This dependency accidently disappeared in the 219 upgrade, so add it back.
(From OE-Core rev: 4636269f0d69ac1a80f3f1cc5979fb2b425513eb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The testapps packagegroup was the only user of owl-video, and now that has been
replaced by gst-player this can be deleted.
(From OE-Core rev: 8b6080cd2a9b5ce029b62958aa68b6684be9682c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
owl-video is a bad video player that doesn't work very well, use gst-player
instead for testing.
(From OE-Core rev: d620f6a19e104e2cd7eaf060429df4a41a504206)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gtk-play binary is packaged in gst-player-bin...
(From OE-Core rev: ee74395813225d6e33acb319239a7cd0452c947d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forces the creation of a configure script for ctypes/libffi Module
by calling autoreconf after it being deleted on do_configure().
Fixes configuration hence compilation of this Python module.
[YOCTO #7373]
(From OE-Core rev: dd23f79c9ac4782fecc408fc14e66c0ce81f6973)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
os.walk() returns symlinks to directories in the "dirs" lists, but then never
enters them by default. As a result, the old code applied neither the
directory handling (because that is active once a directory gets entered) nor
the file handling, and thus never packaged such symlinks.
The fix is simple: find such special directory entries and move them to the
"files" list. However, one has to be careful about the undefined behavior of
modifying a list while iterating over it.
This fix was required for packaging a modified base-files that created
symlinks into /usr for /sbin /lib and /sbin.
(From OE-Core rev: 9c4ab427b6acbc3f708860adace65393562227a7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpcap was not previously installing a pkg-config file. Add a basic one
that will allow using 'pkg-config --libs libpcap', for example, in recipes
rather than 'pcap-config', which frequently returns incorrect information.
(From OE-Core rev: 0f51c1260ac53aa4843e29b00cd600eb64074260)
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
219 has been in the docks for sometime, the older patch got merged
this patch is now upgrading 218 to 219
Make all patches using git
Change-Id: Ib0350144592aba26cad56c13c9a5522515915c58
(From OE-Core rev: 041570e584b98b580cc75f9ee23372da74a84377)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gaku was buggy and use GStreamer 0.10, gst-player is less buggy and uses
GStreamer 1.x.
(From OE-Core rev: 4866840b1c2998c1a57865e9408657259d908213)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Gaku media player was always a bit incomplete and had some serious bugs.
gst-player doesn't have these bugs, is maintained, and uses GStreamer 1.x.
(From OE-Core rev: 09fea7f3c0520e555af95234ceb860bd9b4d2878)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gst-player is a convenience library for handling media playback in GStreamer.
It also has a sample application that can be used as a basic media player for
testing.
Patch in a file selector for use without a terminal and a desktop file so it
appears in the desktop.
(From OE-Core rev: 07e79c259dda660715fcdf802af66273209670ba)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems that the --nofork option genuinely stops konsole from going
into the background now; I'm not sure when this changed but it does seem
to be working so we can use it. (Tested with Konsole 2.10 and 2.14.2).
Fixes [YOCTO #4934].
(From OE-Core rev: 49b21abf1020b2eefbbec98415c3d7de8827c993)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix up some issues introduced by OE-Core commit
818c94f5b9882c2028ef9f056714a0a3c9045551:
* If we want to support versions with more than two parts, versions with
only one part, or versions with non-integer parts, then we have to
stay with strings. We can use distutils.version.LooseVersion() to help
with comparisons.
* We don't want a warning when launching gnome-terminal 3.10+ and
logger.warn() doesn't take a first integer parameter anyway
(logger.debug() does).
* Also clean up tabs.
(From OE-Core rev: 565d4a144ab3b8fe04950392497de1e0cf1152a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--disable-factory has been disabled in earlier versions of gnome-terminal
but from version 3.10 it raises an error and quits. This makes devshell
unusable with gnome-terminal >= 3.10. This patch checks for the version and
removes --disable-factory if you have the terminal version 3.10 or higher.
