The quoting in get_imagecmds() is hard to read. We can simplify the constuction
a little to make this easier to parse and reduce complexity slightly.
(From OE-Core rev: da5d038f955bf47155a0f217dba2f96e263bcad8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* otherwise strange error like this:
ERROR: Logfile of failure stored in: /OE/shr-core/tmp/work/armv7a-oe-linux-gnueabi/libtool-cross-2.4-r1/temp/log.do_package_write_ipk.25551
Log data follows:
| ERROR: Package already staged (/OE/shr-core/tmp/sstate-control/manifest-nokia900-libtool-cross.deploy-ipk)?!
| ERROR: Function 'sstate_task_postfunc' failed
NOTE: package libtool-cross-2.4-r1: task do_package_write_ipk: Failed
ERROR: Task 11 (/OE/shr-core/openembedded-core/meta/recipes-devtools/libtool/libtool-cross_2.4.bb, do_package_write_ipk) failed with exit code '1'
is shown in this case with package_ipk twice in INHERIT
* Thanks to Richard for fix
(From OE-Core rev: f2fe5e840b8aa0558b5462ef2c7517b2f14ec2ea)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When 'kernel-misc' is empty do_rootfs will fail when including 'kernel-modules'
The proper fix would be to have a whitelist for the 'kernel-modules' meta-pkg
(From OE-Core rev: bb72bd56101698b7fe166dd02fdca07d06a6eb8b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Tested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, as a specific example, one has both gtk+-native and gtk+ runtime
providing gdk-pixbuf-loader-*, and you can get bitbake preference conflicts as
a result if you have preferences specified for both gtk+ and gtk+-native for
other things.
(From OE-Core rev: 41d77ac37f606e54293826ba1e94a4254bddbfa6)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing infrastructure uses an external build tree which references the
kernel source in the work dir. If run with rm work, building external modules
will fail.
This patch places a configured source tree in sysroots. Striking a balance
between minimal size and minimal maintenance is difficult. A fully configured
tree is about 500MB after a clean. This version leans on the side of caution and
removes only the obviously unecessary parts of the source tree to conserve
space, resulting in about 170MB. The arch directories would be some additional
pruning we could do. Given examples from the devel package from distributions, I
suspect this size could be reduced to 75MB or so, but at the cost of a much more
complex recipe which is likely to require a great deal more maintenance to keep
current with kernel releases.
Care is also taken to clean the hostprogs in scripts, and the modules are
responsible for building them as needed. Although it is unclear to me if this is
really necessary, especially considering that modules put these bits back as
soon as they compile. If we are not generating an sstate package, I suspect we
can ignore these.
Please try this with your modules and let me know how it does. I tried to take
non linux-yocto kernel recipes into account, but I have only tested with
linux-yocto and the hello-mod recipe so far.
(From OE-Core rev: a9d41062e24a6b99661b3a5256f369b557433607)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Duplicate entries in PACKAGE_ARCHS causes problems with rootfs
generation. For example multiple architecture entries in opkg.conf
will confuse the opkg package manager.
(From OE-Core rev: 06aca3de95483e5086b0231df070bac76a6e3c19)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #908] Added CPPFLAGS into the environment file and added
--sysroot to it.
(From OE-Core rev: 360daf019101d9b4d08ab1e3d279b08c02e9749e)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Shows a warning during sanity checking if the scripts/bitbake wrapper is
not being used
* Check to see if pseudo is working during sanity checking, and if it
isn't an error occurs (if we are using the wrapper script and pseudo
has been built; otherwise it is a warning).
Fixes [YOCTO #653]
(From OE-Core rev: 0b06b69992dd3df1dfff7bde694d7ad23d8d15a0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous change used egrep instead of fgrep. We need to use fgrep because
there are expression like syntaxes in some file names, we need exact matches.
(From OE-Core rev: 0de88dc9aa30f29ec1ab5cc0c541c8be859392ab)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The additional configuration should have been there from the beginning. The
purpose of these config files is to have a consistent Berkeley DB configuration
even if the underlying RPM version changes -- or the RPM macros change.
This likely would not cause any problems until we attempted an upgrade of
either BDB or RPM.
