Create a runqemu function which uses the QemuTarget() code from
oeqa.targetcontrol to setup the QEMU instance, with all of the added
robustness that that gives us. To do this, a datastore is needed for the
recipe in question (core-image-minimal) so we do the work needed to set
this up. We then use this runqemu function within the imagefeatures
tests instead of a hand-rolled implementation.
We can then use SSHControl to run the SSH tests rather than rolling our
own code to do that as an added bonus.
Fixed and extended by Paul Eggleton <paul.eggleton@linux.intel.com>.
Part of the fix for [YOCTO #7994].
(From OE-Core rev: 7d18d1169204ee80f1c00b35998f10fffaefa107)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Don't wait for QEMU to start if it's never going to (because runqemu
exited with an error)
* Don't error out if killing the process fails with "no such process"
(we don't care if it's already dead)
(From OE-Core rev: 1789b89de6c4642464abadd9f8a4746385e6b4a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu-internal runs stty to return the terminal to its previous state
in case QEMU hasn't done that properly (which it at least used to do
when it crashed). For some reason I have yet to determine, stty blocks
(on tcsetattr() according to gdb) when run within QemuRunner() under
oe-selftest, with the result that we always wait until the timeout and
then we kill the script, which adds an extra delay after QEMU is
stopped. Naturally you would assume that this is something to do with
the nature of the terminal under which it is being run; however no
amount of playing around with stdin/stdout/stderr seemed to fix the
issue, apart from passing in subprocess.PIPE as stdin which makes stty
error out with "stty: standard input: Inappropriate ioctl for device". I
was also unable to come up with a reliable test for the terminal which
we could use inside runqemu-internal to avoid calling stty. For now, go
with the stdin=subprocess.PIPE workaround to at least avoid the delay
with minimal ill effect.
(From OE-Core rev: a058d07cd7251749fa9c1c8eca3caa80144664fe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 519e381278d40bdac79add340e4c0460a9f97e17 unfortunately
broke logging in two different ways:
1) it prevented logging to the task log from working within bitbake
-c testimage. This is due to the logger object being set up too early
which interferes with BitBake's own logging. If we prefix the name
with "BitBake." everything works (and we don't need to set the
logging level).
2) Additionally because it called the log functions on the logging
module and not the logger object it set up, this caused the
oe-selftest logging to start printing everything from that point
forward.
Fix these two issues and return us to the desired behaviour for
do_testimage.
(From OE-Core rev: 429b1971be06d5146bb1c14f4697966cddab3b33)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible to customise the hostname trivially so don't assume that the
hostname hasn't been configured.
(From OE-Core rev: faf85728ed9a5a3af336f243f6f3567c773159cf)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If DISPLAY is set, ssh-askpass can be triggered which is not what
we want in the middle of sanity tests. We can disable this by
unsetting DISPLAY.
(From OE-Core rev: 085681a1418a29a8331cdde0f477f4e223de84be)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using bb.note() etc for logging use logging.Logger directly, allowing
the use of QemuRunner outside of bitbake.
Also clean up the logging/errors by moving create_socket() out of
__init__()/restart() and into start().
(From OE-Core rev: 519e381278d40bdac79add340e4c0460a9f97e17)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only split on the first equals character so that values that contain
equals characters (such as FAKEROOTENV) can be retrieved.
(From OE-Core rev: ff720dd3b77130b2c485d7acad63735fd8751a7d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Locating which recipe provides a file in an image that you want to
modify and then figuring out how to bbappend the recipe in order to
replace it can be a tedious process. Thus, add a new appendfile
subcommand to recipetool, providing the ability to create a bbappend
file to add/replace any file in the target system. Without the -r
option, it will search for the recipe packaging the specified file
(using pkgdata from previously built recipes). The bbappend will be
created at the appropriate path within the specified layer directory
(which may or may not be in your bblayers.conf) or if one already exists
it will be updated appropriately.
Fairly extensive oe-selftest tests are also provided.
Implements [YOCTO #6447].
