256M was found to be no longer sufficient, as the X server fails to
start with the modesetting driver and 3D enabled.
Only images that actually include X11 are adjusted.
(From OE-Core rev: 9dd0812acc73287287b48d28e0935baf7f545b58)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe is special and recursively references poky, the AUH should
ignore it.
(From OE-Core rev: 4e3876d86139e25b234456f09c14095a58eef585)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rationale - excerp from `info chown`
====================================
OWNER‘:’GROUP
If the OWNER is followed by a colon and a GROUP (a group name or
numeric group ID), with no spaces between them, the group ownership
of the files is changed as well (to GROUP).
Some older scripts may still use ‘.’ in place of the ‘:’ separator.
POSIX 1003.1-2001 (*note Standards conformance::) does not require
support for that, but for backward compatibility GNU ‘chown’ supports
‘.’ so long as no ambiguity results. New scripts should avoid the use
of ‘.’ because it is not portable, and because it has undesirable
results if the entire OWNER‘.’GROUP happens to identify a user whose
name contains ‘.’.
(From OE-Core rev: 185918234a07cb506d7d7464a49ac33972c7d963)
Signed-off-by: Kosta Zertsekel <zertsekel@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is otherwise unset leading to missing dependency warnings. Give
it the same default as used elsewhere in other recipes.
(From OE-Core rev: 0a1265f4dd90ad9524005ce91b3d0564ce2215e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The busybox-syslog rrecomends is proving tricky as it gets pulled in early and
there are conflicts between its use of update-alternatives and busybox needing
to provide those things.
We already have recipes using BAD_RRECOMMENDS to remove this dependency, it probably
makes sense to spell it out explicitly and allow it to be overridden more easily.
This patch does this, dropping the now unneeded BAD_RRECOMMENDS. It preserves
the dependency as a recommendation for now, further cleanup may allow simplication
of that.
This unbreaks certain build failures on the autobuilder, more as a workaround but
is a change we probably want to make anyway.
(From OE-Core rev: 544ade2d78f1375d9e93d6bf5842d857ddaf3530)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing kernel-devsrc package starts with a full copy of the kernel
source and then starts to strip out elements that are not required.
This results in extra time (I/O) and extra space being taken up in the
final package. The main purpose of the kernel-devsrc package has been to
build modules against the running kernel, not to include a full copy of
the source code for re-building the kernel. The end result was a
600M kernel-devsrc package.
This restructuring of the package uses an approach similar to other
distros, where the kernel-devsrc package is for building against the
running kernel and uses a curated set of copied infrastructure, versus
a mass copy of the entire kernel.
The differences in this approach versus other is largely due to the
architecture support and the split build/source directory of the
kernel.
The result is a kernel-devsrc package of about 10M, which is capable
of running "make scripts" and compiling kernel modules against the
running kernel.
Along with the changes to the copying of the infrascture, we also
have the following changes:
- a better/more explicit listing of dependencies for on-target
builds of "make scripts" or "make modules_prepare"
- The kernel source is installed into /lib/modules/<version>/build
and a symlink created from /usr/src/kernel to the new location.
This aligns with the standard location for module support
code
- There is also a symlink from /lib/modules/<version>/source -> build
to reserve a spot for a new package that is simply the kernel
source. That package is not part of this update.
(From OE-Core rev: 007ef1f468110b2698a27ea9a6d43fed5a0a9fc2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initramfs-framework is more modular and expandable. This change was
proposed in commit 28fc6ba761ed4a47efa7c43e7f7dff5e2fe72b5e
"core-image-minimal-initramfs: use initramfs-framework by default" but
reverted due to the selftests runqemu.RunqemuTests.test_boot_machine_iso
and runqemu.RunqemuTests.test_boot_deploy_hddimg failing. Since then,
the kinks have been worked out, and missing functionality that had been
missed (non-EFI installation module) has been added.
Since the PACKAGE_INSTALL variable was getting so long with all these
individual modules getting added, I also introduced a new
INITRAMFS_SCRIPTS variable to the core-image-minimal-initramfs recipe.
This variable makes the recipe look much cleaner, and also allows easier
replacement or additions to the scripts.
Fixes [YOCTO #10987].
(From OE-Core rev: 882ae0dcce2d96a7c286fc23b22b07972d3d8f93)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 32bit core-image-minimal-initramfs should be built when build lib32-iso, e.g.:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
IMAGE_FSTYPES += "iso"
$ bitbake lib32-core-image-minimal
Exception: FileExistsError: [Errno 17] File exists: '/path/to/tmp/sysroots-components/core2-64/qemuwrapper-cross/usr/bin/crossscripts/qemuwrapper' -> '/path/to/tmp/work/qemux86_64-pokymllib32-linux/lib32-core-image-minimal/1.0-r0/lib32-recipe-sysroot/usr/bin/crossscripts/qemuwrapper'
This was because:
lib32-core-image-minimal -> core-image-minimal-initramfs
core-image-minimal-initramfs -> qemuwrapper-cross
lib32-core-image-minimal -> lib32-qemuwrapper-cross
So we got the error, build lib32-core-image-minimal-initramfs can fix the problem.
