pre-5.25.0 perl by default tries to link to an antiquated libnm (new
math) which is not used anymore since the early 1990's. After 2014
another libnm appeared for NetworkManager causing build failures.
(From OE-Core rev: 97d2ba227044571408151f84cfe611e1a72dd816)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refresh add-geometry-input-when-calibrating.patch to remove
bashism from it.
(From OE-Core rev: c0b8e1ff40af05b29780164c860c68da35e7fc32)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preparation script itself prints out an error on failure, and we
aren't redirecting its output anymore, so we no longer need to print out
a message here when it fails. At the same time, make the message printed
out by the script a little clearer - we're just writing the log out to
the file, we shouldn't give the user an expectation that there will be
extra details in there (other than the output produced by
oe-init-build-env there won't be).
(From OE-Core rev: 80dfaf40e087b34d6360188df372c1c3805a00bd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check a number of things as early as possible in the eSDK installer
script so that the user gets an error up front rather than waiting for
the build system to be extracted and then have the error produced:
* Check for missing utilities specified in SANITY_REQUIRED_UTILITIES
(along with gcc and g++), taking into account that some of these are
satisfied by buildtools which ships as part of the SDK. We use the
newly added capability to list an SDK's contents to allow us to see
exactly which binaries are inside the buildtools installer.
* Check that Python is available (since the buildtools installer's
relocate script is written in Python).
* Check that locale value set by the script is actually available
* Check that the install path is not on NFS
This does duplicate some of the checks in sanity.bbclass but it's
difficult to avoid that given that here they have to be written in shell
and there they are written in Python, as well as the fact that we only
need to run some of the checks here and not all (i.e. the ones that
relate to the host system or install path, and not those that check the
configuration or metadata). Given those issues and the fact that the
amount of code is fairly small I elected to just re-implement the checks
here.
Fixes [YOCTO #8657].
(From OE-Core rev: 6e6999a920b913ad9fdd2751100219c07cd14e54)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a -l command-line option for SDK installers to get a list of files
that will be extracted by the SDK - internally this just runs "tar tv"
on the embedded tarball. This can be used to look at which files the SDK
provides without actually installing it. The initial user of this is the
extensible SDK build process which needs to know what binaries are going
to be installed by the buildtools installer without installing it.
(From OE-Core rev: 1d3e874f191f011eb9d7b0e12e513433c126036e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Determine the name of the current buildtools installer ahead of time,
set it in a variable and use that variable rather than the wildcarded
version everywhere, since it's much tidier.
(From OE-Core rev: d5a601db41ba3c561aced7f5a38689f6b4c9a87c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the buildtools installation failed, we were using a subshell instead
of a compound command and thus the subshell exited but the script
continued on, which is really not what we want to happen. Additionally
log the buildtools installer output to a file and cat it if it fails so
that you can actually see what went wrong, as well as amending the
environment setup script to print a warning as we do when the
preparation fails.
(From OE-Core rev: 8fb8adf309823660c3943df973c216621a71850d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we don't have uninative enabled there's more merging to be done in
the default configuration (SDK_EXT_TYPE = "full" which by default means
SDK_INCLUDE_TOOLCHAIN = "1") and there are likely files that already
exist in the sstate feed we're assembling, so we need to take care to
merge the directory contents rather than just moving the directories
over. Additionally we now only run this if uninative genuinely isn't
enabled (i.e. NATIVELSBSTRING is different to the fixed value of
"universal".)
In the process of fixing this I discovered an unusual behaviour in
os.rename() - when we're merging these feeds we're dealing with
hard-linked sstate artifacts, and whilst os.rename() is supposed to
silently overwrite an existing destination (permissions allowing), if
you have the source and destination as hardlinks to the same file then
the os.rename() call will just silently fail. As a result the code now
just checks if the destination exists and deletes the source if so
(since we know it will be the same file, we don't need to check in this
case.)
