Its bad practise to poke into the sysroot without knowledge of sstate.
This adds a patch to python allowing us to account for cross compiling
and allow it to find the Makefile/pyconfig.h files without needing them
in the sysroot for do_compile/do_install to complete.
Tested on two architectures and compared with buildhistory with no
significant delta.
(From OE-Core rev: 16da4f75a75dc8020803df9ea73a2a7ead88cc5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake make-native; MACHINE=qemuarm bitbake icu
would fail with:
*** No rule to make target `uconvmsg/libuconvmsg.a(uconvmsg/uconvmsg_dat.ao', needed by `uconvmsg/libuconvmsg.a'. Stop
which is caused by a bug in make 3.82 which the attached patch fixes.
(From OE-Core rev: 06e64233a3a00a3c60fab7d92cbb18cd9feadc8d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently smart does not support recommend dependencies. Add the first set
of 'support' for RPMSENSE_MISSINGOK (the flag that makes something a
recommend). This initial support ends up ignoring the recommendation, but is
written in a way that it will be the basis of eventual support.
(From OE-Core rev: 4f1f6d39803c94cf9ff55f0a4616e7a1703bcef6)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add a number of additional RPMSENSE values to the python module to better
support the dependency calculations in SMART.
(From OE-Core rev: 431352d063b353ee0e0eaa5bfe24450962d71d6b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial integration, basic functionality such as 'smart query'
has been tested. Active use of remote feeds and such has not yet been
verified.
Thanks to Paul Eggleton for corrections and bug fixes for the initial
integration.
(From OE-Core rev: 92182ca88aff9cec04b2af5e9babaf33bf61f0af)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If python support is enabled we want to make sure that the RPM python support
is packaged properly.
Move the components into the site-packages directory, move the .la files to a
new -dev package.
Add "rpm" as a dependency of python-rpm, otherwise rpm and the associated
libraries won't be available.
Fixup python wrapper to handle automatic relocation, as supported by the
vendor WINDRIVER configuration. (Based on a patch from Paul Eggleton)
(From OE-Core rev: cd0473a145cec51be736b6141b0b18a82b64d483)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sstate-inputdirs and sstate-outputdirs don't match with ending '/'
characters, the manifest file can end up corrupted. This change
ensures the metadata is consistent in ending do_populate_root tasks
with this character to avoid manifest file corruption.
(From OE-Core rev: 3910eaf88d14904eef85b9e391387547df7fc54e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No functionality change, just a readability improvement
(From OE-Core rev: 7a27f95c2800285d7f97fead616620bfd7dabbe3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
(From OE-Core rev: bb67ddeb2eed3e25c626a279ef53a7e8c7bfe6f2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update dependencies for perl modules again. When only install
perl-module-file-glob, run perl script with "require File::Glob;" will
fail. Update dependencies to fix that.
[Yocto 3069]
(From OE-Core rev: 1554e690d8d074f3bbe484d2acfebde4b94e3738)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update autoconf runtime dependencies on perl and perl modules. And
remove RDEPENDS for nativesdk because the nativesdk-autoconf has same
dependencies with autoconf.
Then fixes autoreconf runs failed both on target and toolchain.
Bump up PR.
[Yocto 3100]
(From OE-Core rev: 19a4d6498b262a53456f43fabb66d821014d2656)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Run autoreconf fails because it uses several perl modules and they
requires other perl modules. So update these dependencies for:
perl-module-exporter
perl-module-file-glob
perl-module-file-path
perl-module-file-spec
perl-module-file-stat
perl-module-io-file
perl-module-io-handle
perl-module-io-seekable
perl-module-posix
And RDEPENDS rules in file perl-rdepends_5.14.2.inc don't work for
nativesdk perl module packages. Replace all "perl" with "${PN}" in the
file to fix that.
In nativesdk.bbclass it calls
oe.classextend.NativesdkClassExtender().map_packagevars() to map package
vars include var RDEPENDS. In map_packagevars():
for pkg in (self.d.getVar("PACKAGES", True).split() + [""]):
the value of var "PACKAGES" may not be calculated correctly, so for
all the nativesdk packages created by
PACKAGES_DYNAMIC_virtclass-nativesdk += "^nativesdk-perl-module-.*"
dependencies are wrong.
