The Navit recipe can depend on fribidi which is now part of oe-core. Since the
pkgconfig lookup is based on pkgdata the results can change depending on what
has been built, which leads to occasional failures.
Build gtk+ before the test to ensure that the pkgdata is populated with more of
the dependencies, and add fribidi to the generated DEPENDS checklist.
(From OE-Core rev: d180dc758710c7259d45eeb9304e7284a8fd8825)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, we see errors if gpg is missing from the host system
for "oe-selftest -r runtime_test.TestImage.test_testimage_dnf".
(From OE-Core rev: e91838b63b506e2969582b2b8511fd3724d6aa3f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BPF Linux ELF objects are generated with kernel-selftests with
>= 4.18 kernel and when clang is enabled which packages BPF objects
into packages, therefore recongnise this as a valid ELF target
Add a selftest for BPF
Do not flag BPF objects in target, since they pretty much will be ok for
most of kernels architectures we care do support BPF
(From OE-Core rev: 3667a8ec016bae3f8026ef7b4c895546804f6368)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
allarch is disabled when multilib is used, so sstate oeqa case
test_sstate_allarch_samesigs_multilib is useless. Remove check for
allarch part and rename to test_sstate_nativesdk_samesigs_multilib.
(From OE-Core rev: 32fe47ea0aea791357d3045c202cdad86b16f2ff)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can be used to simplify code like:
"${@['iffalse', 'iftrue'][var]}"
(From OE-Core rev: fc5a5af7bc3619f575988a75efc0c4fe15478b2d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running 'gcc --version' for every image recipe is slow and increases parsing
time/resource usage for no good reason. Only compute the value in when we're
really running the task/function.
(From OE-Core rev: bf49316bb9913b7c89de64d6a194be31aa66e16b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It fails to run rpmbuild to build a noarch package on target when it
contains 'BuildArch: noarch' in the spec file:
| error: No compatible architectures found for build
Add 'noarch' to buildarch_compat in configure file rpmrc to fix it.
(From OE-Core rev: 2bdddb458bcc779d595e972f60a719aeb1c1b6d5)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test installs socat and expects it to run but assumes all its dependencies
are already installed (which includes libssl).
Recent changes mean this isn't the case so force libssl into the image in advance
to work around this issue for now.
(From OE-Core rev: 13b82380abb273e6575b1e74870d3fe8249ebbc1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During debugging dnf issue, we found that the test_dnf_install
PASSED the testing even though the environment does not allow
dnf install to run successfully. Further debugging had identified
that current test_dnf_install will execute dnf install even when
the package to be installed already exist, thus dnf install
will just skipped and this test will PASSED even though it was
not.
To solve this, added additional logic to check if the package
to be installed already exist, if yes then remove the package
before actually run dnf install. This will make sure dnf install
was tested as expected.
(From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current _hasPackage does a regex match when checking for the
existence of packages. This will sometimes result in unexpected
result. For example, the condition hasTargetPackage('gcc') is likely
to be always true as it matches libgcc1.
For most of the time, we should do exact match instead of regex match.
So change _hasPackage function to do that. For the current sdk test
cases, the only place that needs regex match is '^gcc-'. This is because
there's no easy way to get multilib tune arch (e.g. i686) from testdata.json
file.
Besides, packagegroup-cross-canadian-xxx and gcc-xxx should be check in
host manifest instead of the target one. So fix to use hasHostPackage.
Also, as we are doing exact match, there's no need to use r'gtk\+3',
just 'gtk+3' is enough.
(From OE-Core rev: 595e9922cdbacf84cf35cc83f0d03cace042e302)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When determining whether to skip the test case, the check should be
done with consideration of multilib. Otherwise, we will meet the
following error when testing against lib32 environment.
No package 'gtk+-3.0' found
(From OE-Core rev: ce82ee46f4a7beb5663238b276e779e5c9657777)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a named argument 'multilib' for the hasTargetPackage function. Its default
value is False. When setting to True, it will try to get the correct multilib
prefix from the sdk_env, the environment setup script.
We need this because we don't want unexpected run of some sdk test cases.
The following steps will generate error.
1. Enable multilib for qemux86-64
require conf/multilib.conf
MULTILIBS ?= "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 ?= "core2-32"
2. bitbake core-image-sato -c populate_sdk
3. bitbake core-image-sato -c testsdk
The error message is like below.
