* hf/t/neon/b suffix is added by other ARMPKGSFX* variables, should not be
part of ARMPKGARCH, otherwise resulting TUNE_PKGARCH have that suffix twice,
e.g. cortexa8hf-neonhf-neon
(From OE-Core rev: 007a0dec82a33b01541c7f6fcad5d28c47a318ba)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is mostly for backwards compatibility and to share binary feed
like it was before, but now without missing different -mtune in it
* if you want to build some package with -mtune add something like this
to your distro config
DEFAULTTUNE_qemuarm_pn-openssl = "arm926ejs"
DEFAULTTUNE_qemuarmx_pn-openssl = "xscale"
be aware that if you do this you should do it also for all packages
which depends on openssl because if you dont and you build e.g. dhcp,
then dhcp build for arm926ejs (even with DEFAULTTUNE armv5te) will
depend on openssl with arm926ejs, so dhcp in armv5te feed will be
rebuild after each MACHINE switch.
* cortexm3, cortexr4, iwmmx and ep9312 are using own DEFAULTTUNE because
they define also different -march
* shared feeds are
armv4t: arm920t, arm9tdmi
armv5te: arm926ejs, xscale
armv7a-neon: cortexa8, cortexa9
(From OE-Core rev: a11bdc36a1be18cc5aa14682b2a2c9ee83141f51)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this tune-xscale and tune-arm926ejs were both creating
packages in armv5te feed, but each with different -mtune, with
OEBasicHash enabled it was causing each package to rebuild with new
-mtune after MACHINE switch, but that doesn't make sense with output
stored in the same armv5te feed
* this makes different feed for each -mtune, but more generic one to be
selected with DEFAULTTUNE
* tune-iwmmxt and tune-ep9312 were already using this, just move it
bellow AVAILTUNES and use ARMPKGARCH_tune-foo syntax
* tune-cortexr4 and tune-cortexm3 are using armv7r/armv7m as ARMPKGARCH
because there isn't another tune to use the same -march
(From OE-Core rev: cffda9a821a3b83a8529d643c567859e091c6846)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tune-foo is not valid override, for it to work I had to add
ARMPKGARCH = "${ARMPKGARCH_tune-${DEFAULTTUNE}}"
but that doesn't work without value defined for every supported
DEFAULTTUNE value, otherwise it's expanded like this
TUNE_PKGARCH (${ARMPKGARCH_tune-armv5te}te).
(From OE-Core rev: 31e4f2dee990ee7f5d7491b65565e71d7d580209)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* probably copy&paste error from tune-cortexm3.conf
commit 789dcb8e68a2ab9784ac10ab36815010c61af2fc
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Mon Jul 25 19:03:24 2011 +0100
Add ARM tune file overhaul based largely on work from Mark Hatle
(From OE-Core rev: 4827232077e4a059d6aa818f89c83c42bb91949a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this you'll get different sstate checksum for webkit-gtk and
cairo even when you build them with DEFAULTTUNE == armv5te
* maybe this isn't needed at all anymore or if it is then it should be
applied in arm-armv5.inc for all armv5te devices, not only xscale?
(From OE-Core rev: c51643a510da6d1c3426b3de8f18ae864cb073a4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch contains several aditional changes:
* removed one backported patch (included in the new release);
* changed mips64-compiler.patch to apply properly;
* licence checksum for COPYING file changed: some copyright years have
been changed;
* bump PR in xorg-driver-common.inc so that all input/video drivers
get rebuilt. That's becaue the ABI changed;
The following external modules are now built-in:
* DBE
* DRI2
* DRI
* RECORD
The extmod module was completely removed.
(From OE-Core rev: 506da0d139dd470475a1d6b2dd3ae62406c36816)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The n32 architecture is odd, in that it's a mips64 ABI which happens
to be 32-bit. To handle this, we need something in the environment
which can be used to distinguish it. The obvious place to stash this
is the ABI suffix, so we use "n32" as an ABI suffix. This allows
a couple of improved checks:
1. In insane.bbclass, we can use "linux-gnun32" to discern that it's
okay for a mips64 binary to be a 32-bit binary in some cases.
2. In multilib_header, we can check for the n32 ABI, and use a distinct
value.
3. In siteinfo, add linux-gnun32 as a synonym for linux, similar to
what's done for linux-gnux32, and tell the mips*-linux-gnun32 variants
to pick up the corresponding mips-linux site configs.
Note that the multilib header wrapper already has n32 hooks in it, there
was just nothing creating -n32 header variants.
(From OE-Core rev: c8e8e8ba22eaa335ac72f0e5b317f804035133e2)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mesa-dri is an empty package, so depending on it doesn't achieve anything.
(From OE-Core rev: a41f8341971a958cf55c07f3c91e1742570053cd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also supports a new altivec TUNE_FEATURE
(From OE-Core rev: 4586c24ad156773568cd38794936b8af62e862be)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It has been pointed out several times that the yocto mpc8315e-rdb
reference was using the wrong tuning (603e), since it is actually
a e300c3 board.
