Changes throughout the manual that either eliminate or change
many of the "Yocto Project" strings. The file structure for
the meta data is now called "source directory." The build
directory is referred as just that - "build directory." Any
where the build system is referred to it is called the
"OpenEmbedded build system."
(From yocto-docs rev: 1210c19f90d4a52042fec12657212ae3e58e13d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new FAQ entry on how to get rid of build output and
start over. Sourced by Robert P. J. Day.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3b94911aaf64b9618f8dbc0d8b98384b9ebd33b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have cleaned up a bit of the FAQ entry for how to use an
external toolchain. This is not complete yet.
(From yocto-docs rev: 030324a6881d8b9b0bcf476a2b7bfdd6fbd978a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example did not specify to switch to the "denzil" branch after
establishing the local repo of poky-extras. The example will not
work without this step.
(From yocto-docs rev: 90071570bca2edfceb4adb91bdd9093c095c8825)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note to warn the user about mixing ADT Intaller installation
methods.
(From yocto-docs rev: 718a48a7ea4753eb1e59e17a75c3d94a9ed166bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous renditions of the term "Build Appliance" referred to the
VMware system. However, it was determined that the term
"Build Appliance" should really refer to the actual image that
can be booted and run on the VMware applications. I have updated
the areas affected by this change. The change assumes the name of
the built or downloaded file you boot will be named
"build-appliance-image."
Fixes [YOCTO_#2656]
(From yocto-docs rev: 6b27b7d92b9722351eb43a7c2a341ce3af056dba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dialogue for the Yocto Project Settings is now "Yocto Project
Settings" instead of "Project Yocto Settings." Updated the manual.
(From yocto-docs rev: 980b4d22dab4ac681c6dc1a85e78306213799062)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The selection "Yocto ADT Project" has changed to "Yocto Project ADT
Project."
(From yocto-docs rev: aa61cd4f93e08373ef430926c008da9f28f72ff8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that describes how to generate the cross-toolchain into the
Yocto build tree erroneously referred to this process as installing the
toolchain. Furthermore, it actually mentioned the creation of a
toolchain tarball, which is wrong. I updated the section to more properly
refer to this procedure as generating the toolchain. I also removed the
bit about the tarball creation.
(From yocto-docs rev: 5ae8faa651ed6bf22c5475a4eacb5c758c62cea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The item to click in the step to configure the Eclipse Yocto Plug-in
changed from "Yocto ADT" to "Yocto Project ADT."
(From yocto-docs rev: fc860fe497be6da189e8e48f9546b105b9ff0075)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is important that the environment uses a host gcc when running the
adt installer. I put some text in noting that.
(From yocto-docs rev: 7f63662913d6d79843e1bdcadc49bb120bb72688)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sections describing how to debug remotely and how to use the
oprifiler have been deleted. these sections are now in the YP
Development Manual.
(From yocto-docs rev: 5f277a38a7afe1cc06eafe2ef1b07cc24c8ec546)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the sections on remote debugging and using the profile out of
the YP Reference Manual and into the YP Development Manual. These are
now two sections in the "Common Tasks" chapter.
(From yocto-docs rev: 42640bf69aa05c56eb112c10b6d7b96069173785)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "Development Using Yocto Project Directly" section.
This information is better covered in the YP Development Manual
where it talks about modifying temporary source code.
(From yocto-docs rev: f3c8c182a8b34c8fdfe4be8c497948f8b777ddf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Modifying Temporary Source Code" that was in the chapter
for "Common Tasks" was moved to the "Common Development Models" chapter.
After discussion with Darren Hart, modifying temporary source code
is a valid develop model. So, rather than isolate it in the common
tasks chapter it has been placed in the development model chapter,
which now has four types of development.
Changes were made to update the introductory text of all the concerned
areas of the manual.
(From yocto-docs rev: 8b07ee3bcda9c13e576b54b0079b0656cd8fcc32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "External Development Using the Eclipse Plug-In" is
redundant. We have an entire chapter in the YP ADT manual for
this information. The section has been removed.
(From yocto-docs rev: fa9d4785032aada0a52acd1cec083d00dc4ac21b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "External Development Using the Meta-Toolchain" was removed.
The information in this section is better presented in the ADT manual
and in the YP Development manual.
(From yocto-docs rev: 2488d6ac9872b00a8887a12a6c77aa16d30ad5e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three cross-references to the section "External Development
Using the Meta-Toolchain" were removed. This section is going
away in the YP Reference Manual. There is no replacement section
that makes sense so the cross-reference is removed.
(From yocto-docs rev: 97ed489c335d6d2782cc3ed684fce92c78b4fec8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a small review comment to the section based on reviewer
feedback.
(From yocto-docs rev: 68cc2bac8dca78572d197af326452bbd37c947f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Using Pre-Built Binaries and QUME" section needed to incorporate
some information from the YP Reference Manual. I have merged those
changes in and did some re-writing to blend it well.
(From yocto-docs rev: 5c20f00f9ec75c19fd0106c9f241751381ba7e3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the section about developing binaries using QEMU. This section
is better placed in the YP Development Manual.
