subversion needs an explicit dependency on sqlite3, otherwise it
does not build. Tested by building core-image-minimal.
(From OE-Core rev: 47aca0f0f79c30d1df1f89c710d3e354f436145d)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gets patch is not needed anymore in this version. The
manpage patch was updated for this version.
(From OE-Core rev: 2f11d409e20d90f2d619b4d92495c3fcd30584ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: bc45d990938c1b1d761cee6e90464d22f854a2ab)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 73ee5587a46751ed39a181b3ff2a12d4a3086c21)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_bsddb module in python 2.7 could be built only with db version
between 4.1 and 4.7. A patch was added to avoid build warning
about this for [YOCTO #1937] but not actually fixed it.
This patch enable _bsddb module be built with db 5.3, and remove
--disable-statistics from the DB5_CONFIG to fix segmentation fault
when using _bsddb module in python.
[YOCTO #2749]
(From OE-Core rev: 11267f8a1ccf65142988b095351a84b0fa0fcbcf)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tclConfig.sh is changed in do_install for cross compile and
is installed to STAGING_BINDIR_CROSS, but if SSTATE_DIR is set
and tcl is from sstage, tclConfig.sh can't be found in
STAGING_BINDIR_CROSS, add ${bindir_crossscripts}/tclConfig.sh
to sysroot stage can fix it.
[YOCTO #2891]
(From OE-Core rev: 7a97abb3f1c2ff8fd2dc7c59f866430cf99ab82d)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, a stale limits.h may be detected in STAGING_DIR_TARGET
which would result in a different limits.h getting generated by gcc-cross-initial
that references it. The referenced limits.h will then not get found by eglibc-initial
causing rather strange build failures.
The simplest solution is to create a temporary sysroot containing only the things
gcc-cross-initial should care about and this results in a correct limits.h file
regardless of what else may have been built.
(From OE-Core rev: 9c304eae0724474902fe2f3150adc6af115af9ba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some patches (disable_goops_optimizations, fix_cross_compilation) don't
seem to be needed anymore. Others (change-install-data-hook, mark-unused-modules)
were updated to work on 2.0.6. Tested by building and running guile under
QEMU with core-image-sato-sdk and also builing guile on MIPS.
(From OE-Core rev: 310f169d3d89f3a4fc6a540974a30c7eb565db3a)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--install-lib= is required to be passed via distutils install
otherwise the install location gets set to whatever the python-native
location is.
(From OE-Core rev: d8ca8b21c6959e772fa1b437ce498b7759fae0ab)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is needed so that all SDK binaries have the PT_INTERP section
size set to 4096 (max path size in Linux) in order to be able to parse
the binaries later and change the interpreter to the path we want.
(From OE-Core rev: 9bf657bbdfe7c1a9dff1cc121eab496e3e407197)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this set, in the case host=target (which it does for on-target
gcc), the native header directory is set to the target sysroot with
no prefix. This means it would look for sdt.h on the build system
instead of in the target headers and this can lead to build failures
and is host contamination of the build.
The correct fix is to explicitly set the native header directory to
the correct location and then the headers get detected correctly.
(From OE-Core rev: 404d2d490fc347203e89d274530c17fb5f0aa20f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In guile meta/Makefile, what install-data-hook do
must be run after install-binSCRIPTS.so it's a exec hook, not a data hook.
If keep these exec-hook in data-hook,when we run make with multi-jobbing ,
install-data-hook and install-binSCRIPTS will be separately
processed in different thread, no any dependence.
that will cause error sometimes.
[YOCTO #2796]
(From OE-Core rev: 018d5b87bdf00e85fe34e6276bd99e118843d704)
Signed-off-by: Song.Li <Song.Li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update replaces the half-baked --arch logic with the use
of $CFLAGS to pick compiler flags, on the grounds that it makes
a lot more sense for the build system to pick flags than for
pseudo to try to guess what they should be; this should allow
pseudo to at least compile for targets, and possibly run on
them.
This doesn't solve the problem of guessing how to forcibly
build the 32-bit variant on hosts, because we really don't
have a general solution for that. There's no idiom for "given
this set of compiler flags and this architecture, what flags
would you use to request a 32-bit compile instead?" So we
basically ignore that for now. If someone comes along trying
to use the build system to build pseudo-native on a 64-bit
host that also supports 32-bit binaries and isn't x86, we
will revisit this.
(From OE-Core rev: 711fcb4f10e2cefd7ff6e1921d87d1cad840d0c8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce the number of calls to the packaging tool, especially in the case
of rpm, using helper utilities to gather the required information more
efficiently where possible.
(From OE-Core rev: d0b8a98c5b46c305afd389fc862b3bf0c6f1eaab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the performance of the RPM backend during do_rootfs by
performing most of the package name to file resolution in a separate
utility written in C, processing the entire list of packages at once
rather than running rpm on the command line which loads the RPM database
for every package.
(From OE-Core rev: 9135d351ba7cb21e50239d2b310565680bd4fdca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
follow Richard's approach, modify bzip2-native recipe to install bzip2 package
binaries to STAGING_BINDIR_NATIVE/bzip2-native to avoid problems when other
package is doing upack to reference bzip2. libbz2.so* still installs to
STAGING_LIBDIR_NATIVE.
change python-native to depends on bzip2-replacement-native instead of
bzip2-full-native and add EXTRANATIVEPATH for bzip2-native.
Didn't add bzip2native.bbclass as python-native is the only user so far.
