There are some left over tab characters in the python functions. This
removes them and resolves python 3 errors.
(From OE-Core rev: fafeb381c48291fa65c634c01c244843c8d7fad3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The quote characters present trigger python 3 characters type warnings,
we don't need them so replace them with normal quote characters.
(From OE-Core rev: 3c104443506cb89d72944e46096a94a80838a707)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* adding this extra functionality is an image- or distro-decision
* at least automount-rule/script breaks other automount solutions causing
misleading kernel messages as 'VFS: could not find a valid V7 on sda'
same as already sent by Koen Kooi [1]
[1] http://patches.openembedded.org/patch/48139/
(From OE-Core rev: 860cd2f9ba5803824ab59bf9c0e84b83f7907dc1)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SERIAL_CONSOLES is now set from SERIAL_CONSOLE if not already set.
This is a little bit gnarly because we have to create a separate service
file for each different baud rate; assume that the first baud rate is
the default, thus preserving the previous behaviour in the event there
is only one baud rate in use.
This change also installs the service file before modifying it in place,
allowing do_install to re-execute properly; additionally the service
file now has the correct permissions (i.e. no execute bit set).
(From OE-Core rev: cd89a71d0c3dce14d59134667bc47fa8210cfa7a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We already handle SERIAL_CONSOLES here and this is now set from
SERIAL_CONSOLE if not already set.
(From OE-Core rev: 40acb88afb2ebd2d468bb2fce51c6ce6bf3d8403)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The label field in /etc/inittab entries needs to be unique, and the
numeric label being used for the SERIAL_CONSOLES getty entries was
clashing with the entries added for standard ttyX entries added via
SYSVINIT_ENABLED_GETTYS. Use the part after "tty" in the device name
(which is what the comment further down explicitly says should be done)
as the label rather than a simple incrementing number.
Fixes [YOCTO #4374].
(From OE-Core rev: 28d3202befcec72554885f8ea9cb7985523b89f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove automake patch that is now correctly supported upstream
Codegen files have moved to glib-2.0, so correct packaging and
removal.
(From OE-Core rev: 0d13d9947262b09cd69bc526ea2738e50c658744)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, glib will probe for the existence of xsltproc and use that
to decide whether or not it wants to generate manpages. This has two
consequences, neither of them good:
a) the result of the build will vary depending on whether xsltproc
happens to be installed in either the native sysroot or the host
environment; and
b) if xsltproc does happen to be installed but docbook-xsl isn't, the
build will fail with "I/O error" messages.
(From OE-Core rev: b2e2c6e1a20ea4c53dea04992bb1b38890a959dd)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to the documentation, the only reason for needing ncurses is
to support colour output from msgcat. Make this optional so that
ncurses doesn't need to be built if colour output is not required.
(From OE-Core rev: a4040ad83984ee27fa9dc16d276c699d24b03b4e)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- patches updated
- nopw-option.patch dropped as the option is integrated since 2013.56
- compile tested for ARMv5 target
(From OE-Core rev: ce92c707f26aff8f02021c757056af4ecddb315d)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If USE_LDCONFIG is not set then we won't ship ld.so.conf. However,
eglibc still installs it which leads to a QA warning. Prevent that by
removing the file (and the subsequently-empty directory /etc) in this
situation.
(From OE-Core rev: 23b5dd2ab8a556fcef3aa34689310d9d5f61b3d1)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old script failed to parse unit files containing comments like
| #Alias=some-alias
or whitespaces like
| WantedBy = foo
correctly. Patch changes script to interpret keywords only when they
are at the beginning of a line and ignores whitespaces before the '='.
(From OE-Core rev: 443e75ee2c0e9a62df997aef24855bce54d39177)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the link from DESCRIPTION to HOMEPAGE and add a short SUMMARY.
Also move IMAGE_INSTALL line to be further down in the recipe.
(From OE-Core rev: be1f94152032f6bcbc0c37c6b57dbc6ab3caf6dc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SUMMARY for eglibc-locale, and HOMEPAGE in eglibc-collateral.inc
(used for eglibc-locale and eglibc-mtrace).
