It replaces the use of busybox as hardcoded dependency to more dynamic
this wouldn't affect the way that the initrams is build, just it let a more
flexible replacement in the core.
(From OE-Core rev: f0f7062e9aa5e7708fc92cac2afb1aa85eb3d4ef)
Signed-off-by: Alejandro Joya <alejandro.joya.cruz@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following error occurs when udevd startup:
udevd[146]: bind failed: No such file or directory
error binding udev control socket
udevd[146]: error binding udev control socket
(From OE-Core rev: 4db089f10a379bc9a4df287bd657153eb4b94c45)
Signed-off-by: Wills Wang <wills.wang@live.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running the install option from bootloader to install image to eMMC will fail
with error:
Formatting /dev/mmcblk01 to vfat...
mkfs.fat 3.0.28 (2015-05-16)
/dev/mmcblk01: No such file or directory
This issue impacts both grub and gummiboot install option to eMMC device.
The installation failure is due to the following:
[1] Unable to partition eMMC as the partition prefix 'p' is not appended
The condition checking failed with the additional /dev/ appended with
the target device name.
[2] The partition uuid for boot, root and swap partition is not captured
for eMMC
This fix updated the condition checking and changed the variables to
reference the boot, root and swap partitions for UUID.
[YOCTO #8710]
(From OE-Core rev: a7d081c3db776c8b0734942df6bf96f811f15bd3)
Signed-off-by: Ng, Mei Yeen <mei.yeen.ng@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running gummiboot loader install option, the installed target
storage device boot parameter for root=PARTUUID is empty causing boot failure.
This issue is only observed with gummiboot and not with GRUB loader.
This fix assign the rootuuid of the rootfs partition for gummiboot loader.
[YOCTO #8709]
(From OE-Core rev: fd5fa06fe45ca1fdf20df4198ae323967244af5b)
Signed-off-by: Ng, Mei Yeen <mei.yeen.ng@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the "boot" parameter refers to a non-existent device, the only
visible output at normal log levels was a rather confusing:
ERROR: There's no '/dev' on rootfs.
That's because the actual error, not being able to find the root
device, was only a debug message, which gets ignored in the default
mode.
Promoting the "root '$bootparam_root' doesn't exist." message from
"debug" to "msg" gives sufficient context to understand the error. A
more intrusive change would be to change also the control flow.
(From OE-Core rev: 71d7803e5b13e26fd8001e87cfbac68114ddaa30)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a missing $ before the variable name, all fatal errors ended up
invoking a shell, instead of only doing that when init_fatal_sh is set
as boot parameter.
(From OE-Core rev: 2a4335eae4b31ea9451a665dad2ba33ae4967670)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base-files recipe installs /mnt/mtab (it is a softlink of /proc/mounts),
so if an image includes the latter, there is no new to created it again inside
the install-efi.sh script, otherwise an error may occur as indicated on the
bug's site.
[YOCTO #7971]
(From OE-Core rev: 6c6c6528954952e1e323f5a26afd93b99913e6f2)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the init_fatal_sh boot parameter is present (i.e. used without
value) and a fatal problem occurs inside the initramfs-module, a shell
will be started instead of looping forever.
Useful for debugging.
Interestingly enough, the code was already indented to support such an
if check...
(From OE-Core rev: 1d3dc681e809846dba7cae4f81566045a3f8c205)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can be useful for debugging to override the default /sbin/init.
This is something typically done via the init boot parameter which
then gets interpreted by the kernel. But when using an initramfs, it
is the initramfs which must react to the option.
(From OE-Core rev: dfd6d4c765924f472ac2df724342547b5c15249a)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default is to mount the rootfs read/write. "ro" can be used to turn
that into read-only, which is useful on systems where userspace does
an fsck before remounting read-write.
Giving both "ro" and "rw" will still mount read-only regardless of the
order, because the ordering information is not preserved by the
initramfs-framework's boot param support.
(From OE-Core rev: a09f10f9360862c16fb68972ac041d474d6e3a64)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These two parameters are supported by the kernel
(https://www.kernel.org/doc/Documentation/kernel-parameters.txt). When
an initramfs is used, the kernel does not mount the rootfs and the
initramfs needs to react to them.
The boot parameters can be set both by the image creator and
by users.