This commit creates a e300c3 tune file based on the e300c2 variant
already in oe-core.
This commit also inhibits altivec in flac when this new tuning is
enabled and used by the mpc8315e-rdb
[YOCTO #1192]
(From OE-Core rev: 8663c7ba0530eb36728fe524ed0137e064cc1c5a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the ia32-base.inc moved over from meta-intel. See meta-intel
for the complete history of contributions to this file.
Here's the initial commit text that explains the purpose of this file:
The meta-intel BSPs currently have a number of machine settings common
to all - factor these out into a common include file.
Also add several new intel-specific XSERVER variables for building
XSERVER variables in BSPs.
(From OE-Core rev: 9a8b4fcac639404caa8ac87717118b3380239838)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple of boards use chips which perform noticably better
when optimized for the 476. Add a trivial tune file to let
them run better.
(From OE-Core rev: 9ac6da9d0e0b9f7678752ff7b9c91e39c140b4e7)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The xserver-xorg uses and depends on mesa-dri, so we should
use the default PREFERRED_PROVIDER of libgl as mesa-dri.
This resolves the following:
ERROR: Multiple .bb files are due to be built which each provide virtual/libgl (/intel/poky/distro/meta/recipes-graphics/mesa/mesa-dri_7.11.bb /intel/poky/distro/meta/recipes-graphics/mesa/mesa-xlib_7.11.bb).
This usually means one provides something the other doesn't and should.
(From OE-Core rev: cf8b4b95c6d84c097f4fc63662f181a59e0f9cb9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For qemux86 and qemux86-64 include qemu.inc after defining XSERVER
XSERVER variable is also weakly defined in task-core-x11.bb
which means we can not use ??= otherwise when building any qemu image
that uses task-core-x11.bb will get the wrong definition
So we define the XSERVER common set for qemu in qemu.inc
and as we know x86 and x86-64 qemu overrides the default
we include qemu.inc after that definition which means that
qemux86 and qemux86-64 get their own definitions and other
qemus get the definitions from qemu.inc. other non-qemu machine
will get their defintion from task which points to kdrive
as of now.
(From OE-Core rev: 62dba36166bc5faa32ba3e0664ae98b168cde6b1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This cleans up and/or corrects a few values from machine includes
for consistency with future toolchain sanity checks, and also adds
the TUNEVALID and TUNECONFLICTS to documentation.conf.
(From OE-Core rev: 6ffe53c721a80cf156b44f59b564f2e899c6af50)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In tune-sh3, tune-xscale, and tune-sh4, several FEATURES lines referred
to nonexistent features like "sh3eb" when they should have referred to "sh3
bigendian" or the like. Caught by the TUNEVALID sanity check.
(From OE-Core rev: e63fb1e9918bff6f91bbab09b29248ab8b649e84)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the experimental SH tunings to match the tunings README.
These tunings have not been tested, and are experimental!
(From OE-Core rev: 603a15bf4c838e4b6352e31f70a958d93f91138f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the ARM tunings to match the new tunings README file.
The ARM tunings define TUNE_PKGARCH in a way that only one main
arm architecture, i.e. armv6, may be defined at the same time. We
may have to revise these settings in the future, as well as figure
out a way to better differentiate various optimize tunings in the
package arch. (This was not done, to preserve existing behavior!)
Fix a number of minor issues w/ the armv5 tunings where DSP variants
were referenced but not defined.
Fix incorrect armv7 entries in armv7a.
Fix PACKAGE_EXTRA_ARCHS definitions inside of tune-cortexm3 and tune-cortexr4.
(From OE-Core rev: 0e71abea5458122188d5eddef2c17147f61ff895)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the PowerPC tunings to match the new tuning README file.
Default PowerPC to using TUNE_PKGARCH = ${TUNE_PKGARCH_tune-<tune>}
Fix AVAILTUNE settings in ppc603e, and ppce500mc to be addative.
Correct potentially overlapping "spe" definitions in ppce500 and ppce500v2.
(From OE-Core rev: f81f71bcff4bb1032b034b068efe6065113ca9e7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the MIPS tunings to match the new tuning README file. Also
add a MIPS specific README file to explain the MIPS specifical
architectural issues.
Finally correct the variant configurations within the tune-mips32.inc.
(From OE-Core rev: efbfa2ace3362393a20340af93e8dcab17a8619a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We perform a basic cleanup of the IA32 architecture and related
tunings in order to match the rules and descriptions within the
new tuning README file.
A number of small issues were corrected in the "c3" tuning to
bring it inline with the README.
(From OE-Core rev: ab77d3401908964f3249c761969600b5ec1bfbd0)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new README that covers the basic items used with various cpu
tunings. The goal is to better help people understand the various
settings and where things should or should not be defined.
Corresponding architecture README files will also be generated to
explain the particulars of architectural tunings.
Also remove the default TUNE_PKGARCH setting in bitbake.conf. This
was done to ensure an error occurs if an invalid tuning is defined.