(From OE-Core rev: dd2aa93b3c13d2c6464ef0fda59620c7dba450bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake can parse ~ in bblayer's paths.
Added this functionality to oeqa code.
(From OE-Core rev: b4dc5b271247a1894d66908c5f20973be2a60d43)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This isn't a test of wget so if the files we need are present in DL_DIR,
use them from there and save a bit of speed/bandwidth and skip the wget.
(From OE-Core rev: dc1d83d021afd77ca8fb948dc47bbd11e3844865)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use threading to get the current threads ident to select the current
executing frame to ensure that the scanned stack is the expected stack.
This allows for the decorators to be used within a process that has
multiple threads executing.
(From OE-Core rev: a44d27b92baba4ab51f432ec01cdc473436ce406)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TEST_SUITES="auto" is useful to run all suitable tests without
having to hard-code the list. However, it did not take test
dependencies into account, which can be an issue for tests
which really depend on some other test to run first.
To fix this, modules get loaded in the order determined by
TESTS_SUITES, but then get re-ordered based on dependencies
derived from @skipUnlessPassed before running them. The original
order is used to break ties when there are no dependencies, so
reordering only occurs when really necessary.
@skipUnlessPassed gets extended such that it makes the test name
a method depends on available for inspection by the test loader
in oetest.py.
Unfortunately Python's unittest offers no API to inspect tests
in a TestSuite, so the code has to rely on implementation details
to find all tests. The worst that can happen when the implementation
changes is that tests are not found and reordering does not happen.
(From OE-Core rev: 6e4543a35836c572b23b9f8162b19d1e038d3ed2)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow get_bb_var() to work with unexported variable values such as
MACHINE - the workaround is a little crude but should suffice for now.
(From OE-Core rev: 48b58466bba084fd3439706d47e0cfbb7e951ee4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if one module is skipped, any other module calling skipModule
causes tracebacks about _ErrorHandler not having a _testMethodName
method.
This reworks the code in a way to avoid some of the problems by using
the id() method of the objects. It also maps to the correct name
format rather than "setupModule" or just skiping the item entirely.
(From OE-Core rev: 78d3bf2e4c88779df32b9dfbe8362dc24e9ad080)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, running tests individually failed with a traceback:
$ oe-selftest --run-test
buildoptions.ImageOptionsTests.test_incremental_image_generation
2014-12-23 14:40:37,636 - selftest - INFO - Checking that everything is in order before running the tests
2014-12-23 14:40:38,408 - selftest - INFO - Running bitbake -p
2014-12-23 14:40:40,235 - selftest - INFO - Loading tests from:
oeqa.selftest.buildoptions.ImageOptionsTests.test_incremental_image_generation
Traceback (most recent call last):
File "/home/user/poky/scripts/oe-selftest", line 179, in <module>
ret = main()
File "/home/user/poky/scripts/oe-selftest", line 164, in main
suite.addTests(loader.loadTestsFromName(test))
File "/usr/lib64/python2.7/unittest/loader.py", line 91, in loadTestsFromName
module = __import__('.'.join(parts_copy))
File "/home/user/poky/meta/lib/oeqa/selftest/buildoptions.py", line 12, in <module>
class ImageOptionsTests(oeSelfTest):
File "/home/user/poky/meta/lib/oeqa/selftest/buildoptions.py", line 14, in ImageOptionsTests
@testcase(761)
NameError: global name 'func' is not defined
(From OE-Core rev: 8e3fbb0bb2c0eabfb39752c25e7c3f5d77881f64)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Enable querying exported variables
* Use strip() to remove quotes so any internal quotes are not disturbed
(From OE-Core rev: 418cdf1ca37e06165ebaec86a0098d4750208539)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A module for parsing results based logs like ptest, compliance and performance.
Supports breaking the logs into multiple sections and also provides a result object to use the parser with.
The parser is initialized with the regex required to identify results and section statements in the target log file.
(From OE-Core rev: 72308d030fc98982e88b121b052cd2438f6b031c)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With bitbake-worker installing a SIGTERM handler, we now need to reset the one here
to ensure that when this process shuts down, it doesn't take the rest of the task
with it. This does appear to be the only place in OE that we have this problem.
