I changed 'linux-yocto-2.6.37.bbappend' to 'linux-yocto_2.6.37.
(From yocto-docs rev: 0eb284374ef9dfb26142ae4d0254a0fe4056d0ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to tweak the viewing area to get two figures to display
correctly in the PDF version of the file.
(From yocto-docs rev: 89b2618e11c05744f54a9fbd39cd899117a2affc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This figure provides a conceptual look at the repos and file structures
needed to run the example. Or, for that matter, to get set up to
modify the kernel.
(From yocto-docs rev: d469449f1d416a6a96bdde297daae68a9f3094e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed a major re-write of this section that touched all
aspects of it. This was necessary due to the fact I could not get
the example running because of not understanding the repo location
and branch needs to set it up.
(From yocto-docs rev: 160e66d0c8ddf11584c53306def916a45a05f62b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I separated the section that explains how to set up the poky-extras
git repository. This used to be in the kernel area right after
creating the bare clone and the copy of the bare clone. I thought
it would be better as a stand-alone bulleted item.
(From yocto-docs rev: 4ea917c7218f238e2b0d2bb377a97f4b1f5eb1f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added instruction on how to set up a bare clone of the linux yocto
kernel files and then how to create a clone of the bare clone.
Finally added a part about setting up the meta-kernel-dev repository.
This setup should do it for those that want to modify the kernel and
not have to download source files from the upstream everytime they
make a change.
(From yocto-docs rev: 90ae8249d119d5db17507eea37eb6deb0822a682)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section for the example that ensures the image for qemu
is available.
(From yocto-docs rev: a3ca52cb7088ec85502b507093082f35f23befd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed an anchor point in the Index of Downloads bulleted item for
reference from other documents.
(From yocto-docs rev: 7d4f96d20667fbf5f52e25840b39f1994b1c4cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
various things going on in the kernel example. Far from complete.
(From yocto-docs rev: 0c0548b79589a606f91bdb39e5a2ece71f4c108e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that describes how to get the local Yocto Project files
I was referencing the general section. I have added a more specific link
to the bulleted item that describes how to get these files.
(From yocto-docs rev: 2b03c4d39a83d731581a6cd63a5c9e5c7e4cb57b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the flow section for the kernel modification section I added a new
step for getting a local copy of the linux yocto kernel files. The section
indicates that you need a local Git repository of the files and then
references back to the Getting Started section for an example.
(From yocto-docs rev: 6601e06635c6f57ddbf8109cc1dfdc8a8e7f74af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that shows how to get various groups of files needed for
using YP I added a bulleted item to show how to clone the linux yocto
kernel files. this section will be referenced from the kernel example
flow section and the kernel example appendix.
(From yocto-docs rev: 4126d1456290d677ab8dc1d02d11aac6eb8add46)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the user should use Git commands..no probably about it.
(From yocto-docs rev: 84b0b4e8c7b6b89c81503f40ba855e9f624887c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the image description list to the Yocto Project Reference manual
where it really belonged. Appropriate references were added.
(From yocto-docs rev: fc74439c09d1f45cdfbc24d972045e574ffa91ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another edit pass through the high-level kernel modification flow
list. this is the list I will work from while trying to actually do
the task.
(From yocto-docs rev: ac9b2d8961abec9016c6c1e10222d0af36c4be4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the introduction paragraph to cast the chapter more for YP than
just generic newbie information. Also, added three screenshots for
the source areas at Dave Stewart's suggestion.
(From yocto-docs rev: 26d3c58ff6295515c593c8b0b12dc3d6952b752a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PDF version was not allowing the image to have enough room for proper
display. Increased to 8.5 inches.
(From yocto-docs rev: 425abd53eac41a9466af45e277be8b0d8202e27d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the note about manual differences in the legalnotice area.
this produced a better looking note.
(From yocto-docs rev: 8d44a5fba7c52d5798758467e93c9c64e48d512a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1675c31aa02a4daed356af4ea9c78d493a9a2597)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dev-manual-model.xml I included two references: one to the
BSP Development Example and one to the Kernel Modification Example.
I had to add the target "id" stuff to both dev-manual-bsp-appendix.xml
and dev-manual-model.xml
(From yocto-docs rev: bcae1e723610e1769f0a524e3c1d9918c7cb1061)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need for this chapter any longer. Re-org has ash-canned it.
(From yocto-docs rev: 085a514133f4326c1da372b95507a3665e8f91ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the cases chapter and added an appendix for kernel example.
(From yocto-docs rev: 60c8ec3444c08e94468ff349b676652c7f6ff0cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New file for the kernel example. this will be an appendix.
(From yocto-docs rev: fca7e4fbb3d1e738700349d6169d7217c04e4b31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this is now in the model chapter. Eventually the cases chapter
will disappear.
(From yocto-docs rev: fde20eede9f04899b61742b05ce73c97b2737bf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added structure to contain sub-sections for system (BSP and kernel)
and application overviews.
(From yocto-docs rev: 028f65219b001081d221d63f368ff06066a95a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "models" chapter is going to be the overview section for the cases.
Thus, the cases chapter will disappear. This is a first step in that
direction.
(From yocto-docs rev: fe3985db8e1dbc7bff6565d3624bccac0f809621)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the more general BSP development information was more appropriate
in the dev-manual-cases chapter. I removed this information and left
example-specific (mostly) text.
(From yocto-docs rev: d44c0fa8bdea9a2cad51ae3ca4b861a12d9fcdf9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the BSP example is now in an appendix, I re-wrote this section
to overview the case.
(From yocto-docs rev: c0d88c6050bd17d65d8fe8c8abb227998fd4c11e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section for changing the recipes was deep and complex. So I broke
it into several sub-sections.
(From yocto-docs rev: f964b7644502fe5995c57de4a7a4fff47f71cf79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the Getting your Base BSP section to reflect the example only.
Previously, there was a lot of information in there about getting BSP
files that was deemed universal and was moved to the getting started
chapter.
(From yocto-docs rev: addcbca37e3dfad27b388245a4085cd0a2747177)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