This is similar with 51cbb5ae76.
Bump up PR.
(From OE-Core rev: c1f1368a680ae596e4d974a2cbbd253abc5118f8)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Every package provides itself. While printing package information all
fields are printed only if there is any relevant info for them. For
example: a package with no "Replaces" won't get this printed at all.
Packages which provide only themselves, were printing this field but with
no values. This patch skips this field if the package provides only
itself.
(From OE-Core rev: 19af022c73ebc53f7008a016c1e7c584fb7b0054)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While removing a package with opkg, the process shouldn't be blocked if
another package RECOMMENDS the package wanted to be removed. This is
because, while generating the dependencies, opkg adds dependencies to
depended_upon_by even if dependency's type is RECOMMEND. The fix is to
skip dependencies of type RECOMMEND while constructing depended_upon_by.
[YOCTO: #2431]
(From OE-Core rev: 08a5ef44c7aa58ffcad0457e8dda3504f2c3192b)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the move of the strict/vars/config/warnings modules to the main perl
recipe, we need to RPROVIDE those modules to ensure that package dependencies
on those modules continue to work correctly.
(From OE-Core rev: fe88ae8605f22d9075e4200159aa66605ec36587)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* to keep ${PN}-locale from
bitbake.conf:PACKAGES_DYNAMIC = "^${PN}-locale-.*"
(From OE-Core rev: 73252b16b501c0986b0ca0895e4534895a9ba3db)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
(From OE-Core rev: 2f3ebdfa5f42dae51063b043cc4b0fbe20b40064)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes 2 problems.
The first one is that when run "perl -V" on target, it fails with lack
of some .pm files. So add these perl module files to package perl itself
to fix this failure.
The second problem is that package nativesdk-perl-modules doesn't depends
on the single perl modules.
In the .bb file, dependencies of perl-modules are set by:
RRECOMMENDS_perl-modules = "${@d.getVar('PACKAGES', True)...}"
The PACKAGES would be reset by do_split_packages since:
PACKAGES_DYNAMIC = "perl-module-*"
PACKAGES_DYNAMIC_virtclass-nativesdk = "nativesdk-perl-module-*"
Then:
1) The target perl-modules RRECOMMENDS on perl-module-*, this is what
we expect.
2) But the nativesdk-perl-modules doesn't RRECOMMENDS on
nativesdk-perl-module-*, this is not what we expect.
The value of PACKAGES after do_split_packages has been set correctly (it
contains the nativesdk-perl-module-* packages)
But the:
RRECOMMENDS_perl-modules = "${@d.getVar('PACKAGES', True)...}"
doesn't work correctly for nativesdk, the
d.getVar('RRECOMMENDS_perl-modules', True)
doesn't get the new value of the PACKAGES, it gets the value of PACKAGES
before the do_split_packages.
This patch will fix the problem.
(From OE-Core rev: d50be1876f7a41822ef7e73207fdf8cccd39e400)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allow the relocation of libexecdir to be done correctly
for the qemu-brigde-helper.
(From OE-Core rev: 945c8f5c687ec61c312209e075edc402f6272186)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address the following when libexecdir is not set to /usr/libexec
WARNING: QA Issue: qemu: Files/directories were installed but not shipped
/usr/libexec
/usr/libexec/qemu-bridge-helper
/usr/libexec/.debug
/usr/libexec/.debug/qemu-bridge-helper
(From OE-Core rev: e2fa821033785a44f80002eafac73b7e110023ce)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 9c9ea24b115a9bb87df1323b5f185ce426262aec made strace depend on perl because the
strace-graph script needs it. However, this cost of the dependency is large (building
all of perl) and the value of the script is marginal. Let's just delete the script
instead and remove the dependency again.
If anybody wants strace-graph then it should be packaged in its own recipe and that one
can be made to depend on perl without disrupting the main strace package.
(From OE-Core rev: 2e887af1c81f9b373684180f61a7c25163ed0e2c)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you:
bitbake sed-native
bitbake libtool-cross
then libtool-cross has SED="/path/to/sysroot/sed" which is incorrect. If that
is reused from sstate or sed-native is cleaned, the build will fail.