(From OE-Core rev: e1ac67d6470dde70239ca0430b18ca0bffbc0295)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Create new abstract class BuildProject that provides basic functionality for a project/package building class
* contains abstract method _run() that needs to be implemented by all extending classes.
- The old TargetBuildProject class now extends the abstract BuildProjct class
- Introducing new SDKBuildProject that extends the abstract BuildProjct class
NOTE: Original patch made by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: bc8824fd361dbff96f5b5316ddfda36e96e8ea9b)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An 'import os' was omitted here while testing the previous decorators using runtime tests that import the os module before this one. Unfortunately oe-selftest fails because of this missing import.
(From OE-Core rev: 5381e6cf6bf7143074800b2949bfa5331fdb6d47)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make the test skipping decorators independent of the oeTest object we rely on the unittest result object to construct skip, fail and error lists used by these decorators.
Created a new object getResults that analyses upper frames and retrieves the unittest result object instance, then return a list of failed, skipped and error tests.
Also removed the oetest import from decorators.py because it was no longer required.
(From OE-Core rev: 4d2d201158236bd4c72546cf8db88681ff921b11)
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding support for postconfig option to the bitbake() and related methods.
This enables us to use 'bitbake -R postconfig_file <command>'.
Usage: bitbake(cmd, postconfig="some confguration")
'postconfig_file' would contain what we add in 'postconfig'
Other methods affected: get_bb_env(), get_bb_var()
(From OE-Core rev: 4fe771940a8f59a0d5f1541978d6d9ff73b222f4)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For use outside of tests themselves, we want a better error than
AssertionError, so create one and allow us to request it when calling
runCmd(). This enables us to avoid tracebacks during master image
operations if the power control command fails.
(From OE-Core rev: 89868383685091b0d3723fb8f29590f3f6610078)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log the output of the command as it runs not when it finished, else
tail -f tmp/work/minnow-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log
isn't as useful as it could be.
(From OE-Core rev: be8f766f43d85c364b9706b464ed0a59d0fbf0b7)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If some service is to spammy we might miss the login, so search
in the entire log instead of just the last few lines.
Use qemu in regex too (to avoid a login string from some service).
(From OE-Core rev: 1117d25fdfabbf1afdc7030e05efc6a32df871e3)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A previous commit broke downloads
when proxies are involved, let's fix it.
(From OE-Core rev: 97e263b99cbe8184a74f80738fd471cfdef29e0c)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running tests outside of the build system we can't use
bb.fetch anymore. It was nice but tests and their modules
need to rely on the data storage only as that gets exported.
This module is used by the oeqa/runtime/build* tests.
(From OE-Core rev: 3caf8e244ea94f62a93f3b40e73e15ea78fc2880)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split the class in two, one to handle the process and the
timeout based on output and one for the actual ssh/scp commands.
The ssh/scp methods now use the same run method.
It does the same thing as before but:
- it looks cleaner.
- adds support for using a different user than root
- optionally, raises an exception when exit code != 0
(that's useful for code outside of tests, where you wouldn't want
to check the return code every time as the tests do)
(From OE-Core rev: bb14a7598d3c0636dc249f719bde0d9d65b2694d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an optional parameter to SSHControl so the user can specify
and alternate port to the default (22).
(From OE-Core rev: 091d395e43836575587112ee1696a18c401505bb)
Signed-off-by: Sipke Vriend <sipke.vriend@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allows a layer to define new classes in <layer>/lib/oeqa/utils/controllers.py
and completely control or extend deployment of a target. (core currently
has QemuTarget and SimpleRemoteTarget).
The value of TEST_TARGET must be the name of the new class.
(From OE-Core rev: 9b81aff0aca42353d448b1e9522f89842e23c7b2)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch makes the necessary changes for using the targetcontrol.py module
so that one can run the same tests on a qemu instance or a remote machine
based on the value of TEST_TARGET variable: "qemu" or "simpleremote".
The default value is "qemu" which starts a qemu instance and it's the
with what we currently have.
