Fixes [YOCTO 15536]
The postactions retrieval actions currently rely on scp executed
individually on any file or directory expanded from
TESTIMAGE_FAILED_QA_ARTIFACTS. Unfortunately, symlinks are not preserved
with this mechanism, which lead to big storage space consumption. Things
may go even worse if those symlinks create some circular chains. This
mechanism then needs to be updated to preserve symlinks instead of
following them during copy. There are multiple ways to do it:
- create a local archive on the target and execute scp on this file
- use rsync instead of scp for all files
- create an archive and pipe it to ssh instead of storing it onto the
target
The first solution may create pressure on targets storage space, while the
second assumes that rsync is installed on the target, which may not be
true. So the third one is a compromise: tar is very likely present, at
least through busybox, and no disk space is used on the target.
Replace the current per-file scp call by a single call to tar run on the
target. Retrieve the generated compressed archive directly from SSH output,
and feed it to another tar process but on host, to uncompress and extract
it at the same place as before.
(From OE-Core rev: 8b5c66c91d94f4c8521fe9443e65d86063dba5e5)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 4aeb10aa38efc6768928fbb74985e36e972b8e46)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
We're seeing reproducibility failures where some packages don't appear
in the "from sstate" builds. The common factor is these are all recipes
with PROVIDES = "virtual/XXX".
In a full build from scratch, these are build but in a build from sstate,
there are situations where they aren't. For now, to try and keep builds
working, work around the problem until we can better look into the problem.
It is likely recent taskhash imrovements have caused this to occur more
regularly.
(From OE-Core rev: 9f0eba6aba5e9b37975f86556c1234b145a0859e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 68086a333acc54390e4e589ef928dc90da3edb48)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
With the retry for the -SIGTERM, it is possible to still see that error
after the 5th attempt and mark the run a success. Check for any
non-zero status in the final check and error out to close the gap.
While there, make the error print match the one above and be a little
more verbose. Also, I'm seeing it take roughly 6 attempts on my local
(very slow) system to pass. So, increasing the number of attempts to
10.
(From OE-Core rev: 52a67132d4d7e656a39d87c03b1c6162018e8908)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 3c3ebe591eef6e0479d623ec2237cfea16db5c80)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Ensure we show the failing exit code in case of failures.
We're seeing autobuilder failures with -15 (SIGTERM) which is probably from
slow boot/init. Retry in these cases for now.
(From OE-Core rev: 1bd6b0e29650c34652c1027b6975eb8620a73c55)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 127d3bd8d5509ae17e359c1365859fd362ffc74f)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
On exceptionally slow systems, the ssh test can intermittently fail due
to a race between when ping works and the networking applications being
brought up. To work around this issue, add some retry logic when ssh
fails to connect. According to the man page of ssh, "ssh exits
with the exit status of the remote command or with 255 if an error
occurred." So, only retry if the return code is 255, and limit the
number of retries to prevent it looping forever.
(From OE-Core rev: f6eacc39dc44c6b3dea9c44836addce5d03f20ef)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit f0fe0b490d309cdf1c97754f85a61b5b948b7f28)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Newlib generally requires additional components to function. Skip the
cases where newlib is known to not work.
(From OE-Core rev: 99a5ca1c2c2b7b3193710bc681fbf05936025b5b)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b9934755554e40d9980b90c3d541f4c702203561)
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Additional test cases for debug symlink generation both binaries
and static libraries.
This also has the side effect of testing for race conditions in the
hardlink debug generation and stripping.
(From OE-Core rev: 39823d3211411e661320e1164ba4c50370804425)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 7171f41c07a39a7543bb64f075d38b8e74563089)
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The SCP protocol was deprecated in favor of the SFTP.
For the legacy SCP protocol scp should be run with "-O".
Instead of adding "-O" on the scp_options ssh oeqa we can
require the openssh-sftp-server to be instaled on the target.
This way the test will work more deterministic regardless of
the host machine client used.
For the old fashion clients still using legacy SCP protocol
the openssh-sshd server will be used, for the new ones using
the SFTP the openssh-sftp-server will be picked.
(From OE-Core rev: 7629a47d6cac36c78184788010f754175853bb03)
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
(cherry picked from commit 2f43da91ba20d18bc419bca7651bb383a51f20af)
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Fix this error where 'coredumpctl info' warns that the coredump is still being
processed:
```
AssertionError: 1 != 0 : MiniDebugInfo Test failed: No match found.
