This recipe depend on virtual/libgl, whose providers require the opengl distro
feature.
(From OE-Core rev: 009c088f6d0bf75ebb17825f6a3aba356a5b659d)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With enabled SSTATE_MIRRORS sstate code expects mirrors to
contain entries for all tasks, which is not the case for ext
installer as it uses reduced sstate cache.
Added do_package tasks to BB_SETSCENE_ENFORCE_WHITELIST to prevent
installer failing with ERROR: Sstate artifact unavailable
[YOCTO #10832]
(From OE-Core rev: 2ed46ada4b8e496493835e84b36f7e9c367f59d2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mapped uninative sstate directories to make ext SDK installer to
use them when it's run on systems with gcc version different from
gcc version used to build installer.
[YOCTO #10832]
(From OE-Core rev: 549df5f82c9b2d4feb6f459cb3b2f240efb9a981)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Requiring all build systems for external kernel modules to
place Module.symvers directly into ${B}/. is quite an
artificial assumption/requirement. It doesn't have to end
up there, but could easily end up somewhere below ${B}.
Allow to override the location below ${B}
Note that we still don't make use of multiple
Module.symvers in case there are any generated by one
single kernel module build, but this is no change in
behaviour from before and could be added if there really
is a demand for that.
Reported-by: Denys Dmytriyenko <denis@denix.org>
(From OE-Core rev: caa0fa2ddf0c97255b38b1ec8579944ab4821ff1)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refreshed the following patch:
* inet-6-.defn-fix-inverted-checks-for-loopback.patch
(From OE-Core rev: 1daa09aa82c528dcc7682553dd6704a93aafdc88)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove 0002-Recognize-nios2-as-compilation-target.patch which is already
in the source.
(From OE-Core rev: a2b7f442d8872afe8edec062c60264b31e860218)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed install.patch since it is already in the patch.
* Fix indent for file://test.sh
(From OE-Core rev: bd8b1d79b50819486e5882db05abb6b358b7392a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TOOLCHAIN_TARGET_TASK doesn't need to explicitly list sdk-target-dbg because if
SDKIMAGE_FEATURES contains dbg-pkgs (as it does by default) then they'll all be
installed anyway. This means that if the user removes dbg-pkgs from
SDKIMAGE_FEATURES then the SDK correctly doesn't have debug packages in.
[ YOCTO #9078 ]
(From OE-Core rev: 4c711830ae26008f73bbf557964bdb86b8c922da)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've moved to python3, we don't need this compatibility code which just makes
the code less readable.
(From OE-Core rev: 425afe2484707640ac71194885fdb263e95e9950)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nativesdk-libgcc doesn't need a symlink into the target space and if we do this
sstate installation of the recipe can fail depending on whether it races with
the cross-canadian toolchains.
(From OE-Core rev: b2c1e1fe4221862e0dbf5d08960f0d0228e47c72)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
People are strugling with multiconfig as the up front inclusion of the
configuration file doesn't do what people expect. The only way to meet
user expectations is to include the file immediately after local.conf.
We add BB_CURRENT_MC to bitbake so that the metadata can determine when
to include the extra configuration.
(From OE-Core rev: a6a3894fb2cb2097d2404b8b8cb2b85df595cfa9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means that a user can change TMPDIR in a multiconfig situation
and still only have one path to the uninative setup. Without this change
its not possile to make such a setup work.
(From OE-Core rev: 779422c5458f5f643b3a4a0dedaa4d9ad709367a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to be able to use -fstack-protector then you need the
runtime support - you can either write this yourself or use libssp
supplied with GCC. If you're using GCC then it seems likely that you'd
just be using libssp, so include in the SDK by default; however use
RRECOMMENDS just in case it's been disabled or you aren't using GCC.
(From OE-Core rev: 6c990655e35bb3a14d59555662ec5802c9980028)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rm: can't remove '/etc/resolv.conf': Read-only file system
ln: /etc/resolv.conf: File exists
/etc/default/volatiles contains an entry:
l root root 0644 /etc/resolv.conf /var/run/resolv.conf
which causes populate-volatile.sh to execute the following in link_file():
if [ -L \"$2\" ]; then
[ \"\$(readlink -f \"$2\")\" != \"\$(readlink -f \"$1\")\" ] && { rm -f \"$2\"; ln -sf \"$1\" \"$2\"; };
elif [ -d \"$2\" ]; then
...
At the time the image is created, /etc/resolv.conf is already a
symlink to /var/run/resolv.conf, but at boot time when
populate-volatiles.sh is run, /var/run/resolv.conf doesn't
exist, causing it to try to rm -f and ln -sf which of course
fails due to the read-only filesystem.
[YOCTO #10814]
(From OE-Core rev: 765ee275f5499254b1f09e394c757072bea5f459)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The glew 2.0.0 release added support for building for EGL:
http://glew.sourceforge.net/log.html
Add PACKAGECONFIG options for 'opengl' (ie the previous default, with
dependencies on opengl and X11) and 'egl-gles2', which depends on EGL
and GLESv2 and allow glew to be built for non-X11 distros.