With "simpleremote", the remote machine must be up with network and ssh
and you need to set TEST_TARGET_IP with the IP address of the remote machine
(it can still be a qemu instance that was manually started).
Basically testimage.bbclass now does something along the lines of:
- load tests -> deploy (prepare) / start target -> run tests.
There were a couple of changes necessary for tests and
also some cleanups/renames that were needed to adjust this change. (use
ip everywhere when refering to target and server_ip when refering to host/build machine)
Also two unnecessary and unsed methods were dropped from sshcontrol.
[ YOCTO #5554 ]
(From OE-Core rev: a7820350fa3271d78ed7476e02f4aef593be1125)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of oe-selftest is to run unittest modules added from meta/lib/oeqa/selftest,
which are tests against bitbake tools.
Right now the script it's useful for simple tests like:
- "bitbake --someoption, change some metadata, bitbake X, check something" type scenarios (PR service, error output, etc)
- or "bitbake-layers <...>" type scripts and yocto-bsp tools.
This commit also adds some helper modules that the tests will use and a base class.
Also, most of the tests will have a dependency on a meta-selftest layer
which contains specially modified recipes/bbappends/include files for the purpose of the tests.
The tests themselves will usually write to ".inc" files from the layer or in conf/selftest.inc
(which is added as an include in local.conf at the start and removed at the end)
It's a simple matter or sourcing the enviroment, adding the meta-selftest layer to bblayers.conf
and running: oe-selftest to get some results. It would finish faster if at least a core-image-minimal
was built before.
[ YOCTO #4740 ]
(From OE-Core rev: 41a4f8fb005328d3a631a9036ceb6dcf75754410)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of running the commands with a fixed timeout,
we should kill the command if there is no output
for timeout seconds.
Also changed some strings/comments.
(From OE-Core rev: beea86fa9637fd629719980e14beea758847b8f3)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add oeTest superclass, make oeRuntimeTest inherit that and
make the necesarry adjustments. Tests in lib/oeqa/runtime don't
change, they still inherit oeRuntimeTest.
We should do this because oetest.py in the future can be a base module
for more stuff than oeRuntimeTest.
(From OE-Core rev: cd4ed41a070bd52c446ac3df8337f17ab9421145)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It might be useful for debugging to have in the ssh log
the number of seconds a command has run.
(From OE-Core rev: 48b9e45b9716130b015ae2ab7398d6aa243933dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new QEMU_DONT_GRAB environment variable to disable grabs,
finally/hopefully solving the random hangs that the autobuilder has been hitting
for a while.
[ YOCTO #5131 ]
(From OE-Core rev: 32f9575a565f350649264c11eceba8311584b0fd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: 7e90261aec61f79680b5eaeaf5b18c7b795412a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A 0 value to select.select() immediately returns with no timeout. This was
pegging the cpu at 100% for the python process which was bad and may be
contributing to some of the timeout problems.
Profile from -P of a core-image-minimal before:
97526792 function calls (97525652 primitive calls) in 45.189 seconds
and after:
50204 function calls (49064 primitive calls) in 17.318 seconds
Saving 97.5 million function calls has to be good :)
(From OE-Core rev: c0551436974d179df23418567f18a082830380f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ssh_options to be used, the same, by ssh and scp:
Decrease LogLevel to ERROR, to suppress warnings (e.g. ssh host
verifications, two warnings in case of having openssh with hpn patches);
We no longer presume that the first line is a warning.
(From OE-Core rev: 1f18d04eec03e586134b6d77ca1c6151c22353dd)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only.
Also use the timeout option (default is 300s for ssh commands) for all the commands
run in this module (mostly because smart update timeouts on mips).
(From OE-Core rev: 8c272641ef3e8410f331ca4133d28dea8f36e4f4)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When qemu doesn't start or runqemu errors out
(some wrong option passed or sudo needs a password for setting tap) we
want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/
poky commit 51588936d4
changed the kill method and broke this code, so let's fix it.
(From OE-Core rev: 923d4bd548911caa0b419c10905895af1e8e7026)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