(From OE-Core rev: a677fcfbc1572f6ae7e2326ae0ab55522e24fe77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If it's not first boot, /tmp has already been symlinked to /var/volatile/tmp.
But the udev service starts before populate-volatile.sh starts. This leads to
a dead link at /tmp. As a result, trying to create any file under /tmp will
fail.
If a USB is plugged in before the populate-volatile.sh script starts, the
/tmp/.automount-$name file will not be created correctly. As a result, when
the USB is unplugged, the /media/$name directory is not removed.
So we create /var/volatile/tmp directory in the udev script to avoid this dead
link problem.
[YOCTO #3404]
(From OE-Core rev: 2f93c8466ca146c965585ea38210ddb5fb5754bd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depending on kernel version used, the system can hung when trying to
mount the extended partition (not the logical one) as it is a holder
for other partitions and does not have a filesystem in it.
To avoid this to happen we just mount partitions when these are using
known filesystems so it does not try to mount a partition for an
unsupported filesystem.
Reported-by: Vladan Jovanovic <vladan.jovanovic@gmail.com>
Reported-by: Leonardo Sandoval Gonzalez <b42214@freescale.com>
(From OE-Core rev: 895c9685a7f95dc84786213f945895a504a16254)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Vladan Jovanovic <vladan.jovanovic@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without disabling the tests in the native build, glib-2.0-native will need
libdbus-native to be present. As we don't run the tests, disable them so we
don't have build failures due to missing dependencies.
Also, the LSB override was missing PTEST_CONF so the same problem could happen.
After adding PTEST_CONF the LSB override is identical to the non-overridden
EXTRA_OECONF, so remove it.
Finally, to be explicit, put --enable-module-tests in PTEST_CONF.
(From OE-Core rev: 395b90054eccddc1c9062a9a8657ed4482b7710a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want systemd support we use systemd's udev, so disable systemd
support in this udev to avoid packaging the unit files.
(From OE-Core rev: 36aa37e693bcb76a96761847dbef6a015d96fd98)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libudev previously depended on udev, but this causes problems with multilib
if the user wants to install two variants of libudev as they'll pull in two
variants of udev, which will conflict.
Instead, remove the dependency and rely that the image pulls in udev in some
way, such as the commonly used packagegroup-core-boot.
(From OE-Core rev: 6168ea4e00fd1c8296fe770fa9e2ef00018f5621)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update-alternatives for multilibs are broken and nothing provides psplash in a
multilib build. This fixes the multilib code.
(From OE-Core rev: db1f6b24ddb2a19fb16b2ebb948bb3274b7ac295)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=f76d4b3549ca220fa4bf84db2756ab45e11d06a3
moved volatiles handling for /run to the udev code only. This breaks
sysvinit+systemd combined systems when building sysvinit images.
This patch hacks the udevd init script in systemd to provide
the missing symlink allowing the sysvinit images built with udevd
from systemd to work correctly.
(From OE-Core rev: 6c6e5dc0baccd0904f785b1f80f39b5f530779cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use ${PN} when specifing service files so that they continue to get packaged
with multilib.
(From OE-Core rev: d394d27b66cbeb4e57017d2a49605243586477ac)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When libdir isn't /lib the files that are in nonarch_base_libdir were being left
out of the -dbg package.
(From OE-Core rev: 60bb2f795a0b3e83de5861185446992fb91ffba0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously this was using ${PN}-syslog.service, which changes with multilib.
(From OE-Core rev: ee36f997e68f5a995baf361191cef7a46ff51203)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using multilib this doesn't get caught by the default FILES_${PN}, so add
it.
(From OE-Core rev: 53f1540780e5d4e8035118a1920202735bd0a370)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This effectively reverts the move systemd's libexecdir to /sbin. This caused
too many issues in other places and was not well enough tested this close to
release.