-- Notice: 1 systemd-coredump@.service unit is running, output may be incomplete.
```
(From OE-Core rev: ad1ce64f5c1f22a7b10025d8cba20dc74354ac81)
(From OE-Core rev: f7e824477ef75fcea8e0b777278413304def631c)
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit ed562345d5a5f2edb649028553199f3f7966e19e)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Where we're using DL_DIR in sdk archive to try and cache testing artefacts,
copy into the cache so that it gets populated and this doesn't have to be done
manually. Currently we're making a lot of repeat requests to github as this
wasn't being populated.
(From OE-Core rev: 048467673ceb075277c5a4fbbb40b9c3e41864e0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a3284958a2cc6c90a5fac26976bddc23f821c972)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The test was failing with core-image-full-cmdline which uses sleep from coreutils instead of sleep from busybox.
(From OE-Core rev: 2b71641b9c1b8f7e67527d2242a6a65b1e849ded)
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 8497edf0c56da34ea7b7509b8fcd46fcba2fd0e3)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The builtin command "sleep" was getting executed instead of the busybox binary.
Hence "pidof sleep" was empty and the test was failing.
(From OE-Core rev: dfde05c64a7d9f01f09a34e76509ef80501f0db7)
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 3188f3f0718b8a59bc9e3cae4cdf74e82bdb86c3)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Similarly to centos 8, centos 9 doesn't support the render device we need
for this test.
(From OE-Core rev: 37ddcbd51ec39e5df94b307085cec2a045fea4a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit c2be3afabf84f287c90b61ae2509728a6634fb8f)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
If usrmerge is in DISTRO_FEATURES, assumptions in one of the tests would
fail. Improve the test so it works in both cases.
(From OE-Core rev: 4dc35667143f19a369bdea9ce2f011a04132509c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit afa211746a2aa1993a54cc5a5e1937679341da8e)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
If usrmerge is in DISTRO_FEATURES, assumptions in one of the tests would
fail. Improve the test so it works in both cases.
(From OE-Core rev: 01ccccb949bd82e89dae4679ff5b30ada6672d9a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 68a27d307a7042e242c49cf3d069469f40e09902)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
To enable this test to work with gcc 14, pass the option to make
warnings non-fatal. Also upgrade to version 5.4.1 from 5.3.1.
(From OE-Core rev: c0c58c9acbcbed26f95864dc5e40b5995252ce4a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit c3df6287ae26dc9d7f11eb7e26fdbcaefe4dfead)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
librdfa hasn't had a commit for a decade now and as such has problems
with modern compilers (specifically gcc 14.1). Switch the recipe
creation test to something much simpler that we also control: dbus-wait.
(From OE-Core rev: 311e7b5b9ee4f0d96a376a06f01c5bfd379ca244)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit d801de1f702d8d0def55011b5b6ad39d85f978f1)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
This reverts commit ab6d3e3d64
from poky repository.
The previous reverted commit was a workaround. The fix
"oeqa/selftest/devtool: fix _test_devtool_add_git_url"
tackle the issue. So, the workaround is not needed anymore.
(From OE-Core rev: fd30cc2ab99fe6a8e4beb29d9cb46a772db8b8d8)
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 731f47ecfd8ad6558aac629806810789c623986b)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
This patch is a follow-up to the bug#15466.
As a reminder, the bug was about devtool’s submodule detection
checking for HEAD when a version is being passed.
As Vincent Kriek pointed out:
the --version that is being passed to devtool is only used for
setting the PV value in the recipe. To take into account the tag,
we add --srcrev to the command:
devtool add --srcrev v3.1.0 --version v3.1.0 mbedtls git://git@github.com/ARMmbed/mbedtls.git;protocol=https
Changes to _test_devtool_add_git_url have been made to take
into account the srcrev. srcrev will be passed as an optional
parameter because the test_devtool_add_git_style1
does not need the srcrev contrary to test_devtool_add_git_style2
Fixes [YOCTO #15466]
(From OE-Core rev: c297b78454da2a668e62dec95d7b6eb6e5429480)
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reported-by: Alexandre Truong <alexandre.truong@smile.fr>
Suggested-by: Vincent Kriek <vincent@coelebs.dev>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a8686f3641e4407dee3d807898ffd620e2732b78)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
If testtools and/or subunit modules are not found we get the following backtrace
(example for testtools):
NOTE: Starting bitbake server...