No package 'gtk+-3.0' found
RESULTS - buildgalculator.GalculatorTest.test_galculator - Testcase -1: FAILED
As we don't have lib32-gtk+3 installed, the test case should be skipped when
testing against the lib32 environment setup script.
(From OE-Core rev: 163764ad4760a5fabf65640df5f968be98ad13d2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sumo release provides a transition period so that deferrals to first boot
via 'exit 1' can be converted to pkg_postinst_ontarget(). For the next release
however, postinst script failures should be treated as such.
[YOCTO #12607]
(From OE-Core rev: 42acb0ebde4e88bcdf34a541b700f19d8607abb0)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak recipe selftest-hardlink
- addition of libexecdir to simulate multiple directories
- add gdb.sh to run gdb from script which is invoked at test time.
- rename `hello' -> `hello1' to workaround name confliction with the one in lmbench
Add test_gdb_hardlink_debug to selftest/package
- run a qemu and invoke gdb.sh to gdb binaries of selftest-hardlink
- check gdb to read symbols from separated debug hardlink file
- check debug symbols works correctly
[Test without commit `package.bbclass: only one hardlink of separated debug info file in each directory']
2018-08-26 01:27:30,195 - oe-selftest - INFO - test_gdb_hardlink_debug (package.PackageTests)
2018-08-26 01:30:29,005 - oe-selftest - INFO - gdbtest /usr/bin/hello1
2018-08-26 01:30:36,539 - oe-selftest - INFO - gdbtest /usr/bin/hello2
2018-08-26 01:30:43,568 - oe-selftest - INFO - gdbtest /usr/libexec/hello3
2018-08-26 01:30:50,157 - oe-selftest - ERROR - No debugging symbols found. GDB result:
Reading symbols from /usr/libexec/hello3...(no debugging symbols found)...done.^M
(gdb) Function "main" not defined.^M
Make breakpoint pending on future shared library load? (y or [n]) [answered N; input not from terminal]^M
(gdb) Starting program: /usr/libexec/hello3 ^M
Hello World!^M
[Inferior 1 (process 320) exited normally]^M
(gdb) The program is not being run.^M
(gdb)
2018-08-26 01:30:51,180 - oe-selftest - INFO - ... FAIL
2018-08-26 01:30:51,181 - oe-selftest - INFO - Traceback (most recent call last):
File "oe-core/meta/lib/oeqa/selftest/cases/package.py", line 148, in test_gdb_hardlink_debug
self.fail('GDB %s failed' % binary)
AssertionError: GDB /usr/libexec/hello3 failed
[Test without commit `package.bbclass: only one hardlink of separated debug info file in each directory']
[Test with commit `package.bbclass: only one hardlink of separated debug info file in each directory']
2018-08-26 12:40:30,976 - oe-selftest - INFO - test_gdb_hardlink_debug (package.PackageTests)
2018-08-26 12:42:15,149 - oe-selftest - INFO - gdbtest /usr/bin/hello1
2018-08-26 12:42:24,064 - oe-selftest - INFO - gdbtest /usr/bin/hello2
2018-08-26 12:42:31,078 - oe-selftest - INFO - gdbtest /usr/libexec/hello3
2018-08-26 12:42:38,646 - oe-selftest - INFO - gdbtest /usr/libexec/hello4
2018-08-26 12:42:46,824 - oe-selftest - INFO - ... ok
[Test with commit `package.bbclass: only one hardlink of separated debug info file in each directory']
(From OE-Core rev: 104d07e57488f4a414fb5e1f60d0c8b0c02d6b4d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
skipIfInDataVar will skip a test if a value is in a certain variable.
(From OE-Core rev: 10b935c713748346aea6c36c2f41e0ae6c320821)
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't use subprocess.check_output() or subprocess.call() here since the one
who invokes runcmd() needs handle CmdError() exception (error out or ignore
it).
(From OE-Core rev: c3e7739987d804f7865428442479d5bece5ff2dd)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace usage of oe.utils.getstatusoutput() with direct subprocess calls.
(From OE-Core rev: 90c730a898f11adb2ecd377cdd913af83123bcb7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the original datastore returned by this function doesn't
always work as the tune isn't set back to the original. Fix it
to work like all_multilib_tune_list() in utils.bbclass and correct
the data returned.
(From OE-Core rev: 4e1dc858fbf671ef27089a2b9bcdc965fe19d698)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This does the same thing, but is more efficient in case st_nlinks
is (already) 1.
Depends on bitbake commit 7ae93cf40ab91965147055100432961436bce46c .
