Fixes [YOCTO 5463]
Added the TUNE_ARCH variable. Also placed a cross-reference to
TUNE_ARCH in the TARGET_ARCH variable.
(From yocto-docs rev: 85d2a49323e0040b263b6d7f08fd036a25297b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1949]
Updated the following tasks to note that they "clean" out some
areas when run:
do_populate_sysroot
do_deploy
Also made some notes to the do_cleansstate task about attempting
to clean remote mirrors.
And, made a change to do_cleanall to specifically mention that
DL_DIR is cleaned.
(From yocto-docs rev: 7e532b17ccd89e43d3661c733ce1f06a52066c29)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a new section to start the Migration chapter. This
section will hold general migration issues that are not tied
to a specific release.
(From yocto-docs rev: e78ae7c64ae5fa7e7a5b1f804fb40b5690a4e899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul reported that "buildimg" was being used as the class name where
it should have been "bootimg". Not quite sure how this slipped through
but it has been fixed now. There were five occurrences.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: fdd6a6725bd22e4272a99a3da179cd69c4a221a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the end of the section to point to a wiki page
with more information.
(From yocto-docs rev: ba310c34844e9e496d7ff1164691930d4f330f93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a stale link. Updated to point to the published
HTML file now and to mention that you can find it in the
Source directory.
(From yocto-docs rev: bc51935372cfd81a77f201768173d8b1eb1677c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6400]
Replaced the sentence in the note to specifically note that the
genericx86-64 BSP has been added for 64-bit Atom systems.
(From yocto-docs rev: ad2cbe806580c880708e5e60435046b07258a537)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a ptest section to the "Moving to the Yocto Project 1.6 Release" section.
Fixes [YOCTO #6400]
Added a new section named "Package Tests (ptest)" to the migration
section stating that ptest is built but not installed by default.
I also added some cross-reference links to a usage section and to
the ptest.bbclass section.
(From yocto-docs rev: f752867265a1299b1d2790ae59a990a7991a6108)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistency on how we refer to a task name throughout
the YP manual set. The proper way is "do_<taskname>". Some
occurrences did not include the "do_" prefix. These have been
fixed.
(From yocto-docs rev: b32821bb0d3e6de7bca68b25c662a023526a10c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a view wordings to more accurately describe what was
going on. This was feedback from Paul Eggleton's review.
(From yocto-docs rev: 6152a849c0e26178ce13a29b1f353d1b2912427c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Added some code to suck in the XSL templates that support
permalinks.
(From yocto-docs rev: 713a17465df48de2ece3845bbd7a8bf972e353b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5521]
I created a brief note in the do_fetch subsection of the
"Taking a Closer Look" section to deal with how the build
system uses checksums during do_fetch to re-execute stuff
if a file:// listed in the SRC_URI has had its contents
modified.
(From yocto-docs rev: 7b857635f2663af7c1d5e8aa87239472a5b47919)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I created a new section in the dev-manual titles
"Creating a Custom Template Configuration Directory" that describes
how the build system uses the template local.conf and bblayers.conf
and conf-notes.txt files as a basis when creating the real
deals in the build directory's conf folder. The context of this
is so that the user can create their own directory with their own
template files for repeated configurations and to create a custom
conf-notes.txt file should they want the setup scripts to display
some custom list of targets.
I also modified the two script references in the ref-manual for
oe-init-build-env and oe-init-build-env-memres. I needed to
link to the "how-to" section and added a bit in there about how
the scripts go about forming the conf files in the build directory.
(From yocto-docs rev: c07fb7082fe08387bbc546b2a23620dedc7127b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added detailed requirements for the three LSB type images
in order for the build to create an LSB-compliant image.
Massaged the weston image a bit.
(From yocto-docs rev: 01fee2bebe76512ab5707212fc8d78df20d83126)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I implemented some review feedback from Paul Eggleton on these
variables:
TARGET_CFLAGS
BUILD_OPTIMIZATION
SDKMACHINE
IMAGE_ROOTFS_ALIGNMENT
IMAGE_DEVICE_TABLES
EXTRA_IMAGECMD
SSTATE_MIRROR_ALLOW_NETWORK
PACKAGE_ARCHS
SDK_PACKAGE_ARCHS
(From yocto-docs rev: 6fd804376367449494d5a5cfeb7e9bb2f4c04de1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of examples to show how to set passwords.
This is the -P option for adduser.
(From yocto-docs rev: 2726fcd3b3c2a5144b23af6ab342832c242f85c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