Supporting these two parameters is useful:
- rootflags is needed to ensure that the rootfs is already mounted as
intended in the time between starting init and init remounting
it (as systemd does); this is critical for IMA where iversion must be
active already when system starts writing files.
- setting it correctly up-front avoids messages from the kernel ("cannot
mount ... as ext2 because ...") when trying to guess the desired type.
For example, assuming that only one of ext4/ext3/ext2 is set,
rootfstype could be set in an image recipe with:
APPEND_append = "${@''.join([' rootfstype=' + i for i in ['ext4', 'ext3', 'ext2'] if i in d.getVar('IMAGE_FSTYPES', True).split()])}"
(From OE-Core rev: b8ea1c61b4b8071edf70f5d42119c54ea84de330)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel parameters like "uvesafb.mode_option=640x480-32" were turned
into shell variables named "bootparam_uvesafb.mode_option", which
triggered errors from the shell because the name is not valid. Now
points get replaced with underscores, leading to
bootparam_uvesafb_mode_option in this example.
(From OE-Core rev: de81e804f0654092d20ccb8e6e40f4ff614c4b09)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some kernels, for example linux-yocto 3.19 for qemux86, fail to
execute /init in an initramfs unless there is already a /dev/console
char device in the initramfs. Booting then fails with:
Kernel panic - not syncing: /dev/console is missing or not a character device!
Please ensure your rootfs is properly configured
The panic itself comes from a linux-yocto specific patch to
kernel_init_freeable in init/main.c, but even without it, that
function will print an error when /dev/console is missing. The
kernel's Documentation/initrd.txt also mentions creating that device.
It remained unclear why this is not a problem on other machines. On
intel-corei7-64 from meta-intel, something (the kernel?) creates
/dev/console and /dev/[012] before transfering control to the init
script. In that case, creating /dev/console in advance is not
necessary, but does not cause any problem either.
(From OE-Core rev: 1b64664f0c388f41084f5db6e46e3e68c53fb6d9)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some kernels, for example linux-yocto 3.19 for qemux86, fail to
execute /init in an initramfs unless there is already a /dev/console
char device in the initramfs. Booting then fails with:
Kernel panic - not syncing: /dev/console is missing or not a character device!
Please ensure your rootfs is properly configured
The panic itself comes from a linux-yocto specific patch to
kernel_init_freeable in init/main.c, but even without it, that
function will print an error when /dev/console is missing. The
kernel's Documentation/initrd.txt also mentions creating that device.
It remained unclear why this is not a problem on other machines. On
intel-corei7-64 from meta-intel, something (the kernel?) creates
/dev/console and /dev/[012] before transfering control to the init
script. In that case, creating /dev/console in advance is not
necessary, but does not cause any problem either.
(From OE-Core rev: 0352841cd92f6316bcac092e2fff9d28c352b36b)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case there is no installation device present, give a better
message to the user and abort installation.
[YOCTO #7971]
(From OE-Core rev: f1596b7169146afcb38db683eb6170a480422d73)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Platforms which have the capability of using the MMC as an
installer medium will present the same MMC device as an
installation candidate. This happens because the MMC
devices appear as mmcblk<X> and the current script strips
up the <X> which is needed to identify an MMC device
uniqely.
This patch now updates the way device identifier stripping
is done and handles the exclusion of installer device from
installation candidates more generically.
(From OE-Core rev: 80ec9f62791575de4948d7635dc6674abfac2193)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed deletion of the partition table by increasing
amount of sectors from 2(correct for msdos PT) to 35 as
GPT size is 34 sectors + 1 sector for protective MBR.
(From OE-Core rev: 9be59c02901a6c9ecaaa293aea2e938edf9b122c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
parted allows to use names for partitions if GPT partition table
is used on the device. msdos partitioning can have only partition
types: 'primary', 'logical' or 'extended'.
Used meaningful partition names in parted command line for GPT
partitioning.
(From OE-Core rev: ef2c6df7fcfd02ed45637f2e6b48f324d7a56b88)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly specified filesystem type for parted mkpart command.
This makes partition table to look more informative.
(From OE-Core rev: 945a5172c2b996f0f307813d061250c39f77ebd2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used partition UUID in kernel command line to specify root partition.