Traceback (most recent call last):
File "<..>/poky/scripts/oe-selftest", line 60, in
<module>
ret = main()
File "<..>/poky/scripts/oe-selftest", line 47, in main
results = args.func(logger, args)
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 391, in run
rc = self._internal_run(logger, args)
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 377, in _internal_run
rc = self.tc.runTests(**self.tc_kwargs['run'])
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 161, in runTests
return super(OESelftestTestContext, self).runTests(processes, skips)
File "<..>/poky/meta/lib/oeqa/core/context.py", line
91, in runTests
result = self.runner.run(self.prepareSuite(self.suites, processes))
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 154, in prepareSuite
from oeqa.core.utils.concurrencytest import ConcurrentTestSuite
File
"<..>/poky/meta/lib/oeqa/core/utils/concurrencytest.py",
line 22, in <module>
import testtools
ModuleNotFoundError: No module named 'testtools'
Fix this by adding a custom callback on -j/--num-processes parameter to
check testtools and subunit modules. Fallback to serial testing if
missing. This strategy is already used in sdk/context.py
(From OE-Core rev: ffd1db7d7813f6da22c0d9ef5fde6738058f1eb2)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
(cherry picked from commit 35284404473b2c2d9f69594582868ed66ef3525e)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
-l option is specific to df provided by coreutils, if df
applet from busybox is used then it does not work and fails
like below
Fixes
df: invalid option -- 'l'
BusyBox v1.36.1 () multi-call binary.
Usage: df [-PkmhT] [-t TYPE] [FILESYSTEM]...
DEBUG: [Command returned '1' after 0.71 seconds]
DEBUG: Command: df -hl
Status: 1 Output: df: invalid option -- 'l'
it seems worth a compromise to show remote mounted filesystems if any
during ptests and it works with both df implementations
(From OE-Core rev: 82a0df6cc2c5b18cb48fd8c3be26a11f4016d98d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
(cherry picked from commit 75cc1ea4348a2294fdc5ab20530fcff27056ff06)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
go.bbclass uses a special do_unpack function that causes the git root
to be different from S. Verify that it unpacks as expected.
[ YOCTO #15483 ]
(From OE-Core rev: 71adf7c18215faf73454be79d7b51f2a0c338c0f)
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit fab0c737b95b8d0c0bbf58336bc308776c956406)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
We don't have a test to check if we can correctly devtool update-recipe/finish
into another layer. So update the existing test_devtool_update_recipe_local_files
to also check the updates into another layer.
(From OE-Core rev: bd44c895d36e246a25c7a6e40bf9f4089dc7a297)
(From OE-Core rev: 0532a6292edbe68303b6d85017ebcdb36a60886f)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jeff Harris <jefftharris@gmail.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Sometimes the debuginfod selftest fails due to a timeout, because it
spends too long scanning a huge deploy directory that due to what tests
were ran previously can contain 30K packages.
The test only needs a subset of the feed, so use the new localpkgfeed
class to construct a minimal feed before running the test.
[ YOCTO #14937 ]
(From OE-Core rev: 0795169be206f1d4d140fe378e2476a44d0ce02b)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 855376f518b28248ccd82ef5b2e89e6a8c970542)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The problem is the following:
AssertionError: 'gitsm://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master' != 'git://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master'
Mbedlts made changes to their repository, adding a sub-module, thus the
assert triggers an error with the url:
git://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master
456a54da8e
was the upstream change.
To fix the issue, the url has been changed to:
gitsm://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master
(From OE-Core rev: 9ac737fbe05c85ec8333b396ce2f89de6654916f)
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under some load conditions, the result event can come back before the
command complete event. If that happens, the code would hang
indefinitely.
Rework the code to wait for both events and avoid the hang.
(From OE-Core rev: 8cfc94a4404c54bc73eab9f98d9da1f84c2135ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds to run_test_sstate_creation so that it also tests
that sstate directories don't accidentally pickup umask permissions
from the user upon creation.
[RP: Python style tweaking]
(From OE-Core rev: 7d6eb828e97ad3f27d94efdccd920fb2aef36743)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dbus-wait command returns a timeout after 60s but reports "success", detect this.