(From OE-Core rev: e138f9f7e48e0af94c5c88045c4f0581cc68248d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All PACKAGE_EXTRA_ARCHS for cortexa8, cortexa8t and cortexa8-neon have typo in
referencing tune-armv7at even for non-Thumb modes. Probably a copy/paste error.
That's not the case for recently-added hard-fp tunes.
Same for cortexa9.
(From OE-Core rev: 4e91c00bb3a171bebdb716451b901f5f099a04bc)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Still need mesa-xlib for emulation of GLX interface on qemuarm/mips/ppc, where
mesa-dri doesn't work for pure qemu emulator.
[YOCTO #2066] fixed.
(From OE-Core rev: 22775b5f1d9c6d9860a579245bf7a48a982ab62f)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use of FPRs instead of GPRs is incompatible with e500/SPE, so let's be
explicit about the use of GPRs to avoid potential errors. For example, with
the Sourcery G++ toolchain, one can hit: conftest.c:1:0: error: E500 and FPRs
not supported.
(From OE-Core rev: 32bb6afe3e6f3e374e4d14edc238b46a90d44169)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
armv7 is least common denominator of armv7-a
armv7-m and armv7-r and armv7-m does not support
ARM instructions but only thumb2 instruction set
which means armv7 when chosen will complain if
code is compiled in arm mode which is default
in OE if not specified other wise
if we chose this tuning errors like below pop up
error: target CPU does not support ARM mode
This tuning seems theoretical and base tune
for armv7 would be one of armv7-a, armv7-m or
armv7-r
(From OE-Core rev: 75b8adbc042e0f65fb1286bc550d02becd3b6aea)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can use the default value for TUNE_PKGARCH, and now we just
append "-nf" if TARGET_FPU is fpu-soft
(From OE-Core rev: c2d96179c00e6600698d3fbc5cf5c95313ab7535)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "1" with getVar is bad coding style and "True" is preferred.
This patch is a sed over the meta directory of the form:
sed \
-e 's:\(\.getVar([^,()]*, \)1 *):\1True):g' \
-e 's:\(\.getVarFlag([^,()]*, [^,()]*, \)1 *):\1True):g' \
-i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a soc-family.inc file that can be included in a machine.conf to enable
the use of SOC_FAMILY in MACHINEOVERRIDE, which could be useful to group
multiple machines with the same common base. Some examples can be seen in
meta-ti BSP layer.
(From OE-Core rev: 641cdbc7ee0186053dd541e0dd5fb7b03b1c10d1)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need two files for this. Also this fixes some mutlilib build
issues where we were not able to select the multilib arch to be
ppce5500 or ppc64e5500.
Changes recently made to meta-fsl-ppc layer depend on this change as
well
(From OE-Core rev: 4fbb72a359fea2e0922f472f48f186bbd1ca2b36)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tune-mips32.inc only lists mips32 CPUs with hardware FPU.
Extend it to list CPUs without hardware FPU, too.
(From OE-Core rev: 26630a9f37b04e215eff9b8e63414b6b2066d6fa)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no reason to continue to carry this feature
(From OE-Core rev: f1193e077d187b9ce18ae0686b1a1f0f9832036d)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recent versions of the GCC reject the -mno-thumb option. In order to prevent
the compiler from generating code for the Thumb instruction set the -marm
switch should be used instead. For details see GNU bug #47930.
(From OE-Core rev: 72dc73f5a647ccd38145fd888c109a144f202963)
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set PACKAGE_EXTRA_ARCHS for the generic tunes ("powerpc" and
"powerpc-nf") thus allowing to use them instead of tuning to the
specific CPU.
(From OE-Core rev: 5eafbe2d8684ee1c45477bfd69b579af47adccd9)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpmbuild can not handle the PACKAGE_ARCH of these kinds:
x86_64-x32, core2-64, core2-64-x32
With these kinds of PACKAGE_ARCH the --target parameter of rpmbuild
becomes like: core2-64-x32-poky-linux-gnux32 ; And rpmbuild extracts
%_target (arch) wrongly as core2 generating these kinds of rpms with
incorrect filenames: zip-3.0-r0.core2.rpm
So this commit fixes the issue by making PACKAGE_ARCH like this:
x86_64_x32, core2_64, core2_64_x32
Now --target parameter of rpmbuild becomes like:
core2_64_x32-poky-linux-gnux32 ; And rpmbuild extracts %_target (arch)
correctly as core2_64_x32 generating these kinds of rpms with correct
filenames: zip-3.0-r0.core2_64_x32.rpm
(From OE-Core rev: 1a599cc822ad517f9ba70ceb0e39c5572d37a5a6)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Machines shouldn't be poking around PREFERRED_PROVIDERS which aren't
machine specific or at least machine safe. Kernels are machine specific
and the xserver is selectable. libx11 and mesa are now really a distro choice
and machine configurations shouldn't be poking around them as it just leads
to corruption, conflicts and confusion.
(From OE-Core rev: 97a57aca12437c24b628071bb189c9f3b94e27ca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