(From OE-Core rev: 818c94f5b9882c2028ef9f056714a0a3c9045551)
Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove upstreamed patches as well as patches which arent needed anymore
since features are dropped from systemd e.g. userspace firmware download
Tested on qemux86
Change-Id: Ic53aaad198998de146c3a7702ef17de871de9de6
(From OE-Core rev: c8a9d74ee78266893497a6b60329f6ae79c0394d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd has a build-dependency on util-linux for libmount, and util-linux has an
optional build dependency on systemd.
The features in util-linux that enabling systemd gives you are:
* lslogins can show recent journal entries from the user
* uuidd can use socket activation and has a service file
* fstrim has a service file
* logger can write journal entries
These are not worth the overhead of maintaining two util-linux recipes to
bootstrap the cycle, so disable systemd support in util-linux.
(From OE-Core rev: e9b13af813ac74144fea7479208ae0e699518093)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we modify to use -Os
-Werror doesnt go well with it, glibc needs to be
cleaned up for that but until then lets disable -Werror
when using -Os
Also updates the options group patch to work better with -Os.
(From OE-Core rev: 98e1dc574ef3be668d6a42232ad030d1af93c49f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recent change to this file added a runtime dependency from ${PN} on
${PN}-meta since users tend to believe that installing the main
package will bring in all of the individual plugin packages, which
previously was not the case. However, since all plugin packages had a
dependency on the main package, this caused all plugin packages to be
pulled in whenever one plugin package was installed...
Since the main package is now guaranteed to be empty, there is no
reason for the plugin packages to depend on it any more.
(From OE-Core rev: 29143391029bdb1a5b23724017acb363b11ed6a8)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Given that bitbake.conf sets the default values:
BP = "${BPN}-${PV}"
S = "${WORKDIR}/${BP}"
there are a number of recipes that set the variable S completely
superfluously, so get rid of them.
(From OE-Core rev: ebe8578df3f162045086cd60a129eb7ac3eacf4c)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using iproute2 to remove the route all default rules
will be removed. Scope the removal by interface like it is
done with ifconfig.
(From OE-Core rev: 2127a57cb1b3d83f9f7640051403e47e485b132c)
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Linux allows to install multiple default routes with
different metrics. Start with a metric above 0 to
allow other parts of the system to install routes
with a lower metric.
(From OE-Core rev: 566441f58d398d93f948067cf399d00cf3b37eba)
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the hostname logic the default value is ${MACHINE}, and explain how to
change it.
(From OE-Core rev: f2588c55fb089371f239dde39efe9d63d8614062)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This bbclass will create an SDK with a copy of bitbake and the metadata
and sstate for the target specified for the task. The idea is to let
"system" developers both work on applications and then test adding them
to an image without having to switch between workspaces or having to
download separate items.
Rather than running bitbake directly however, the primary way of running
builds within the extensible SDK is to use the "devtool" command. The
rest of the build system is fixed via locked shared state signatures,
and thus only the recipes you have added get built.
(From OE-Core rev: bf81d6bb7f6df5405b8f2148e2a22e0030c12757)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uninative.bbclass uses -xjf for decompression so actually run the data
through bzip2.
(From OE-Core rev: 84665b4e894a949591d812f1cdc1745a376bf95f)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the buildsystem is copied into the sdk and its toolchain is to
be used, then the relocation provided in toolchain-shar-template.sh
isn't needed and will actually fail.
So break the relocation aspect out and essentially make it another
SDK_POST_INSTALL_COMMAND script.
(From OE-Core rev: 9721378688a05cd8d8443c6ee4be823e5c0688f6)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To add some flexibility to setting up the paths for the toolchain,
add some parameters. This initial use will be in order to point at
the buildsystem toolchain copied in by copy_buildsystem.py.