This patch simply sets sed to be "sed" since we're not on systems where
the sed from PATH is broken.
(From OE-Core rev: 86c6fa8175482283268dfa8782c6643a3510e0fd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This line causes pkgconfig-dev to replace pkgconfig so the package with all the files
in is replaced by one with no files. This makes no sense and hence we should just
remove this broken line.
At this point in the release, this is the safest way to fix this even if an empty -dev
package is left available.
[YOCTO #2878]
(From OE-Core rev: 5bed2bb831b379a8fbf2f725435af4b7c934359e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perl.c uses an ARCHLIB_EXP define to generate compile-time code that
adds the archlibexp path to @INC during run-time initialization of a
new perl interpreter.
Because we've changed this value in a temporary way to make it
possible to use ExtUtils::Embed in the target build (the temporary
value in config.sh gets re-stripped out during packaging), the
ARCHLIB_EXP value that gets generated still uses the temporary version
instead of the original expected version (i.e. becauses it's in the
generated config.h, it doesn't get stripped out during packaging like
the others in config.sh).
This creates an unmodified version called archlib_exp that gets used
by a modified config_h.SH to get the correct value into config.h
This patch uses an unmodified version of archlibexp called
archlib_exp, introduced to config.sh, which is used to generate the
correct value of ARCHLIB_EXP into config.h
Fixes [YOCTO #3099].
(From OE-Core rev: cbcfdeb1d55e2e76f199750bda401bad126ae234)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a problem in commit ad23395cd1 since
gettext-nativesdk was translated to gettext instead of nativesdk-gettext.
This fixes to use the correct dependency.
(From OE-Core rev: a6e325342cb489e05927d6cb2bb0a24fa6c20ef8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If qemu-mips was disabled as done in some distros, this wrapper would fail.
Therefore check if the file exists before wrapping it.
(From OE-Core rev: 9ec1c06915b10d142bf5646396c4e91bb61a40a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were mistakenly writing what was meant to go to stderr into the
output file, so when the "Multiple matches" error showed we weren't
actually seeing the matches printed.
Also change the wording of the "Unable to find package..." to "Unable
to resolve package..." instead so that it makes more sense if it is
printed after the "Multiple matches" error.
(From OE-Core rev: c26542eb4e8707b9639ec309a44809a728839db8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu-mips user emulation binary segfaults when running any kind of
binary. This is due to a MMU access fault in the virtual CPU. This
problem has been introduced in qemu when 4GB of vmem were reserved for
32-on-64 bit.
This workaround will need to be reverted once the proper fix is found.
[YOCTO #3143]
(From OE-Core rev: 53b3103abdf21123b1c7be49b05cfe97a7cd9ed7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This binary is provided by util-linux nowadays. Fixes:
WARNING: The recipe is trying to install files into a shared area when those files already exist. Those files are:
/fast/jenkins/workspace/.../tmp-eglibc/sysroots/x86_64-linux/sbin/findfs
(From OE-Core rev: e71c6bb75239926aceebbb53d158cbf8de6112a4)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
binutils will build differently if this feature is enabled, so
make the do_configure step depend on it
(From OE-Core rev: 0788cf349fe37ef4a36c626dbc396c97d1ab14d7)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
chrpath is assumed to be provided by the build host system. This means
we need to provide a replacement version and install into a specific directory
to avoid races.
(From OE-Core rev: 147c44c882a3dc667c079165d3ddc9d78b702286)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This converts the option to maintain the existing behaviour unless the option is
specified. We do specify the option during the builds themselves to ensure what
the users expects is built.
(From OE-Core rev: 0cc479699fe885049625d54c712b500c1b719e75)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All variants of opkg are currently configured --disable-curl so there
seems no point in depending on it.
(From OE-Core rev: 875f1eb876c17c038a77bc7b7a5fed775d9fd3ea)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Even when installing onto a live target system, calling sync() during
package installation is of somewhat questionable benefit. But calling
it on the build host during rootfs construction is certainly useless and
can cause I/O to stall for several seconds on even a moderately sized
host which is clearly not desirable.
(From a patch originally by Mike Crowe.)
(From OE-Core rev: f48a68177510e8f2d4fcc3725a6dfc41a9a8e96b)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