Rather than use base_libdir, the nonarch version is used to try and give some
chance of multilib not being totally broken in the release. Also some variables
are used that mirror the systemd build system to reduce the risk of using
variables that "work" in the general case but will break with multilib.
(From OE-Core rev: e921d43e213f93da176fd27e48b557f802443dec)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This effectively reverts the changes made in b49ddeb11c
to move udev's libexecdir to sbin. The changes caused too many issues in
other places and were not well enough tested this close to a release.
Rather than use base_libdir, the nonarch version is used to try and give some
chance of multilib not being totally broken in the release.
(From OE-Core rev: c50e50fdafad378d75b7b74259a3d55ca0fe3d18)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the mount command is not given the filesystem type to mount, then
it will try all the known filesystems. However, when a filesystem is not
supported by the kernel, the mount function call will return ENODEV.
The following patch, ecd90bc6aa,
introduced a problem because it bailed out on ENODEV too. Instead it should
have only bailed out on ENOMEDIUM.
[YOCTO #4308]
(From OE-Core rev: 82320d2074572477f26887eddc51dc2a1dfea403)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with external toolchain I have different HOST_PREFIX and HOST_SYS
AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy
then it tries objcopy without prefix which is found on host, but
that objcopy does not work for arm libs
* with internal toolchain gperf is not prefixed with HOST_PREFIX, but
fallback to "gperf" only finds the one in native sysroot first
* based on http://lists.linuxtogo.org/pipermail/openembedded-core/2013-April/037985.html
(From OE-Core rev: 6ae99136f1c1c59f4e55331c43cf0c0bac5abcdd)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The install boot option was giving the following error when one tried to
install the live image on a permanent storage of a BSP.
cat: write error Invalid argument
Installation image failed
sh: can't access tty: job control turned off
Further digging into the issue, found out that the install script was trying
to do this:
cat /proc/mounts > /etc/mtab
And in the base-files recipe the /etc/mtab is made soft link to /proc/mounts.
So the cat command was failing to write on /etc/mtab. As the contents of
the /proc/mounts is already reflected in the /etc/mtab file due to the
symlink-ing, there is no need for this step to recreate /etc/mtab in the
install script. So just removing this unnecessary step, which solves the
install issue of the live images.
Fixes this bug:
[YOCTO #4229]
(From OE-Core rev: f8663eac872882e94d956b1b604304e92b865766)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New coreutils (8.15 onwards) build /usr/bin/realpath, which busybox also builds.
Add it to the alternatives handling to avoid file conflicts.
(From OE-Core rev: 826c18eb1c69f5e3689b5b0ef188f74ae930a050)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
init-live.sh depends on udev performing automounting, which happens in
udev-extraconf. Explicitly depend on it so that we always have it installed.
(From OE-Core rev: a608d74e69ca1efe5f2b176c000fb8212797d056)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using busybox mount the filesystem won't get remounted as 'rw' and bootup will fail.
This fixes the regression seen after switching from 'danny' to 'dylan'.
(From OE-Core rev: 15a91361a0b5a44161d2dbcf2be6240d86123ad9)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add back inetd and inetd.conf files which are needed if
CONFIG_INETD is enabled in the defconfig. Grabbed these
files from oe-classic
This patch is based on the previous patch for denzil:
http://patches.openembedded.org/patch/33235/
(From OE-Core rev: 929c738787b6f513ce235ed5f7753408a570d632)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After using 'bitbake -c menuconfig busybox' to customize defconfig,
do_install fail to detect the changes. Grep configs in ${B}/.config
instead of ${WORKDIR}/defconfig.
(From OE-Core rev: 5c088c2d3b23026752649d077ee44fe3dbe26aa4)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In each of these cases allarch is used where the package in question has a
dependency on things which are not allach and change when MACHINE is changed.
This leads to a rebuild of the package each time MACHINE is switched and
the sstate checksum changes. The dependencies in question are not suited
be being marked as ABISAFE.
(From OE-Core rev: 087a680429efa713a98fbb89f927b046fe07f87c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
