The 4.4 kernel has been under test via linux-yocto-dev, and is the next
LTS/LTSI kernel.
So we take our -dev support and created a named/versioned recipe for use
in upcoming releases.
(From OE-Core rev: 2dbc788bc3988532f0932e8e51e24ba702c28f6a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This works around a limitation of the chkconfig update-alternatives, so it
works with all our update-alternatives providers.
(From OE-Core rev: f78c640f1f41eb12ef7919e7dc99aae7db6f6b17)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In preparation for the introduction of new (supported) kernel versions,
we remove the 3.14 and 3.19 variants.
The kernel trees will still be available, but the recipes are removed
from master. These versions can still be built on older releases, or
with private copies of the recipes.
3.14 LTSI is replaced by the 4.1 LTSI kernel, and 3.19 will be replaced
by 4.4+.
(From OE-Core rev: 6814521d0b88ee66442158ed70e77cbdd35d4782)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest 2.7 stable commit which incorporates changes
for building against the 4.4-rc kernel series.
(From OE-Core rev: a9fe7afafc7645d33941926e097c7d88cbcbfa53)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto SRCREVs to pull in the following change:
Author: He Zhe <zhe.he@windriver.com>
Date: Wed Dec 2 01:31:31 2015 -0500
fs/yaffs2: fix missing checkpoint on yaffs
For yaffs file system, the mode of reading or writing is restricted
at four pointer where are mnt->mnt_flags,mnt->mnt_sb->s_flags,mtd->flags and
dev->read_only,the first three is used handle file and file
system(eg,remount) operation, and last one(dev->read_only) almost is
used handle checkpoint of yaffs2. However, in current code, the
dev->read_only only can be changed at first time when the yaffs2
file system is mounted, later it can't be changed again(eg,mount -o
remount), the result is that the checkpoint's saving operation
always can't succeed if you set readonly mode for yaffs2 file system
when it is mounted at the first time.
To fix this issue, we implement yaffs_remount_fs() which allows the
rootfs to be remounted as r/w.
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 289fd2bf61d0761a93d17f18b9079fc9f61e0031)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop 0001-ioctl.c-Fix-build-on-3.19.patch and
0002-Fix-tests-Makefile-usage-of-LDLIBS-vs.-LDFLAGS.patch, the code
has been fixed upstream.
(From OE-Core rev: 762b3111f3124ee75404835da751fb95b8466fd4)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the script file kdump,it provides the follow support:
1. Load a kdump kernel image into memory;
2. Copy away vmcore when system panic.
(From OE-Core rev: c2492edcb9366ed1741fc6be7d41bc17844041fd)
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some recipes overly-split -dbg packages were merged into PN-dbg. Unless
there's a very good reason, recipes should have a single -dev and -dbg package.
(From OE-Core rev: a3b000643898d7402b9e57c02e8d10e677cc9722)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the autodebug package generation logic, specifically setting FILES_${PN}-dbg
isn't needed in most cases, we can remove them.
(From OE-Core rev: 3ab59d49dd7c18e194b58d1248b4b87709b5a738)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code has support and checks for Python 2 and Python 3 however
during the development of 2.7 release a requirement for Python 3 was
included.
The Python 3 is required for runtime tests to run however those are
not in use now so we can just disable the enforcement for now.
This reverts the commit restoring the Python 2 support.
(From OE-Core rev: 8807f4fd8a9ccdcdec016d87fd18fd0717f35dca)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add latest available firmware binaries for RTL8192CX chipsets.
These new firmwares have been released in 2012, have been used
by the mainline kernel as preferred firmware since 3.13 and
even backported to stable branches.
(From OE-Core rev: 2dc67b53d1b7c056bbbff2f90ad16ed214b57609)
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the 4.4 fix for 6lowpan:
Author: Wu Zheng <wu.zheng@intel.com>
Date: Fri Nov 20 13:25:57 2015 +0800
Bluetooth:Fix the connection fail of 6lowpan over BT LE
When two devices with 6lowpan over BT LE connect each other,
6lowpan over BT LE channel is set up between the two devices.
However, the status of channel is not right.
It always is set to CONNECTED and the channel can't be created.
The status of channel need to be removed when connection is created.
(The patch's reference from
b0c09f94ff1660a1873549b788c998284ea5fb8a)
Signed-off-by: Wu Zheng <wu.zheng@intel.com>
(From OE-Core rev: 2b6a6cad90bfef3afd5a721ec985f71336914fa7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 SRCREVs for:
Update the mpc8315erdb.dts to contain the eeprom device
information. Coupled with adding "MISC_DEVICES" into the
kernel configuration, we have a working eeprom.
Signed-off-by: Jingdong Lu <jingdong.lu@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 47a222ad6f3ee8b14b9eea28b63397077978f42f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lttng-sessiond program uses pthread_cancel, whose implementation
in glibc requires libgcc_s.so.1 to be present.
(From OE-Core rev: fff5fe9f356098457c4fd56cb95c3e8afde2defb)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