(From OE-Core rev: a0682191e0743ed8ec1d30567eb26d4cde864ee8)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Image recipes can now add their ssh server of choice by adding
ssh-server-dropbear or ssh-server-openssh to IMAGE_FEATURES.
(From OE-Core rev: dbf59f0af238d9fced0040c1e7379fa81f0507cd)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For safety, always delete the stamp files in sstate_clean regardless of
whether the manifest file exists or not.
(From OE-Core rev: f781c35da9a11eefdb06bda72ca89753df863efa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid deleting stamp files whose names contain the current task's name as a
substring. This will be especially important for example if do_package_write
is ever made an sstate task (as it would previously have deleted the stamps
here for do_package_write_ipk etc.)
(From OE-Core rev: ea743ea30e2289733d27979e8ec921648342da0e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows recipes to insert a custom task in between building *Image and modules
>From OE .dev revision 615876fe218dc3feb4a3df9e6546a7b1a6376800
(From OE-Core rev: a2cc999d663407d17f41e1b0344361944993fa86)
Signed-off-by: Koen Kooi <koen@openembedded.org>
Acked-by: Graeme Gregory <dp@xora.org.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
below is the history on this class. Documentation for newly introduced SOURCE_MIRROR_URL
is already present in oe-core
commit 0ef914b250df46a41348479446214575668943fb
Author: Eric BENARD <eric@eukrea.com>
Date: Wed Nov 3 13:28:54 2010 +0000
own-mirrors.bbclass: allow mirroring of scm fetched packages
this way, it's possible to setup a local webserver (for example
using busybox httpd -p "8081" -h backuped_download_dir) serving
a presiously fetched download directory and to build wihout the
need for an internet access
this can also be used when connected to know to know which packages
are missing from the local mirror's directory (and thus are fetched
from internet as a fallback), it's possible to run the server this way :
busybox httpd -p "8081" -h backuped_download_dir -vv -f | grep -B 1 response:404
to get the name of the missing packages.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
commit 1b661974e3f8f844f6ec4cdb7bb42cef9595b626
Author: Marcin Juszkiewicz <hrw@openembedded.org>
Date: Sat Mar 10 14:10:06 2007 +0000
own-mirrors.bbclass: added class which can be used to set PREMIRRORS from config
- SOURCE_MIRROR_URL is new variable which point to source mirror which will be
used before fetching from original SRC_URI location.
(From OE-Core rev: 0dd3f7ccd170c8eae1014f5fd66a0e30fed7ad0c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #797]
During rootfs generation, if other RPM packages are being wrtten
this could cause a failure during the solvedb generation. We
add a shared lock around the RPM package building. This will allow
multiple RPM packages to continue to be written at the same time, but
prevent rootfs generation and RPM package generation at the same time.
(From OE-Core rev: 1d5ca654a482f582c75faf546140dfd6064da73b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The debug directory before was below ${WORKDIR}. Unfortunately if
something was based on a git tree, it meant that "git" was the
directory name being preserved for usr/src/debug usage. The patch
moves to using "${WORKDIR}/.." as the base, to ensure that the
WORKDIR naming is used in usr/src/debug.
(From OE-Core rev: dbc752c75786b0985fbeb4986467ae01290f424a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If one package is configuring when automake is built, the aclocal-VERSION
directory can be created or removed and this can confuse the configure
process.
Since we always run automake-native, it should always be using the
autoake-native aclocal directory for automake files which is the
result of this patch.
(From OE-Core rev: 2a15188d631a97dc20940f7edc801212e191332f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes ie setuptools, without this patch it RDEPENDs on python-core-native, which is not RPROVIDED by anything
* imported from OE 8377b8ec57f35b9e5b81a74c77f68fd6e02949c8
(From OE-Core rev: 65317f21736293cc4eeb9a404e9f01043df7565d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Now qemu can handle lower values we can chnage this sanity test
to check of values if less than 65536
(From OE-Core rev: 5f172d8b9b829554f3d884a9007a33fff7dcc187)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes [BUGID #241]
The kernel hostprogs are built for the host architecture. They should not be
deployed to the target, and they should not be included in an sstate package
which might get reused on a host of a different architecture.