(From OE-Core rev: 5bf3541836457465aa76577bfb41cdf6316213c9)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2812]
Since files installation dirs are DESTDIR/etc/, DESTDIR/sbin etc
in Makefile, not DESTDIR/${sysconfdir}/, DESTDIR/${sbindir}/, for
the native package, a prefix can not be inserted which is needed
when do the next step of install and do_populate_sysroot.
Now we define do_install_virtclass-native in which DESTDIR is
${D}/${STAGING_DIR_NATIVE}
(From OE-Core rev: bb80a5f6f383d874b314af4263695e5a6b2d84cb)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I caught this when running user mode qemu for ppc/e500 applications
which had SPE instructions in them will abort with illegal instruction
error all the time.
The patch is already applied upstream we needed a backport into 0.15.x
(From OE-Core rev: febec229b27279345b756d2fd83f3766915fcd67)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pkg.m4 file should be packaged as part of the base package
instead of the -dev package, it had been in the base package, but
I seemed to have missed that it moved during my PACKAGES reorder,
and this caused the meta-toolchain to break
[YOCTO #1908]
(From OE-Core rev: d2dba9aebef323a57824b41d09991850c703be35)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was causing the x86_64-linux-guile script to not have all the
environment bits needed
V2: Forgot PR Bump!
[YOCTO #2835]
(From OE-Core rev: be89b81bdad0489d43d33342243b5d1da76ec3c4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2829]
mtools commands use cp850 as the "mtools_default_codepage", they would
use this to do some coverting tasks.
So, add glibc-gconv-ibm850 to RDEPENDS for mtools commands to run
correctly.
Also add other MSDOS/FAT codepages related packages to RRECOMMENDS.
Code Pages for MSDOS/FAT:
*http://msdn.microsoft.com/en-us/library/cc195051.aspx
(From OE-Core rev: 5333610bb4b5014372a11e283465ff0f819db49d)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
currently gcc installs a limits.h which references to another
limits.h which it expects from target sysroot and that header
in target sysroot will come from eglibc. So we need to break
this catch-22 and hence we install a self sufficient limits.h
which is then happy when referenced and doesnt complain about
missing limits.h from target sysroot.
This is mostly used when eglibc-initial configure is run
(From OE-Core rev: eeb445ecbc651ad614a4fc492039bdad0747d45d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remake is a patched version of GNU Make that adds improved error
reporting, the ability to trace execution in a comprehensible way,
and a debugger.
[YOCTO #2402]
(From OE-Core rev: 823fab378bd46da6a296a67f981dffb31b1c8061)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_package writes out shlibs data and libgcc can depend on the values
there. We therefore need to express the depdency so that sstate can account
for it for example.
Without this a version change in eglibc can "psersist" in the sstate cache
and corrupt builds.
(From OE-Core rev: 4148bc80c008d25c8a536c7c7dfdeac1669a6662)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative to the inherits list
(From OE-Core rev: 0751ba97969bf7ef21e0c9a0bbe52001052f02af)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative to the inherits list
(From OE-Core rev: a043a7737da1123df5ff06ede3e9ed1fdcc163f1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative to the inherits list
(From OE-Core rev: 7f3105d380370ae1f4fbc2e8295c80f22dfb16cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add pythonnative onto the list of inherits and update the paths to the binaries
referenced in the recipe to the new paths.
(From OE-Core rev: 284a65d55f0ffad0f4f7f32d72da0f9410578643)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update python-native to install the binaries in the python-native directory,
add pythonnative.bbclass to let recipes that need python-native use the
binaries and update disutils access the new binaries. Update distutils-base
to inherit pythonnative.
(From OE-Core rev: a2e554f731437545e9483a7a73e6847c03f6f48a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These repos are not setup to serve through http protocol
(From OE-Core rev: add617cbeac9fcf4621cca45a0800c5ab6239c5a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
e.g. libfl from flex is needed for target
binutils to link otherwise it can fail to build
(From OE-Core rev: 627725700ee9e2ca39a19f19a77cd772cd8ecf9f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TCL_INCLUDE_SPEC -I/usr/include will cause problems cross configure/compile
TCL_LIB_SPEC -L${libdir} will cause problems too when link.
(From OE-Core rev: d454f8055b21c4d01dd1e2faf1625e2a1e5c25f2)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nasm has a build dependency on groff-native
In one incident, there was a case where nasm-native compile phase failed
with the following:
+troff: can't find `DESC' file
+troff: fatal error: sorry, I can't continue
During this, groff-native was in the sysroot install phase.
To remedy this, adding groff-native in nasm's dependency list.
(From OE-Core rev: cd108a55ea58501e91923f348edca9ba736933c7)
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove brute-force flattening and bump PR.
Refer to -ftree-switch-conversion emit_case_bit_tests(),
-ftree-if-to-switch-conversion et al in 4.8
(From OE-Core rev: 2eb0e56217137ece3d86a70676a3f3c8db525459)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many recipes are now having to define PERLPATH and PYTHONPATH variables.
Creating USRBINPATH in bitbake.conf means we can remove all these lines
from the many recipes now needing this and simplify the code changes
needed in each case, reducing the chance of errors being introduced.
Also fixup glib python binary location issue and fix function indentation.
(From OE-Core rev: cf63d9068c3a8c635dfc240d30dfff278be9b0e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu.inc: on older kernel build hosts that have < 2.6.20 which
doesn't support kvm yet, build will fail. Add a check in do_configure
to make sure whether linux/kvm.h exists for nativesdk build.
(From OE-Core rev: 7d49af3a811472a2a47453bef0813b89c6331ae7)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
