This will help in meta-linaro where it will be able
to utilize maximum recipes from OE-Core and thereby
keep close compatibility with OE-Core gcc recipes
(From OE-Core rev: 3c9f7eb2e2d70869a71a584eb1ba670b50a88379)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should help in speeding up compilation at the expense
of a bit less info when gcc ICEs but we dont get many gcc
ICEs and therefore using --enable-checking=release is
right balance
(From OE-Core rev: a84c097cc7c52a856601e546880440d9375b0e30)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If build system has those libraries installed
gcc configure will pick them up. We want
consistent builds so we disable them since we
do not (yet) support them
(From OE-Core rev: 523df15bcc21e1749771cca757613f3520243b8e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
create a new package to have lto dev packages bundled
(From OE-Core rev: b98fb95c594117d165a31795b6fa7b6cb583d598)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--with-native-system-header-dir is relative to sysroot which
is what we want --with-headers is deprecated anyway
(From OE-Core rev: 2f7ac32b57e047cdaf01e0b6f77509117dbbd14c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need -isystem=${target_includedir} in there
(From OE-Core rev: 573949096d51bde4961b2301c20c966c324a66bd)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new recipes for gcc-4_7-branch right now gcc 4.7.0
is latest release from this branch
(From OE-Core rev: 3f8fee75e598ad0994acc5da0a612e6eca4f35f6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its better than duplicating the overrides
(From OE-Core rev: 7159dad19f8cfd3e7e95523da63e91370744da7f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed for adjusting meta-linaro where linaro
gcc recipes leverage the core recipe infrastructure and
modifies minimal to keep compatibility with OE-Core
so that any changes in OE-Core gcc recipes does not
trigger changes in meta-linaro.
(From OE-Core rev: cb01b2a4fc82e62eacc4441fddc3fdfb04a3acf3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this option by default points to /usr/local no matter
what so we cant let it sit on sidelines otherwise it
will access host machine's /usr/local which may not
be desired. So disable this option. This also helps in making
gcc's shared state more consistent
(From OE-Core rev: eee3658366e1ae9d3e429b3d3c968938d8d0f00e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we stash the libgcc install tree and then reuse that
to populate libgcc recipe later. This mechanism does not work
for gcc 4.7/trunk since now libstdc++ needs access to build tree
of libgcc. This patch stashes the gcc-cross build tree
and then reuses this in libgcc as well as in gcc-runtime
recipe builds.
Now we build libgcc in the libgcc recipe instead of just
using the prebuilt install tree
core-image-minimal build/run tested on all qemu machines
(From OE-Core rev: 7cf9f0597648c0bdaa080976d74acfbfc4c8443d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building gcc-cross-canadian libgcc is built using
headers from gcc-crosssdk and not the target sysroot
because we do not pass proper CFLAGS for target bits
so it ends up using CFLAGS that were meant for compiling
canadian gcc itself. It does not show up as a problem
when building SDK with eglibc because eglibc-nativesdk
and eglibc have identical headers. The problem shows
up clearly when you try to build uclibc based meta-toolchain
since then nativesdk libc and target libc are different
(From OE-Core rev: 0e904103e9bd7fdb31bfcc129067511f9f45701b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building on distros like fedora17, which has /bin/perl,
the target perl scripts get perl path also as /bin/perl.
And that is not correction path of perl on the target.
This commit avoids this error.
| error: Failed dependencies:
| /bin/perl is needed by quilt-0.51-r2.i586
NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato-sdk.bb,
do_rootfs) failed with exit code '1'
(From OE-Core rev: f091895d7dacd601f52edb0f0a08bdfa7e6d2461)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sunaudiodev module is sunos specific so we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: a92847ed7671386225c0738d62780a9f1b043789)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_tkinter module needs tk module along with tcl. tk is not yet integrated
in yocto so we skip the check for this module.
Avoid a warning by not adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: 3f1be431054b3947bee9a2503eea1a3cefb38f4c)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_bsddb module can be built only with db version between 4.1 and 4.7.
Avoid a warning by not adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: d974ad03c58d7a221ebe3d59c57607928fbbd435)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python should search for db.h in inc_dirs and not in a hardcoded path.
If db.h is found but HASHVERSION is not 2 we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: 79d0332f21769338a9f904308d8a808486e10fea)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was added for 64bit host machines. In the compile process python
is checking if platform is a 64bit platform using sys.maxint which is the host's
value. The patch fixes this issue so that python would check if TARGET machine
is 64bit not the HOST machine. In this way will have "dl" and "imageop" modules
built if HOST machine is 64bit but the target machine is 32bit.