(From yocto-docs rev: 83a4e84b69051f217993d80b525e9d07d64d1c6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inserted a note warning the developer that it is their responsibility
to understand and meet all licensing requirements if they are going
to be including images as part of a BSP.
(From yocto-docs rev: b8154904be02a4185bf417f193eb125b8470bc8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented review feedback from Dave Stewart and Tom Zanussi.
(From yocto-docs rev: 5ed73c29b6a46737a009a38b294bdd61e4c63d85)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "Requirements and Recommendations for Released BSPs"
section. This section was requested by Dave Stewart based on
community input for direction on how to create a BSP that was
compliant with the Yocto Project. The input for the section came
from Tom Zanussi.
A spell-check was performed also prior to this commit that addressed
a few spelling issues across the file.
(From yocto-docs rev: 7ed0dd1093b33491231dec06f7b5f8e76004130d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the "Show a Particular Feature or Branch Change" section so
that it reads better. I also included some real examples.
(From yocto-docs rev: 42aa13c7fbf45abf869b056deec063be6682c70b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to Bruce Ashfield, we will be using linux-yocto-3.4. So
I changed the linux-yocto-3.0 strings to linux-yocto-3.4.
(From yocto-docs rev: 23df0251b04ed7c31ad2297a4a7870861554beef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a note to include information about what happens if you do a
kernel build and have your machine compatible with every possible
kernel. This extra information is useful for rational.
Reported-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From yocto-docs rev: e631ec44be49d456add6a53ff3db89016d187370)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example showing how to use pre-built images, the toolchain, and
filesystem was off a bit. I changed some wording to indicate using the
.ext3 filetype of the filesystem. Previously it talked about expanding
the tarball version but the example has been changed to use .ext3.
Also, the environment setup file has been mis-named forever. It should
have i586 in it and not i686. And, finally, the image name does not
have a release number as part of the name.
(From yocto-docs rev: c9953c9bb716ae5be183020c5143152226bf1de5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto_3.2.bbappend example was out of date. There is no
longer a kernel features statement in the last part of the section.
Only COMPATIBLE_MACHINE, KMACHINE, and KBRANCH remain. I removed
the fourth one from the text description and the example code.
(From yocto-docs rev: 1a6d3cad48f1b52e5b029434ce655940c6024694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note telling the user that the commit ID strings in the
example might not match the actual commit ID strings found in
the .bbappend file.
(From yocto-docs rev: 5cb845361c8ce8b60dcafc28d1bc01d54badd67a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2459]
I provided better definitions to the -dev and -sdk image types.
They now call out host development and target development.
(From yocto-docs rev: bd2c0db27d7eb038931550a96752f961ea6b1d9c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description had reference to a toolchain, which is evidently not
true. I have re-worded the description so that it does not mention
inclusion of the toolchain.
Reported-by: Wolfgang Denk <wd@denx.de>
(From yocto-docs rev: 5a918d7d20133b85badd082c81cfe4af18709316)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2445]
Added a note telling the user not to install Eclipse from the distribution's
package repository but to rather be sure to install from the official
Eclipse download site.
Also, changed the tarball name from having a "3.7.1" in it to the
recent version of "3.7.2".
Reported-by: Lianhao Lu <lianhao.lu@intel.com>
(From yocto-docs rev: f50d0071e39a5e8424633a55ab2c3fdc75e9686d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug (2256) the example that changes the kernel configuration
through menuconfig did not work. I have re-written the section
to now start with the default behavior of CONFIG_SMP=y and then
have the user change the configuration to where it is not set.
The changes include the reversing of the flow and the work-around
needed due to bug 2256.
(From yocto-docs rev: 6fa9eee12ed83f81470beb9792fb4fc1c5104f69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added entries for the Manual History table for upcoming 1.3 docs.
(From yocto-docs rev: 430b384035593cd05c4f286e20c01f0fe72da8ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To publish manuals for the "latest" set of docs, some variables
need changed. DISTRO is 1.3, DSTRO_NAME is 1.2+snapshot, and
POKYVERSION is 8.0.
(From yocto-docs rev: e5a21791b4e588631910f102b660c1709ab7a0f4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove mercurial as this is no longer needed.
linuxdoc-tools was mentioned twice in the CentOS list.
We no longer support Fedora versions older than 15 so remove this note.
This commit applies to 1.2, 1.2.1, and 1.3.
(From yocto-docs rev: 4a7e8cc3d69d5c2f9aacedc5f7e2ff9657ef850f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered a bug when publishing documents. There are two scp
commands that copy a document's files and figures to the appropriate
directory in the srifenbark@yocto-www:~/www.yoctoproject.or-docs
server where the manuals are published. The second scp command
had a "/figures" at the end. This was causing a new "figures"
directory to be created within the "figures" directory. This
redundancy shows up as missing figures in the manuals if a new figure
or changed figure is ever added to the book after initial
publishing. I removed the extra "/figures" at the end of the scp
command.
(From yocto-docs rev: cef3634e695f61bfb8465f1fb7a88e4e8a9a00f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