(From OE-Core rev: 2b5b920c6b4f4d5c243192aa75beff402fd704d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple of fixes for the recent sstate filtering implemented in OE-Core
revision 4b7b48fcb9b39fccf8222650c2608325df2a4507:
* We shouldn't be deleting the downloads directory here, since it
contains the uninative tarball that we will need
* TMPDIR might not be named "tmp" - in OE-Core the default is tmp-glibc
so use the actual name of TMPDIR here instead.
(From OE-Core rev: 71ecd3bea680ef8c589257844512a14b65e979d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the build in which the eSDK is being built isn't using uninative,
this will have an effect on NATIVELSBSTRING, which will mean that the
eSDK installer won't be able to find any of the native sstate packages.
To keep things simple, under this scenario just disable uninative
temporarily while we run the SDK installer to help us check the presence
of the sstate artifacts we need. Ideally I'd rather not have things like
this that are artificial in this verification step, but on the other
hand this was the least ugly way to solve the problem.
(From OE-Core rev: 9f39deea7c4af5244dbfa824a52e11590a1d4df6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were relying on uninative being enabled in the build in which the
eSDK was being produced, which is not the case for example for OE-Core's
default configuration. Move the code that copies the uninative tarball
and writes the checksum to copy_buildsystem so that it happens early
enough for that part of the configuration to be set up when we do the
filtering (which requires running bitbake).
(From OE-Core rev: 7bc95253098aca2ff195b159b34d9ac041806c75)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the ccache directory as part of do_clean is unnecessarily
conservative and defeats many of the benefits of ccache.
The original justification for this behaviour was to avoid confusion
in the corner case that the ccache directory becomes corrupted.
However the standard approach for dealing with such highly unlikely
corner cases (ie manually removing tmp) would also recover from
corruption of the ccache directories, without the negative impact of
defeating ccache during normal development.
(From OE-Core rev: 6ae6680ad8d51eff756dcb6500fca2530e3e3e73)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch 0015-systemd-user-avoid-using-system-auth.patch
makes PAM session for systemd-user include common-account file
which doesn't contain any session related lines and that breaks
launching "systemd --user" with the error:
Jul 29 13:03:24 intel-corei7-64 systemd[691]: user@0.service: Failed
at step PAM spawning /lib/systemd/systemd: Operation not permitted
This change fixes the patch by including common-session file
instead.
(From OE-Core rev: ecff74ab68ffca27ed856be6117124b8bc1ef2d6)
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some eMMC devices show special sub-devices such as mmcblk0boot0
etc. The installation script currently pick all of them up and
displays it to the user which makes some confusions because these
sub-devices are pretty small and complete installation including
rootfs won't be possible in most cases.
We simply now drop these sub-devices and only present the user
with the root of such mmc devices.
(From OE-Core rev: 4b4d80306de8d8a2e3a2d784890f34e4a0ecfcf0)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If /bin/sh is a regular file (and not a symlink), we assume it's a
reasonable shell and allow it.
(From OE-Core rev: eaa0dc21a5f058a39bd7867bd3cafdb3407abe36)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the path to "ROOT_SYSCONFDIR /mke2fs.conf" has a permission denied problem,
then the get_dirlist() call will return EACCES. But the code in profile_init
will treat that as a fatal error and all executions will fail with:
Couldn't init profile successfully (error: 13).
But the problem should not really be visible for the target package as the path
then will be "/etc/mke2fs.conf", and it is not likely that a user have no
permission to read /etc.
(From OE-Core rev: 9d7c32a88e0670a09e5e1097ff8bca58e9a7943f)
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can take a bit for USB devices to be detected, so if a USB device is
your rootfs and you don't set rootwait you will most likely get a kernel
panic. Fix this by adding rootwait to the kernel command line on
installation.
Fixes [YOCTO #9462].
(From OE-Core rev: 40e2d36573a7a6bce377b1f9653607065ba5ffb6)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds DROPBEAR_RSAKEY_ARGS and DROPBEAR_DSSKEY_ARGS optional
parameters to /etc/default/dropbear. The contents are simply passed to
the 'dropbearkey' program when generating a host key.