(From OE-Core rev: a09f8e32044c8daec2d2fb3ff0e830c21402df6e)
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Merge the two tests together as having them separate is pointless
* Test that ldd runs correctly
* Add in a dependency on the "ldd" package being installed instead of
the sdk tools feature
(From OE-Core rev: 80db456387fb63ee74d53a9719ab3997432f4c80)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its a pain to have to wait until oe-selftest finishes to see the
failures for example.
(From OE-Core rev: 4c499a1b10a0c2647b6a753b8f9cd934ae4ad0da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Periodically we'd see:
NOTE: core-image-sato-1.0-r0 do_testsdk: ======================================================================
NOTE: core-image-sato-1.0-r0 do_testsdk: ERROR: broken-runner
NOTE: core-image-sato-1.0-r0 do_testsdk: ----------------------------------------------------------------------
NOTE: core-image-sato-1.0-r0 do_testsdk: testtools.testresult.real._StringException: Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/meta/lib/oeqa/core/utils/concurrencytest.py", line 122, in _run_test
test.run(process_result)
File "/usr/lib/python3.6/site-packages/subunit/__init__.py", line 1194, in run
protocol = TestProtocolServer(result, self._passthrough, self._forward)
File "/usr/lib/python3.6/site-packages/subunit/__init__.py", line 514, in __init__
stream = stream.buffer
AttributeError: '_io.StringIO' object has no attribute 'buffer'
which seems to occur if a result arrives before all the runner threads
have started. The runner's result handling changes sys.stdout to a buffer
temporarily which can be seen in other threads and it can sometimes fail.
Since the tests are running in a separate process we don't need this buffer
handling in the concurrent case so only set when not parallelising. The
concurrent class handle setting buffer mode internally.
(From OE-Core rev: e2c66aa0f74d19fbc7e56af1fb440ad6473d3a8e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, error output such as that in the teardown can be lost
and processes may recieve signals they're not expecting causing other
strange errors.
(From OE-Core rev: 1e3f44737a15feb3128ba7fc0dbe896dd8782e07)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running this test case, we will see the following error.
AttributeError: type object 'BuildAssimp' has no attribute 'project'
assimp.py test case does not make use of SDKBuildProject, so remove
the import statement and the tearDownClass.
(From OE-Core rev: ca0a40a852abed981d54503ef2d86708471c821e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing kernel-devsrc package starts with a full copy of the kernel
source and then starts to strip out elements that are not required.
This results in extra time (I/O) and extra space being taken up in the
final package. The main purpose of the kernel-devsrc package has been to
build modules against the running kernel, not to include a full copy of
the source code for re-building the kernel. The end result was a
600M kernel-devsrc package.
This restructuring of the package uses an approach similar to other
distros, where the kernel-devsrc package is for building against the
running kernel and uses a curated set of copied infrastructure, versus
a mass copy of the entire kernel.
The differences in this approach versus other is largely due to the
architecture support and the split build/source directory of the
kernel.
The result is a kernel-devsrc package of about 10M, which is capable
of running "make scripts" and compiling kernel modules against the
running kernel.
Along with the changes to the copying of the infrascture, we also
have the following changes:
- a better/more explicit listing of dependencies for on-target
builds of "make scripts" or "make modules_prepare"
- The kernel source is installed into /lib/modules/<version>/build
and a symlink created from /usr/src/kernel to the new location.
This aligns with the standard location for module support
code
- There is also a symlink from /lib/modules/<version>/source -> build
to reserve a spot for a new package that is simply the kernel
source. That package is not part of this update.
(From OE-Core rev: 007ef1f468110b2698a27ea9a6d43fed5a0a9fc2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. So far, only qemux86[-64] support hw breakpoint, no matter whether or
not with kvm.
qemuppc: The oe-core configuration uses a PPC G4 system as the
default cpu but qemu doesn't simulate the hw breakpoint register for G4.
qemuarm: The arch more than v7 supports hw breakpoint, however arm use
v5 as default.
qemuarm64: We temporarily drop qemuarm64 for the moment. Normally it
will print debug info once, but endlessly when we trigger the break
point. Now it is hard to located the issue, but we will confirm it
later.
qemumips*: Kernel dosen't support hw bp for mips.
2. Syslog maybe not started, so we use dmesg to confirm.
3. Running 'ls' to trigger the hardware breakpoint test.
(From OE-Core rev: 176e50fb177dc40e439700d5f3f838dd7eaaa427)
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The debug info can not be written to trace buffer immediately
by thread. So we should sleep some seconds.