[YOCTO #1937]
(From OE-Core rev: 4993f50744882ee384cb8fb106ad209f0d887b3f)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a fix from 1.16.x upstream to use fd instead of stream-based
I/O in dpkg-deb, which avoids the use of fflush() on an input stream
(the behaviour of which is undefined by POSIX, and appears to have
changed in the version of glibc introduced in Fedora 16 and presumably
other systems).
Fixes [YOCTO #1858].
(From OE-Core rev: 2aefac2a2c508da11a73e29d82947ac627d31118)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
patch.bbclass orignally pointed at /usr/bin/quiltrc for an empty
version to ensure that no user setting were picked up, change this
to /etc/quiltrc in the Native sysroot since we now have a native
sysconfdir.
Make sure that the quiltrc is actually installed in the Native
sysconfdir, not the target, so fix this after the recipe split.
(From OE-Core rev: 1af73900cea82e63fb0f94e6f057144f723146ec)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe gcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/include
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm/bpabi-lib.h
(From OE-Core rev: aff48c514174ba5fa3bb1e5df5293376b567da09)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrtn.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrtn.o
(From OE-Core rev: b17c02d223455680324227f8de17feb8ab3e7b68)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe binutils, the following files/directories were installed but not shipped in any package:
WARNING: /usr/bin/embedspu
(From OE-Core rev: 447d77b9e33a68f748c96a152eae19148e43ed7c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed already upstream patch:
automake/automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch
Rebased these patches to the newer code:
automake/prefer-cpio-over-pax-for-ustar-archives.patch
automake/python-libdir.patch
Changed the tarball name from bz2 to gz, as the bz2 tar ball
is not published for the 1.11.3 version.
[RP: Fix python.m4 to preserve the tweaks that allow us to build python modules]
(From OE-Core rev: 94bf72aeae035ffade75bd9343937888bbb09c82)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bump PR value due to the commit
c6c701f424aeb502d20ff02d02712e56f4e259a5.
(From OE-Core rev: b6ee2880fccf04923ede31256ea418451cbf2e46)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The move of libcrypto to /lib instead of /usr/lib has broken the _hashlib module
compilation. There were also a number of other failing modules which should
have been building correctly. This turned out partly to be the /lib issue
but also due to a number of native paths creeping into compiler commandlines.
These changes add in /lib as part of the searh directory and remove
a number of host contamination issues within setup.py. Post release we
should really further go through this file and just delete large sections
of it as its hard to be sure what strange paths python is injecting as
search paths.
This patch also fixes issues where re-execution of the compile task
would corrupt the Makefile in various ways, again leading to puzzling
paths within the configuration.
(From OE-Core rev: 20e2761e1da1cb5dcd267e161f2a6b6a429e9f39)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -nativesdk pseudo wrapper setting LD_LIBRARY_PATH turned out to be a
bad idea since it can mix up different libc and lib-dl verisons which
may or may not work depending on the phase of the moon.
As an alternative to solving the original problem, this patch drops the
symbol version requirement on memcpy which allows pseudo to work with
libc's back to 2.7 which should be sufficient for our supported targets
using nativesdk.
[YOCTO #2299]
[YOCTO #2351]
(From OE-Core rev: c6c701f424aeb502d20ff02d02712e56f4e259a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix addresses various issues seen in qemux86-64 images:
* scroll bars in matchbox-terminal not working
* files not appearing in pcmanfm
* warnings on the console from glib/gobject about invalid gdouble values
Its due to an emulation issue in qemu which the backported patch fixes.
I managed to debug it to a specific function, Khem found the qemu patch
to backport, thanks Khem!
[YOCTO #1906]
(From OE-Core rev: 69d083f8b8d8f7d095ed5682d305870c4d93fe62)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an error when build meta-toolchain-sdk on Ubuntu 10.10:
| Installing NATIVESDK packages
| Processing task-sdk-host-nativesdk...
| Processing task-cross-canadian-mips...
| error: Failed dependencies:
| libcurl.so.4 is needed by qemu-nativesdk-0.15.1-r5.i686
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
ERROR: Task 21 (/buildarea2/lyang1/poky/meta/recipes-core/meta/meta-toolchain-gmae.bb, do_populate_sdk) failed with exit code '1'
This is because qemu would depend on curl if it happened to be
available at build time and could confuse the -native and -nativesdk
librbaries.
[YOCTO #2305]
(From OE-Core rev: 566ad643efd03db34b59a427f48ca55ce613cf89)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After building perl package, re-execution of compile task recursively
substitutes the path, making it an invalid path.
