builds. We'd expect that for a given target, the target
artefacts should work regardless of the host architecture, compiler
version etc. but this isn't happening and the hashes are differing.
This is due to issues from hash equivalence.
I believe the commit being reverted was added as a test and there were
other fixes at the time which resolved these issues.
As illustration of that, different gcc versions are not cauing issues
with hash equivalence. That should be similar to the aarch64 case vs.
x86-64 and hence if we're not seeing gcc verison issues, we also don't
need this special case. As such, revert it as we don't need it and it
is in fact breaking sstate reuse cross platform.
[YOCTO #14578]
(From OE-Core rev: be67dc551ca15a6f19855e8e99848aab2a33800d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds several comments to this file to explain the intention and how it
should be used
(From OE-Core rev: 0be0ba70e68b57a3617d3c1ea4b6233b37d5d648)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is added to allow the create-spdx code to create annotations
that store values properly according to the SPDX Specification.
Initialy they will be used to track if a recipe is a native type.
(From OE-Core rev: 8db551bba619f3b3612c59270043148214a462cc)
Signed-off-by: Saul Wold <saul.wold@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
collections.abc is available since 3.3 and doesn't need special handling.
(From OE-Core rev: 01152c9410ba00274c8415a5d914dc33dfd0cf46)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package task references WORKDIR at it's top level and we can't
easily make the timestamp for that determnistic due to writes to files
there and in other subdirs. We could try and force it to a specific value
but it is easier to just remove it from the package task, we don't need
it there or care about it in this case.
(From OE-Core rev: 9cceeb906527f90d8dd3aad75aa3a8805e2a1df5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Repo-wide replacement to use newer variable to represent systemd
system unitdir directory.
(From OE-Core rev: 5ace3ada5c54500c71becc8e0c6eddeb8bc053e3)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Licenses reported in the SPDX documents should be either:
A) A valid SPDX identifier cross referenced from the SPDX license
database
B) A "LicenseRef" to a license described in the SPDX document
The licensing code will now add a placeholder extracted license with
corresponding "LicenseRef" for any licenses that are not matched to the
SPDX database
Parenthesis in the license expression are now handled correctly
(From OE-Core rev: 28d9d035c0ff8fcaf28bc96a976a43a602a47e94)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds extended package data which is encoded as JSON which allows it to
encode more structure than the "flat" package data files. The extended
data might be much larger than the standard package data, so it is not
read by default and instead requires
oe.packagedata.read_subpkgdata_extended() to be called
Currently, the file sizes and ELF debug sources are saved off into the
extended package data
(From OE-Core rev: db9cf430e54ae68da80fbc3fba80ce88d8df164d)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Saul Wold <saul.wold@windriver.com>
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, depends.dot includes per-file dependencies but not the packages
providing those files. This makes it hard to obtain all package
dependencies by just looking at depends.dot.
Parse the RPROVIDES and FILERPROVIDES fields from pkgdata to map each of
their values to the package providing the component. Include runtime
packages as dependencies in depends.dot, together with the component
provided by the package as a label.
(From OE-Core rev: 2ba33093017574bbe29eeba699eb90628614d03a)
Signed-off-by: Andres Beltran <abeltran@linux.microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is a follow on of the the PR server rework in bitbake to add
read-only support. The shift to using the bb.asyncrpc code in the PR
server and client brings issues with respect to reuse of the same
asyncio loop in different processes. This patch removes the PR service
connection caching to avoid one source of this problem. It is believed
that in practice this should have little impact on overall performance.
(From OE-Core rev: 0fc3055027e2a76ac863f1c0e0d52e95748066aa)
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix read_subpkgdata_dict to account for the new override operator being
":" instead of "_"
(From OE-Core rev: 0b04ae769d4fad2caaa858803d8fbbbaec689541)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moving the function will allow other classes to capture which CVEs have
been patched, in particular SBoM generation.
Also add a function to capture the CPE ID from the CVE Product and
Version
(From OE-Core rev: 75d34259a715120be1d023e4fd7b6b4b125f2443)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The automated conversion of OE-Core to use the new override sytax isn't
perfect. This patches some mis-converted lines and some lines which were missed
by the automation.
(From OE-Core rev: 4e9a06b64b43131b731fb59a0305f78a98e27fbd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the result of automated script conversion:
scripts/contrib/convert-overrides.py <oe-core directory>
converting the metadata to use ":" as the override character instead of "_".
(From OE-Core rev: 42344347be29f0997cc2f7636d9603b1fe1875ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removes the /var/cache/ldconfig auxiliary cache directory from
the rootfs when:
- read-only-rootfs is in IMAGE_FEATURES,
- ldconfig is not in DISTRO_FEATURES.
In both cases the /var/cache/ldconfig/aux-cache is useless.
(From OE-Core rev: e7a18904582b27fd12a437ff4d8d25c625af7696)
Signed-off-by: Damian Wrobel <dwrobel@ertelnet.rybnik.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When attempt_only flag is set to True all installation failures are
ignored. Disable attempt_only, that is the default in install function,
to raise error in install_complementary and to prevent do_populate_sdk
task to treat errors as warnings.
[RP: Historically some of our addtional packages were in bad shape and
wouldn't all install. This is no longer the case so we shouldn't need
a hack like this any longer.]
(From OE-Core rev: 8042ad9ca91ddaaf741366e1068c63c284ff98f5)
Signed-off-by: Fabio Berton <fabio.berton@criticaltechworks.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds an option to strip a prefix from the paths reported in
buildhistory. This makes it easier to compare task signatures in the
build history when the builds were done from different directories.
(From OE-Core rev: 194e7a29212c4a29222730f47d3133dfe92447c1)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* all known issues in this area were fixed, make it fatal that it
cannot be overlooked if someone triggers this issue again
(From OE-Core rev: 64b89f3c8fc31842256c482a3039d90d3f12c1cc)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