The default keysize for RSA is currently 2048 bits. It takes a CortexA9
running at 700MHz between 4 and 10 seconds to calculate a keypair. The
board boots Linux in about a second, but you have to wait for several
seconds because of the keypair generation. This patch allows one to put
the line DROPBEAR_RSAKEY_ARGS="-s 1024" into /etc/default/dropbear, and
have a host key generated in about 0.2 seconds on the same CPU. This is
particulary useful for read-only rootfs systems which generate a key on
each boot.
(From OE-Core rev: c0efbcb47ab37c2d9c298fcd40ecaadd3ca050a7)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When live booting, we need to make sure the running udev processes are killed
to avoid unexepected behavior, we do this just before switching root,
once we do, a new udev process will be spawned from init and will take care
of whatever work was still missing
[YOCTO #9520]
(From OE-Core rev: e88d9e56952414e6214804f9b450c7106d04318d)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default the system will expand the extra os entries for uclibc and musl
even if they are not enabled in the build. There was no way to prevent this
behavior while still getting the expansion for things like x32 or spe.
The change adds a new setting which a distribution creator can override
easily, setting the base set of canadianextraos components. The other
expansions are then based on this setting.
(From OE-Core rev: ea24d69fdf7ebbd7f2d9811cff8a77bffc19a75c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, we get to know the command failed and the exit code but
have no idea how the command failed since we don't get the output by
default.
This makes it much easier to see what went wrong and stand a chance of
fixing it.
(From OE-Core rev: b020b01d41ccaae5d679f1f7950af2e1a1788d39)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the code gives tracebacks if there are no recipes to be built in a
BuildStarted event. Parse the list into a string rather than just taking the
first item. There is nothing special about the first time.
(From OE-Core rev: 684a3d56ef393b56f38d3272f8865f6225a282ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Uninative 1.2 didn't contain the nativesdk locale fix we really needed
to release and update to uninative 1.3 which does contain that fix
and also uses glibc 2.24 final release.
(From OE-Core rev: e0516960925e93f1801620897743b1cebcd806bc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
This allows us to reduce the time that the rpm.lock is held to only the
time needed to hardlink the RPMs, allowing the majority of the rootfs
operation to run in parallel.
Also, this fixes the smart tests by generating an index for all packages
at the time of the test, rather than using the one provided by the
rootfs process.
Original credit for the enhancement should go to Steven Walter
stevenrwalter@gmail.com.
(From OE-Core rev: a92c196449c516fe51786d429078bbb1213bb029)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need/wan't to run resize on an ssh connection. It's useless and
it breaks the Eclipse SSH debug connection. So, we added a check.
YOCTO #9362
(From OE-Core rev: 655778769f50d3aff74d7a436d28ac31b6aebb11)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This effectively reverts the commit
3dd233ac0c80393824100c54bb525236f8290fd2
gold now emits errors on copy relocs against
protected symbols what ld.bfd did in past, however
it seems its too conservative.
This does not fix the case for folks who
use gold as default linker, however it
does make bintuls 2.27 work with default
configuration of OE
(From OE-Core rev: 0092a076adb11cac411c86389af84bb96169730f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
with binutils 2.27, mips has got the gold support
but it doesnt work for webkitgtk _yet_ therefore
disable it for now.
(From OE-Core rev: 3f8543f31c230a89a54cc43c1d38263a58141699)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upstreamable include fixes have been sent upstream. The patch set adds
AC_USE_SYSTEM_EXTENSIONS so we don't need to explictly define _GNU_SOURCE
anymore.
(From OE-Core rev: 6582e066fd9f9d4880e84cccbcdbb68606389309)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With binutils 2.27 on at least MIPS, connmand will crash on startup. This
appears to be due to the symbol visibilty scripts hiding symbols that stdio
looks up at runtime, resulting in it segfaulting.