(From OE-Core rev: 5ccf8150b4c65f2feac16cc2881188f14d9e5390)
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- if POSTINST_INTERCEPTS is set, use the listed intercept files, or
- if POSTINST_INTERCEPTS_PATH is set, load from the listed paths, or
- if POSTINST_INTERCEPTS_DIR is set, load from it (for compatibility), or
- load from ${COREBASE}/meta/postinst-intercepts
(From OE-Core rev: 9ba2f2b1df277b2b881f68166d9cd1c19db66e23)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add definitions to the locale table for riscv architecture.
(From OE-Core rev: 624f6fd50da764cde71eb24e40742a48fa65d13c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sparseness test was sometimes working and sometimes failing depending
on whether sstate was valid. This adds an explict test of sstate
to the test for both hardlinking and sparseness. Tweak the test name to
cover the fact its tests sparseness too.
(From OE-Core rev: fe5b37c07b6d07c350516ab6bf849d6d86a84004)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Files when restored from sstate were missing their sparseness. Fix up various
functions to preserve this and make things more deterministic.
(From OE-Core rev: 055402e5504f041c346571e243c7cf0894955cad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Parsing all the recipes is annoying when trying to re-execute oe-selftest
and also unnecessary as its really just a sanity check. When the tests were
originally being developed the guard was useful but less so now.
Replace it with bitbake -e which is fast and checks the basic configuration
is valid.
(From OE-Core rev: acec5180b8d2731002979179e08439b615631e70)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to rpm, use copies of the ipk/deb directories for rootfs construction.
This means the image creation code can no longer "see" recipes wich aren't in its
dependency chain which is good for a variety of reasons including determinism,
incompatible recipe (e.g. systemd/sysvinit) package conflicts and locking
performance.
(From OE-Core rev: c7c5f4065c102fde4e11d138fb0b6e25bffe0379)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function is generic, tweak the variable names and move out the rpm specific
directory name to make it truly generic and reusable for deb/ipk.
(From OE-Core rev: dba876639b1fb8ea3ccb182c91e19966c4052115)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor the locale archive function from the SDK to also make it work during
general image creation. This reduces the size of the locales from 900MB to 220MB
in core-image-lsb-sdk.
The exception handling around subprocess was dropped as the standard subprocess
exception printing is better handled than the catchall exception.
(From OE-Core rev: 8ffd93bdb09b0a4a84b27dafcd684c6abba392ed)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new element to the hardlink test to check we also preseve file
sparseness during the packing process. This should ensure we don't regress this
issue again.
(From OE-Core rev: 0a4e6974b49bf68c4a4098d339b5d655e202a3fd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The log entry in results is altered to remove 'target_logs'. This
causes wrong log location in output.
e.g.
AssertionError: 1 != 0 : Log: /path/to/image/1.0-r0/postinstall.log
But when user wants to check the log, the user will find the log is
not present. The actual log file is /path/to/image/1.0-r0/target_logs/postinstall.log.
So fix to use the correct log location.
(From OE-Core rev: df3a2e21648d6b649ebda7e6032afbd63c939f2b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OETestDepends doesn't work with parallelism and in this case we don't
really need this dependency, it would just short out some tests quickly
in the rare case the esdk environment was broken.
Currently this is masking tests which is a much worse problem and we
can't make OETestDepends work reliably with parallelism so drop the
dependencies.
(From OE-Core rev: b3b1e1881240b8e2a32dd5c1dc3b7387f0819576)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Prefer collections.abc (new in Python 3.3) over collections for abstract base classes
- In Python 3.8, the abstract base classes in collections.abc will no longer be exposed in
the regular collections module. This will help create a clearer distinction between
the concrete classes and the abstract base classes."
- https://docs.python.org/3.7/whatsnew/3.7.html#deprecated
- see c66f9f8d39
(From OE-Core rev: e763151e1f7cfe9ea56de06f41769f8a3d74d219)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need target gettext to build, but nativesdk-gettext-dev (for nls.m4).
(From OE-Core rev: 0474326d79b7675dabe63f691733e8c6b24b2fb0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Executing strip action on kernel modules removes the signature.
Is not possible to strip and keep the signature, therefore avoid
strip signed kernel modules.