(From OE-Core rev: 62930ea37cfd5ba787ee85bc8dab23c20a775253)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you create a build directory with poky, or set DISTRO to "poky" and
run bitbake, you'll get a bblayers.conf file with LCONF_VERSION set to
6. If you then set DISTRO to any other value where the new distro config
doesn't pull in poky's config, e.g. "nodistro", you would then get a
bblayers.conf version error which didn't immediately make sense. (The
layer versions have been out-of-step ever since meta-yocto-bsp was
split out of meta-yocto several years ago).
This is just painful and we'd rather users didn't have to deal with
it. Obviously it isn't an OE-Core problem per se, but a simple way to
resolve it for everyone is to bump OE-Core's version to 6 with an
automatic no-op upgrade. Also ensure that multiple upgrade functions
(such as the poky one) have a chance to execute by not breaking out of
the loop as we were before.
Fixes [YOCTO #6139].
(From OE-Core rev: 2fdeee2fad69445b0d97148826c7b027820be63a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit b003df0335.
We keep seeing parallel make failures on the autobuilder
(From OE-Core rev: af46b9f5dd5436b3d48f2fcd7a69f32343b62442)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 7502fa5feb.
We keep seeing parallel make failures in openssl :(
(From OE-Core rev: 9afc85a7be203c5a0eac1977e777a24504cb3088)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Based on Paul Eggletons work to partially upgrade to Python 2.7.6
Modified:
default-versions.inc: switched to python 2.7.9
generate-manifest-2.7.py: fixed _sysconfigdata
python-2.7-manifest.inc: fixed _sysconfigdata
python.inc: Updated checksums and source, no LICENSE
change just updated some dates
python-native_2.7.3 -> python-native_2.7.9 and updated patches
python_2.7.3 -> python_2.7.9, and added ac_cv_file__dev_ptmx=no
ac_cv_file__dev_ptc=no in EXTRA_OECONF to solve python
issue #3754, only needed when cross compiling, also updated patches
use_sysroot_ncurses_instead_of_host.patch: New patch to use ncursesw
from sysroot instead of hosts, introduced by fix for python issue #15268
Rebased:
01-use-proper-tools-for-cross-build.patch
03-fix-tkinter-detection.patch
05-enable-ctypes-cross-build.patch
06-avoid_usr_lib_termcap_path_in_linking.patch
avoid_warning_about_tkinter.patch
builddir.patch
fix_for_using_different_libdir.patch
host_include_contamination.patch
multilib.patch
nohostlibs.patch
search_db_h_in_inc_dirs_and_avoid_warning.patch
Deleted (fixed on upstream):
06-ctypes-libffi-fix-configure.patch
CVE-2013-4073_py27.patch
gcc-4.8-fix-configure-Wformat.patch
json-flaw-fix.patch
posix_close.patch
pypirc-secure.patch
python-2.7.3-CVE-2012-2135.patch
python-2.7.3-CVE-2013-1752-smtplib-fix.patch
python-2.7.3-CVE-2014-1912.patch
python-2.7.3-CVE-2014-7185.patch
python-2.7.3-berkeley-db-5.3.patch
python-fix-build-error-with-Readline-6.3.patch
remove-BOM-insection-code.patch
remove_sqlite_rpath.patch
python2.7.3-nossl3.patch
[YOCTO #7059]
(From OE-Core rev: d4ad95f0d5f08891637c644e85b09da9c4585059)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because we move the workdir when extracting source, then move the source
and delete the temporary workdir, you lose the indirection symlink
pointed to by the alternates file (which is created when the fetcher
clones it from DL_DIR with -s) and the resulting repository is broken.
In any case, for a source repo that the user may put their own changes
into, we can't really rely on a clone made with -s in case the
original goes away - because of cleanall, DL_DIR disappearing, etc. So
repack the repository so that it is a complete, non-shared clone after
unpacking.
(While I'm at it, add a test for devtool modify with a git recipe which
verifies that this works.)