This certainly appears to be a bug in binutils 2.27 although the problem has
been known about for some time:
https://sourceware.org/bugzilla/show_bug.cgi?id=17908
As the version scripts are only used to hide symbols from plugins we can safely
remove the scripts to work around the problem until binutils is fixed.
(From OE-Core rev: 0194531627735c1f5643ff1bd1bca27ca05c8e95)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now Runner's support extra_bootargs for the kernel so add
extra_bootparams to the start() methods to avoid exception.
(From OE-Core rev: 4c28c03a2322fbcb9a5c268b08eaeb71d940ee04)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using non-tty consoles (e.g. VirtIO console /dev/hvc0) the
current init system fails with:
process '/sbin/getty 115200 hvc0' (pid 545) exited. Scheduling for restart.
can't open /dev/ttyhvc0: No such file or directory
The first field needs to be a valid device. The BusyBox inittab example
explains as follows:
"<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is."
(From OE-Core rev: a53393082f331a613cb3eb973a07bab22cefcde8)
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prior to running oe_runmake make sure $B is the cwd. This is required
due to bitbake commit 67a7b8b021badc17d8fdf447c250e79d291e75f7
"build: don't use $B as the default cwd for functions".
Without this change, do_concat_dtb fails with:
| ERROR: oe_runmake failed
| make: *** No targets specified and no makefile found. Stop.
(From OE-Core rev: 6dca3dee34b587157d0d49c590a177ff1dabb374)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle u-boot.rom signing (U-Boot as x86 BIOS replacement) the same way
that u-boot.img signing is handled.
(From OE-Core rev: 94e3f427bbeb005d8443e9d822c3182f280df470)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If INITRAMFS_IMAGE is set, build an additional fitImage containing the
initramfs. Copy the additional fitImage and the source (*.its) file, used
to create it to DEPLOYDIR. The fitImage containing the initramfs must be
built before do_deploy and after do_install to avoid circular dependencies.
UBOOT_RD_LOADADDRESS - Specifies the load address used by u-boot for the
initramfs.
UBOOT_RD_ENTRYPOINT - Specifies the entry point used by u-boot for the
initramfs.
(From OE-Core rev: b406a89935f148779569fa3770776e009dd51f13)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prior to assembling the fitimage, ensure that $B is the cwd due to
bitbake commit 67a7b8b021badc17d8fdf447c250e79d291e75f7 "build: don't
use $B as the default cwd for functions".
Without this change, do_assemble_fitimage() fails like:
Log data follows:
| DEBUG: Executing shell function do_assemble_fitimage
| arm-ka-linux-gnueabi-objcopy: 'vmlinux': No such file
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_assemble_fitimage
(From OE-Core rev: 42d50e8f5f3a98e50a0f50473ebc83dc6347b634)
Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix multilib + rpm since its multilib package name is special.
* Update SSTATE_DUPWHITELIST to avoid shared location conflicted error.
* Fix message when "not copying", now the messages are:
Copying packages for recipe <foo>
Not copying packages for recipe <foo>
(From OE-Core rev: 647fc7913c3d1f98efe36f01fd4e0edf2366e1a6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a non-functional change, which intends to correct element
names of a tuple returned by Popen.communicate().
Both in python2 and python3 subprocess.Popen.communicate() method
returns a tuple (stdoutdata, stderrdata), thus old assignments and
collateral comments are incorrect from human's point of view, however
formally there is no error in the code.
The change is desired to have to avoid copy-paste errors in future.
(From OE-Core rev: cdd9bae381deb15ac84e11a39f9d72f2757c1583)
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a non-functional change, which intends to correct element
names of a tuple returned by Popen.communicate().
Both in python2 and python3 subprocess.Popen.communicate() method
returns a tuple (stdoutdata, stderrdata), thus old assignments and
collateral comments are incorrect from human's point of view, however
formally there is no error in the code.
The change is desired to have to avoid copy-paste errors in future.
(From OE-Core rev: f8c21df86bae5a85e221b69b91b347aeba6be4c3)
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
