The list in the "Configuring the Neon Eclipse Yocto Plug-In
section should be an ordered list and not a bulleted list.
(From yocto-docs rev: 9e616582ee27d0bb976427d21d54b023f83eff56)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided similar wordings in places in this section as were provided
in the parallel "oxygen" section.
(From yocto-docs rev: 956ee839f05d6608c315899c4444d125db338ef7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to consolidate a couple steps here. When you add in the
location for the YP Plug-in, it auto-populates the options.
Updated the prose to reflect that.
(From yocto-docs rev: 3d621a1fe552c6133517256c21efdfe4cacfe6ed)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Configuring the Neon Eclipse IDE" section needed a bit more
information in the note. Telling the users that if some options
are already installed they will not appear in the list.
(From yocto-docs rev: 09b3252aaf49574e669b67e3ff00dceab89b40f5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Steps indicated you had to be in a clean directory to unpack the
tarball. This is false. You can be in any directory and unpack the
file. Unpacking it puts all the files into a directory named
"eclipse".
(From yocto-docs rev: 426aa18db25dbc275674a8aef26ede586a79ed3f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed this step to be more accurate.
(From yocto-docs rev: 9df184b4ed7e8a7fa5849624911b810129c099a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link was pointing to the Chapter 5 as if it were in a different
manual. The link worked but should have been pointing to the actual
section of the Eclipse flow overview. Fixed it.
(From yocto-docs rev: c60bc694a5b25fd2a9df5a10691ba301d39c5f16)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The step describes the installation process and the intial launch
process. No information exists for describing how you launch
Oxygen from outside the install process. I added a note that
tells where the "eclipse" binary is installed and an example
line to invoke it.
(From yocto-docs rev: 6e3dbc9e123394d311da234e4457b9a6c253ff0d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided better instructions and accounted for the fact that it
is just this workflow here that is assuming the need for a
YP-built image.
(From yocto-docs rev: edba9e07d7029e9276ebfd288448f4849ff3aed4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the "Workflow Using Eclipse" section head to not match so
closely the "Working With Eclipse" section heading. TOC appeared
funny.
Also, updated the step 1 to be more accurate regarding the real
need of having a YP build host and where to go to get information
on setting it up.
(From yocto-docs rev: 4951b3f492c24724f1169068ee3593ad93b0c48a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found several items that were slightly off after working through the
procedure. Updates to bring it into line with reality.
(From yocto-docs rev: bc024c4484db3fdfb44fdb6f8709ad47378d85e2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Expanded this section to contain a figure of the flow and an
example that showcases the ways to override and use SDK
environment and Makefile variables.
(From yocto-docs rev: 422b5dda50c47d03adf2a8c4e8cfdb02eddff0ca)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Makefile-Based Projects section was expanded to add a useful
example and figure. Added this figure to the sdk-manual and
mega-manual figures folders.
Updated the Makefile to include the new figure as part of the
tar files for each manual.
(From yocto-docs rev: 5bf979f924200a31cb28fe9920b0877d5562e0f5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Autotools is simpler now as it uses "autoreconf" to one-step a bunch
of the existing tools such as aclocal and autoconf. I updated the
figure to reflect the simpler flow and also the steps that accompany
the figure.
(From yocto-docs rev: 232f80b4723c1a51ed0d0e55c00b13e64390d69a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I wrote the section to include a flow diagram using "make" and
provided a working example highlighting how to override environment
variables.
(From yocto-docs rev: c147d1ee1f6f33a5222eb1ccf466d1854c67815c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two changes here. One was a note to the "make" step of the
Autotools-based section. I cross-referenced the Makefile section
for information on how SDK installation environment variables
are respected and or overridden when using make variables.
Also, fixed the quotation syntax of the four environment variable
examples used in the "Makefile-Based Projects" section.
(From yocto-docs rev: a5742a8730359ed28f10108cb741913472337c57)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New figure for the section on Autotools workflow. The figure
goes in the folders for both the sdk-manual and the
mega-manual.
Updated the Makefile to include the new figure in the tarball
when creating both manuals.
(From yocto-docs rev: 01f33f7ee293de4dbe0398aae6c087de686be965)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did a re-write of this section with better explanations.
I also pulled the bit about passing parameters to the
configure script into the step that talks about that.