Searched root device by file system uuid in GRUB configuration.
Used partition UUID in /etc/fstab to specify swap partition.
Used filesystem UUID in /etc/fstab to specify boot partition.
[YOCTO #6101]
(From OE-Core rev: 4c223e0bd8770909dca1131580878eba6855e085)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed partition type from 'msdos' to 'gpt'.
Added special partition for grub stage2 bootloader.
NOTE: This is done only for GRUB 2 as legacy GRUB is
rarely used and doesn't support GPT partitions.
(From OE-Core rev: 9544ac920d65edb7ddb267482c84d6fc1b464912)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using UUID in favor of device names is more reliable as
UUID names are persistent.
Device names can change as the order of adding device nodes
is arbitrary. This sometimes results in device names switching
on each boot, which can cause system fail to boot.
Persistent naming solves these issues.
Used partition UUID in kernel command line to specify root partition.
Used partition UUID in /etc/fstab to specify swap partition.
Used filesystem UUID in /etc/fstab to specify boot partition.
[YOCTO #6101]
(From OE-Core rev: f51b050e0df6ceaea07fbda99f54dc4aeaab334c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added util-linux-blkid to the list of dependencies of
initramfs-live-install and initramfs-live-install-efi.
This is a part of the work to support partiion UUID in installer.
blkid is going to be used to get partition and filesystem UUIDs.
(From OE-Core rev: 3c26a5ad5937556dfd3262fa50e63350c5c71623)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init script that invokes install and install-efi scripts
passes the first parameter that identifies the boot drive but
in cases when this disk is labeled and kernel configurations
allow disk labeling under /run/media/ this would pass the disk
label.
The earlier implementation considered that the drive name will
be passed and in case the label is passed it fails and provides
the boot drive as an option for installation driver.
We now use a more generic approach to identify the boot drive
which can handle both drive name as well as label if passed.
(From OE-Core rev: 1964b697ddadc59e27087f9f1f6b24236f4addcc)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After selecting the "install" gummiboot option of a Live image we are
seeing boot failure resulting from the gummiboot entries not being
installed correctly. This seems to be a problem in this init-install-efi.sh
script where it incorrectly installs the gummiboot entries into the root
filesystem, not the boot partition. We fix it by installing the entries in
the boot partition.
(From OE-Core rev: c9b06c79ed8a082d1b385e9f61721aeeda9bf1af)
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed in case the boot disk was created with mkdiskimage.
In that case the parameter passed is a variant of /dev/sda4 which
includes the partition number. Without this change this install script
will offer to install onto the live media.
(From OE-Core rev: 9f6d7d42eaad225698de730d5c76bfe9523f4a78)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some mmc cards do not have all the data files in /sys/block
populated. Check for existence before displaying the files
to avoid erroring out of the install process.
(From OE-Core rev: 4abe5563f61a228963e1e442ebc2df9f2d01be80)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are cases where software after boot may need to know the
current boot disk. Under the current system, it is not guaranteed
which disk is the boot. While /media/sda is a good guess, it
isn't always right, nor is it a good assumption that only one boot
disk is in the system. This gives a standard path to the original
boot disk mount which can be used to, for instance, update the
syslinux file on the boot media with a newer kernel, or updating
the boot parameters to add user options for future boots. Knowing
which disk is the boot media keeps from updating the non-boot
disk when for instance multiple syslinux boot medias are plugged in
(ie ensure correct syslinux is updated when the booted system is
updated).
(From OE-Core rev: 2be3b2607fd164d18498299dbfc020ff17dd2ca9)
Signed-off-by: Brian Lloyd <blloyd@familyhonor.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(This patch was originally done against init-install.sh in
OE-Core rev 358f0584d779825307eec08c023b5ff14e72cf9e)
Previously, only unremovable hard drives are searched and are treated
as candidates of target disks to intall into.
However, it's possible that we're going to install the live image into
a removable media such as an USB. This patch enables this possibility.
In addition, this patch presents more information about the hard drives
so that user may have more knowledge about which hard drive they are
going to install their image into.
(From OE-Core rev: 7386acf4ab63a5959e4907b29459b767f2bf2fdb)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(This patch was originally done against init-install.sh in
OE-Core rev aa67b1333b4774e1845f562085f7048df65a644f)
Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.
Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.
(From OE-Core rev: 3b1bae7ad8d36930aae840175c6a3433c1469772)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some mmc cards do not have all the data files in /sys/block
populated. Check for existence before displaying the files
to avoid erroring out of the install process.
(From OE-Core rev: 1d73e3f9d9977382efdb0c111c556c6048bd60b4)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a hotkey for the GRUB 'test' menuentry. This can be used by expect scripts to boot into 'test' when doing runtime hardware tests.
(From OE-Core rev: 17b97fd6c724ba6e506cbadb18facdfd9c472e79)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init-live.sh scripts assumes that the boot label set by
the LABELS variable is either "boot", "install", or
"install-efi". If that variable is overridden to something else
we fall off the end of the case statement and the system locks
up. If the boot label is unknown, at least attempt to boot.
(From OE-Core rev: 98353862c08be2f1724aaad7aa4ed0521e3621f2)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that udev-utils package has been removed and 'udevadm' has been
moved to udev package, the initramfs-framework should also get rid
of the udev-utils package.
(From OE-Core rev: f0b8f08e13f395820172d16c9d4c016a0fbdbfe9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_EOF marker was not used properly
(space left before end of line).
(From OE-Core rev: 913fd224499c57c7596bd49e1eec5f570c3edf68)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file"
(From OE-Core rev: 5cd96e28825d345650be878d4b7be4fea2996839)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For automated hardware testing, boot process control
via serial interface is needed. As such, in grub, serial
line support is added upon testmaster image install.
Also add a specific timeout to automatically start
the master image upon start of testing phase.
Tested on multiple hardware targets without issues.
(From OE-Core rev: 219228805a4d5d822894c8f6c2526e1b9a8609ff)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file
(From OE-Core rev: 26a5121e966f465386da4ead40cc558fd877ce2b)
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
(From OE-Core rev: e5f6dc48930c8ff35df5cff3550ec2ee86641faf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
(From OE-Core rev: 8ae89d08454c11035eb2826a06e2243c9f2568b4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mount.sh in udev-extraconf was modified to use /run/media instead
of /media. Unfortunately, our scripts in initrdscripts have some
dependency on the auto-mounting mechanism proviced by udev-extraconf.
So these scripts should also be fixed to use /run/media instead /media,
otherwise, our live image cannot work correctly.
(From OE-Core rev: be0327b6a900be5434b6b1f08277faf2f65d5da8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using 'ls /dev/sd*' command to list block devices, we
should rather use 'cat /proc/partitions'.
(From OE-Core rev: fc5dfad6490d0b3f2529f84ae9dfbd6b00b5c380)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are meant to be used by a master image, for a simple
initial setup.
The install scripts are similar to the default ones, but:
- custom partitioning, replaces the swap partiton with a second root filesystem
- adds labels to the partitions
- preconfigures a boot loader entry for the second rootfs
Part of [YOCTO #5614]
(From OE-Core rev: 39fcab00cd3b85d40966689e31b4c7748f630739)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a gummiboot class similar to grub-efi class and makes the necessary
changes so it can be used for live/hddimg images as well.
One can set EFI_PROVIDER = "gummiboot" in local.conf to use gummiboot instead of grub-efi.
Gummiboot requires some kernel options that are not enabled by default, so one has to build
with KERNEL_FEATURES_append = " cfg/efi-ext".
The install scripts have been updated too, keeping the old behaviour around,
but accounting for the new boot loader config files (if they exist).
It can be argued that the installer and bootimg are a bit wierd and not necessarily correct,
but I wanted to have the exact same behviour with gummiboot.
With the default EFI_PROVIDER = "grub-efi" nothing changes, everthing should be just as before.
I've tested live boot, install and normal boot on:
- FRI2
- genericx86-64 on NUC
with:
EFI_PROVIDER = "gummiboot"
KERNEL_FEATURES_append = " cfg/efi-ext"
in local.conf.
(From OE-Core rev: b457e40fc69cc6503dc566f16495f03606e5333b)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows for setting the ROOT_IMAGE name on the kernel command line
[YOCTO #5387]
(From OE-Core rev: 00e3acde7910a5fb1d2e6b71187f2d9283319e71)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