(From OE-Core rev: dccdde4321c48a571677995a4e1dfc583e899cbe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When updating git-based recipes, in a lot of cases what you want is to
push the changes to the repository and update SRCREV rather than to
apply patches within the recipe. Updating SRCREV is now the default
behaviour for recipes that fetch from git, but this can be overridden
in both directions using a new -m/--mode option.
(From OE-Core rev: 654792bb87610ee3569d02a85fa9ec071bf8ab6d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Ensure it knows where to put SRCREV and S
* Handle prepend/append and functions in general
(From OE-Core rev: a770c3764efa857a8b1f0ce4b398277cd483a6af)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to be able to make use of libraries in conjunction with
devtool then we need to install them into the sysroot for other recipes
to use. Make it a configuration option in case it needs to be changed at
runtime.
(From OE-Core rev: 94f517ad8e55edfbe6f06afd963bcfeb849626ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you've added a new recipe, you want the output cleaned when you do
devtool reset, otherwise cruft from building the recipe may remain which
could interfere with future builds.
(From OE-Core rev: 664d1a7fe8f8288fabc582d00f6e36ab29496ec5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add do_shared_workdir which was added recently
* Add do_fetch and do_unpack to this list, because at the moment if you
enable externalsrc through a bbappend the += in this class wipes out
the original value from externalsrc (which is set with ?=)
(From OE-Core rev: 5717e3b60731d2cb9394c13bff049a467c3aeec1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure there's no chance of anyone forgetting they have a recipe set
up for externalsrc; otherwise you could get confused about what is going
on. (With our default logging setup we can't make it a note because the
UI doesn't forward those; otherwise I would have used bb.note().)
(From OE-Core rev: 7b73473bc9d19331a103cf4958059d3ceb84b486)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Here we set SRC_URI to blank, however doing so means that the function
that is called when you expand the default value of SRCPV
(i.e. bb.fetch2.get_srcrev()) will fail, so any recipe that references
SRCPV in PV couldn't previously be used with externalsrc.
(At some point we may fix the function to work in the externalsrc case,
but then we would also need to ensure that ${B} did not change as a
result of PV changing any time the HEAD revision changes in the external
source tree, or you'll lose any intermediate build artifacts.)
(From OE-Core rev: 26f8060c3475ec988194b2163e422ba4e776fd8b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel.bbclass adds ${S} do do_clean[cleandirs], but this means if you
run bitbake -c clean <kernelrecipe> then your external source tree will
be trashed, which could be a disaster. For safety, remove ${S} from
cleandirs for every task. We also have to do the same for ${B} in the
case where EXTERNALSRC_BUILD is set to the same value as EXTERNALSRC.
(From OE-Core rev: b5071fb2667b8751885d38ca62fa36c870177cd5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For recipes that have their actual source in a subdirectory of what is
fetched (e.g. mkelfimage), we need to find the root of the repository
within the GitApplyTree code that attempts to set up the required git
hooks and use that, rather than expecting the root to be the same as
${S}.
(From OE-Core rev: d820303f64ea610338ec11ffd79269e7831d1da9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes:
- BlueZ 5 native HSP (headset) support;
- BlueZ 5 HFP (hands-free) profile support via oFono;
- systemd socket activation support;
- Better support for multichannel and 2.1 profiles;
- Remap optimisations;
- Many minor improvements, bug fixes, and i18n updates.
- Switched to ${BP} variable.
- Patch 0001-configure.ac-Check-only-for-libsystemd-not-libsystem.patch
removed, no longer necessary.
- Patch CVE-2014-3970.patch included upstrem, removed.
- Slightly changed copyright notice, only a clarification.
libsamplerate based resamplers are now deprecated,
because they offer no particular advantage over speex.
Dependency to libsamplerate0 dropped.
[ RB: disable systemd until systemd.bbclass can handle user units ]
(From OE-Core rev: c4de42aadd4c8a4a8f16c25e7dcdefef79daf030)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
