Where recipes use S = ${WORKDIR}, change them to set UNPACKDIR to
a subdir of WORKDIR and make S point at this instead.
I've chosen not to force S into any standard UNPACKDIR we may pick in
future just so the S = UNPACKDIR case is clearly visible by the
directory naming under WORKDIR as that should aid usability.
(From OE-Core rev: d9328e3b0b062f0621de3d114584b44f384a1c02)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Where recipes use S = ${WORKDIR}, ensure they are referencing ${S} correctly
to access files as soon we want to stop doing this in WORKDIR at which point
they would break unless corrected.
(From OE-Core rev: f25dd633fffe6560f191526d1869e657e129bad9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run-postinsts is installed, a service is added for system which can run
while the package is still being installed. This calls "opkg configure" and if
package management is still running, it can deadlock and error.
To work around this, call fcntl-lock on the opkg lock file and if the lock
was held, it would wait to obtain it. This wait gives the package management
time to finish the install before the configure can then take the lock and run.
Note the dependency in SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS otherwise we'd see
sstate selftest failures.
Also ensure that if the configure fails, the scripts returns an error. This
applies to opkg and dpkg.
(From OE-Core rev: 96d37df074dc1fe1578c1406235dff7e328b62b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been removing PR values from recipes at upgrade time for a while. In general
anyone maintaining a binary distro would end up having to curate these themselves
so the values in OE-Core aren't really that useful anymore. In many ways it makes
sense to clear out the remaining ones (which are mostly for 'config' recipes that
are unlikely to increase in PV) and leave a clean slate for anyone implementing
a binary distro config.
References are left in meta-selftest since the tests there do involve them and
their removal upon upgrade.
(From OE-Core rev: d4c346e8ab8f3cae25d1b01c7331ed9f6d4f96ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Repo-wide replacement to use newer variable to represent systemd
system unitdir directory.
(From OE-Core rev: 5ace3ada5c54500c71becc8e0c6eddeb8bc053e3)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the result of automated script conversion:
scripts/contrib/convert-overrides.py <oe-core directory>
converting the metadata to use ":" as the override character instead of "_".
(From OE-Core rev: 42344347be29f0997cc2f7636d9603b1fe1875ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added HOMEPAGE and DESCRIPTION for recipes with missing decriptions or homepage
[YOCTO #13471]
(From OE-Core rev: bb05814335e7101bfd8df0a11dc18a044e867bed)
Signed-off-by: Dorinda Bassey <dorindabassey@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit 5159ddcb62 string length test
performed against pi_dir has effectively never been able to succeed.
Change this to rather test if pi_dir is not an existing directory. By
doing we remove the chance of seeing the following console error message
during first boot to a pristine rootfs:
'ls: /etc/ipk-postinsts: No such file or directory'
(From OE-Core rev: b1600ec8991dfbd3b73d209b9c620a171c5b13c4)
Signed-off-by: Niko Mauno <niko.mauno@iki.fi>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several recipes reference the LICENSE file in their LIC_FILES_CHKSUM
variable as ${COREBASE}/LICENSE. This forces distribution providers to
keep this file verbatim or to overload the affected recipes. The section
"Moving to the Yocto Project 1.6 Release" in the Yocto manual suggests
removing the LICENSE file where possible.
Remove LICENSE in cases where COPYING.MIT is also given and replace
LICENSE with COPYING.MIT if the former was the only entry. All modified
recipes specify LICENSE = "MIT" and none of the in-tree files specify a
different license either.
As the packages do not change (the license files are not contained in
them), do not increase PR.
(From OE-Core rev: 0059e0661826c857a07c862bcb46162671e0e330)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old implementation was wrong. It was not very generic and it checked
IMAGE_FEATURES while building the recipe, which led to various issues
with the generation of the final script. That is, the run-postinsts
script was generated once, while building the package for the first
time. Hence, any other changes to IMAGE_FEATURES, like removing/adding
'package-management' did not reflect in the final script.
This commit makes run-postinsts script autodetect the backend used for
creating the image, making it generic.
[YOCTO #5666]
[YOCTO #5972]
(From OE-Core rev: 44902f7550e490a9d4d2e2bcdf8c577329b4af75)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, opkg/dpkg have their own postinstalls that create a
run-postinsts script which is run at first boot.
This commit prepares the run-postinsts recipe/script to be used by
opkg/dpkg when DISTRO_FEATURES includes package-management.
[YOCTO #5666]
(From OE-Core rev: f33555f52a4ee83f0bd205cdf483045fcd0578b2)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly adds a systmd service file for run-postinsts,
which is started at first boot to run the post-install scripts.
Apart from this, this patch also modifies the installation location
of run-postinsts to ${sbindir}. This is because this script would be
used by both sysvinit and systemd based images. So it's more reasonable
to make it locate under ${sbindir}.
[YOCTO #5719]
(From OE-Core rev: 5933fbef26ffbc8140248ffb28957f36a813054b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently, when opkg/dpkg and run-postinsts are installed in the same
time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d.
This will make run-postinsts script useless and the delayed postinstalls
will not be run.
This issue happens only when 'package-management' is disabled and, in
the same time, dpkg/opkg ends up in the image: either pulled by some
dependency or manually installed.
With this patch, both opkg/dpkg and run-postinsts scripts will run but
the former will silently fail because the package metadata is removed from
the image since 'pacakge-management' is disabled.
[YOCTO #4484]
(From OE-Core rev: 882da38f226acc40c041155218549edad461b7d7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe is used only when the package manager is not deployed on
target and there still are delayed postinstalls that need to be run on
target. At the moment, run-postinsts is targeted to dpkg/opkg. RPM uses another
recipe, called rpm-postinsts which, in turn, is used even when the rpm
package is deployed.
This patch intends to make run-postinsts generic and deprecate
rpm-postinsts. Here's why:
* when opkg/dpkg are not deplyed, the meta-data files are useless.
Hence, the awk script is not needed. The postinstall files are already
saved in /etc/(deb|ipk)-postinsts directory and we can use the same
procedure as in rpm's case;
Also, the recipe is moved out from meta/recipes-devel/dpkg to
meta/recipes-devel/run-postinsts.
(From OE-Core rev: 0222e6740ee4670bbf42d246ab3ecad415ffcdee)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