(From OE-Core rev: f6344f20e3aed640b3218438e69c0b641e58d630)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous WIC script selftest didn't cover all of its command line
options. Some option variants were included in existing test cases and
the following tests were added to complete covering them:
1552 Test wic --version
1553 Test wic help create
1554 Test wic help list
1555 Test wic list images
1556 Test wic list source-plugins
1557 Test wic listed images help
1558 Test debug
1563 Test skip build check
1564 Test build rootfs
1559 Test image vars directory selection
1562 Test alternate output directory
(From OE-Core rev: b4d52c3f1e0ad2c14028ff08c0938d1b24b7f648)
Signed-off-by: Jair Gonzalez <jair.de.jesus.gonzalez.plascencia@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following test cases were assigned an ID number on Testopia:
1496 Test generation of .bmap file
1560 Test creation of systemd-bootdisk image
1561 Test creation of sdimage-bootpart image
(From OE-Core rev: b53e432206eaba7c6c67e4689c25b5e62d7ee9b2)
Signed-off-by: Jair Gonzalez <jair.de.jesus.gonzalez.plascencia@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing a kernel package, the symlinks created by
update-alternatives should point to a path relative to KERNEL_IMAGEDEST
and not an absolute path to '/boot'.
Failing to do so causes problems when resolving the symlink inside some
bootloaders which mount the boot partition elsewhere.
(From OE-Core rev: c7bc46b9bc29dd0953ab8d63b50fa105bb66892e)
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If commands are run asynchronously they may be completed out of
order causing problems if later entries depend on earlier ones.
(From OE-Core rev: bead9e59768209dd70f9cba51d2f1e5925cc284d)
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tests may need to run a native tool that is not available on the host
filesystem, but can be built using one of the *-native recipes. In such case,
the tool will be available in native sysroot, and running in from that location
will require adjustments to PATH.
runCmd() can now take a path to native sysroot as one of its arguments and
setup PATH accordingly.
(From OE-Core rev: f2a04631949db72d4261d1c142c5044fad3741f9)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when using clang, configure it poking at build host
if we do not use it then it falls back to sysroot
which is what we need here.
(From OE-Core rev: ee0b0da237c1661f43e27e26e0ab24b7d8ed174f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable asm to fix
| You specified a pre-MSA CPU in your CFLAGS.
| If you really want to run on such a CPU, configure with --disable-asm.
(From OE-Core rev: 302124c1cc8353f4d0e13ab9ba9057d6b3862bde)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When subversion run on x86 and lib32 on x86-64, it use the APR's
apr.h header file. But when configure the APR, APR meets the cross
compiling, it was hardcoded in configure.in in apr source code. As
the following:
APR_CHECK_SIZEOF_EXTENDED([#include <sys/types.h>], off_t, 8)
It pass 8 bytes to off_t when meets cross compiling, but on x86 or lib32
the off_t in glibc was 4 bytes, so it let the application who use apr.h
go to wrong.
Such as subversion:
svnadmin create test
So we should let the APR detect the correct off_t when cross compiling,
change it to the following:
AC_CHECK_SIZEOF(off_t)
The same for the following hardcoded types for cross compiling:
pid_t 8
size_t 8
ssize_t 8
Change the above correspondingly.
(From OE-Core rev: e18820ca9202c07e2406d702c46f45415182b7a6)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit cfe6f3e251.
This is because the apr configure wrong, when the apr configure meets the
cross compiling, it pass 8 bytes to "off_t", in apr source code configure.in,
it was hardcoded:
APR_CHECK_SIZEOF_EXTENDED([#include <sys/types.h>], off_t, 8)
The macro "APR_CHECK_SIZEOF_EXTENDED" was defined in build/apr_common.m4,
it use the "AC_TRY_RUN" macro, this macro let the off_t to 8, when cross
compiling enable.
But in glibc on the x86 or multilib target the "off_t" was 4 bytes, so this
cases dismatch for softwares which use the apr.h, such as subversion, run this:
svnadmin create test
It failed because the "APR_OFF_T_FMT" was "lld" in apr.h when apr configure,
but the "apr_off_t" was 4 bytes, in the apr source code: apr_snprintf.c
i_quad = va_arg(ap, apr_int64_t);
When the function apr_vformatter meets "lld", it would use the above to parse,
but the above read 8 bytes, so the follow-up data go to wrong.
So we should configure the apr correct when cross compiling. I do this on the
following patchs.
(From OE-Core rev: fbdfb39c011676fe61a4d58b62226126e0e9ec62)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
latest systemd has changed the resolved defaults which points to
127.0.0.53 port 53 on local network. If someone wants to use
host-local IP address then it can be pointed to copy in /lib/systemd
(From OE-Core rev: 99d1199fd0961f94732a1a533d66472ca17cf6f5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 68cb3180c1b0dcee50812b21f98850d188d8621b as this wasn't
ready for merge and there are new better versions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was bug with alignment frags for aarch64 in binutils. This is fixed in
master of binutils. This patch backports the fix to binutils 2.27 version.
(From OE-Core rev: f6f87019073d4f3caa7766aca89faa6781690fba)
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git module is not included into standard Python
library and therefore causes import errors on the systems
where PythonGit is not installed.
As git module only used in the code implementing --repository
functionality it's better to import git only in the scope
that requires it.
[YOCTO #10821]
(From OE-Core rev: 66be32c1a075201d6ee0e9b9e10b84e6a2ace745)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New binary gdk-pixbuf-thumbnailer packaged in ${PN}-bin.
(From OE-Core rev: 2103089819dd2df27753b4d04789680a26580848)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