(From yocto-docs rev: 778e566100450cce15808f80ace2b92f811001a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The line used to be "AC_PROG_INSTALL". I did some digging and can't
really figure out why the example is not following the standard
"helloworld" stuff out there all over the internet. So, I have the
user create a configure.in file as follows now:
AC_INIT(hello,0.1)
AM_INIT_AUTOMAKE([foreign])
AC_PROG_CC
AC_CONFIG_FILES(makefile)
AC_OUTPUT
The original was as follows:
AC_INIT(HELLO,0.1)
AM_INIT_AUTOMAKE([foreign])
AC_PROG_CC
AC_PROG_INSTALL
AC_OUTPUT(Makefile)
(From yocto-docs rev: 21eac500384aaea577ce90098c835cd140517941)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link was going to a spot from which another link was suggested.
Too many redirections for the reader. Linked to the original place
instead.
(From yocto-docs rev: 9983cecb37f179a8eef28ab20a6539f8af100978)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Formatting used for the "configure" script created using the
"autoconf" command in the example.
(From yocto-docs rev: 6c57cd80acc0d5fa5f75a4b6341bc2521ceb43b5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Autotools example called for a "configure.in" file as part
of the "hello-world" example. When working through the example,
a warning occurs saying that the file needs to be "configure.ac".
I changed the example.
(From yocto-docs rev: f2ec3e564f828ad79f778d47862b4b422ad5a147)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to reference a couple terms for first use: "cross-development
toolchain" and "OpenEmbedded build system".
(From yocto-docs rev: a0058122b00833bad84af007dfe466e9a2f6434b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the output to reflect the real command's output. Updated
prose to match (mostly) that used in the similar extensible SDK
sections.
(From yocto-docs rev: dd929244162eaf00f5e552ea8a96a7c2a89daa9f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some poor writing in this section.
(From yocto-docs rev: ed59c0e30d6c093f0dda54c0d61a2863a7e826e0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a grammar error and made a few other corrections.
(From yocto-docs rev: 22c2f0643975b620fb543b651eae7c510b141770)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a cross-reference to the term "build host". Corrected
a subject/verb grammar error.
(From yocto-docs rev: 4f5c3a49555601d8a20da1b629a46bde03866e78)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was poorly organized with a mile long sentence as
the opener. Fixed it.
(From yocto-docs rev: c2496c7aebc056395b7a796501cf6cd5f6519fff)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a few sentences up by providing clearer text.
(From yocto-docs rev: 64af3ec2c380d73dc863b2aea7878544b472218d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a cross-reference link to the term "bulid host" and removed
the redundant word "system".
(From yocto-docs rev: 258086ab4af3739a845d6031e5875c13084e7eb0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some prose in various places.
(From yocto-docs rev: f368408a3764ad9248478383236261066772f0b6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates to prose for better understanding.
(From yocto-docs rev: 5c4384d4311d8fbedad0eb9ebb77427a1dbbbdcf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated various prose for better understanding.
(From yocto-docs rev: 13d5330dc5de232311fbb43d5041d0f7f11de6c0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poor writing left over in here. Updated some of the prose.
(From yocto-docs rev: 9812ce3f1b6a4931a1b8b634a6d1f69c0e96c957)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrected some prose to be clearer.
(From yocto-docs rev: 9ab0ef0c00792f07f3b45466baeafe30199f048f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Took out the $TMPDIR part for the output and left more generically
as "Build Output".
(From yocto-docs rev: 90b3c468dbea19c87340bd234ffe1b263ffa1e4f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail at the top for how the local recipe interacts
with the Upstream Source.
(From yocto-docs rev: fea704bc485c53bf27ce43f5d1d491bf652ddc9c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits from the read-through.
(From yocto-docs rev: ee25d5a607591823401b6c7e8b9b7dccf707f996)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail on how the upstream source or files from
srctree are located.
(From yocto-docs rev: 11c4679ee91afbb96a7ea82f6e32c90b5e3a0d66)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the figure to use "Upstream Source" labels and
fix a wrong "devtool edit-recipe" command. That new figure went into
both figures folders for the sdk-manual and mega-manual areas.
Provideds some cleaner wording.
(From yocto-docs rev: b55ccf14a9a4b8948a920f0942da1fdda93b2e9e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the way we handle the list of exported variables resulting
from running the *.sh installation script. Rather than list them
all out (they were getting to be quite numerous), I am referencing a
few as examples and recommending the user look at the actual *.sh file
if they would like to examine the entire list.
(From yocto-docs rev: fa60c255a12bd3dd79da4a77c3150937eeb4e201)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