Fixed to prevent recursive substitution.
Similar case as [Yocto #2194]
(From OE-Core rev: 16542d982d86d42d3189d47a8180f0f71646a9ca)
Signed-off-by: Venkata Ramana Gollamudi <ramana.gollamudi@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generated parser had warnings regarding signess and return check
which makes Linux Kernel's perf tool from 3.4 release to fail without
those patches.
(From OE-Core rev: f3d7197252d1ede627a561fbd5b3b7fb759bf75b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes automake-nativesdk build on such distros to put perl
interpreter path in the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by automake-nativesdk-1.11.2-r2.x86_64
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
The second sed command is for such a case:
eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac'
This line has two "/bin/perl" and we can't use a line number to tell
sed which line it is since the line numbers in different files are
defferent.
[YOCTO #2304]
(From OE-Core rev: ee7a86c06c2289f01aa5f1da958ce51523495572)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes autoconf-nativesdk build on such distros to put perl
interpreter path in the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by autoconf-nativesdk-2.68-r6.x86_64.rpm
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
The second sed command is for such a case:
eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac'
This line has two "/bin/perl" and we can't use a line number to tell
sed which line it is since the line numbers in different files are
defferent.
[YOCTO #2304]
(From OE-Core rev: 393908e53b243b16ab984da7f073be371e062946)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl recipe's do_configure() does some manual sed replacements over
the entire WORKDIR. Fix the following issues with this:
* Skip patches, which fixes re-execution of do_patch after do_configure
has run once
* Ensure that the replacement operation does nothing if do_configure is
re-executed
* Avoid unnecessarily modifying /usr/include paths within documentation
that will end up being packaged
* Fix a quoting issue in the expression used in the grep command that
ended up causing files that did not contain .*\.h after /usr/include
to be matched and modified.
The files modified during do_configure have been compared before and
after this patch to ensure there are no unexpected changes. Some
/usr/include paths that are not within documentation are no longer
being substituted however these are all within comments or scripts for
other Unix operating systems that are not applicable.
[YOCTO #2194]
(From OE-Core rev: 19255032e7744fce5cbe466e4869ded378d3b4f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was found to cause issues on the Yocto autobuilders and fixes do_compile
failures when guile-native has been relocated.
(From OE-Core rev: d928e91a57e6e9dfa6a7d4e888e1e1064d7fc668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need consistent configuration files for opkg so we might as well always use
the full list. This is equal to PACKAGE_ARCHS in the non-multilib case.
This fixes various multilib failures with ipk multilibs.
(From OE-Core rev: bc85abc5013d0c831cc3c3823df45536c293aaba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the do_unpack task is re-executed, the sed_done stamp was not removed, the
sed commands wouldn't re-run and the build would fail in do_compile. This
patch ensures the stamp is in ${S} and that we clean that directory
when unpack runs so it is a build from sctatch at that point.
[YOCTO #2194]
(From OE-Core rev: 2b190155d74d4369c61d26b1f4f0c3cce389ddbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sed command run during do_compile isn't idempotent. This change fixes it
so that it is and the compile task can be re-executed.
[YOCTO #2194]
(From OE-Core rev: c9dcfbd87d749baa0a4948738055193982aad26d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a patch patching both configure and configure.in. Since the recipes
all autoreconf, this is pointless and means subsequent patch tasks fail.
The fix is to only patch configure.in.
[YOCTO #2194]
(From OE-Core rev: 1d8c40d5f2119b4c4ae8a9b2645ae572ea9a54ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were puzzling failures when you make a force recompile of any gcc
component. The error was in do_configure with cross-compilation badness
being detected in config.log files.
gcc is different in that many of the config.log files are generated during
the do_compile phase. This means this host contamination issue has always
been present but only shows up on a rebuild.
The fix is to force the appropriate configuration variable to "none required"
then gcc won't look in the bad locations.
[YOCTO #2279]
(From OE-Core rev: e7135f14f3ef37f93f5c28b319464f3d6dd9b8da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There can be a conflict between the nativesdk libc and the host system's
libc. It is assumed the nativesdk version is of an equal or higher version.
This is a particular issue for pseudo if its loading a system binary
since the system's libc might be used of an older verison which would
then confuse libpseudo.so when loaded as a preload.
To avoid this, set LD_LIBRARY_PATH so the nativesdk libc is always
used.
Since we now use --without-rpath, we can remove the MAKEOPTS RPATH workaround.
[YOCTO #2299]
(From OE-Core rev: a481fe3b9883aa744be3253e2b4b27e6e46eb059)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