(From OE-Core rev: eee3ec805cf150f1c701427a2d182a537a67e8f5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original initramfs-live-boot recipe RDEPENDS on udev, which is ok since
the init script relies some of its functionality on udevadm and such,
but on core-image-tiny-initramfs the init script simply drops to shell
after a basic setup, so udev is not needed.
This patch splits up an initramfs-live-boot-tiny recipe which does not
use udev, but uses busybox-mdev instead, eudev installed about 600
extra Kilobytes to core-image-tiny-initramfs userspace, by avoiding to
install eudev we achieve an even smaller footprint (almost 40% smaller).
(From OE-Core rev: 7725bad91b89a291a7099b2d99789a86b028f329)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building poky-tiny for x86-64 seems fine, but when executing qemu
it complains during boot time about not being able to execute init:
[ 5.409730] Failed to execute /init (error -8)
And then it drops to a login prompt (which it should't do on tiny)
This is supposed to be complaining about init's format, it only happens
on x86-64 architectures so perhaps is a 32/64 bit issue, but since
core-image-tiny-initramfs does not actually provide a traditional init,
the script is simply meant to drop to shell, we can workaround the issue
by specifying the kernel to run the init script via busybox's sh,
dropping to shell correctly on x86-64 leaving x86 unaffected.
(From OE-Core rev: f15de8cf177f8f736c180c1dcaa942a9931865d4)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
core-image-tiny-initramfs was used to generate a wic image, which was conceptually wrong
since initrafms recipes should only generate the boot artifacts that can later be used
by another recipe to generate an image using the tool of their choice.
(From OE-Core rev: 2a4c65636821be48a8e585491bec40b5048be25d)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise, we get timeouts, leading to errors:
pip._vendor.requests.exceptions.ConnectTimeout: HTTPSConnectionPool(host='pypi.python.org', port=443): Max retries exceeded with url: /pypi/pip/json (Caused by ConnectTimeoutError(<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7ff741bb3ef0>, 'Connection to pypi.python.org timed out. (connect timeout=5)'))
WARNING: TOPDIR/tmp/work/qemux86-poky-linux/build-appliance-image/15.0.0-r0/temp/run.do_populate_poky_src.185123:1 exit 1 from 'pip3 install --user -I -U -v -r TOPDIR/tmp/work/qemux86-poky-linux/build-appliance-image/15.0.0-r0/rootfs/home/builder/poky/bitbake/toaster-requirements.txt'
DEBUG: Python function do_image finished
Complete log at [1]
[1] http://errors.yoctoproject.org/Errors/Build/43393/
(From OE-Core rev: 8291156c30e54a05ad455dda2b8540a570bb0f4a)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file lists the licenses that the OE-Core meta data falls under
but should not be used as a LIC_FILES_CHKSUM, use the MIT license file.
(From OE-Core rev: e12fa3ac08962accb6585e2aa1c486e7852d174d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The vmdk/vdi/qcow2 IMAGE_FSTYPEs predate wic. As such, they provide
some similar underlying functionality in order to produce a "disk" image
that in turn can be converted into different formats that various
hypervisor types work with. They do not however provide the ability for
other disk image types to be converted into these same output types.
Furthermore, they are less flexible than what wic does provide. This
drops the old style vmdk/vdi/qcow2 types and re-introduces them under
the CONVERSION_CMD framework. The equivalent of vmdk is now wic.vmdk
and so forth for the other types.
(From OE-Core rev: 929ba563f1bc7195c4981b8e139c432b2cc388ea)
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 28fc6ba761ed4a47efa7c43e7f7dff5e2fe72b5e since it causes
runqemu.RunqemuTests.test_boot_machine_iso and runqemu.RunqemuTests.test_boot_deploy_hddimg
to fail in oe-selftest.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the initramfs-framework for initialization by default due to
the modularity and expansibility.
[YOCTO #10987]
(From OE-Core rev: 28fc6ba761ed4a47efa7c43e7f7dff5e2fe72b5e)
Signed-off-by: Ng, Wei Tee <wei.tee.ng@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"pod2man" went missing from BA, but it is required.
This patch fixes the Toaster error:
<...>
ERROR: These tools appear to be unavailable in PATH, please install
them in order to proceed:
pod2man
<...>
[YOCTO#11144]
(From OE-Core rev: 562c184d52db2182eafde3cf9866606145784deb)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not rely on pip3 being installed on the host.
Use pip3-native instead.
[YOCTO#10909]
[YOCTO#11022]
(From OE-Core rev: 0c349f06b6b026e9bbd3e9a8188e3d8645fd00d9)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The logic is scattered all over the place, but amounts to
"install, unless the rootfs is read only". Let's express that directly.
(From OE-Core rev: 697804229a172125ce7d3bfc9b343812d6fe3240)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When booting core-image-tiny-initramfs, since we want to live on initrd,
on purpose, we never find a rootfs image to switch root to,
this causes init to show an error as it would with other images,
this patch replaces the message shown to the user, avoiding confusion
when it was indeed a successful boot.
(From OE-Core rev: 3378c322247f5c261f40d06480379da9a24e3082)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