(From OE-Core rev: 4c47e5f171fa2603355e2f9183065ce8137a18c7)
Signed-off-by: Omar Ocampo <omar.ocampo.coronado@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were a lot of assumptions in the controller import
code of context.py which were not true anymore. These
assumptions reflected themselves by catching exceptions and
re-raising them with unhelpful error messages in other parts
of the code.
This commit does not fix the classes controller classes that
became broken after the refactor but at least it allows for
the exceptions to be thrown where the imports fail, thus
actually showing what exactly went wrong with the import.
An example of such an improvement is that before if the
controller class failed during it's init contructor the
controller would just be skipped and the task would just
complain it could not find the controller. Now for example,
if there is a NamerError due to a variable not being
declared, the user will get that report.
(From OE-Core rev: 719b0e88b875b067551067874778061f99b8c4b4)
Signed-off-by: Paulo Neves <ptsneves@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using syslog-ng as the syslog provider, oe_syslog test case fails
because it cannot find the syslog daemon. This is because it greps for
'syslogd' but syslog-ng's daemon is 'syslog-ng'. So fix it to check both
'syslogd' and 'syslog-ng'.
Also, when the test case fails, what I get is:
| AssertionError: 1 != 0 : No syslogd process; ps output:
<empty here>
This does not help user. The output is actually from the 'PS | GREP' command.
And when the 'PS | GREP' command fails, the output is always empty. So also fix
this problem. After the change, it looks like:
| AssertionError: False is not true : No syslog daemon process; ps output:
| PID USER VSZ STAT COMMAND
| 1 root 16476 S {systemd} /sbin/init
| 2 root 0 SW [kthreadd]
| 3 root 0 IW [kworker/0:0]
...
(From OE-Core rev: b180fbd9d93db1c6351e183fbc08fc81cdc240c0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build target won't cause the package task to run if things were already
built and in sstate. Ensure we run the package task explicitly to ensure
the test works as intended.
(From OE-Core rev: be20eb4f4ad77d9444028ca9632b74d5866d96b8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new SDK testcase that builds assimp, a project that uses cmake.
Using TARGET_ARCH and TARGET_OS which is now exported into the environment,
check that the generated binaries match the ELF headers we expect.
(From OE-Core rev: b4acfa11b35b47c86d2d83d7b0693284a8dc7495)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables multiconfig dependencies (mcdepends) to be used on
recipes using the following format:
task[mcdepends] = "multiconfig:FROM-MC:TO-MC:PN:task-to-depend-on"
For the sake of simplicity consider the following example:
Assuming we have set up multiconfig builds, one for qemux86 and one for
qemuarm, named x86 and arm respectively.
Adding the following line to an image recipe (core-image-sato):
do_image[mcdepends] = "multiconfig:x86:arm:core-image-minimal:do_rootfs"
Would state that core-image-sato:do_image from x86 will depend on
core-image-minimal:do_rootfs from arm so it can be executed.
This patch makes modifications to bitbake.conf to enable mcdepends, and
to sstatesig and staging.bbclass to avoid conflicts between packages from
different multiconfigs.
[YOCTO #10681]
(From OE-Core rev: f71bfe833c657244d2fd07b3b71e86081d7d1c04)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the devtool tests make changes to files under meta/ -
legitimately since we want these tests to be working with real recipes
and associated files. Unfortunately with the new oe-selftest
parallelisation this can break other tests if files go missing at the
wrong time (among other scenarios). To avoid this issue, simply take a
copy of the core repository and use that for these tests. (We copy the
entire repository since changing the path of meta/ influences COREBASE
and thus we need to have things like scripts/ alongside as well).
(From OE-Core rev: 2457cd57b4195924ef127f497efa2f34f411e660)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use SYSTEMD_BUS_TIMEOUT to set default timeout to 240s to avoid
timeout problem on slow qemu machines.
(From OE-Core rev: a5b1dcabdd84915eb0527be4e7bd64ab46860d9d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following error from systemd-udevd is not harmful. It's just
because our qemu targets are using eth0.
Error changing net interface name 'eth0' to 'enp0s3': Device or resource busy
Note that systemd is using a different network interface naming scheme
from traditional ethX naming scheme. To make this error message go away,
we could symlink /etc/udev/rules.d/80-net-setup-link.rules to /dev/null
to recover traditional naming scheme. But I'm not sure if this will
cause regression in user experience for systemd users of OE.
So just ignore this error message so that parselogs.py test case does not
fail.
(From OE-Core rev: f1735fed088ddda6517fa4ff6fbd6ef683b14878)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