As we don't build many out-of-tree modules, this patch takes the approach of
building the hostprogs as part of the module compile process with a
do_compile_prepend() routine in module.bbclass.
We don't have to clean the hostprogs as modules depend on the kernel being
populate_staging, so its done with the staging directory by the time we run.
(From OE-Core rev: e807fc977770cb64a217768672c18437ea8f3057)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For those recipes which use git repo and have tag information, we can use tag to trace the version change. For other no tag recipes, we still use their
commit checksum to trace their version change.
(From OE-Core rev: 30343a72b89167b46ff4cc33be6ada2fd4b13a59)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the way the ELF size is compared to ensure that incorrectly
sized ELF binaries are captured during the file scan.
lib/oe/qa.py is changed to accept a bitsize as a parameter. Instead
of previously defining true/false, it now takes "0" undefined, "32"
32-bit, and "64" 64-bit as the size argument. This allows us to
preserve existing behavior of only loading one ELF type, while
allowing the function to be able to discover the size on it's own.
(From OE-Core rev: 17dae13fabe2932a47ecc86fcafb1d177226513f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [BUGID #598]
The explicit addition of "bash" before "make menuconfig"
is clearing variables that are required for pseudo. The
end result is that menuconfig often fails silently with:
ERROR: ld.so: object 'libpseudo.so' from LD_PRELOAD cannot be preloaded: ignored.
Removing bash from the menuconfig SHELLCMDS variable fixes
the psudo problem.
(From OE-Core rev: b909f12a92c86fd2fe9348eeec455e2c9ef71f1a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_setscene task only exists for rebuild support now as all its other
functionality has been superceeded. The rebuild task currently crashes due
to removal of the working directory and therefore isn't working for anyone.
It also interacts extremely badly with the newer sstate technology to the
point of being dangerous.
Summary, if we want rebuild support it needs a reimplementation so remove
this version and all its remnants and hacks.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUG #776]
When using the RPM solve databases, we have to lock our operations
to avoid removing it while it's in use.
The same lock is shared by the rootfs_rpm.bbclass
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Add a new create_cmdline_wrapper() function that takes cmdline options
for commands that need different directories
Related to [BUGID #775
Signed-off-by: Saul Wold <sgw@linux.intel.com>
RPM has the ability to validate files that have been prelinked, however
the necessary configuration and staging was not done properly. Resolve
this issue by fixing the macro paths, providing the missing RPM macro,
and correcting a defect in the way the prelink image class was working
with the necessary configuration file.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
[BUG #756]
Fix bug #756. The rootfs contains a control file /etc/rpm/platform
that specifies the default system platform, as well as patterns for
compatible architectures. This file was not being setup properly due
to a misunderstanding of the format in a previous patch.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Refactor the function to eliminate additional interations/walks of the
filesystem..
Elimiate multiple runs of the external 'file' command as well.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
We now support two styles of debug information generation, the '.debug' style,
which is the same as previously implemented. This style simply splits the
debug information and makes it available in the same general directory.
/bin/foo -> /bin/.debug/foo
The new 'debug-file-directory' style splits the debug information and places
it into the single debug-file-directory, /usr/lib/debug:
/bin/foo -> /usr/lib/debug/bin/foo.debug
Both also find and copy all referenced source code to a new /usr/src/debug
directory. This allows the -dbg files to be used for stand-a-lone debugging
on or off the target device.
File stripping is now handled as a seperate operation from file splitting.
This allows us to split the debug information, but also leave it in the
original file -- or prevent the debug information from being split.
Also enhance the comments within local.conf.sample to provide a better
understanding of the control the user has over debug file generation.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
When doing package split, we use hard link instead of copy, which can
save about 10% disk space when building poky-image-minimal.
If fail, it will fall back to the copyfile function.
[Updated by Richard to use os.link and avoid an exec() call per file]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
We rely on Bashisms when spawning a terminal so ensure that bash is used
when using devshell and menuconfig.
Fixes [BUGID #119]
Signed-off-by: Joshua Lock <josh@linux.intel.com>