Unfortunately it does effectively break the test as the signal is nearly never being
correctly detected since it was already sent.
For that reason comment out the code instead too.
Also fix the loop conditional as the logic was incorrect and it was looping
indefinitely when an image match didn't occur.
(From OE-Core rev: 89c930e9e4b38b116edcba59e88621a39f8bda67)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch uses dbus-wait to wait for matchbox to be up. Once that
happens, it sets a timeout of 60 seconds and takes a screenshot
and compares it, every 2 seconds. If diff=0 it passes. If the timeout
ends, it fails.
(From OE-Core rev: 287b4f0a8244f7214f6a1aaa84ef16cc528f8326)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Excluding riscv64 due to mouse rather than a touchscreen which adds a
moving cursor, so the diff ends up > 0. Need to fix the image to use the
touchscreen rather than mouse input.
(From OE-Core rev: 7f7032c7613abd62ce510c98211c75fc7c5e7090)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mouse panel icon can move when the time changes between 3 and 4 digits.
Ideally we'd fix the alignment of the clock on the panel but to get the
tests working, increase the size of the mask for now.
(From OE-Core rev: 8ec02142ab98741749281bdb29d5973c96b839d7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Allow tools to be found from the host PATH so that imagemagick from a buildtools
tarball/sdk can work
* Reformat the code to have imports at the start of the file and have more standard
formatting and whitespace
* Always save copies of the images, the space imapct is negligle compared to the
debug win
* Write the images to ${T}
* Use bb.utils.mkdirhier() instead of more complex code
* Restrict the tests to images containing matchbox-desktop
(From OE-Core rev: d09989b49517830297654e4d1d150aaa8723c41a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This takes the work rburton did on image screenshot testing and
expands it.
Right now this works with most of the qemu based machines except for
- qemuppc64
- qemuarmv5
- qemuriscv32
- qemuloongarch64
See "Known Issues" further down.
This test takes a screendump of a qemu image, blanks out the clock
and compares it to an image we have on record. If the diff is exact,
the test passes. If not, it stores the image in build/failed-images and
fails out.
In order to enable this test, you will need meta-openembedded/meta-oe in
your bblayers.conf for imagemagick and the following in local.conf:
IMAGE_CLASSES += "testimage"
TEST_SUITES = "login"
TESTIMAGEDEPENDS:append:qemuall = " imagemagick-native:do_populate_sysroot "
Known Issues
------------
The main issue is that I've yet to find a gating factor that would allow
me to tell when the qemu instance is fully up and rendered. I've tried a
few tactics here, (dbus-wait, qmp) but for now a disgusting
time.sleep(30) is there.
You can replicate this by running qemumips. The screen load takes forever,
but you even see it on qemux86 where the Home and Workspace Switch icons
will sometimes take a while to fully load.
Eventually I'm going to have to take multiple screenshots and compare
them, but then you get into the issue where the question is, is the diff
greater than 0 because it hasn't fully loaded or something is actually
incorrect.
There are the issues I know about:
- runqemu qemuppc64 comes up blank.
- qemuarmv5 comes up with multiple heads but sending "head" to screendump.
seems to create a png with a bad header.
- qemuriscv32 and qemuloongarch64 don't work with testimage apparently?
- qemumips64 is missing mouse icon.
- qemumips takes forever to render and is missing mouse icon.
- qemuarm and qemuppc return incorrect width
- All images have home and screen flipper icons not always rendered fully at first.
The sleep seems to help this out some, depending on machine load.
(From OE-Core rev: dc7cefbaccde50df6c4396e66d50659a45e00631)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Co-authored-by: Ross Burton <ross.burton@arm.com>
Co-authored-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A change in QEMUMonitorProtocol.cmd() requires that we either pass in
kwargs instead of an argument dict or move to cmd_raw()
cmd() was renamed to cmd_raw() (and command() was renamed to cmd())
See:
37274707f6684750ab4f
My concern with this patch is that I haven't seen this come up with
utils/dump.py which also uses QemuMonitor's run_monitor. If it is
occuring, this should fix issues there as well
(From OE-Core rev: 9665d38ab60c1c3b27887c2b1a6396f13a1b33ea)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust selftest to git-add the directory with newly added patches,
as the new minicom recipe has no default patches, and thus no directory
with them (and the selftest assumed it does).
(From OE-Core rev: 1fb2aa3f242ef20f8edfb518164b629258a04dd4)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since go-1.21 GOPROXY needs to be set explicitly, otherwise it fails with:
- GOPROXY list is not the empty string, but contains no entries
This fixes the selftest
(From OE-Core rev: c491d967858c01fead21495f44f1a9f8cdf8e833)
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recently introduced postactions module can raise, on failing ptests,
the following warning:
WARNING: core-image-ptest-glib-2.0-1.0-r0 do_testimage: Can not get host
disk usage: [Errno 2] No such file or directory: '/usr/bin/df'
The issue is likely not happening because of df absence (to be confirmed
amongst the variety of workers) but because of the wrong path. Fix it by
letting subprocess search for df, passing only the binary name. To make it
work, we also have to reset the environment, otherwise the environment
configured before running bitbake will be used, and search will fail.
(From OE-Core rev: da7cc5def2839a0e15d07244f858847479c12caa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the GDB related tests. Verify GDB finds the correct source
files.
(From OE-Core rev: 67eed460c0bf18d23f2c9180f195417895acfd55)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the target under test can be a virtualized guest, when some tests
fail because of disk usage (see [1]), also fetch disk usage statistics from
host to allow checking whether a host disk space saturation could affect
running tests.
[1] https://bugzilla.yoctoproject.org/show_bug.cgi?id=15220
(From OE-Core rev: 2ab3a0935b1e7a016402f149da1fc01b38d7af55)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to be able to create actions that could store new files during
failed test post actions, we need to split artifacts directory creation
from artifacts retrieval.
Create a new dedicated action to create artifacts main directory so we can
add actions creating files in this new directory, without worrying about
actions order if at least this action is set first.
(From OE-Core rev: 5d796586a9342f4f984494a5b493dbaf77af7026)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage is able to detect whenever a test run leads to some tests
failing, and execute some actions in this case. The only action currently
defined in such case is to retrieve artifacts from the target under test,
as listed in TESTIMAGE_FAILED_QA_ARTIFACTS
In order to be able to add multiple actions, define a central function to
gather all "post actions" to run whenever a test has failed
(run_failed_tests_post_actions). This function contains a table listing all
functions to be called whenever a test fails. Any function in this table
will be provided with bitbake internal data dictionary ("d") and the
current runtime testing context ("tc"). Isolate all this feature in a
dedicated postactions.py file inherited by testimage.
This patch does not bring any functional change.
(From OE-Core rev: c01aa8df0613a103859b4431d3cc5056b2fef1b8)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multiple places in oeqa need to get the log output path, and redefine a
small helper to accomplish this
Define this helper in lib/oeqa/utils/__init__.py and import it wherever
needed to allow using it.
(From OE-Core rev: 01b1a6a5a4e7cede4d23a981b5144ae9c8306274)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a test for 13904's fix by creating a convoluted set of recipes
with USERADD_DEPENDS in non-alpha order.
(From OE-Core rev: bfff81195cb9ba2493e366022470b2e0051d8071)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a new base-files bbappend was added to meta-poky, it causes selftest
failures. Whilst this isn't ideal, workaround that issue for now since
the append is being added for security visibility and changing the tests
to support this more generically looks invasive.
(From OE-Core rev: 7cf85204f0943bf741ffce5c4105340197c714df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rust testsuite was redirecting command output to a file, which made it
hard to debug failure cases since the logs were not available to print to
the console.
Rework the code so it uses the existing popen logging and hence allows us
to improve the error logging situation and make debugging failures easier.
(From OE-Core rev: ac82dc43b8151ed34c4ad51e9ab7f4a612990486)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support to detect the "mesonpy" build-backend for recipetool create.
* Add oe-selftest case for creating a recipe for "siphash24" from pypi.
https://pypi.org/project/siphash24/
This is by far the simplest recipe using the mesonpy build backend.
Upstream does not provide LICENSE file(s) and we do not detect the
LICENSE so don't check for that result in the test. Likewise, upstream
does not define HOMEPAGE, so skip that result.
(From OE-Core rev: 256749322671d2f4ea994db671d73c4de10e1723)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python 2 is gone and we don't need the abstraction now, drop the remaining usage
of this variable.
The definition in python3-dir.bbclass is left for now for other layers.
(From OE-Core rev: b566b1e32c7993d1ab7795562f648e52ce186a70)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
